HD2 not turning on after custom fROM flashing - HD2 General

Hi all,
I know how often these threads come up and I'm sorry to be posting one myself. I have used the search function to help me sort the problem out, but I just seem to be stuck.
Ok, so I had 1.48 official WWE ROM on my HD2 and thought of upgrading to a custom ROM unlocking the 576mb RAM.I used the following 'Lost in Asia Preloaded' ROM.
I did a HSPL before this and went on to install the ROM. The installation was unsuccessful and all I was getting was the white HTC screen from startup. Even after taking the battery out/red button reset, the problem was not fixed. I searched around a bit and did the following:
'you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh. copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh. phone off. hold volume down. tap power (keep volume held). phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.'
This installation was unsuccessful as well and now the phone will not turn on and I'm getting an exclamation mark in a black screen.
Could anyone please help me out? Sorry for being a noob at this, I don't get the chance to keep myself updated about all the advancements in ROM development.
Thanks in advance for your help.

heh, seeing as you are quoting me I'll have a go at helping.
my first thought is that you didn't use the correct stock rom.
where is the phone from? did you buy it outright or on contract?
what country are you (was it bought) in?

Question 2 - can you get in to bootloader? (power off, making sure there is NOT a leoimg file on sd card, hold down volume, tap power, keeping down vol pressed till it starts to three coloured screen)
If you can get to that screen, look for the SPL bit, what does it say?
Hopefully something like 1.42.0000 or 1.42.HSPL?

Hey thanks for the quick reply. Yeah I did use your advice from a different thread.
Answer to the first question: I got this on contract from T Mobile UK in November.
Answer to the second question: I had a look again on the initial advice by you, saying that I should use the original ROM file. as stated before it was 1.48 and I was using 1.66 to fix the phone. Using the 1.48 image file has now brought the phone back to life and it now seems to be working fine. But I am stuck on 1.48.
About the SPL: Volume button held down and tapping the power button brings up a screen showing SPL-1.42.0000 XE
I wanted to upgrade to a more recent version of the ROM namely 1.66.707.1 with a more recent Radio version as well. Though flashing a recent custom ROM would be the answer. more ram would not hurt as well! Any help about how I might be able to go about this? a link to the right guide would be helpful as well.

Heh, glad its sorted. Heres a few pointers.
Your stock rom is the T Mo uk wwe 1.48 rom. Keep a copy of that handy just in case you ever break it again. That one will always (well, nearly always) take your phone back to stock if you do the sd card method with the leoimg file.
When you are flashing, you should idealy always use USB method, NOT sd card method - Reason? because flashing an official (eg 1.66) rom using sd card will not only overwrite your original rom, but also overwrite the phones SPL (including HSPL, thats how to uninstal HSPL for warranty purposes).
For flashing both official roms, or cooked roms, you should instal HSPL and then use USB method to flash the rom.(Same goes for flashing radios)
The only time you need to use sd card method is when you want to go back to factory default, and then you should only do so with that T Mo UK file.
If you flash a bad rom that wont boot, no problem, because HSPL will still be installed, because you used USB method, , , so just pick a different ROM and flash again from the pc, over USB, job done.
SD card flashing is risky unless you are absolutely sure what you are doing.

To move to 1.66 (or in fact any rom you like) do this
Instal HSPL
run the 1,66 installer from the PC (NOT SD CARD!)
wait for it to flash
Done.

Great thread guys!
Do we really install HSPL? because if the installed one is the official 1.48... the official 1.66 should be instalable by USB, right?. this is my case and I'm a little confused...
Qq

In my opinion it is best to install HSPL, and then instal the updated (or cooked) rom using USB, that way your SPL is protected by HSPL.
Put simply, you want to protect your SPL, and the best way to do that is to avoid flashing using sd card. With HSPL installed you CAN install any cooked rom, and you CAN install the official updates (1.66) with no effect to your SPL.
I should point out that if you do NOT have your original stock rom available you won't be able to uninstal HSPL in the event of needing to return the phone, but if you DO have it available, (or you dont mind the possible warranty void) then go for it.

quiquevich said:
Great thread guys!
Do we really install HSPL? because if the installed one is the official 1.48... the official 1.66 should be instalable by USB, right?. this is my case and I'm a little confused...
Qq
Click to expand...
Click to collapse
If your phone lets you instal 1.66 via usb without HSPL then go right ahead, using USB will not affect your SPL. If you are provider locked, and there is no provider 1.66 available (example o2 uk havent released a 1.66) then you can instal HSPL and then use the HTC 1.66.

Related

HSPL Back to original SPL anyone succeed it ?

Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Did you try to install the ROM from HTC website or did you find an Orange specific ROM?
It is an orange specific rom. cause it is a branded handy.
I even try from HTC website one but no satisfaction. I think it is normal by this one ?
I have a non branded "german" device.
I decided to go back from the HSPL to the stock SPL.
I wanted to flash with the Turkey 1.61 rom to have after this procedure the newest radio 2.07 on it.
I have followed the steps from bepe
But my SD card has a "goldcard" file on it.
Go to the HSPL thread and see my post #383
http://forum.xda-developers.com/showthread.php?t=611433
I have noted down all outputs during flashing.
At least I would give it a try and use a "Goldcard" to get back your original rom.
Hope it helps & Good luck!
dingolino
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
SD card should be formated FAT32. The original one is FAT16
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
tictac0566 said:
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
Click to expand...
Click to collapse
doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
yes confirm
tictac0566 said:
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
Click to expand...
Click to collapse
I confirm: it happends to me: when I flashed the 1.61 HTC official rom from my SD, it replace the HSPL by the original SPL of HTC.
hi all, just want to share..
stock spl is 1.42 and after hspl 1.42hspl or 1.42.6666 if i'm not mistaken.
if to unsintall this hspl, i use flash using sd card method and it will re write radio and spl back to 1.42.
i also using turkey stock rom, but we cannot flash turkey stock rom using sd card method as it will rewrite spl and will give you error. wrong region. if this happen, in 3 colour mode, run you hspl. when it restart, make sure you push volume down button to get back in tricolour mode. if you not pushing vol down button, it will also boot in tricolour but hspl wont work, happen to me, spl back to 1.42.000. the flash using custom ruu.
just sharing with you guys.
Steve0007 said:
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
Click to expand...
Click to collapse
It should be LEOIMG.nbh.
dont forget you might want to use MTTY to do task29 to format the device instead of CustomRUU.exe
tbh you can probably use the RUU from HTC if you have HSPL anyway.
p.s. yeah LEOIMG.nbh - LEOING.nbg made me smile - finger-twister
Okay I have tested restoring SPL1.42.0000 on a vendor-id'd phone.
Tried 2 ways of formatting the SD card:
a. formatting the sd card to FAT32 via Diskdrive mode connected to pc
b. Formatted in HD2 using onboard utility in HD2.
Tried 2 images but not the vendor-id image since I do not have that image.
a. Vendor ROM but in different language
b. Stock ROM HTC
Tried 2 ways of changing SPL back to 1.42.0000
a. Reset + vol down shows a 1 second message "Checking.", after that it immediately goes to the blue-green-red bootscreen showing bootloader 1.42.HSPL
b. From bootloader connect USB to pc and flash using stock RUU.
All combinations of above I can not restore SPL. Must be because HD2 requires correct ROM image + correct vendor-id.
Is there possibly a way to remove HSPL in some way without the original vendor image? Goldcard?
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
[★] said:
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
Click to expand...
Click to collapse
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
htc12345 said:
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
Click to expand...
Click to collapse
Oh sorry man
Goldcard also tried and no luck.
Every time I reboot to bootloader it gives the colored screen, proceeds to white screen with blue letters, in an instant shows: "Loading..." ..followed by: "Checking..." ..and then returns to colored bootloader main screen.
edit:
I keep thinking whether it is normal or not that the white screen doesn't show any kind of confirmation that it did actually find any nbh file whether it is valid or not. Maybe it just exits when the nbh is not valid, that may be the case.
However I have now ran the routine a whole lot of times and make zero progress.
Maybe better continue the search for the correct ROM to flash with.
just try one of the official roms posted in the official roms thread. don't try 1.61 - only 1.43/48
I have tried all official roms posted including 1.43 and 1.48 and up without success. The bootloader wouldn't go further after having checked the SD card contents. It did not work at all.
Finally now I bricked (I hope temporarily) my HD2 by trying to install the latest official 2.02 from the RUU.
Strange things have happened here.
I had earlier copied an 148 or so nbh to sd card. Bootloader would't work out as explained in posts above. So after all (with card with 148 nbh still inside) I figured it was time to check what ROM 2.02 would do, since I believe it would overwrite all SPL including HSPL since it is a v2 SPL. At least I hoped.
When I opened the RUU, it did reboot the phone as it is supposed to do with RUU.
Few things happened:
a. The phone booted in bootloader and showed me the white step screen which indicated there was a nbh about to be flashed. This was the nbh on the card!
b. The RUU errored with error 260 that the connection was lost. I have never lost a connection, must be because file on sd card took control.
c. Since connection was lost and the phone wanted a flash from the sd card I pressed vol up to continue update. it did start updating... but at about 9% I got a big triangle /exclamation mark, and HD2 stopped updating.
Reboot. Guess what??? SPL 1.42.0000 in bootloader now. From the nbh on the card.
But NO boot, NO radio .... After all I managed to destroy phone and HSPL.
Had to goldcard my way back in. However, problem solved!

HD2 bricked ? Attempted to install UK WWE 1.66 onto Voda HD2 with HPSL

Help!
First time attempt at using HPSL and may have bricked my HD2 :-(
I have a Voda supplied HD2 so can't install the stock ROMs directly...I thought I would be able to do so via HPSL, but it seems not. I was trying to install 1.66 (UK WWE) following the HPSL for dummies guide, and did the following:
- installed HPSL onto HD2, confirmed by going into bootloader
- put nbh file (extracted from stock .exe) onto SD card, named LEOIMG.nbh
- entered bootloader and chose flash option via power button
- flash started (minimal progress)
- within 2mins error showed
- now going into bootloader shows
00028002
Not allow
then..
SPL-1.42.0000 :-(
Upgrade ROM code error Please try again
If I start normally I get a warning triangle.
How can I get my HD2 back from the dead, ideally with 1.66 rather than the crummy Voda 1.43? (can anyone point me at a stock ROM for the voda 1.43, perhaps that would at least unbrick it?)
Help!!!!
*EDIT* Currently downloading the Voda 1.43 image, hoping I can at least get that back and running...if that works will still be keen to find out how to apply stock 1.66 via HPSL (bearing in mind that the CID lock(?) means I can't apply 1.66 on my voda device thru normal means)
CraigBruce said:
(can anyone point me at a stock ROM for the voda 1.43, perhaps that would at least unbrick it?)Help!!!!
Click to expand...
Click to collapse
The 3rd sticky down in the HD2 ROM Development thread is titled, "[REF]Leo Official ROMs" - Click that.
Then click, "Shared folder for shipped Leo ROMs".
The first "box" will have the title "Leo 1.43" under it. Click the hand carrying the folder icon.
You'll be greeted with 3 ROM's, select RUU_Leo_Vodafone_UK_1.43.405.1_Radio_Signed_15.26. 50.07U_2.04.50.22_2_Ship.exe and download it.
Hope that helps.
Good luck with getting your phone back up and running.
Your device is not bricked. I think you have not installed HSPL properly.
Try installing HSPL again. As it seems your HSPL is not installed properly. Follow the following instructions very carefully :
Connect your phone to USB
I think when you boot in by default your device goes into bootloader if not press volume down + power butoon on the same time, your phone will enter tri color bootloader mode.
At the bottom of your screen it shoul show "USB"
Now download the HSPL.zip file(I have attached it here)
Now run HSPL.exe and follow the onscreen insteuctions.(Mostly you have nothing to do it will start installing automatically)
After a while on the screen of your phone a text will appear saying "We hacked it". If this text is displayed then everything went ok. Now confirm by clicking yes on the computer screen and it will finish the process.
All done.
Your phone will restart.
If you want to check that your fone has HSPL then press volume down+power key at the same time. The phone will enter into bootloader and should show "cotullaHSPL".
Now you can install any ROM and it will run properly.
Thanks - had just found that and started downloading as you posted this..fingers crossed! If this works will still be keen on ways to apply 1.66 (stock) to my voda CID locked device.
ankush1492 said:
Your device is not bricked. I think you have not installed HSPL properly.
<snip>
After a while on the screen of your phone a text will appear saying "We hacked it". If this text is displayed then everything went ok. Now confirm by clicking yes on the computer screen and it will finish the process.
All done.
Your phone will restart.
If you want to check that your fone has HSPL then press volume down+power key at the same time. The phone will enter into bootloader and should show "cotullaHSPL".
Click to expand...
Click to collapse
This is exactly what happened 1st time I installed HSPL...however trying it again did get the phone back and apparenty healthy again....thanks!
So - 2nd attempt to flash the 1.66 ROM, same as before. Confirmed HSPL installed via tri-colour bootloader screen, selected (via power button) option to flash from SD. Progress bar gets to (max) 10%, Warning triangle briefly shows then phone goes back to tricolour bootloader (but with std. SPL version) and nothing more happens.
Should I be waiting longer ? i.e. is the phone potentially still flashing when on the tricolour, std. SPL, screen ? Not flashed an HD2 before so not 100% sure I'm doing this right..will double check videos on this site, sure I'm just being stupid/impatient/not read enough....may try downloading the ROM again incase corrupted.
Anyway, HSPL installed for 3rd time and phone appears fine back running with 1.43.
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
CraigBruce said:
This is exactly what happened 1st time I installed HSPL...however trying it again did get the phone back and apparenty healthy again....thanks!
So - 2nd attempt to flash the 1.66 ROM, same as before. Confirmed HSPL installed via tri-colour bootloader screen, selected (via power button) option to flash from SD. Progress bar gets to (max) 10%, Warning triangle briefly shows then phone goes back to tricolour bootloader (but with std. SPL version) and nothing more happens.
Should I be waiting longer ? i.e. is the phone potentially still flashing when on the tricolour, std. SPL, screen ? Not flashed an HD2 before so not 100% sure I'm doing this right..will double check videos on this site, sure I'm just being stupid/impatient/not read enough....may try downloading the ROM again incase corrupted.
Anyway, HSPL installed for 3rd time and phone appears fine back running with 1.43.
Click to expand...
Click to collapse
Yeah, the 1.66 ROM you've downloaded may be corrupted. And next time, try installing the ROM with USB connection and the ROM's .exe file. You SPL is reverting back to stock, so it's possible that the culprit is flashing with SD.
OK, problem solved...
Rather than installing the stock ROM via HSPL bootloader I installed HSPL and then ran the RUU exe for the stock ROM. Phone now upgraded
dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
Thats not true, you can flash custom roms with hspl from an sd card
see my video *here*
dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
[★] said:
Thats not true, you can flash custom roms with hspl from an sd card
see my video *here*
Click to expand...
Click to collapse
I believe Dragon Soft was possibly referring to not using a stock ROM from SD? If I remember correctly flashing a Stock ROM from SD with HSPL on will remove HSPL.
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Custom ROM absolutely no probs with flashing from SD, the HSPL will stay intact, good work on the video ★
CraigBruce said:
OK, problem solved...
Rather than installing the stock ROM via HSPL bootloader I installed HSPL and then ran the RUU exe for the stock ROM. Phone now upgraded
Click to expand...
Click to collapse
Ok. I think you were trying to install official ROM. When you install an official rom your bootloader will revert back to SPL...
dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
thats not true. After HSPL you can intall directly from sd card..I have done it almost 100 times.
Ibb1982 said:
I believe Dragon Soft was possibly referring to not using a stock ROM from SD? If I remember correctly flashing a Stock ROM from SD with HSPL on will remove HSPL.
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Custom ROM absolutely no probs with flashing from SD, the HSPL will stay intact, good work on the video ★
Click to expand...
Click to collapse
Well if he does mean that then fair enough, I just thought that he meant custom when he said "that are not official" but whatever, sorry for the mis understanding
Ibb1982 said:
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Click to expand...
Click to collapse
I got my Leo two days ago, went home, put HSPL on it in the first place, wanted to upgrade the stock ROM, and ended up same as CraigBruce. Really frustrating, thought I'd bricked it. So I re-flashed HSPL and this time a custom ROM and it was back up again.
Now I know that I should have flashed the stock ROM via ActiveSync and not SD card which would have left the HSPL intact. I will definitely remember that for the future
just remember that some people WANT to remove HSPL when installing a stock ROM - e.g. when returning device.
tbh it should have worked with stock ROM and sdcard as leoimg.nbh - it is the way listed in HSPL thread to uninstall after all!!! we dont always want to use customRUU!!!
As from the noob flashing thread
NOTE: The only way to remove the HSPL is to flash an original SPL from microSD card
* You can also use this method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
VIDEO TUTORIAL: [★] has made a YouTube video to walk people through flashing a Stock SPL via activesync. Find it *HERE*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse
Guys, I had reached the exact same issue with the NOT ALLOW problem. And people, we do read some times (the newbies) and nowhere but here you say that AFTER HSPL YOU MUST NOT UGPRADE FROM MEMORY CARD!!!! And NO it is not included inhere: http://forum.xda-developers.com/showthread.php?t=609477
Cheers,
and thanks to all the smart people inhere!
D
thug_life_inc said:
Guys, I had reached the exact same issue with the NOT ALLOW problem. And people, we do read some times (the newbies) and nowhere but here you say that AFTER HSPL YOU MUST NOT UGPRADE FROM MEMORY CARD!!!! And NO it is not included inhere: http://forum.xda-developers.com/showthread.php?t=609477
Cheers,
and thanks to all the smart people inhere!
D
Click to expand...
Click to collapse
With hspl installed you CAN flash CUSTOM roms using sd card, it is only flashing OFFICIAL roms through sd card that removes hspl.
sorry to crash this thread but...
i have flashed HSPL on to my HD2 and am now wanting to install HTC's new 1.66 rom.
i have a VF hd2 so i am a little worried i will hit the same issues as the OP did.
can some one hold my hand through flashing the ROM as im a complete noob to this.. i have read the FAQs and im a bit like with all the acronyms etc
adam_r said:
sorry to crash this thread but...
i have flashed HSPL on to my HD2 and am now wanting to install HTC's new 1.66 rom.
i have a VF hd2 so i am a little worried i will hit the same issues as the OP did.
can some one hold my hand through flashing the ROM as im a complete noob to this.. i have read the FAQs and im a bit like with all the acronyms etc
Click to expand...
Click to collapse
Use the custom ruu to flash it. Do not put the nbh on the sd. I quote from the "[HSPL]How to flash everything" thread:
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Why people cant read? refering to the person who started this thread.
No Problem Flashhing to 1.66 on a Voda HD2 with HSPL
I have a voda HD2 and being a total Newbie to the HTC / WM .. I followed the Dummie guide.. (thanx to all, for that.. fantastic..) installed HSPL..and then installed the latest 1.66 from the HTC site using a boggus serial number.. As actual would not let me download it. No problemo..
Feeling a bit more adventureous.. any suggestions for the best 'cooked Rom' ??
From my understanding, you can flash away Stock ROMS using activesync. No need for HSPL.

$25 reward to fix my phone. Problems for over 45 days.

I won't bother with the exact history of things but I'll tell you what's on the phone and what I can't get to work.
SPL-2.00. 10000 XE
Radio 2.06.50.04
ROM Leo lite 2.6 WE (21892.5.0.89)
Current ROM works until I try to do anything involving phone radio and then it just locks up. My radio is not up to date for this ROM I assume.
Trying to flash anything at all via LEOIMG microsd card does nothing but sit at the Loading.... screen with never any progress. (I have also tried this with a goldcard that somebody made me and I get the same error.) Have used both a 16gb card and a 2gb card, all formatted to fat32
I am unable to flash a new ROM or new Radio or get the SPL to allow any OEM ROM/SPL package to install via SDcard.
Trying to flash anything with the standard flasher tool and it never did anything but time out. SSPL used to work but now it does nothing but time out. I'm stuck on this ROM, can't change it and phone doesn't work.
What I would like to do is get HSPL back on it, the most current radio and the latest US T-Mobile ROM
If you can help me do this I will pay $25 for the person to help me get it off my phone. There is a chance my goldcard could have been made incorrectly, I don't know anything about them. I can pay you via PayPal or mail you a check, whatever works for you. All I can do is give you my word that I will keep my end of the deal. I'm a 44 year old family man and a department manager of a casino. I would really appreciate any help.
If I posted this in the wrong place please move it but I'm at wits end and just want my phone back to normal.
Edit: Just to be clear, the $25 reward is for getting the SPL 2.0 off of my phone and/or getting me upgraded to the latest radio so I can run the most current TmoUSA ROM properly.
the problem appears to be that you have slightly different hardware to every one else.
didnt realise you were having issues with sspl, that at least should work ok. by time out do you mean there sspl boot screen appears burt nothing else?
if so what happens if you disconnect the usb cable and plug it back in?
if it changes to usb then rerun the sspl without changing anything on the hd2
you could also try - and uninstall the windows drivers for the qualcomm cdma drivers or whatever they are called on you pc. and reconnect in boot loader to let them reinstall.
SSPL used to work, it stopped working after I flashed a newer rom to play with. When I use the SSPL it goes into the bootloader screen just fine, then I hear the USB disconnect sound and the SSPL program times out quickly with the exit button citing no connection.
I have 2 x Windows 7 64 bit computers, 1 x Windows 7 32 bit and one XP 32 bit computer. I get the same results on any of them. All after the most recent ROM upgrade.
I have not tried running SSPL from boot loader screen, did not know that was possible. Trying that now. Just need to download a known working ROM.
If that works I'll be back in the same boat as before, stuck with 2.0 SPL and 2.06 radio. I want that SPL 2.0 off my phone badly.
OK, trying SSPL from the bootloader screen got me a little further towards ROM flashing. I can see the htc on the black screen with the progress bar. It now sits at 0% with no movement indefinitely.
Going to try another ROM and see if I can get the ROM installation to actually begin.
If you still haven't tried it do this: start SSPL when you hear the USB disconnect sound remove the USB cable (either from device or PC) and then connect it again! this should allow the SSPL to enter USB mode! I've had similar problems long ago and this trick was doing the job! Not sure that it will help you but just a thought!
Newb here:
I had something similar. I installed HSPL and everything was fine thereafter. The radio wouldn't flash any other way, in fact it would disconnect like you said, or if I manualy took the phone to boot loader, it would stick at 0%.
There is a HSPL thread stickied in the ROM section and I believe it explains how to remove it if you need to "re" validate your warranty. Although reading once more it does say you need SPL 1.42 to get it to install.
Have you tried installing an official HTC ROM downlaoded from their site? This will take you back to the original SPL version 1.42...
I don't have HSPL on my phone, I have SPL 2.0 Nothing is out currently to remove a later SPL with the exception of flashing an OEM full package ROM through the sd card but that doesn't work for me.
I have tried multiple roms now using SSPL from the bootloader screen and none will move the progress bar past 0%
Still stuck. : - (
Have you tried to hard spl it? If I missed it in your post, I apologize.
Not in a long while, I should try again I guess but I was totally under the impression that HSPL will error all the time unless you have SPL 1.42 installed on the phone.
Edit: Just tried and it errors because SPL 1.42 is not on the phone, it's the only SPL that HSPL works on as far as I know.
balane have you tried installing a stock rom from your SD card? this would revert the spl back to 1.42 and allow you to then flash HSPL (I think, almost certain) but you said you cant do anything with the sd card, have you tried that? have you tried with different SD cards? also have you made sure that it is formatted to FAT32?
Another thing you could try if all else fails: MTTY, look at the MTTY thread by MystikGenius, its stickied in the rom development section, this will format your phone from which you can then try to flash from usb or sd. I would recomend trying to flash from SD which then again may revert your spl.
Im going to school now so I wont be able to help you anymore 8 or so hours, but PM me later if your still stuck.
I may be wrong but from what I read in the threads I thought it was not possible to go back to anything under 2.0 once you flash a 2.0 SPL. You can't flash back to 1.48 or 1.66. You might be able to flash the new TMOUS which is in the 2.0 SPL range.
Yes, I've tried dozens of stock roms from the sdcard, every one I could find in fact and they all hang at the Loading... screen. As stated in the op, I used two different cards both formatted to fat32. I guess I could try a third card, not sure if it's worth a try or not.
I looked at MTTY but that doesn't do a thing with SPL and my SPL is the root of my issues.
Update: I finally did find a ROM I could get flashed via SSPL. It took like 3 tries to get the progress bar going but it did get installed. I can't even recall what series of events got it to go but at least my phone turns on and works.
Still the same SPL and radio though. No change there.
bobsbbq said:
I may be wrong but from what I read in the threads I thought it was not possible to go back to anything under 2.0 once you flash a 2.0 SPL. You can't flash back to 1.48 or 1.66. You might be able to flash the new TMOUS which is in the 2.0 SPL range.
Click to expand...
Click to collapse
I could have swore I read some people who were able to get the SPL 2.0 off their phones but I could be mistaken. I'm actually ok with any SPL as long as I can sspl different ROMs. I just want to get the radio current so I can run the latest TmoUS ROM, I would totally and 100% pleased with being able to update the radio. I have found now way to flash a more current radio.
balane said:
I won't bother with the exact history of things but I'll tell you what's on the phone and what I can't get to work.
SPL-2.00. 10000 XE
Radio 2.06.50.04
ROM Leo lite 2.6 WE (21892.5.0.89)
Current ROM works until I try to do anything involving phone radio and then it just locks up. My radio is not up to date for this ROM I assume.
Trying to flash anything at all via LEOIMG microsd card does nothing but sit at the Loading.... screen with never any progress. (I have also tried this with a goldcard that somebody made me and I get the same error.) Have used both a 16gb card and a 2gb card, all formatted to fat32
I am unable to flash a new ROM or new Radio or get the SPL to allow any OEM ROM/SPL package to install via SDcard.
Trying to flash anything with the standard flasher tool and it never did anything but time out. SSPL used to work but now it does nothing but time out. I'm stuck on this ROM, can't change it and phone doesn't work.
What I would like to do is get HSPL back on it, the most current radio and the latest US T-Mobile ROM
If you can help me do this I will pay $25 for the person to help me get it off my phone. There is a chance my goldcard could have been made incorrectly, I don't know anything about them. I can pay you via PayPal or mail you a check, whatever works for you. All I can do is give you my word that I will keep my end of the deal. I'm a 44 year old family man and a department manager of a casino. I would really appreciate any help.
If I posted this in the wrong place please move it but I'm at wits end and just want my phone back to normal.
Edit: Just to be clear, the $25 reward is for getting the SPL 2.0 off of my phone and/or getting me upgraded to the latest radio so I can run the most current TmoUSA ROM properly.
Click to expand...
Click to collapse
My English is not good. But I can help you. You can refer here ( in post 18&19) and use google to translate language :
http://www.pdaviet.net/showthread.p...KHI-UP-ROM-TMOUS-BẢN-TEST-(2-07)-BẰNG-THẺ-NHỚ
I have successfully repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card . And now can flash with any rom that is the base rom from 2:07 or higher (with SSPL)
Sorry for my bad English
balane said:
I don't have HSPL on my phone, I have SPL 2.0 Nothing is out currently to remove a later SPL with the exception of flashing an OEM full package ROM through the sd card but that doesn't work for me.
I have tried multiple roms now using SSPL from the bootloader screen and none will move the progress bar past 0%
Still stuck. : - (
Click to expand...
Click to collapse
No it won't be SSPL as we know it, the HTC stock ROM you can download from their site (Google "HTC HD2 DOWNLOAD") will use it's own method of getting onto your device and will reload SPL 1.42 for you. Although apparently you may not be able to do this with SPL 2. You say you have done it with a gold card, have you tried the stock rom downloaded from HTC via USB?
Otherwise, pester bepe for when the HSPL comes out that is compatible ywith SPL 2!
ancola66 said:
My English is not good. But I can help you. You can refer here ( in post 18&19) and use google to translate language :
http://www.pdaviet.net/showthread.p...KHI-UP-ROM-TMOUS-BẢN-TEST-(2-07)-BẰNG-THẺ-NHỚ
I have successfully repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card . And now can flash with any rom that is the base rom from 2:07 or higher (with SSPL)
Sorry for my bad English
Click to expand...
Click to collapse
Will not allow me to even read the forum because I'm not a member, can you copy paste the pertinent information here please?
You can use ANY goldcard???
mwillems2 said:
No it won't be SSPL as we know it, the HTC stock ROM you can download from their site (Google "HTC HD2 DOWNLOAD") will use it's own method of getting onto your device and will reload SPL 1.42 for you. Although apparently you may not be able to do this with SPL 2. You say you have done it with a gold card, have you tried the stock rom downloaded from HTC via USB?
Click to expand...
Click to collapse
I've tried multiple OEM HTC Roms and all give the same stuck at Loading... screen. Is there a specific HTC oem ROM you can recommend I try?
balane said:
Will not allow me to even read the forum because I'm not a member, can you copy paste the pertinent information here please?
You can use ANY goldcard???
Click to expand...
Click to collapse
YES ! You can use any Goldcard. I write instructions for you but my very bad English
balane said:
I've tried multiple OEM HTC Roms and all give the same stuck at Loading... screen. Is there a specific HTC oem ROM you can recommend I try?
Click to expand...
Click to collapse
When you say oem, do you mean just the nbh with which you have tried to install using tools or the self extracting exe that HTC provide? I'm just asking cos to me, oem means it comes without all the manufacturers extras.
I've always been under the impression that the only way to downgrade an SPL was to install a complete OEM package ROM/Splash/Radio/SPL as a LEOIMG.nbh from the root of the SD card. I've tried dozens of these both from US based ROMs and abroad. None of gone past the Loading.... screen. I've tried 1.42 and above ROMs, no luck with any.

How can I reset my phone back to stock & update it.

I tried a few cooked roms and I like some things about them and others I dont, so I was going to flash my phone back to stock and if there are any upgrades/updates I would like to do so also.... Please advise me, should I do this why or why not... and How can I go about doing this ? (Would I just use hspl2 1024 and reinstall 2.08 first, then install the latest stock rom ? -but where can I find the latest official stock rom?-can I get it from htc? )....
thanks in adavance...
If you have already run hspl2 there is no need to do it again. All you need to do is download the shipped rom (available here and at ppcgeeks.com) and flash it. There haven't been any updates for the stock rom as of yet. Your personal choice on if you want custom rom or stock. Custom roms usually have less bloatware and performance enhancements that make them ideal over the stock rom.
Link to stock rom: http://forum.xda-developers.com/showthread.php?t=653938&highlight=tmobile
looking for help
I installed hspl 2.08.0000 and flashed a custom rom, then I tried to flashed a vodafone Uk shipped Rom and now my Hd2 won't even boot up, when I connect it to the usb windows xp sees the device and tries to install a driver but then fails to find a driver. I cant even use mtty because usb is not listed as one of the selections. does anyone know how to help Please
Could be because you flashed a shipped rom that is for a different device. The european HD2 is different than the US HD2. If you have a US HD2 flash a rom that is designed for 1024 Leo (recommend Miri and Steve's Eleganicia). Put the phone in bootloader and then flash from pc or you can rename the .nbh from a rom to LEOIMG.nbh and place that in the root of your storage card to flash. Can get to bootloader by holding volume down and pressing the reset button under the back cover, holding vol key til tri-colored screen appears.
it wont let me get into bootloader mode, my computer does see the hd2 but wont let me access the usb
Maybe someone else can chime to correct me if im wrong but sounds like you now have one expensive paper weight. Flashing a rom that is not for your phone is not good.
Flashing a Euro Rom on your TmoUS HD2 will brick your phone - for good. Why are so many people doing this?
tmo are sure to get wise to this and stop replacing them at this rate. I've seen 6 or 7 people with the same problem in two days.
Guys with a tmous,
1 - DONT flash any stock roms except the one from tmous. Stock roms include a radio and it will kill your phone.
2 - DONT flash any radio with a .51. in the version. It will kill your phone.
3 - dont flash any cooked rom not based on the 2.10 rom. It will kill your phone. (i think, , , possibly recoverable, not sure yet)
4 - most of all read first, flash later.
OK PLEASE do not hijack the topic,
Remember I asked how can I reset my phone back to completely stock (like when I first bought it).... and then after that I would like to update it (if there are any updates)....
Thanks for all the advice so far...
erebusting said:
OK PLEASE do not hijack the topic,
Remember I asked how can I reset my phone back to completely stock (like when I first bought it).... and then after that I would like to update it (if there are any updates)....
Thanks for all the advice so far...
Click to expand...
Click to collapse
2 ways.
1 - connect phone via USB, run hspl1024, choose spl 2.08.0000, thats your spl back to stock. Then flash the tmous 2.1 rom over usb, thats your radio and rom returned to stock.
2 - you can get the tmous 2.1 rom, extract the file ruu_signed.nbh, copy it to sd card, rename it leoimg.nbh and reset your phone, which will see the nbh file and flash it, and because it is from sd card it will also reset the spl (and radio) to stock.
i'd go for option 1, as i haven't read much about people flashing sd card on the tmous, so for now steer clear.
samsamuel said:
2 ways.
1 - connect phone via USB, run hspl1024, choose spl 2.08.0000, thats your spl back to stock. Then flash the tmous 2.1 rom over usb, thats your radio and rom returned to stock.
2 - you can get the tmous 2.1 rom, extract the file ruu_signed.nbh, copy it to sd card, rename it leoimg.nbh and reset your phone, which will see the nbh file and flash it, and because it is from sd card it will also reset the spl (and radio) to stock.
i'd go for option 1, as i haven't read much about people flashing sd card on the tmous, so for now steer clear.
Click to expand...
Click to collapse
thank you... so will this unvoid my warranty?
erebusting said:
thank you... so will this unvoid my warranty?
Click to expand...
Click to collapse
it's the spl that voids the warranty, not the rom. when you boot to bootloader, so long as it says
spl 2.08.0000
then you are good to go.
Thank you!

Telstra Rom - not flashing

Folks,
HD2 from Telstra ( 2nd May ) running 1.66. Tried flashing it with 1.48 and 1.43 Rom's -- so I could then go to HSPL and a custom Rom, but no luck.
The Rom Update Utility starts and tells me I have image version 1.72.841.0, I click to update to 1.43.405.1 ( or 1.48 - have tried both ), then the 4 colour screen which notes 1.66. Then it goes to a HTC screen with a deployment bar, gets to only 1%.......then boom - error 294 invalid vendor id.......
What am I missing here ??
you need to flash thedowngrade from sd card, then you can hspl, and THEN flash from usb
At least your effort got that far.... i couldnt even see the zip open.
OS 5.2.21869
Manila 2.5.20121431.1
Rom 1.72.841.0
If someone can confirm what I need to do with what i'd REALLY appreciate it.
Have the backup rom just incase already.
you missed out all the important info.
what zip can't you open? what phone? what you trying to achieve?
assuming telstra like the op,
1 right click the telstra 1.4 rom .exe choose unzip here, or extract here
2 find ruu signed.nbh copy it to sd card rename it leoimg.nbh
3 phone off hold vol down, tap and release power, keep holding voldown till you see three coloured screen, should quickly change grey and start a card flash.
4 when complete and phone restarts hold vol down to re enter bootloader
5 run hspl as administrator using a usb port round the back of the pc,
6 when it completes, and phone reboots, enter bootloader yet again, and check that it says spl 1.42.hspl.
now, so long as you don't sd card flash hspl will stay and protect against bad flashes, flash what you like.
tmenyweather said:
Folks,
HD2 from Telstra ( 2nd May ) running 1.66. Tried flashing it with 1.48 and 1.43 Rom's -- so I could then go to HSPL and a custom Rom, but no luck.
The Rom Update Utility starts and tells me I have image version 1.72.841.0, I click to update to 1.43.405.1 ( or 1.48 - have tried both ), then the 4 colour screen which notes 1.66. Then it goes to a HTC screen with a deployment bar, gets to only 1%.......then boom - error 294 invalid vendor id.......
What am I missing here ??
Click to expand...
Click to collapse
What 1.48 and 1.43 roms did you try? They need to be Telstra roms, as you can't just use any 1.48 or 1.43 rom and this is what is causing the invalid vendor id error. Once you are back to 1.42.0000 spl (after flashing a telstra rom) you can then run hspl and are then free to flash what ever your heart desires.
I have a Telstra HD2 as well (1.66)...got it recently and will flash it soon.
I don't understand the original poster's concern - why go through all that to flash HSPL, when apparently HSPL2 can be easily flashed over 1.66...which allows you to further flash any ROM ??? Is there a benefit of HSPL over HSPL2 that I am missing?
Thanks in advance
edit: my bad, just read in the HSPL thread that HSPL2 does not work with the telstra hd2.
TyII said:
I have a Telstra HD2 as well (1.66)...got it recently and will flash it soon.
I don't understand the original poster's concern - why go through all that to flash HSPL, when apparently HSPL2 can be easily flashed over 1.66...which allows you to further flash any ROM ??? Is there a benefit of HSPL over HSPL2 that I am missing?
Thanks in advance
Click to expand...
Click to collapse
keep reading, you still have lots to learn, hspl2 doesn't work on telstra.
Oh, my spl is 1.66.0000
I understand I must use HSPL (not HSPL2) on a Telstra ph. but can anyone recommend which rom to use? I've been reading for two days solid and can't decide!
I've copied all the guides etc so hopefully won't have a prob'... am just worried about warranty protection etc if it all goes pear shaped... i just want all this B.S. bloatware OFF MY phone!!!
Thanx in advance once again
I am in the same position, my Telstra ROM is 1.72 running SPL 1.66.0000.
HSPL utility tells me that "Model ID is invalid" or something like that.
okay, one more time.....
only the original hspl works on telstra,
hspl2 does not work. (bad model ID)
you need to downgrade to a 1.4 rom with spl 1.42.0000.
so, get the original telstra 1.49.8xx rom from HERE (registration required)
when its downloaded, move it to its own folder somewhere, then right click the .exe file and choose extract here. (if that option isnt available, install winrar)
when it has extracted, find teh file RUU_Signed.nbh, copy it to your sd card and rename it leoimg.nbh
restart your phone in bootloader mode, it should detect the leoimg.nbh and start to flash
this will reset your spl to 1.42.0000 and now you can use HSPL, and then flash any rom you like.
Thanks for the link to HTCpedia mate. I'd actually just found it myself by performing a thread search on the "Official HTC ROM's" thread. Downloading now.
Stupidly I've had problems after problems trying to get HSPL on my device. I actually started out on this ROM (1.49.x with SPL 1.42.0000). First I tried flashing from my Vista x64 machine, both HSPL2 and HSPL with errors, in my haste I thought I might need update to the latest Telstra ROM 1.72.x with SPL 1.66.0000 so I could use HSPL2 when in actual fact I just had the x64 USB driver problem, of course then the upgrade still didn't allow me to flash and made my situation harder as I had to find this original ROM again to downgrade.
Anyways I hope this works!
It works!
- flash rom back to 1.49.x with SPL 1.42.0000
- run HSPL with device connected via USB
- flash radio using CustomRUU
- flash ROM using CustomRUU
@rainey06au what Radio do you use with your Telstra HD2?
Got my Telstra HD2 running 1.49 last week and it's my first play with Windows Mobile .. couldn't wait to clear the Telstra image from the phone as my provider is Three.
Did plenty of reading and all the posts said to use the original HSPL first, this worked perfect first go.
Once done I tried the new Artemis_v110 rom, was very impressed except experienced 2 to 3 random reboots a day, even more while in YouTube player. Everything else woked well, reception, battery life, and clarity while on calls.
Decided yesterday to try another rom, first cleared all using Task29 format, then loaded HyperROM Ultimate v9.00 WM6.5.X but this didn't get through the first boot .. possibly due to radio required.
Now have flashed back to 1.48.4052 until I research some more.
Anyone recommend a rom and suitable radio for the Telstra HD2, anyone with Three?
Thankx
Thanks. Works a treat!
I knew I had to downgrade but couldn't find an old Telstra ROM.
samsamuel said:
you missed out all the important info.
what zip can't you open? what phone? what you trying to achieve?
assuming telstra like the op,
1 right click the telstra 1.4 rom .exe choose unzip here, or extract here
2 find ruu signed.nbh copy it to sd card rename it leoimg.nbh
3 phone off hold vol down, tap and release power, keep holding voldown till you see three coloured screen, should quickly change grey and start a card flash.
4 when complete and phone restarts hold vol down to re enter bootloader
5 run hspl as administrator using a usb port round the back of the pc,
6 when it completes, and phone reboots, enter bootloader yet again, and check that it says spl 1.42.hspl.
now, so long as you don't sd card flash hspl will stay and protect against bad flashes, flash what you like.
Click to expand...
Click to collapse
I am also using Telstra HD2 and recently flashed it with Miri Rom. I like Miri because it doesn't have any customization. It has many versions to choose from, with and without Sense UI. It also retain all the original WM icons and themes which I like.
But like all ROMs, I do experience reboot but only once so far with the new version of Miri v17. One thing to note is the Radio version for the ROM. Make sure you flash the exact correct radio version, down to the sub version, e.g. 2.07.50 is recommended for Miri and not 2.07.51 (which is the Telstra radio version).
Another advise is always flash from pc, not SD card as I have experienced bad flash using SD card.
Hope this helps. Miri is only available from the HTCPedia site.
Yep my radio version is also 2.07.50. I get good battery life out of it using CleanEX_UDT HyperROM Ultra v9.00 (6.5).
I use Lia Glass ROM and FallOut Theme.
Interestingly this ROM and radio has only unlocked 455.54MB RAM, not the full 576MB. There are threads about this and getting the right combo will unlock the remaining RAM and/or improve battery performance.
I am using Radio 2.08.50.05.
Anyone else have the same experience?
ajt320 said:
I use Lia Glass ROM and FallOut Theme.
Interestingly this ROM and radio has only unlocked 455.54MB RAM, not the full 576MB. There are threads about this and getting the right combo will unlock the remaining RAM and/or improve battery performance.
I am using Radio 2.08.50.05.
Anyone else have the same experience?
Click to expand...
Click to collapse
look in settings about phone hardware info ram size.
I bet it says 576
that's cos the hardware takes 128 for graphics.
look st a standard rom and hardware will show 448 whilst total available will show 336
Thanks samsamuel.
Hardware info does in fact say 576MB RAM
Thanks for the explanation - slowly but surely getting my head around the intricacies of the device

Categories

Resources