Database Users

rom re boot steps

Hi XDA developer
I need help as my HTC HD2 MOBILE is not reboot I have tried the hard reboot and nothing happens.
two questions;
1. if i was to install a new verison of the rom Altermis v 26. which i have downloaded there is a another software called SSLD that I also need to download where is this. And how do i do this.
2. what happens if i cannot reboot the phone TOTALLY - in order to get to the operating screen where i can restore factory settings. I have also done a soft reset and still cannot getting into the phone.
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
HELP!!!!!!!!!!!!!!!!! PLEASE

keilah said:
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
Click to expand...
Click to collapse
did you flash a custom rom before this happened? If so, it is likely that you forgot to update to a compatible radi. Look through the thread for the rom you downloaded for details.

Hi
oK I under stand but if you was intsalling Altermis v26 on your phone.....there is a additional file where youy down load the software before transferring to your phone what is that software??????
please callled and where can i downlaod this

do you mean hspl? see my sig

yes
if that allows you to download "software" to the HTC HD2 device....and can you kindly please post the link here. and any steps i need to be aware off as i am new to this site.
Once again may thanks for all your feedback and assistance.....

the link is in my signature
"One HSPL3 to rule them all - all leo's supported, all spl inc tmous 2.10.0000"

Anyone know what is this 1EFATAL HIT1

I flash the phone with all the ROM's here and I have the same result. Rebooting continuously and after 10 times I got this screen (see Attached)
Anyone know what is wrong I try 3 different cards with different sizes and nothing I got the same every time. Is getting annoying because on the other phone everything go smooth.

testing MAGLDR v1.13

Wow, looks serious, i'm sorry i can't help though, but maybe you should post this on the magldr and wp7 thread. Also, did this happen to you on Android too?

Derek0228 said:
Wow, looks serious, i'm sorry i can't help though, but maybe you should post this on the magldr and wp7 thread. Also, did this happen to you on Android too?
Click to expand...
Click to collapse
Is doing this only with WP7 I will try MAGLDR v1.13 to see what could be.

Same thing with MAGLDR v1.13 I don't know maybe is the phone I even try with different Radios and still the same.

you installed wp7 then reinstall CWM, thats what happened. try flashing wp7 again.

Download New Wp7 package .... always run extratc the WP7 rar package ...and run exe ..

Next time post your questions in the correct forum please.

Still there are issues
I tried flashing hd2 with MAGLDR v 1.13 and android.
Still i see the same error

robinsonmenezes said:
I tried flashing hd2 with MAGLDR v 1.13 and android.
Still i see the same error
Click to expand...
Click to collapse
I'd run a task29 and start from scratch.

I could use a little help here
OKAY GUY'S I HAVE WINDOWS 7 COMPUTER I HAVE ZUNE AND WINDOWS TOOLS FOR MY PHONE BUT THE THING IS I WHEN I GO TO UPGRADE MY ROM WIN RAR STARTS LIKE IT'S ABOUT UPGRADE BUT IT JUST GO AWAY CAN SOMEONE PLEASE POINT ME IN THE WAY OF AN FIX TOWARD THIS.

bigboy38 said:
OKAY GUY'S I HAVE WINDOWS 7 COMPUTER I HAVE ZUNE AND WINDOWS TOOLS FOR MY PHONE BUT THE THING IS I WHEN I GO TO UPGRADE MY ROM WIN RAR STARTS LIKE IT'S ABOUT UPGRADE BUT IT JUST GO AWAY CAN SOMEONE PLEASE POINT ME IN THE WAY OF AN FIX TOWARD THIS.
Click to expand...
Click to collapse
I've read your post for three times now and still dont know what you are talking about.
could you please be more specific about your problem? and maybe withouth CAPSLOCK?
Oh and I think its the wrong thread,too?

georo said:
I flash the phone with all the ROM's here and I have the same result. Rebooting continuously and after 10 times I got this screen (see Attached)
Anyone know what is wrong I try 3 different cards with different sizes and nothing I got the same every time. Is getting annoying because on the other phone everything go smooth.
Click to expand...
Click to collapse
i can't be sure what the reason for this is,but you could always install the official nbh to remove magldr and hspl. then, try again from scratch. that's what i would do. also, the only spl magldr would work for me is 2.08. but then again, you have a tmous hd2..... from what i've seen the hd2 roms don't use the whole 1024 nand, but just half of it(like normal leos) anyway - i don't know if it has anything to do with your problem, but i suggest you start over from scratch, just to be sure....

Thank you guy for all the suggestions but I give up and I install WM6.5 and Android back. I tried all the possibilities and still same thing.
I am still thinking is something which WP7 don't like on this phone. Thank you for all your support.

okay sorry for the caps but i have new computer with widows 7 on it .now zune sees my phone when connect it but when i try to change the radio on it it doesnt find my phone iam i missing a driver are soething it start like its about upgrade my radio but then it just goes away without an error i use win rar file too change radios and rom but now it just dont work i hope i explained it a liittle better thanks for the help.

Have you tried different radios??

bigboy38 said:
okay sorry for the caps but i have new computer with widows 7 on it .now zune sees my phone when connect it but when i try to change the radio on it it doesnt find my phone iam i missing a driver are soething it start like its about upgrade my radio but then it just goes away without an error i use win rar file too change radios and rom but now it just dont work i hope i explained it a liittle better thanks for the help.
Click to expand...
Click to collapse
thats better, but still not perfect. you say, you changed your radios and roms already, but now it doesnt work anymore?
Try another USB-port.
And I hope you know, that to change radios, you dont need to enter the USB-Flasher-mode of magldr. to change the radiorom, you still need to enter the bootloader-mode by pressing the volume-down-button and power while phone is off.
Its as simple as that:
when executing a DAF.exe: use usb-flashermode of magldr.
when executing ROMUpdateUtility.exe: use bootloader.
and what do you mean by winrar-file?
you need to extract the radio first with winrar before you use it.

its win rar thats not working .
mideel said:
thats better, but still not perfect. you say, you changed your radios and roms already, but now it doesnt work anymore?
Try another USB-port.
And I hope you know, that to change radios, you dont need to enter the USB-Flasher-mode of magldr. to change the radiorom, you still need to enter the bootloader-mode by pressing the volume-down-button and power while phone is off.
Its as simple as that:
when executing a DAF.exe: use usb-flashermode of magldr.
when executing ROMUpdateUtility.exe: use bootloader.
and what do you mean by winrar-file?
you need to extract the radio first with winrar before you use it.
Click to expand...
Click to collapse
i start too extract the radio and it goes away is there a driver are something i missing i never had this problem

ERROR: ERROR: Cannot read ramdisk image

Hello guys,
Does anyone know what does this message mean:"ERROR: ERROR: Cannot read ramdisk image"?
It appeared on my HD2 while I was installing an Android ROM on it and now I cannot run any other OS on it but Windows Mobile. I tried Google but had no luck. Only one person as far as I understood experienced this problem but I have no reply from him and I am not even sure if he managed to solve the problem anyway.
So, if anyone knows something about it I would be happy to hear. Any help would be useful. Thanks in advance!
Best regards

zgeorgiev said:
Hello guys,
Does anyone know what does this message mean:"ERROR: ERROR: Cannot read ramdisk image"?
It appeared on my HD2 while I was installing an Android ROM on it and now I cannot run any other OS on it but Windows Mobile. I tried Google but had no luck. Only one person as far as I understood experienced this problem but I have no reply from him and I am not even sure if he managed to solve the problem anyway.
So, if anyone knows something about it I would be happy to hear. Any help would be useful. Thanks in advance!
Best regards
Click to expand...
Click to collapse
Did u flashed radio ?

I reflashed radio, did task29, flashed hspl, flashed Magldr, flashed stock WM ROM from my PC, then again from sd card and no result. WM ROM works ok but that's it. No Android or WP7 can be flashed. In order to be more specific, here is what I do:
1. HSPL 2.08
2. task29 with Radio 2.15
3. Magldr
4. CWM
And when I try to enter AD Recovery from the Magldr menu I receive the message I mentioned in my first post and there is nothing more to be done but using the phone with WM which in my opinion makes out of my HD2 a piece of crap.

zgeorgiev said:
I reflashed radio, did task29, flashed hspl, flashed Magldr, flashed stock WM ROM from my PC, then again from sd card and no result. WM ROM works ok but that's it. No Android or WP7 can be flashed. In order to be more specific, here is what I do:
1. HSPL 2.08
2. task29 with Radio 2.15
3. Magldr
4. CWM
And when I try to enter AD Recovery from the Magldr menu I receive the message I mentioned in my first post and there is nothing more to be done but using the phone with WM which in my opinion makes out of my HD2 a piece of crap.
Click to expand...
Click to collapse
Let mi simple u Task29 and Radio Rom
Task 29 - When u do task 29 to phone u delete everything even radio rom. So the thing u need to do is do this for magldr :
-Task29
-Radio Rom
-Magldr
-CWM
-Wipe
-Flash Rom
-Calibrate battery (some roms do it itself)
If it will make u easier i can make tutorial but im pretty much sure there is milions of them .
Try that way and report if it worked . Its 30min process.
EDIT: HD2 powered by WM is crippled yea. Android is far superiour even withou cam. But let me tell u one thing first thing why i tooked HD2 is Windows by stock and customization possible. Didnt carred about low battery etc. Windows is till now unbeatable bussines platform. iOs is near but its not it. Android hard to get bussines capable like windows 7. What I mean windows is bussines ready,iPhone is kinda ready and on android u have to customize like hell to get everything (at least what I as system admin need)

Task29 does not delete your radio. I was sure of it because I had flashed my phone a lot of times in the past, but anyway, I tried your method and the result was the same. When I install Magldr and then CWM, the phone does not let me enter the CWM menu so I cannot continue with the flashing of the Android ROM itself. It is just not possible without CWM. I also tried cLK method but when I press and hold the home key, the phone restarts and I get to a dead end once again. Thanks for your help anyway.
As far as WM is concerned, there is absolutely no chance for me to use this phone with this OS. if I cannot find a way to manage the problem I will just sell the phone and buy a native Android one which will make things much easier for me.
Best regards

Which rom are u trying to install?
Sent from my HTC HD2 using Tapatalk

It is all the same which one because when you are not able to enter the CWM menu you cannot install anything, but for instance, let's say this one: http://forum.xda-developers.com/showthread.php?t=1264828

I had problems booting that rom too. Try this one http://forum.xda-developers.com/showthread.php?t=1326217 almost perfect. Mwakious has some bugs i w8 for him to fix it

You don't follow what I say. I cannot enter CWM menu so I cannot even start flashing any ROM, it doesn't matter which one it is.
Merry Christmass by the way!

Which windows mobile u have/had ? Can u run android from sd ? Can u tell me exact procedure u tried to install nand android? If u want to try ffaster u can pm me to send u skype or gtalk.

Hi
I have the same issue, in bootloader on ad recovery.. i get cannot read ramdisk image, I will not uninstall ANDROID, because I will no longer support android, if I can not install any other roms
Any other advice, but to not lose my actual ROM!!!!
PS: I had installed ROM Manager latest, and installed clockwork from rom manager, Till then the recovery worked....

Had the same problem yesterday. I used the HD2 Toolkit to repartition, by the way it installs Recovery 5.
Then everything worked fine.
Sent from my NexusHD2 using XDA Premium App

Reaper1337 said:
Had the same problem yesterday. I used the HD2 Toolkit to repartition, by the way it installs Recovery 5.
Then everything worked fine.
Sent from my NexusHD2 using XDA Premium App
Click to expand...
Click to collapse
And do I lose my actual ANDROID ROM?
And How to use that toolkit?
THANK YOU IN ADVANCE!
EDIT:
I managed to fix my problem by HD2 Toolkit 4.2.0.1 with Maglrd update recovery.
THANK YOU!!!

rilley said:
I managed to fix my problem by HD2 Toolkit 4.2.0.1 with Maglrd update recovery.
Click to expand...
Click to collapse
Could you please explain me step by step how exactly you managed to solve the problem. I installed HD2 Toolkit 4.2.0.1 and try to use Update recovery function but the console that opens after I start the process freezes and I cannot continue. There is an explanation in it saying that probably the USB connectin is not good. However I use the USB flasher in Magldr menu for this connection between the phone and the PC and I don't know another way to connect both devices for the installation process. Is there something that I am missing?
By the way The message that I receive now when I try to open CWM changed from "...cannot read ramdisk image" to "...cannot read kernel image". Does it make any difference?
Thanks in advance!

@By the way The message that I receive now when I try to open CWM changed from "...cannot read ramdisk image" to "...cannot read kernel image". Does it make any difference?
For this question I do not know any answer, but for USB Connection I know because I had the same problem:
Put your phone in debugging mode.. and connect it to PC..
Use usbdeview to delete any android drivers from that list..
Then in device manager find any new hardware, and right click, and update: Browse my driver manually> Let me pick my driver> find the driver from http://forum.xda-developers.com/showthread.php?t=1090783 find "Download Drivers By T-Macgnolia", and after that you need to find Android Driver installed in device manager, after that hd2 toolkit will work.

Solution
You have to copy the files in the. Zip attachment inside the SD.
Make the whole process as usual, but instead choose the option you choose AD Recovery Boot option AD DS.
This way you can access the recovery menu and load the rom.
regards

Thx a lot!!!
This worked for me- just perfect!!!
Mikel

Worked for me as well, thanks very much, I was about to see how far the phone could fly.

Thanks
Hi, and many thanks.
I fixed my error like a charm.

Had the same problem
Thank you, this realy helped me out!

SPL?

I'm trying to fix a co-workers' HTC HD2. It *had* WM 6.5 but she somehow installed SPL 3.03 (?) and I have been unable to make ANY progress with flashing a ROM onto her phone. Any help would be greatly appreciated...
Note: I'm only familiar with working on my Captivate, the XDA community has been good to me in the past, hoping some of you can spare a few minutes to help me help out my co-worker.

Download HSPL4, boot into bootloader (tricolor) and flash HSPL 2.08.
BTW: Wrong forum!

SynGamer said:
I'm trying to fix a co-workers' HTC HD2. It *had* WM 6.5 but she somehow installed SPL 3.03 (?) and I have been unable to make ANY progress with flashing a ROM onto her phone. Any help would be greatly appreciated...
Note: I'm only familiar with working on my Captivate, the XDA community has been good to me in the past, hoping some of you can spare a few minutes to help me help out my co-worker.
Click to expand...
Click to collapse
Have you read my flashing tutorials for the HD2?
Mark.

mskip said:
Have you read my flashing tutorials for the HD2?
Mark.
Click to expand...
Click to collapse
Lol, I was genuinely about to post this guide by you to tell him what to do

Nigeldg said:
Lol, I was genuinely about to post this guide by you to tell him what to do
Click to expand...
Click to collapse
@syngamer if its Android that you want to put on the phone then read the requirements in the above thread before you start. As you have SPL 3.0.3 on the phone you will want to follow *THIS* guide to install HardSPL and select HSPL 2.0.8 from the list or Magldr wont run properly. Also boot into the bootloader and make sure you have a new radio as that can cause problems too.
MArk.

Thanks guys, but no matter which guide/tutorial I try I keep running into the ERROR [262] : UPDATE ERROR

you should give more detail, especially things like the full filename of the file you are using that gives the error, and details of what you are doing to perform the flash, and details of what you think you mean by ''It *had* WM 6.5 but she somehow installed SPL 3.03 '' since thats a normal spl?
ALso, is it a normal hd2, or is it a tmous hd2? (tmous is t mobile US and has green send key red end key, and its very important to know which it is)

samsamuel said:
you should give more detail, especially things like the full filename of the file you are using that gives the error, and details of what you are doing to perform the flash, and details of what you think you mean by ''It *had* WM 6.5 but she somehow installed SPL 3.03 '' since thats a normal spl?
ALso, is it a normal hd2, or is it a tmous hd2? (tmous is t mobile US and has green send key red end key, and its very important to know which it is)
Click to expand...
Click to collapse
It's a T-mobile HD2. She started trying to flash Android on it and got cLK 1.14 but couldn't progress from there.

well i cant really help with the next steps, cos ive never used cLK, its a bit too advanced for me, give me teh simplicity of magldr any day.
You didnt explain the errors tho, , i mean, if you have cLK installed, you should be using fastboot to flash cwm next i think, whereas teh error you describe sounds like you are trying to flash with teh phone in bootloader(stripey screen)?

samsamuel said:
well i cant really help with the next steps, cos ive never used cLK, its a bit too advanced for me, give me teh simplicity of magldr any day.
You didnt explain the errors tho, , i mean, if you have cLK installed, you should be using fastboot to flash cwm next i think, whereas teh error you describe sounds like you are trying to flash with teh phone in bootloader(stripey screen)?
Click to expand...
Click to collapse
Well, I've got Magldr installed, CWM is now on there and from there I'm set. Currently flashing (trying to at least) NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).
EDIT: holy ****, that was fast. I currently see an HTC logo...wondering if first boot takes awhile like most...and disregard. It's now loading. Success! Thanks for the links/guides everyone! This is why XDA is the best.

Congrats on your restoration f the HD2!
BTW she can dual Boot the HD2 if she likes

SynGamer said:
Well, I've got Magldr installed, CWM is now on there and from there I'm set. Currently flashing (trying to at least) NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).
EDIT: holy ****, that was fast. I currently see an HTC logo...wondering if first boot takes awhile like most...and disregard. It's now loading. Success! Thanks for the links/guides everyone! This is why XDA is the best.
Click to expand...
Click to collapse
Haha, that was exactly my reaction on first boot Glad to see you got it sorted out

[Q] need help:Move from Gingerbread 2.3.5 SD to MIUI

Hi,
I have Gingerbread 2.3.5 (Nexus) as the only Operation System on my HD2. It crashes when I use some application e.g. Scan my SD card for medias, using a music player. Now I want to switch to a better ROM like MIUI (that's what I've heard). How can I do that?
Please consider that:
- I'm beginner
- I have only Android (No Windows)
- I have HSLP v 3.* (A version of MIUI which I downloaded and tried to install, only support HSPL v 2.* or bellow)
I will appreciate any kinds of help.
Thanks,
Mas

what loader do you have?
anyways check out the link below & give them a good read, it might help

mengfei said:
what loader do you have?
anyways check out the link below & give them a good read, it might help
Click to expand...
Click to collapse
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"

sallaneh said:
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"
Click to expand...
Click to collapse
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?

Marvlesz said:
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?
Click to expand...
Click to collapse
Well! I asked (and paid) someone to install it for me
I'm thinking about re-installing a Windows and then install an android on my SD card if I don't have any other options.

You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.

Nigeldg said:
You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.
Click to expand...
Click to collapse
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5

sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
Doesn't mean that it's an HD2.

sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
you can get one here as low as $100 New
http://s.taobao.com/search?q=HTC+HD...rceId=tb.index&spm=1.1000386.5803581.d4908513

haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.

sallaneh said:
haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.
Click to expand...
Click to collapse
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.

adil1508 said:
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.
Click to expand...
Click to collapse
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards

sallaneh said:
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards
Click to expand...
Click to collapse
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.

adil1508 said:
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.
Click to expand...
Click to collapse
tnx.
I will try task29 and lets see what will happen.
As you can see in the title, I have a NAND Gingerbread 2.3.5 (Nexus) and I'm not very happy with it so I want to recover my winmo 6.5 and then install another rom of Androdi on my SD. Am I in the right path?
- task29
- put the stock rom on my SD
- reboot and install the winmo 6.5
regards,
Masood

its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use

adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards

sallaneh said:
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards
Click to expand...
Click to collapse
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually

adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
adil1508 said:
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually
Click to expand...
Click to collapse
I will check these parameters as soon as I get home!

sallaneh said:
I will check these parameters as soon as I get home!
Click to expand...
Click to collapse
Good,
Btw, here is the rom link. Download it. Its neccassay regardless of what answers you provide
http://forum.xda-developers.com/showthread.php?t=933951