Hello! My HD2 appears on the computer just fine but when I attempt to connect it to Zune its not possible as a error occurs.
"Connection error, Can't connect to your phone, Disconnect it, restart it, then try connecting again"
I've tried multiple reboots but the problem persists and I've tried installing and reinstalling Zune. Is there another way to sync music or does it have to be through Zune?
Thanks in advance!
Bump, I've tried searching and the solutions that I've found don't work :S The device comes up as unrecognized on my computer even the tri color screen does.
Related
Hey guys 'n gals
I'm having a prob synchronising my Hermes, either through a usb cable or over bluetooth.
It connects fine, I can explore device and all, but never goes over the "looking for changes" - it just returns a very clear (!) "Synchronization error". No other error code...
The ActiveSync I'm using is 4.1, by the way, and have tried to re-install the driver to no avail.
How do I fix this? It was working a couple of weeks ago, and now no go! Looking back the only thing I did to it was to get it CID unlocked (as described in the wiki), but I think it had stopped working then too....
Can anyone help? Thanks!
Hi
I just tried installing WM6 on my Vario and half way through the upgrade a blue screen appeared on my pc, with the machine rebooting. It now does not detect the Mobile phone, with only the splash screen of HTC appearing on the phone
What do I do? Please I need your help
Thanks
it happened to me as well. So what I did was I use my laptop. So if you have 2 computers, then you should swtich to the different one. or else, you can just hard reset the phone and then try to attach the usb again and see if it fix the problem
When I do hard reset nothing happens accept for the htc logo appearing. The computer doesn't recognise the usb on the device
There must be a way to upload a ROM to the pda to get it up and running
Any ideas?
Hi,
I read the instruction about flashing USPL and unfortunately it didnt work for me.
After my screen becomes blank during the update proces (as predicted) and the PDA phone update utility appears I loose activesync connection for good.
During the update I actually have a connection and proces goes well when being showed the Ms dos prompt.
Then the PDA phone update utility screen appears and the horror starts.
My p3300 spontaneously looses USB connection.
Now no device can be found on my PC to complete the proces.
What do I do now? Can it be salvaged?
EDIT: solved this was a driver issue. Ie XP did not recognise my device anymore in bootmode. Switched to another usb port and searched with windows for new devices. After XP found my device again on the new port I finished the installation.
Hi,
I'd like to flash my HTC Touch HD, but everytime i run HSPLWrapper_Blackstone_156OliNex, the process sits on 0% and i get 262 UPDATE ERROR.
I searched the forums, tried soft and hard reset, reinstalling ActiveSync, differrent cables, usb ports. I tried to use official HTC ROM, to find out if the problem is in the connection, but it worked on the first try.
I would really appreciate any idea how to fix this.
Thanks
Have you tried USPL?
have you tried putting the phone in bootloader manually? to do that, hold down power and volume down at thesame time. then connect the usb cable.
Thank you for fast response.
@lohpsch:
No, I haven't. I'll try it now.
@accountabc:
I have already tried it. It behaved the same - stucked at 0% and 262 error
edit:
USPL worked.
Thank you!
how abaut if phone only logo
i have that problem
Have you tried upgrading your Blackstone on a different PC that runs Windows XP?
i think you must run SSPL-manual-touchHD.exe on your device to get three color mode before you flashing it
Hi mates! Help me please if you know the answer. The point of my trouble is that i have DFT freedom rom v1 on my omnia7 and I cant`t connect to zune. When I plug my phone into pc via usb cable zune states that thereis connection error and the phone should be restarted. Please tell me how can i solve this trouble, or may be thereis another way to get syncronization work. Thank you.