Hi,
I'd like to flash my HTC Touch HD, but everytime i run HSPLWrapper_Blackstone_156OliNex, the process sits on 0% and i get 262 UPDATE ERROR.
I searched the forums, tried soft and hard reset, reinstalling ActiveSync, differrent cables, usb ports. I tried to use official HTC ROM, to find out if the problem is in the connection, but it worked on the first try.
I would really appreciate any idea how to fix this.
Thanks
Have you tried USPL?
have you tried putting the phone in bootloader manually? to do that, hold down power and volume down at thesame time. then connect the usb cable.
Thank you for fast response.
@lohpsch:
No, I haven't. I'll try it now.
@accountabc:
I have already tried it. It behaved the same - stucked at 0% and 262 error
edit:
USPL worked.
Thank you!
how abaut if phone only logo
i have that problem
Have you tried upgrading your Blackstone on a different PC that runs Windows XP?
i think you must run SSPL-manual-touchHD.exe on your device to get three color mode before you flashing it
Related
So got my Dopod 838pro running windows mobile 5 and will upgrade it to windows mobile6 with any luck, at the moment im trying to upgrade the boot loader to SPL (Bootloader) version 2.10.Olipro (HardSPL v7) and im following this very handy guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
however i get to the very end where its supposed to flash the new boot loader and it sits there for a while until the updater utility comes back with ERROR [260] Update Error.
Which informs me that i should check to see if the phone is connected to the computer via usb, which it is.
It must connect to the phone cause it actually starts the process of trying to update the boot loader, i see it on my phone. It goes to a red, green and blue screen. Which says:
Herm1000
IPL-SSPL by Des
Herm100
SPL-1.09.ds
USB
The only option i have here is to press exit on the updater utility, and start again.
Nothing else happends after this.
Im running Windows Vista 64bit, have also tryed this guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Still no solution.
Currently i have:
IPL 1.01
SPL 1.06
Have also restarted my computer in between trying different things.
Anyone ever had this problem or know a fix?
Thanks in advance.
error 260 is an open port error. try a different usb port, disable antivirus and firewalls, or if avaiable try on a different pc, xp if possible.
heh, works on my XP machine.... >< Thanks.
Edit:
I tried a differeny USB port on my vista machine and that didnt work. I also closed absolutely everything and that didnt work either.
Hi, I have this strange thing: with no reason, the startup menu, became a black square which freeze the system, no respond at all. Rebooting is working fine except when pressing the windows symbol for the startup menu. My problem is that if I try to upgrade to 4.02, or even the official rom from xda my orbit gets disconnected with no reason. " disconected ,check the cable and try again" is the message. I have tried on Vista, on XP, I have tried several roms but...the same thing, at the stage when i get the upgrade progress bar on the computer I get disconnected. Any Ideea why?
I am running the version 4.1 with cube, no problems until yesterday.
Thanks alot for your ideeas.
Did you remove your sd card?
IT WORKED!!!!
Thanks a lot, it was as simple as that, I have managed to load the O2 original Rom, from now it's all simple.Thank you for the idea!
ok, i got a att 8525 with herm100 ipl-1.03 & spl-1.11, currently its not booting up because of a failed attempt at installing crc r13.3, i can get it to the tri-color screen, but i can't get it to connect to activesync, it is getting recognized by the other ruu rom flashers but after it goes to 1%, the phone reboots, and i can't get past that even with tryin to flash a factory rom.
there anyway to unbrick my phone?! i've tried a couple of the ways i've found from searching but none seem to work, my pc is running vista but i also have xp on vmware if needed.
well i finally got the factory rom flashed, and now its working again!, i don't know how it happened, it just......happened.
Gone through the various help threads on rebooting, resetting etc.. Battery is charged, m/card and sim have been removed..
Phone is at the boot loader stage - reads Upgrade ROM code error - have the USB plugged in and can see the USB writing on the white part of the red,green,blue,white screen but pc refuses to make a connection.. keeps saying activsync not connected or busy..
Have tried rebooting the phone and also the pc, changed cables, changed USB port.. no joy..
Any suggestions appreciated..
not sure what you want...but you have certainly described the situation really well.
i understand that your device is in the bootloader (thats the multi-color screen). i understand that "USB" is written at the bottom of the bootloader screen. i understand that you have removed all the cards.
what i don't understand is what you want help with? why are you trying to establish an activesync connection? activesync will obviously NOT connect if you are in the bootloader because the bootloader isn't the same as windows. windows mobile must be running if you want a full activesync connection.
so what exactly are you looking for? do you want to flash a ROM or radio ROM or some such? are you simply trying to "hard reset" your device? details please!
yea, dont be confused by posts that say 'when connected to active sync, blahblahblah', they dont really mean activesync the program, they simply mean a usb connection. The fact that it says USB on the white part means you can now run your rom flash,.
ok.. what I am trying to do is re-flash the ROM.. I had a flashed ROM on there and I was just going to upgrade it to the latest one (Laurentius26 GoldEdition V3.4 Stock/Spike™ WWE 23568) and about 20% of the way through it froze and then I get a recovery screen come up.. followed the instructions and started to flash again and the same thing happened.
In both cases it seems as if the USB connection was dropped even though there was nothing else happing on the pc at the time.. now when I try to re-flash, no US connection is being established.
Well I left everything disconnected last night and tried again this morning. We have got a connection now but the re-flash has failed again so I shall just go back to the old ROM.. thanks for you all's input.
probably a bad ROM download. I would try to download again and if that doesn't fix it, let the ROM cooker know that he probably has a bad upload of the ROM.
I've been trying to install ACA CLk update to my HD2 since last night. Task29 will not clear rom. Just reads communication error. I have tried it on 2 win7 pc's along with a win xp pc with same results. Please help.
i am having the same error.
whether i run the ROM update utility or use the HD2 tools from the tri-color boot screen, i always get the same UPDATE ERROR (262, i believe).
i'm using USB2, no cradle or dock, brand new HD2.
any help? i'm stuck in a windows environment!
just to be sure : the communication is ok between the computer and ur phone ? u see USB in bootloader?
yes it is between my windows based pc and my HD2. and i have tried through boot loader, seeing seriel first then connecting and then it says USB. i've tried leaving it attached when i restart sit goes straight to USB. i have tried connecting with activesync/windows mobile and then running the ROMupdateutility.exe
i always get the same error: it stalls out right when the progress bar appears and never gets above 0%. then the error screen shows on my PC and i have to go through the recovery process.
thank you for any and all assistance! and sorry for the typos, im normally use swype.
this might have been the problem.
i did not have HardSPL3 installed.
i have done it, and then MAGLDR installed fine.
i skipped Task29 mostly bc i never ran that on earlier installs.
so try HardSPL to solve it, maybe?
(i'm still pretty new to this, so take my suggestions with a few grains of salt)