hi guys, new on this forum, today i tried to install an ICS rom on sd using new ultimate port-a-droid, but stuck at bootscreen.
I have miui on nand.
the rom I used is iceCreamTosti, last version...unpack the rom and port-a-droid zip on "ics" folder, than boot from sd...
think this post could be useful
Hi throcker,
I didn't use port-a-droid but it seems to need wm in NAND not miui android.
If you want to taste ICS on SD try Tytung's ICS-4.0.3-CM9-SD V1.2
http://forum.xda-developers.com/showthread.php?t=1437463
As far as I know Xylograph have only NAND ICS lite version.
yeah, ok, I tried that but there are too many bugs...
anyway, boonbing said that booting on magldr you can't edit the startup.txt file, not that it doesn't work...so, I'm just asking if someone is running fine from magldr
Related
hi there
i gave a problem with magdlr
i can not boot from android on sd?
its reboots before it boots up, or it will boot to the NAND rom?
when i choose AD SD..?
any help apriciated
Take a look at the thread for the SD card build you are trying to use to see if there are any special instructions to be able to use it with MAGLDR. I know some of the SD card builds require a different roof.img to be able to boot using MAGLDR. Also look for a readme file in the ROM that might have the needed information you are looking for. For example this quote comes from the American Android SD card build thread.
Includes optional rootfs.img that allows to boot build from magldr (!readme! in /sdcard/Android/SDMAGLDR)
Click to expand...
Click to collapse
Here is a link to the thread.
in mgldr menu go to 'services' then 'boot settings' then 'ad sd dir' then choose the directory of your sd android (which is bootable by mgldr as indicated in the previous post) after that you'll be automatically directed to the mgldr main menu. then choose 'boot ad sd' . booting takes longer than nand roms.
i have all that done
i am not noobish or what. but i dont understand this,
ive flashed wm back. and the sd build would boot up.
then back to magdlr. and the same thing again.. first time its rebooting.. second time it boots the nand rom.?
ive have some apps from my sd build in my nand rom? that is stranger than that all!
rooft img is replaced btw..
if i understand right, when you reboot you want your phone start by the sd build. in sd build thread look at 3 dak's MIUI rom's first post, there is an instruction for that. the second thing, i think is related to sd-ext partition, both sd and nand roms are using it so apps pass from one to the other.
ahh ok
ill try with a SD without an EXT partition..
lets see what happens then
i had putting an sd build @ a nokia 2 gb micro sd.. no ext partition
and i see the NAND bootscreen again ...
what could it be?
roofs.img is replaced, magdlr is correct configured,
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
mutil said:
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
Click to expand...
Click to collapse
yeck.. again...
ok i'll try..
i let it know if it works or not
blowtje90 said:
yeck.. again...
ok i'll try..
i let it know if it works or not
Click to expand...
Click to collapse
If you want your SD card build to be the default Android you boot with MAGLDR, then from the main menu of MAGLDR go to option #10 Services/0ption #1 Boot Settings/option #1 Boot Source/ option #1 Android from SD. This will tell MAGLDR to boot the SD card build by default.
Sorry I can not be of any more help booting SD Android builds with MAGLDR. I have never done it before so I really have not researched it.
the problem stays....
very strange... i have eerlier running perfectly 2 builds of android on my hd2 ..
If the kernel from sd build is nand kernel like tytung r10 then when you choose ad sd from magldr it will boot into nand build.if you have wm or wp7 into nand,there is no problem
Sent from my Nexus One using Tapatalk
ahh that is the issue.. thnx mate
the SD build i use uses a tytung r10 kernel
now i must search to a another compatible kernel, anyone some suggestions?
hi i have big problems with my hd2.i had installed the hyperdroid 2.1.0 and at first everythink works fine.but a month ago my phone crashes sometimes when i use googlemaps and other thinks.it freeze.now i installed the newest version and it works more badly.sometimes the phone does not start and it freeze before magldr shows the gogogo.
what i have done:
i've done an backup and installed the new version via sd card.so long it works i can start android.i was happy and try to load some apps then it crashed.
i have the newest magldr and the right 150 mb version for hyperdroid.
i hope someone can help me and sry i have not enough posts to post it in the hyperdroid post.
Greetz DmX
ps:sry for my english
latest version on sd ? .....try it on NAND
I dont know much about hd2 ...but try to reset everything ...latest hyperdroid on NAND ....and nothing on the sd
dmx489371 said:
hi i have big problems with my hd2.i had installed the hyperdroid 2.1.0 and at first everythink works fine.but a month ago my phone crashes sometimes when i use googlemaps and other thinks.it freeze.now i installed the newest version and it works more badly.sometimes the phone does not start and it freeze before magldr shows the gogogo.
what i have done:
i've done an backup and installed the new version via sd card.so long it works i can start android.i was happy and try to load some apps then it crashed.
i have the newest magldr and the right 150 mb version for hyperdroid.
i hope someone can help me and sry i have not enough posts to post it in the hyperdroid post.
Greetz DmX
ps:sry for my english
Click to expand...
Click to collapse
Try doing a task 29, then re installing magldr and cwm. From cwm wipe data/cache/dalvik cache, then install hyperdroid 5.3.0
Ahmed93 said:
latest version on sd ? .....try it on NAND
I dont know much about hd2 ...but try to reset everything ...latest hyperdroid on NAND ....and nothing on the sd
Click to expand...
Click to collapse
It is on NAND, he meant that he installed the rom from sd card
o i c
Hi, with no success installing Hyperdroid I decided to install this ROM:
MDJs_CyanogenMod7_v2.6_NAND_A2SD+CWM.zip
Installed:
Radio - 2.15.50.14
HARDSPL - 2.08
Magldr - v1.11
CWM Rec - v3.0.0.5
I took Hyperdroid off by doing a task 29 and re-installing everything again along with the new ROM (above).
On restarting the device, the blue Android comes up but the phone doesn't go any further. I've left it for up to half hour and still nothing. Tried resetting several times and still the same thing.
What am I doing wrong ??
Also, is there a way to easily remove a previous ROM without having to taks 29?
Thanks
I don't know about MDJ's ROM's , but they are pretty much old.
I assume your problems are being derived from not using the proper partition size.
Installing CWM is not enough, you need the proper partition as well.
As far as I know MDJ never made and CWM builds; I recommend going with Typhoon CM7 NAND... way better than MDJ - and there is no issues as with MDJ not willing to provide the source of his ROM (in other words - it may do whatever and however and be unsafe from the financial perspective - you never can find out).
Thanks guys, I'll try Typhoon CM7 NAND.
Is the HTC HD2 supported as I've been on the CyanogenMod weblog and it isn't listed?
If not which can I use.
gurdevb said:
Thanks guys, I'll try Typhoon CM7 NAND.
Is the HTC HD2 supported as I've been on the CyanogenMod weblog and it isn't listed?
If not which can I use.
Click to expand...
Click to collapse
...Is that a serious question?
Typhoon CM7 NAND is CM7 and think about your question... is the HD2 an Android device in the first place? No.
HA HA so it is!
How can I get past the bootup screen - it is frozen on the htc logo in green.
I've tried flashing it again and nothing.
What is the recommended partition for this as this is the only thing I can think that I'm doing wrong?
go here http://forum.xda-developers.com/showthread.php?t=898913 download the 150mb partition if you're going to be using typhoon cm7 ( which is a fast, stable rom) and flash rom as usual in recovery. If you experiment with a bunch of different roms i would suggest downloading the HD2 Toolkit
You can also try Dorimanx Rom, which is also based on CM7.
try new rom like hyperdroid or typhoon, they good
I have successfully installed TyphooN_CM7_v2.9.2-cLK about 8 motnhs ago & been using it but fancied a change.
I am lucky enough to have two HD2's so decide to try installing another nand on the other phone.
I tried TyphooN_CM7_v3.7.0-cLK & DFT_LEO_NAND_Android both using Task 29 & using CWM with CM7 & the USB flasher (as per instructions on the page) for the DFT one. No luck with either they both install but I get an error "Process system is not repsonding" which won't go away with the DFT one & its just keeps booting into Magldr with the CM7. I have installed NexusHD2-Gingerbread_V2.9_NAND_(Android-2.3.5) which is working & installed fine but just can't get either of the other two to work.
I wanted the CM7 to upgrade the current Typhoon I have a wanted a Desire nand on the other phone as a change.
Any ideas what I'm doing wrong?
Help much appreciated
Thanks
Edit:
Following this thread for the CM7 http://forum.xda-developers.com/showthread.php?t=933951
& this for the Desire nand http://forum.xda-developers.com/showthread.php?t=893620
Till now you are used nand android ... so you have the important things (HSPL2.08, radio 2.15.50.14, MAGLDR).
And you installed NexusHD2-Gingerbread ... this means that everything is OK.
I think you can try to download the other things for CM 3.7.0 again.
I've had problems with installing when the .zip is corrupted or something ...
With the typhoon version I would check to make sure that you downloaded the magldr version and not the clk version as it is the magldr that you keep booting into. If you try installing clk to a magldr loader it will not load and just go into magldr loader. With dft one it is probably a bad download or perhaps it is that the rom is an older rom.
There is a lot solutions/problems. Which rom u try to install? Magdlr or clk?
Sent from my HTC HD2 using Tapatalk
Same here
I have exactly the same problem, the only zip NANDs i can install are NexusHD2-Gingerbread. All others install ok but when i reboot it states "Kernal Open Failed" If i install other NANDS via USB flasher they seem to install fine, but then i no longer have AD Recovery Clockworkmod, which is very useful for backups. I appreciate that this is an additional statement but i also have the issue of my phone rebooting 6-10 times a day, hence wanting to change my NAND for testing. I have today however made a complete re-install and using a different SD card, still can't load other ZIP NAND's though.
Hey everyone,
I know there's probably another thread out there with this in but searching for a while has been fruitless now - maybe because this question is stupid. However, I'd like to know if it's possible to install an SD build of Android with cLK 1.5 as opposed to magldr. I would task 29 and use magldr, but sense builds don't work with it on my phone for some reason :S Whenever they boot with magldr I get a strange black and white striped screen and the phone bootloops. My fix for that was to try cLK which works perfectly. But I'd like to now install a Sense 4 ROM to my SD card to test it out, whilst keeping a stable sense ROM on my nand, just because it's stable and I don't want to upset the applecart too much
In short - any way to install SD Android ROMs through cLK 1.5?
Thanks!