hi there
i gave a problem with magdlr
i can not boot from android on sd?
its reboots before it boots up, or it will boot to the NAND rom?
when i choose AD SD..?
any help apriciated
Take a look at the thread for the SD card build you are trying to use to see if there are any special instructions to be able to use it with MAGLDR. I know some of the SD card builds require a different roof.img to be able to boot using MAGLDR. Also look for a readme file in the ROM that might have the needed information you are looking for. For example this quote comes from the American Android SD card build thread.
Includes optional rootfs.img that allows to boot build from magldr (!readme! in /sdcard/Android/SDMAGLDR)
Click to expand...
Click to collapse
Here is a link to the thread.
in mgldr menu go to 'services' then 'boot settings' then 'ad sd dir' then choose the directory of your sd android (which is bootable by mgldr as indicated in the previous post) after that you'll be automatically directed to the mgldr main menu. then choose 'boot ad sd' . booting takes longer than nand roms.
i have all that done
i am not noobish or what. but i dont understand this,
ive flashed wm back. and the sd build would boot up.
then back to magdlr. and the same thing again.. first time its rebooting.. second time it boots the nand rom.?
ive have some apps from my sd build in my nand rom? that is stranger than that all!
rooft img is replaced btw..
if i understand right, when you reboot you want your phone start by the sd build. in sd build thread look at 3 dak's MIUI rom's first post, there is an instruction for that. the second thing, i think is related to sd-ext partition, both sd and nand roms are using it so apps pass from one to the other.
ahh ok
ill try with a SD without an EXT partition..
lets see what happens then
i had putting an sd build @ a nokia 2 gb micro sd.. no ext partition
and i see the NAND bootscreen again ...
what could it be?
roofs.img is replaced, magdlr is correct configured,
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
mutil said:
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
Click to expand...
Click to collapse
yeck.. again...
ok i'll try..
i let it know if it works or not
blowtje90 said:
yeck.. again...
ok i'll try..
i let it know if it works or not
Click to expand...
Click to collapse
If you want your SD card build to be the default Android you boot with MAGLDR, then from the main menu of MAGLDR go to option #10 Services/0ption #1 Boot Settings/option #1 Boot Source/ option #1 Android from SD. This will tell MAGLDR to boot the SD card build by default.
Sorry I can not be of any more help booting SD Android builds with MAGLDR. I have never done it before so I really have not researched it.
the problem stays....
very strange... i have eerlier running perfectly 2 builds of android on my hd2 ..
If the kernel from sd build is nand kernel like tytung r10 then when you choose ad sd from magldr it will boot into nand build.if you have wm or wp7 into nand,there is no problem
Sent from my Nexus One using Tapatalk
ahh that is the issue.. thnx mate
the SD build i use uses a tytung r10 kernel
now i must search to a another compatible kernel, anyone some suggestions?
Related
ok so why cant i get android to boot past the htc logo? I have this rom (T-Mobile_HD2_MR_Software_3.14.531.1) with this radio (2.15.50.14) I have hspl3, perform task 29 loaded that rom n radio, put this android build on my reformatted sd card(CMYLXGOs.Droid.BlueTopia.v1.0.4) and it will not load past the htc Logo! What am i missing it has to be something simple i dont get it i have done this b4 but it now wont work!?!?!
ihateu said:
ok so why cant i get android to boot past the htc logo? I have this rom (T-Mobile_HD2_MR_Software_3.14.531.1) with this radio (2.15.50.14) I have hspl3, perform task 29 loaded that rom n radio, put this android build on my reformatted sd card(CMYLXGOs.Droid.BlueTopia.v1.0.4) and it will not load past the htc Logo! What am i missing it has to be something simple i dont get it i have done this b4 but it now wont work!?!?!
Click to expand...
Click to collapse
Try magldr and one of my nand roms and let me know what happens. My guess is its your sdcard.
-CMYLXGO
cmylxgo said:
Try magldr and one of my nand roms and let me know what happens. My guess is its your sdcard.
-CMYLXGO
Click to expand...
Click to collapse
yea i thought it could be the sd card too, but i tried to boot android from a different sd card,no luck. I will read up on how to do a nand rom and hopefully figure it out.
Google "SD Card Formatter" and then use FULL format with ERASE ON.
format
thanks i downloaded a panasonic sd card formater did a full full erase with it checked to "ON" it was reformatted but it said the device does not support Flash Erase.... im gonna try it out now
DUDE U ROCK MAN THAT DID IT THANK U SP MUCH!!!!!!!
I was using Android on the phone and I decided to upgrade Android to a better version of Android lol. My android is gone and I am stuck in MAGLDR..I tried to copy android and CWR to sd card and boot it in MAGLDR but nothing happens.
Is my phone forever like this now? or is there a way?
Appreciate your help! thanks
dicksonjoe said:
I was using Android on the phone and I decided to upgrade Android to a better version of Android lol. My android is gone and I am stuck in MAGLDR..I tried to copy android and CWR to sd card and boot it in MAGLDR but nothing happens.
Is my phone forever like this now? or is there a way?
Appreciate your help! thanks
Click to expand...
Click to collapse
can u xplain more about ur issue
Sent from my HTC HD 2 powered by HYPERDROID
I'v got exactly the same problem.
After deleting the ''old'' android and updating MAGLDR from 1.11 to 1.13 it just wont run CWM...
So i'm running stock ROM right now, Sucks!
did you install the new CWM?
Yes i did !
because magldr 1.13 and the latest cwm now work differently.
old way - cwm on sd card - magldr option 2 'boot ad sd' started cwm.
new way -
flash magldr 1.13
get new cwm, and flash it, , it now flashes to the nand, and doesnt require anything on sd to run, just the new partition layout.
Then, magldr - option 8 AD recovery starts cwm.
1. Reflash Radio .. I recommend the 2.15.50.14 Radio If you have a T-Mobile 1024
2. TASK29 Phone .. this will Clear / Erase The Rom
3. Reflash MAGLDR And ClockworkMod Recovery in that order! ( Get Files From Link! )
4. FORMAT SD CARD! FULL WIPE and FORMAT .. I use Panasonic SD Formatter
5. COPY Android Rom ZIP USING SD CARD READER! .. If you dont have one BUY One!
Do Not Use MAGLDR And ClockworkMod Recovery to Copy Rom Zip To SD CARD!
IF AFTER YOU HAVE DONE ALL OF THIS AND IT STILL FAILS .. TRY A NEW SD CARD!
I Have Seen Many Times Its a Bad SD Card!
All Programs & Everything you need is in this thread!
click> http://forum.xda-developers.com/showthread.php?t=981811
Thanks man, You knew exactly what was wrong. I had to install hspl from bootloader and then radio. From there, I got MAGDLR 1.13, usb storage mass, copied CWR and Nand. Thanks so much!
replacing sd card worked for me
I was going though the steps to set up dual boot for android and wm 6.5. I haven't put an android version on it yet, but I can't get it to go into wm 6.5 to do it later. Please help to get to wm 6.5 Please can't use phone.
Oops, ignore this post.
Hello everybody,
I can't seem to find an answer to this, though it seems to be a rather basic question.
Is it possible to run two different Android roms on one HD2?
I am currently running Hyperdroid cm7 (Clk-version) and would like to try either a MIUI Rom or a beta-ICS SD-Version, anyone know if and how this would be possible?
Thanks in advance, JW
sure is, through magldr, choose boot ad sd to boot to sd android, or boot ad nand to boot to nand. then, in magldr - services, you can set which you preffer to auto boot, or you can set it to always show the magldr menu and let you decide which to boot.
Thanks for the answer, though I'm not sure I'm willing to go back to Magldr, i like being able to charge my phone while its off.
Thank you though
and just how often is your phone off? mine hasnt been off for, oh, 18 months,,,
You are right on that one, but when I was used Magldr I used to be paranoid about my battery dying since I would have to somehow turn my phone on so it can charge (I am not sure if that would even be a problem, but I feel safe now ) - hope you understand what I mean - in my head it kinda makes sense^^
hehe, in teh event of a dead battery, an old usb cable with teh end cut off, red and black wires bared and held to the battery + and - for 60 seconds will give the battery enough juice to start booting and charging starts halfway thru booting.
JimWest7997 said:
You are right on that one, but when I was used Magldr I used to be paranoid about my battery dying since I would have to somehow turn my phone on so it can charge (I am not sure if that would even be a problem, but I feel safe now ) - hope you understand what I mean - in my head it kinda makes sense^^
Click to expand...
Click to collapse
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
I have been considering dual booting from SD and nand. Is it possible to have it automatically boot from the rom on the SD?
Sent from my HD2
oroo708 said:
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
Click to expand...
Click to collapse
Did you boot into MAGLDR, select AD SD Dir then boot into AD SD? If not, try booting into MAGLDR then selecting boot AD SD, should work
michaelnv710 said:
I have been considering dual booting from SD and nand. Is it possible to have it automatically boot from the rom on the SD?
Sent from my HD2
Click to expand...
Click to collapse
Yes, just go into bootsettings in Services (in MAGLDR) then select AD SD.
oroo708 said:
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
Click to expand...
Click to collapse
I was running WP7 and SD AS for long time and wanted to try NAND but when I tried to boot from SD again it would boot loop NAND boot screen. I flashed WP7 back to NAND and SD works, so I think there is something in the boot partition to allow for SD boot in WP7 build and not in the NAND since most of them use SD-EXT.
I also want to try out ICS, but need easy access to my daily SD (ACA)
I had the same problem. I learned only few Kernels are able to boot SD Builds via Magldr, as described in following thread: http://forum.xda-developers.com/showthread.php?t=1375554
I changed to a different Kernel that actually worked for me. But now I stuck at another problem. I wanted to apply a glitch fix but it seems that broke my SD AD .
war_child said:
I had the same problem. I learned only few Kernels are able to boot SD Builds via Magldr, as described in following thread: http://forum.xda-developers.com/showthread.php?t=1375554
I changed to a different Kernel that actually worked for me. But now I stuck at another problem. I wanted to apply a glitch fix but it seems that broke my SD AD .
Click to expand...
Click to collapse
War_child,
Which kernel should be changed then, i'm little confused. The NAND or SD. This might be a dead end since I would like to try ICS on NAND instead of WP7
You have to change the Kernel in SD Android
war_child said:
You have to change the Kernel in SD Android
Click to expand...
Click to collapse
have u tried hastarin kernel??
war_child said:
You have to change the Kernel in SD Android
Click to expand...
Click to collapse
Hmm, so the SD kernel boots fine when WP7 is in NAND but the same kernel doesn't when Android is in NAND. Interesting
oroo708 said:
have u tried hastarin kernel??
Click to expand...
Click to collapse
I tried 3Dak's R2.9, but I think as I now have to reinstall SD AD I will try hastarin.
... Hmm, so the SD kernel boots fine when WP7 is in NAND but the same kernel doesn't when Android is in NAND. Interesting
Click to expand...
Click to collapse
Seems like the other Kernels are scanning NAND for Android and only if nothing is found they boot from SD. But I'm no dev so it's just a guess
Well here is the problem:
1. My HD2's usb port is broken!:crying:
2. I am a native SD user, with MAGLDR but no AD Recovery installed whatsoever!
3. I had an Old BoyPPC DHD base sense 2.1 froyo rom on NAND(V23 i guess)(Since USB is dead, i cant flash ANYTHING!)
3. By mistake from 4EXT recovery for sd I did erase all partitions and now there is nothing on my NAND :crying::crying:
4. Now can i flash anything into the NAND space?? I dont know about the partition table of the previous rom or if even it had any!(In AROMA it shows NAND partition 299 mb and 297 mb free thats all i know!!)
5. I tried flashing tytung's 4.2.2 into NAND through 4EXT recovery for SD but i get bootloops!
6. In this scenario is there any rom that i can install on my NAND?ANYTHING!!??
Please guys! Help me with this!!:fingers-crossed::fingers-crossed:
@srinivas2 as your usb is broken, how are you going to recharge the hd2's battery??
i assume you have a charger. moving on
you can download clk (or black clk as i prefer) and flash it via sd card method (rename the nbh file to LEOIMG.nbh). in black clk, you can change system partition size right from inside of it. link for download: http://www.mediafire.com/?nhyausx0p5whu#tzg7whl9wwaih
go to compiled test versions, and download one of the latest. preferably the one with Ex-TWRP. you unzip it, get nbh file, rename to LEOIMG.nbh (in capital letters, yes) aND PUT IT ON ROOT OF SD CARD (sd should be fat32 formatted and have a maximum size of 4gb)
clk thread for instructions: http://forum.xda-developers.com/showthread.php?t=1114053
Caution: NEVER FLASH STOCK WINDOWS MOBILE rom with your usb port broken, as you'll be stuck on it forever(or until you fix usb port) since flashing stock wm rom overrides hspl
now you have black clk installed. inside of it go to settings (of, to go to black clk menu, hold back button just after you turn the hd2 on), resize partitions, system, choose your size and apply.
goto recovery.
in ex-twrp recovery, make an ext4 partition on your sd (most probably you already have one). after downloading rom you want and changing system size in clk to the one mentionned in rom thread, flash rom in ex-twrp.
Done
gilbert32 said:
@srinivas2 as your usb is broken, how are you going to recharge the hd2's battery??
i assume you have a charger. moving on
you can download clk (or black clk as i prefer) and flash it via sd card method (rename the nbh file to LEOIMG.nbh). in black clk, you can change system partition size right from inside of it. link for download: http://www.mediafire.com/?nhyausx0p5whu#tzg7whl9wwaih
go to compiled test versions, and download one of the latest. preferably the one with Ex-TWRP. you unzip it, get nbh file, rename to LEOIMG.nbh (in capital letters, yes) aND PUT IT ON ROOT OF SD CARD (sd should be fat32 formatted and have a maximum size of 4gb)
clk thread for instructions: http://forum.xda-developers.com/showthread.php?t=1114053
Caution: NEVER FLASH STOCK WINDOWS MOBILE rom with your usb port broken, as you'll be stuck on it forever(or until you fix usb port) since flashing stock wm rom overrides hspl
now you have black clk installed. inside of it go to settings (of, to go to black clk menu, hold back button just after you turn the hd2 on), resize partitions, system, choose your size and apply.
goto recovery.
in ex-twrp recovery, make an ext4 partition on your sd (most probably you already have one). after downloading rom you want and changing system size in clk to the one mentionned in rom thread, flash rom in ex-twrp.
Done
Click to expand...
Click to collapse
Thanks for the quick reply @gilbert32 :good:
I got the tracks for power redrawn for the USB port on the MB(Complex procedure but a guy did it for me here in Mumbai ). Now It takes a long time to charge, but roms with fast charge ability(Like tytung NexusHD 4.0.4) does the job best!
Well if i install clk, im gonna loose MAGLDR right?? Cuz i have no experience with clk whatsoever and i am used to MAGLDR. And i have read there have been problems with Native sd methods with clk, thats why i never dared to try it! And once to clk, there is no coming back to MAGLDR as it has no SD card method!
Anyhow currently with the Native sd method im running Nexus HD2 4.0.4! Still Having nothing on NAND is a problem right? Cuz i have weird problems with heating up! When HD2 heats up, it dosent boot from SD, i always have to boot NAND then switch back to SD roms!
And yes, im never gonna do the blunder of flashing the stock WM!
srinivas2 said:
Thanks for the quick reply @gilbert32 :good:
I got the tracks for power redrawn for the USB port on the MB(Complex procedure but a guy did it for me here in Mumbai ). Now It takes a long time to charge, but roms with fast charge ability(Like tytung NexusHD 4.0.4) does the job best!
Well if i install clk, im gonna loose MAGLDR right?? Cuz i have no experience with clk whatsoever and i am used to MAGLDR. And i have read there have been problems with Native sd methods with clk, thats why i never dared to try it! And once to clk, there is no coming back to MAGLDR as it has no SD card method!
Anyhow currently with the Native sd method im running Nexus HD2 4.0.4! Still Having nothing on NAND is a problem right? Cuz i have weird problems with heating up! When HD2 heats up, it dosent boot from SD, i always have to boot NAND then switch back to SD roms!
And yes, im never gonna do the blunder of flashing the stock WM!
Click to expand...
Click to collapse
First of all for thanks smash the thank button like i said in my sig
now regarding installing clk (black clk as i said, with included ex-twrp cz the normal 1.5 clk has no rec afaik), you will loose magldr. right.
and for installing with nativesd, it's very simple (rom should support clk btw, and most do). just in settings in clk, choose add sboot partition. this partition (5mb only) you will use to boot nativesd rom.
after flashing whatever nativesd rom, in ex-twrp (after creating sboot partition) go to advanced, nativesd manager, kernel update. touch sboot in the bottom to make sure it's selected, then choose the rom's folder from nativeSD folder on sd. Very simple.
when you want to boot nativesd not nand, hold the back button to boot to clk and choose boot sboot only. Very simple after you try
regarding installing stock wm, in some cases you may have to. then you will only have nativesd or sd android.
but you can still try custom roms (the have no spl flashing)
hope to help you
thanhhairau said:
hope to help you
Click to expand...
Click to collapse
The whole point of the 10 post rule is to stop people such as yourself posting stuff like this
thanhhairau said:
hurry..! hurry..! I can't wait too.
Click to expand...
Click to collapse
In development forums.
Thread moved.
Hello!
I'm novice on HD2, and I meet a little diffuclty...
(I'm French, sorry, my English is not verry correct)
I install my Rom Native_SD for the first time (I chose this one
http://forum.xda-developers.com/showthread.php?t=2224469
with :
Bootloader: MAGLDR v1.13
And Recovery: ClockworkMod Recovery 5.0.2.6.
After NativeSD installation, (everything seems correct) the phone reboot,
and on magldr I receive the following error message:
"Booting Android from NAND
Android load at 118000000
loading
yaffs2 boot is hand
Load zImage
nand kernel open failed"
An idea to help me?
I have probably forgotten a step...
When I choose installation : NAND with DataOnEXT
All is ok! The phone start on android, without default...
Thanks you for your help,
Jake
jake_42 said:
Hello!
I'm novice on HD2, and I meet a little diffuclty...
(I'm French, sorry, my English is not verry correct)
I install my Rom Native_SD for the first time (I chose this one
http://forum.xda-developers.com/showthread.php?t=2224469
with :
Bootloader: MAGLDR v1.13
And Recovery: ClockworkMod Recovery 5.0.2.6.
After NativeSD installation, (everything seems correct) the phone reboot,
and on magldr I receive the following error message:
"Booting Android from NAND
Android load at 118000000
loading
yaffs2 boot is hand
Load zImage
nand kernel open failed"
An idea to help me?
I have probably forgotten a step...
When I choose installation : NAND with DataOnEXT
All is ok! The phone start on android, without default...
Thanks you for your help,
Jake
Click to expand...
Click to collapse
what is happening is, that when you install nativesd rom, you should use BOOT AD SD option from magldr. rom is not installed on nand. just make magldr use nativesd folder from settings and then boot AD SD to boot the nativeSD rom
Hey gilbert32, so we meet again ;D
At the moment I'm switching my HD2 devices - what is better than 2 HD2? Of course, 3 HD2
The first time, I booted the NativeSD Hyperdroid in my HD2. The touch screen went unresponsible. I got another HD2 from a buddy, flashed MAGLDR, put in the SD Card, set MAGLDR to boot from AD and was happy. Now I want to do the same trick on yet another HD2, just installed HSPL, falshed MAGLDR, flashed CWM 5.whatever, changed settings to boot from SD, put in the SD card and MAGLDR is telling me (in red letters): "SD kernel open failed".
What is the problem here, what is wrong, what is the solution?
I just reflashed the NativeSD ROM via the target device, it's still saying "SD kernel open failed"
Can this be cause by a wrong partition size on the new target device?
I think you could look at:
Wrong block size,
Wrong partition type,
Partition not set as primary,
Partition not set active
Use minitool partition wizard home.
Sent from my Nexus 4 using xda app-developers app
Thank you jvzijp, but the SD is still working on the first and second HD2 like a Charm. Put in the SD, boot from SD, be happy.
But I recognized: The third HD2 (if booted with an NAND ROM) is stuck on some kind of Hyperdroid loading screen while booting. Maybe it's a case of bad blocks and I should try to resize the partition, a few MBs more to compensate the bad blocks?
Edit : I forgot to tell you, the device that's causing the trouble was a virgin. Till yesterday it ran windows mobile from stock. And the screen is cracked but still fully functional.
Hi JackDCalloway
I too bought a virgin hd2, reconditioned but running stock or any custom wm6.5 rom such as Artemis and Energy ROM's fine. I only have the one HD2 but have had one in the past and was surprised that my original SD card that used to run Android from SD using Haret didn't work.
I've tried allsorts so far to work around the issue, it sounds like you have exactly the same issue.
Please tell me.. are you able to boot into recovery (any recovery!) as I can't either from MAGLDR or SD (using 4EXT Recovery and similar)?
I'm sorry to hear you are experiencing this problem but am glad in a way that there is someone else with the same issue as me as I've been trying to resolve this for 2 months now and have spent many hours!