Hello everybody,
I can't seem to find an answer to this, though it seems to be a rather basic question.
Is it possible to run two different Android roms on one HD2?
I am currently running Hyperdroid cm7 (Clk-version) and would like to try either a MIUI Rom or a beta-ICS SD-Version, anyone know if and how this would be possible?
Thanks in advance, JW
sure is, through magldr, choose boot ad sd to boot to sd android, or boot ad nand to boot to nand. then, in magldr - services, you can set which you preffer to auto boot, or you can set it to always show the magldr menu and let you decide which to boot.
Thanks for the answer, though I'm not sure I'm willing to go back to Magldr, i like being able to charge my phone while its off.
Thank you though
and just how often is your phone off? mine hasnt been off for, oh, 18 months,,,
You are right on that one, but when I was used Magldr I used to be paranoid about my battery dying since I would have to somehow turn my phone on so it can charge (I am not sure if that would even be a problem, but I feel safe now ) - hope you understand what I mean - in my head it kinda makes sense^^
hehe, in teh event of a dead battery, an old usb cable with teh end cut off, red and black wires bared and held to the battery + and - for 60 seconds will give the battery enough juice to start booting and charging starts halfway thru booting.
JimWest7997 said:
You are right on that one, but when I was used Magldr I used to be paranoid about my battery dying since I would have to somehow turn my phone on so it can charge (I am not sure if that would even be a problem, but I feel safe now ) - hope you understand what I mean - in my head it kinda makes sense^^
Click to expand...
Click to collapse
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
I have been considering dual booting from SD and nand. Is it possible to have it automatically boot from the rom on the SD?
Sent from my HD2
oroo708 said:
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
Click to expand...
Click to collapse
Did you boot into MAGLDR, select AD SD Dir then boot into AD SD? If not, try booting into MAGLDR then selecting boot AD SD, should work
michaelnv710 said:
I have been considering dual booting from SD and nand. Is it possible to have it automatically boot from the rom on the SD?
Sent from my HD2
Click to expand...
Click to collapse
Yes, just go into bootsettings in Services (in MAGLDR) then select AD SD.
oroo708 said:
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
Click to expand...
Click to collapse
I was running WP7 and SD AS for long time and wanted to try NAND but when I tried to boot from SD again it would boot loop NAND boot screen. I flashed WP7 back to NAND and SD works, so I think there is something in the boot partition to allow for SD boot in WP7 build and not in the NAND since most of them use SD-EXT.
I also want to try out ICS, but need easy access to my daily SD (ACA)
I had the same problem. I learned only few Kernels are able to boot SD Builds via Magldr, as described in following thread: http://forum.xda-developers.com/showthread.php?t=1375554
I changed to a different Kernel that actually worked for me. But now I stuck at another problem. I wanted to apply a glitch fix but it seems that broke my SD AD .
war_child said:
I had the same problem. I learned only few Kernels are able to boot SD Builds via Magldr, as described in following thread: http://forum.xda-developers.com/showthread.php?t=1375554
I changed to a different Kernel that actually worked for me. But now I stuck at another problem. I wanted to apply a glitch fix but it seems that broke my SD AD .
Click to expand...
Click to collapse
War_child,
Which kernel should be changed then, i'm little confused. The NAND or SD. This might be a dead end since I would like to try ICS on NAND instead of WP7
You have to change the Kernel in SD Android
war_child said:
You have to change the Kernel in SD Android
Click to expand...
Click to collapse
have u tried hastarin kernel??
war_child said:
You have to change the Kernel in SD Android
Click to expand...
Click to collapse
Hmm, so the SD kernel boots fine when WP7 is in NAND but the same kernel doesn't when Android is in NAND. Interesting
oroo708 said:
have u tried hastarin kernel??
Click to expand...
Click to collapse
I tried 3Dak's R2.9, but I think as I now have to reinstall SD AD I will try hastarin.
... Hmm, so the SD kernel boots fine when WP7 is in NAND but the same kernel doesn't when Android is in NAND. Interesting
Click to expand...
Click to collapse
Seems like the other Kernels are scanning NAND for Android and only if nothing is found they boot from SD. But I'm no dev so it's just a guess
Related
I know this has been asked but i couldnt find the answer. I have Cope's gingerbread CM7 i booted the first time and it worked fine then i rebooted again and it just didn't pass the green htc screen. i waited 15 mins. what should i do? Delete and reinstall? format sd card? help please and thank u
I've seen a couple of things cause this...
1) The SD card may need reformatting... Of course (should go without saying), backup whatever you have on it first.
2) Pull the battery and try booting again.
3) If you're using CWM be sure you're using the 150MB partition setup for MDJs CM7 ROM.
dajakil said:
I know this has been asked but i couldnt find the answer. I have Cope's gingerbread CM7 i booted the first time and it worked fine then i rebooted again and it just didn't pass the green htc screen. i waited 15 mins. what should i do? Delete and reinstall? format sd card? help please and thank u
Click to expand...
Click to collapse
You using simple DAF flasher or CWM?
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
dajakil said:
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
Click to expand...
Click to collapse
CWM = Clockwork Mod which is used for flashing and backing up NAND roms. N/A to you as you are using an sd build.
As was suggested above, your best bet is to format your sd card and start again. Ensure you have a .50 radio - 2.07.50 or above IIRC
dajakil said:
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
Click to expand...
Click to collapse
Well, its a time for you to use NAND builds. No more HARET and CLRCAD with WM 6.5
Do you know how to do that?
rtimoff said:
Well, its a time for you to use NAND builds. No more HARET and CLRCAD with WM 6.5
Do you know how to do that?
Click to expand...
Click to collapse
yea i know but i want to be able to easily switch from android to WM quick. if im not on my laptop i won't be able to change it back if im on NAND. right? anyways ill format it and see what happens
dajakil said:
yea i know but i want to be able to easily switch from android to WM quick. if im not on my laptop i won't be able to change it back if im on NAND. right? anyways ill format it and see what happens
Click to expand...
Click to collapse
hi,i have the same problem with yours,my bool loader start at linux then suddenly stuck in htc logo.what do i need to do?tanks
donnarose said:
hi,i have the same problem with yours,my bool loader start at linux then suddenly stuck in htc logo.what do i need to do?tanks
Click to expand...
Click to collapse
Do you have the correct radio version? IIRC for sd Android builds you need 2.07.50.xx or higher .50 radio.
hi .
i put nand on my phone but i didn't really like it so put winmo back on and i wanted to put Android on the sd card. only problem now is when i press haret and android boots up it getting stuck on the android splash screen . and it doesn't load android . i have tryed it with a few different droid roms and it keeps happenin .
and i don't know what I'm missing .
can someone pls point me in the right direction pls .
regards
iainbp said:
hi .
i put nand on my phone but i didn't really like it so put winmo back on and i wanted to put Android on the sd card. only problem now is when i press haret and android boots up it getting stuck on the android splash screen . and it doesn't load android . i have tryed it with a few different droid roms and it keeps happenin .
and i don't know what I'm missing .
can someone pls point me in the right direction pls .
regards
Click to expand...
Click to collapse
Did you task 29 and reformat your SD card?
Snarksneeze said:
Did you task 29 and reformat your SD card?
Click to expand...
Click to collapse
no haven't done that . didn't think i needed to .
I'll have to copy all the stuff in my sd card then try again .
iainbp said:
no haven't done that . didn't think i needed to .
I'll have to copy all the stuff in my sd card then try again .
Click to expand...
Click to collapse
I also experience that way. What I did was try to flash task 29, flash magldr 1.13, flash CWM (be carefull that each rom require different partition lay out) and flash the Nandroid roms.
Good luck
silverwind said:
I also experience that way. What I did was try to flash task 29, flash magldr 1.13, flash CWM (be carefull that each rom require different partition lay out) and flash the Nandroid roms.
Good luck
Click to expand...
Click to collapse
except the op wants android and winmo, so no magldr/cwm
OP - try upgrading your radio, the stock one probably isn't high enough version to run android, which requires a ..50.. radio, and (unless you have a tmous) you may have a stock ..51.. radio now.
ive formatted my sd card but its not going into android .
ive got radio 2.15.50.14 is that the right radio to have ?
edit*** i know im missing something but i just cant work out what it is that im missing
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
thehumble1 said:
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
Click to expand...
Click to collapse
You don't need HSPL to boot from SD card using haret. All you need is WM and a .50 radio.
-HD2 Android-
thehumble1 said:
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
Click to expand...
Click to collapse
just reinstalled hspl4 2.08
and now just waiting for it to load , its staying on the rafdroid screen saver with the green htc man .
hope this works
edit*** screen is still on the green android man been on it for bout half hour i think . ive got a .50 radio but still not having any luck and i really dont know why
iainbp said:
just reinstalled hspl4 2.08
and now just waiting for it to load , its staying on the rafdroid screen saver with the green htc man .
hope this works
edit*** screen is still on the green android man been on it for bout half hour i think . ive got a .50 radio but still not having any luck and i really dont know why
Click to expand...
Click to collapse
Try going into your Android folder in Windows Mobile by using File Explorer, and deleting your data.img, or moving it to a separate folder on your SD card. This will erase any data you had under Android before, but at least it should boot, the 1st boot should take a bit longer than usual, because a new data.img will be creataed. If this doesn't work, you'll have to download and install a new build.
-HD2 Android-
huggs said:
Try going into your Android folder in Windows Mobile by using File Explorer, and deleting your data.img, or moving it to a separate folder on your SD card. This will erase any data you had under Android before, but at least it should boot, the 1st boot should take a bit longer than usual, because a new data.img will be creataed. If this doesn't work, you'll have to download and install a new build.
-HD2 Android-
Click to expand...
Click to collapse
thank you tryin it now.....
and thankyou to the rest of you guys for helping me , hope this works
edit*** nope still not loading , f**k knows why . cant think why it wont load , must be missing something,
i'll try a different rom and see if that works
what also can be a problem is that when you mobile is creating a data.img there isn't enough memory on your SD for the data.img, then it will get stuck on HTC logo
iainbp said:
ive formatted my sd card but its not going into android .
ive got radio 2.15.50.14 is that the right radio to have ?
edit*** i know im missing something but i just cant work out what it is that im missing
Click to expand...
Click to collapse
Did you do format to fat 32 with a full wipe? Our did you just do quick format? Do the full one. Or your d/l could be corrupted.
mattfmartin said:
Did you do format to fat 32 with a full wipe? Our did you just do quick format? Do the full one. Or your d/l could be corrupted.
Click to expand...
Click to collapse
yeah i did a full fat32 format
hi there
i gave a problem with magdlr
i can not boot from android on sd?
its reboots before it boots up, or it will boot to the NAND rom?
when i choose AD SD..?
any help apriciated
Take a look at the thread for the SD card build you are trying to use to see if there are any special instructions to be able to use it with MAGLDR. I know some of the SD card builds require a different roof.img to be able to boot using MAGLDR. Also look for a readme file in the ROM that might have the needed information you are looking for. For example this quote comes from the American Android SD card build thread.
Includes optional rootfs.img that allows to boot build from magldr (!readme! in /sdcard/Android/SDMAGLDR)
Click to expand...
Click to collapse
Here is a link to the thread.
in mgldr menu go to 'services' then 'boot settings' then 'ad sd dir' then choose the directory of your sd android (which is bootable by mgldr as indicated in the previous post) after that you'll be automatically directed to the mgldr main menu. then choose 'boot ad sd' . booting takes longer than nand roms.
i have all that done
i am not noobish or what. but i dont understand this,
ive flashed wm back. and the sd build would boot up.
then back to magdlr. and the same thing again.. first time its rebooting.. second time it boots the nand rom.?
ive have some apps from my sd build in my nand rom? that is stranger than that all!
rooft img is replaced btw..
if i understand right, when you reboot you want your phone start by the sd build. in sd build thread look at 3 dak's MIUI rom's first post, there is an instruction for that. the second thing, i think is related to sd-ext partition, both sd and nand roms are using it so apps pass from one to the other.
ahh ok
ill try with a SD without an EXT partition..
lets see what happens then
i had putting an sd build @ a nokia 2 gb micro sd.. no ext partition
and i see the NAND bootscreen again ...
what could it be?
roofs.img is replaced, magdlr is correct configured,
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
mutil said:
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
Click to expand...
Click to collapse
yeck.. again...
ok i'll try..
i let it know if it works or not
blowtje90 said:
yeck.. again...
ok i'll try..
i let it know if it works or not
Click to expand...
Click to collapse
If you want your SD card build to be the default Android you boot with MAGLDR, then from the main menu of MAGLDR go to option #10 Services/0ption #1 Boot Settings/option #1 Boot Source/ option #1 Android from SD. This will tell MAGLDR to boot the SD card build by default.
Sorry I can not be of any more help booting SD Android builds with MAGLDR. I have never done it before so I really have not researched it.
the problem stays....
very strange... i have eerlier running perfectly 2 builds of android on my hd2 ..
If the kernel from sd build is nand kernel like tytung r10 then when you choose ad sd from magldr it will boot into nand build.if you have wm or wp7 into nand,there is no problem
Sent from my Nexus One using Tapatalk
ahh that is the issue.. thnx mate
the SD build i use uses a tytung r10 kernel
now i must search to a another compatible kernel, anyone some suggestions?
Dear xda users,
My Girlfriend got a HD2 and I installed Android on it.
She used SD versions but she kills them everytime.
After a month the phone got stock on boot screen.
Then i tried to install NAND Roms but after 2 months of smooth running the same problem again... (example: Coredroid, and sense roms)
I think that the problem is that when the phone freeze she pull the battery out and after a few times the phone won't boot anymore.
Followed all the noob friendly guides.
Followed all the instructions in the post of every rom.
Installed the recommed radio, MAGDLR, CMW, data partions that were in the instructions
Common problem on sense roms?
Should i try to install no sense rom?
(Got experience with Desire HD flashing and Touch pro 2)
joostnl said:
Dear xda users,
My Girlfriend got a HD2 and I installed Android on it.
She used SD versions but she kills them everytime.
After a month the phone got stock on boot screen.
Then i tried to install NAND Roms but after 2 months of smooth running the same problem again... (example: Coredroid, and sense roms)
I think that the problem is that when the phone freeze she pull the battery out and after a few times the phone won't boot anymore.
Followed all the noob friendly guides.
Followed all the instructions in the post of every rom.
Installed the recommed radio, MAGDLR, CMW, data partions that were in the instructions
Common problem on sense roms?
Should i try to install no sense rom?
(Got experience with Desire HD flashing and Touch pro 2)
Click to expand...
Click to collapse
Hi,
It could be that with all the battery pulling, that the pins could be bent.
Make sure they are all straight.
Buy her an iphone, then she can't pull the battery! :-D
Sent from my HD2 using XDA App
malybru said:
Hi,
It could be that with all the battery pulling, that the pins could be bent.
Make sure they are all straight.
Click to expand...
Click to collapse
I don't think it's hardware related.. Because i can boot in the MAGLDR without any problems.. But when i wan't to boot android it hangs on the coredroid boot logo
(This happends with all roms (sense) i tried so far)
Boot into magldr and re run the rom from there,cleare the caches firsr ot course
Then glue the battery in - buy a tazer and promise her a double dose if she pulls the battery again
lol, hahaha
joostnl said:
I don't think it's hardware related.. Because i can boot in the MAGLDR without any problems.. But when i wan't to boot android it hangs on the coredroid boot logo
(This happends with all roms (sense) i tried so far)
Click to expand...
Click to collapse
ive seen a few posts where people have struggled with getting past boot logo, think it was fine after using a different partition in recovery but as your device is for the sd build am not quite sure how that works as Ive never had sd android or if having sd requires clockwork mod recovery? if so try different partition as i said earlier if not hang on till someone has the answer
johnerz said:
Boot into magldr and re run the rom from there,cleare the caches firsr ot course
Then glue the battery in - buy a tazer and promise her a double dose if she pulls the battery again
Click to expand...
Click to collapse
haha great answer, my girlfriend doesn't touch my hd2 or she gets alot more than a double dose with the tazer method, HD2 is not the solution for a women... you take the hd2 of her and buy her a iphone surly they are women material.
Ignore Post
Problems almost always occur after a few weeks or months of use for me, just reflash the ROM, and you'll good to go.
removing the battery is not recommended, it can corrupt files on the sd-card. Try to boot without sd-card and see if it helps. If your ROM does boot, it means the SD card is corrupted, you can try to backup the SD card and restore it after completely wiping the sd-card.
If your rom doesn't boot, than it meant there's something else going on, maybe corrupted flash, so reflash and try again. This will delete all your data, so be careful
if your girlfriend is not an daily flasher also might i suggest using a daf build. All the configuration is done for you. if you are using a sd build from magldr than make sure you change the name of the build than edit the startup txt like this "rel_path=whatever you name the build(example: "rel_path=MIUIROM nand_boot=1") the 1 for magldr 0 for windows 6.5. the reason for me saying this is all android builds create a folder android when they boot up with all your info like data and cache is in there. So its best to separate the two just in case you want to boot up more than two builds from sd.
Same here.
could be a bad block in your NAND memory. you can check this with cLK and fastboot.
see this post: http://forum.xda-developers.com/showpost.php?p=13600733&postcount=9
i checked mine and there was a bad block in the userdata. i think that is wy my phone was freezing.
now i have flashed cLK and untill now its working great!
Hi guys!
I took a HD2 by a friend that have installed Cyano on it, but sometimes it freeze and i have to remove the battery, so i tried some other ROMs installing CWM and flashing ROMs by the recovery.
Now I have these problems: a lot of times MAGLDR stucks after loading the ROM when says GO GO GO.
When the system could load it freeze after some using, sometimes after 5 min sometimes after 5 hrs.
The CWM I installed is 400MB, it's good for this ROM [Jan 10/01/2015][KK 4.4.4][ LiquidSmooth][Official] Kernel 3.0.101 [ION]? Or it could be this the problem?
I tried many times to start from the beginning of the porting process (HSPL, task29, MAGLDR, recovery, ROM), but nothing, it doesn't work..
Thank you for help!!
(Sorry for my bad english)
beast33 said:
Hi guys!
I took a HD2 by a friend that have installed Cyano on it, but sometimes it freeze and i have to remove the battery, so i tried some other ROMs installing CWM and flashing ROMs by the recovery.
Now I have these problems: a lot of times MAGLDR stucks after loading the ROM when says GO GO GO.
When the system could load it freeze after some using, sometimes after 5 min sometimes after 5 hrs.
The CWM I installed is 400MB, it's good for this ROM [Jan 10/01/2015][KK 4.4.4][ LiquidSmooth][Official] Kernel 3.0.101 [ION]? Or it could be this the problem?
I tried many times to start from the beginning of the porting process (HSPL, task29, MAGLDR, recovery, ROM), but nothing, it doesn't work..
Thank you for help!!
(Sorry for my bad english)
Click to expand...
Click to collapse
try using a system partition of 380 MB , also try to change recovery to ext4
EvilMegaDroid said:
try using a system partition of 380 MB , also try to change recovery to ext4
Click to expand...
Click to collapse
To use a 380 mb recovery can I change the space value from 400 to 380 in flash.cfg?
What do you mean with try to change recovery to ext4? I made a partition on my SD about 2GB ext4..
Thank you!
beast33 said:
To use a 380 mb recovery can I change the space value from 400 to 380 in flash.cfg?
What do you mean with try to change recovery to ext4? I made a partition on my SD about 2GB ext4..
Thank you!
Click to expand...
Click to collapse
hmm yes you can do that , about the recovery grab a SD version of ext4 and run it from sdcard as a second recovery to try it out , or you can download a nand version and replace it with recovery.img
EvilMegaDroid said:
hmm yes you can do that , about the recovery grab a SD version of ext4 and run it from sdcard as a second recovery to try it out , or you can download a nand version and replace it with recovery.img
Click to expand...
Click to collapse
Hi, I've tried your suggestions and it worked for one day and a half, then it freeze again. And after, when i managed to turn the device on after a lot of time it's stucks on GO GO GO, it freeze again after android lockscreen or a bit after, once one time it worked but without sim. It could be the SIM the problem? It is a 4g sim, but i think not.
Thank's you a lot!
hmm well i don't think its a sim problem , why don't you try to install the rom in nativesd and see if it works that way , check the nativesd instructions for more info how to do it
good point about nativeSD, it would eliminate nand bad blocks from the equation.
beast33, try getting a dmesg;
when stuck on magldr gogogo, push the red reset button under battery cover (don't pull battery)
go to magdr 10 services > dmesg to sd
on your sdcard look for file dmesg.txt and post it here.
to see if you have bad blocks and where they are.
Robbie P said:
good point about nativeSD, it would eliminate nand bad blocks from the equation.
beast33, try getting a dmesg;
when stuck on magldr gogogo, push the red reset button under battery cover (don't pull battery)
go to magdr 10 services > dmesg to sd
on your sdcard look for file dmesg.txt and post it here.
to see if you have bad blocks and where they are.
Click to expand...
Click to collapse
With nativeSD it's normal that the boot is longer than nand?
Now it seems working, it freeze only one time, but it stucks on GOGOGO more times than nand...
Attached there is the dmesg.txt file when the phone boot normally, I post the file also when it stucks on GOGOGO to see the difference.
Thank's a lot because this phone is very good even though is quite old and i love to use it like principal device!!
EDIT 04.02.15
Yesterday night i tried to stree a little the device and while installing WA it freeze and doesn't boot anymore, it always stucks on GOGOGO... I don't know what to do anymore, it's possibly that something inside is brocken?
Another little question: wich light and fast rom do you suggest for a every day use (possibly with italian language)?
END EDIT
beast33 said:
With nativeSD it's normal that the boot is longer than nand?
Now it seems working, it freeze only one time, but it stucks on GOGOGO more times than nand...
Attached there is the dmesg.txt file when the phone boot normally, I post the file also when it stucks on GOGOGO to see the difference.
Thank's a lot because this phone is very good even though is quite old and i love to use it like principal device!!
EDIT 04.02.15
Yesterday night i tried to stree a little the device and while installing WA it freeze and doesn't boot anymore, it always stucks on GOGOGO... I don't know what to do anymore, it's possibly that something inside is brocken?
Another little question: wich light and fast rom do you suggest for a every day use (possibly with italian language)?
END EDIT
Click to expand...
Click to collapse
I can't see any attachments
It does not sound good for the phone, but let us see what the dmesg(s) tell us.:fingers-crossed:
Sorry I forgot to post it
This is when the phone boot normally, when it freeze and not boot i post the other one!
It's normal that now with NativeSD the phone seems a lot slower than nand? (SD class 10)
beast33 said:
Sorry I forgot to post it
This is when the phone boot normally, when it freeze and not boot i post the other one!
Click to expand...
Click to collapse
No worries.
That one didn't work. It sometimes happens, especially if there was a long delay between pressing the reset button and getting the dmesg. Good luck with getting another one.
Robbie P said:
No worries.
That one didn't work. It sometimes happens, especially if there was a long delay between pressing the reset button and getting the dmesg. Good luck with getting another one.
Click to expand...
Click to collapse
This one work?
It's normal that now with nativeSD the phone is a lot slower than nand?
well it depends on what rom your using and also sdcard class , for example a class 10 sdcard is way faster than a class 4 sdcard , also what do you mean by slow , UI lag ? if that it happens to me too and maybe (i don't really know) its cuz your acessing data on the sdcard in the same time
beast33 said:
This one work?
It's normal that now with nativeSD the phone is a lot slower than nand?
Click to expand...
Click to collapse
It is better, I can see it is -pixelfreak-'s compiled 3.0.101 kernel, so assume the rom is liquidsmooth KK, but the dmesg stops before the nand bad blocks are listed (if there are any). I can't see anything causing reboots, others may know better. Try again
Robbie P said:
It is better, I can see it is -pixelfreak-'s compiled 3.0.101 kernel, so assume the rom is liquidsmooth KK, but the dmesg stops before the nand bad blocks are listed (if there are any). I can't see anything causing reboots, others may know better. Try again
Click to expand...
Click to collapse
Yes the rom is Liquidsmooth, do you suggest another lighter?
I can make dmseg also when the system boot normally? Or only when it stucks on GOGOGO?
Thank you for your patience!
beast33 said:
Yes the rom is Liquidsmooth, do you suggest another lighter?
I can make dmseg also when the system boot normally? Or only when it stucks on GOGOGO?
Thank you for your patience!
Click to expand...
Click to collapse
a dmesg after normal boot should show your nand bad blocks, if any, so would be good.
a dmesg immediately after it gets stuck on gogogo might show why it gets stuck, so would be good too
Robbie P said:
a dmesg after normal boot should show your nand bad blocks, if any, so would be good.
a dmesg immediately after it gets stuck on gogogo might show why it gets stuck, so would be good too
Click to expand...
Click to collapse
A little question: to make the dmesg after normal boot i have to boot magldr, make dmseg and then boot nativesd, right?
beast33 said:
A little question: to make the dmesg after normal boot i have to boot magldr, make dmseg and then boot nativesd, right?
Click to expand...
Click to collapse
Only difference is after a normal boot, you don't need to use the reset button, just switch off normally, then get your dmesg (dmesg to sd).
reset button gets you out of the hanging bit without removing battery, and thus the dmesg is still in memory when you use magldr to put it on the sdcard.
Not sure why you need to boot nativeSD after you put the dmesg onto sdcard, unless you are using usb to get the dmesg.txt onto pc and therefore onto xda, or are posting it using android via tapatalk. Note that unless you rename dmesg.txt, it will be overwritten the next time you put a dmesg to sd.
Robbie P said:
Only difference is after a normal boot, you don't need to use the reset button, just switch off normally, then get your dmesg (dmesg to sd).
reset button gets you out of the hanging bit without removing battery, and thus the dmesg is still in memory when you use magldr to put it on the sdcard.
Not sure why you need to boot nativeSD after you put the dmesg onto sdcard, unless you are using usb to get the dmesg.txt onto pc and therefore onto xda, or are posting it using android via tapatalk. Note that unless you rename dmesg.txt, it will be overwritten the next time you put a dmesg to sd.
Click to expand...
Click to collapse
This dmesg is after stuck on GOGOGO i hope it could help!