hi .
i put nand on my phone but i didn't really like it so put winmo back on and i wanted to put Android on the sd card. only problem now is when i press haret and android boots up it getting stuck on the android splash screen . and it doesn't load android . i have tryed it with a few different droid roms and it keeps happenin .
and i don't know what I'm missing .
can someone pls point me in the right direction pls .
regards
iainbp said:
hi .
i put nand on my phone but i didn't really like it so put winmo back on and i wanted to put Android on the sd card. only problem now is when i press haret and android boots up it getting stuck on the android splash screen . and it doesn't load android . i have tryed it with a few different droid roms and it keeps happenin .
and i don't know what I'm missing .
can someone pls point me in the right direction pls .
regards
Click to expand...
Click to collapse
Did you task 29 and reformat your SD card?
Snarksneeze said:
Did you task 29 and reformat your SD card?
Click to expand...
Click to collapse
no haven't done that . didn't think i needed to .
I'll have to copy all the stuff in my sd card then try again .
iainbp said:
no haven't done that . didn't think i needed to .
I'll have to copy all the stuff in my sd card then try again .
Click to expand...
Click to collapse
I also experience that way. What I did was try to flash task 29, flash magldr 1.13, flash CWM (be carefull that each rom require different partition lay out) and flash the Nandroid roms.
Good luck
silverwind said:
I also experience that way. What I did was try to flash task 29, flash magldr 1.13, flash CWM (be carefull that each rom require different partition lay out) and flash the Nandroid roms.
Good luck
Click to expand...
Click to collapse
except the op wants android and winmo, so no magldr/cwm
OP - try upgrading your radio, the stock one probably isn't high enough version to run android, which requires a ..50.. radio, and (unless you have a tmous) you may have a stock ..51.. radio now.
ive formatted my sd card but its not going into android .
ive got radio 2.15.50.14 is that the right radio to have ?
edit*** i know im missing something but i just cant work out what it is that im missing
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
thehumble1 said:
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
Click to expand...
Click to collapse
You don't need HSPL to boot from SD card using haret. All you need is WM and a .50 radio.
-HD2 Android-
thehumble1 said:
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
Click to expand...
Click to collapse
just reinstalled hspl4 2.08
and now just waiting for it to load , its staying on the rafdroid screen saver with the green htc man .
hope this works
edit*** screen is still on the green android man been on it for bout half hour i think . ive got a .50 radio but still not having any luck and i really dont know why
iainbp said:
just reinstalled hspl4 2.08
and now just waiting for it to load , its staying on the rafdroid screen saver with the green htc man .
hope this works
edit*** screen is still on the green android man been on it for bout half hour i think . ive got a .50 radio but still not having any luck and i really dont know why
Click to expand...
Click to collapse
Try going into your Android folder in Windows Mobile by using File Explorer, and deleting your data.img, or moving it to a separate folder on your SD card. This will erase any data you had under Android before, but at least it should boot, the 1st boot should take a bit longer than usual, because a new data.img will be creataed. If this doesn't work, you'll have to download and install a new build.
-HD2 Android-
huggs said:
Try going into your Android folder in Windows Mobile by using File Explorer, and deleting your data.img, or moving it to a separate folder on your SD card. This will erase any data you had under Android before, but at least it should boot, the 1st boot should take a bit longer than usual, because a new data.img will be creataed. If this doesn't work, you'll have to download and install a new build.
-HD2 Android-
Click to expand...
Click to collapse
thank you tryin it now.....
and thankyou to the rest of you guys for helping me , hope this works
edit*** nope still not loading , f**k knows why . cant think why it wont load , must be missing something,
i'll try a different rom and see if that works
what also can be a problem is that when you mobile is creating a data.img there isn't enough memory on your SD for the data.img, then it will get stuck on HTC logo
iainbp said:
ive formatted my sd card but its not going into android .
ive got radio 2.15.50.14 is that the right radio to have ?
edit*** i know im missing something but i just cant work out what it is that im missing
Click to expand...
Click to collapse
Did you do format to fat 32 with a full wipe? Our did you just do quick format? Do the full one. Or your d/l could be corrupted.
mattfmartin said:
Did you do format to fat 32 with a full wipe? Our did you just do quick format? Do the full one. Or your d/l could be corrupted.
Click to expand...
Click to collapse
yeah i did a full fat32 format
Related
ok so why cant i get android to boot past the htc logo? I have this rom (T-Mobile_HD2_MR_Software_3.14.531.1) with this radio (2.15.50.14) I have hspl3, perform task 29 loaded that rom n radio, put this android build on my reformatted sd card(CMYLXGOs.Droid.BlueTopia.v1.0.4) and it will not load past the htc Logo! What am i missing it has to be something simple i dont get it i have done this b4 but it now wont work!?!?!
ihateu said:
ok so why cant i get android to boot past the htc logo? I have this rom (T-Mobile_HD2_MR_Software_3.14.531.1) with this radio (2.15.50.14) I have hspl3, perform task 29 loaded that rom n radio, put this android build on my reformatted sd card(CMYLXGOs.Droid.BlueTopia.v1.0.4) and it will not load past the htc Logo! What am i missing it has to be something simple i dont get it i have done this b4 but it now wont work!?!?!
Click to expand...
Click to collapse
Try magldr and one of my nand roms and let me know what happens. My guess is its your sdcard.
-CMYLXGO
cmylxgo said:
Try magldr and one of my nand roms and let me know what happens. My guess is its your sdcard.
-CMYLXGO
Click to expand...
Click to collapse
yea i thought it could be the sd card too, but i tried to boot android from a different sd card,no luck. I will read up on how to do a nand rom and hopefully figure it out.
Google "SD Card Formatter" and then use FULL format with ERASE ON.
format
thanks i downloaded a panasonic sd card formater did a full full erase with it checked to "ON" it was reformatted but it said the device does not support Flash Erase.... im gonna try it out now
DUDE U ROCK MAN THAT DID IT THANK U SP MUCH!!!!!!!
I know this has been asked but i couldnt find the answer. I have Cope's gingerbread CM7 i booted the first time and it worked fine then i rebooted again and it just didn't pass the green htc screen. i waited 15 mins. what should i do? Delete and reinstall? format sd card? help please and thank u
I've seen a couple of things cause this...
1) The SD card may need reformatting... Of course (should go without saying), backup whatever you have on it first.
2) Pull the battery and try booting again.
3) If you're using CWM be sure you're using the 150MB partition setup for MDJs CM7 ROM.
dajakil said:
I know this has been asked but i couldnt find the answer. I have Cope's gingerbread CM7 i booted the first time and it worked fine then i rebooted again and it just didn't pass the green htc screen. i waited 15 mins. what should i do? Delete and reinstall? format sd card? help please and thank u
Click to expand...
Click to collapse
You using simple DAF flasher or CWM?
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
dajakil said:
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
Click to expand...
Click to collapse
CWM = Clockwork Mod which is used for flashing and backing up NAND roms. N/A to you as you are using an sd build.
As was suggested above, your best bet is to format your sd card and start again. Ensure you have a .50 radio - 2.07.50 or above IIRC
dajakil said:
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
Click to expand...
Click to collapse
Well, its a time for you to use NAND builds. No more HARET and CLRCAD with WM 6.5
Do you know how to do that?
rtimoff said:
Well, its a time for you to use NAND builds. No more HARET and CLRCAD with WM 6.5
Do you know how to do that?
Click to expand...
Click to collapse
yea i know but i want to be able to easily switch from android to WM quick. if im not on my laptop i won't be able to change it back if im on NAND. right? anyways ill format it and see what happens
dajakil said:
yea i know but i want to be able to easily switch from android to WM quick. if im not on my laptop i won't be able to change it back if im on NAND. right? anyways ill format it and see what happens
Click to expand...
Click to collapse
hi,i have the same problem with yours,my bool loader start at linux then suddenly stuck in htc logo.what do i need to do?tanks
donnarose said:
hi,i have the same problem with yours,my bool loader start at linux then suddenly stuck in htc logo.what do i need to do?tanks
Click to expand...
Click to collapse
Do you have the correct radio version? IIRC for sd Android builds you need 2.07.50.xx or higher .50 radio.
Ok guys this is really frustrating. I have Android ROM and I want to try WP7 ROM. But every-time I install any ROM I am either stuck on GO GO GO or afterwards I am stuck on white screen with green HTC logo in the middle. I performed task29 before installing anything. I suspect on my SD-Card( I have Kingston 4 GB Class 2), so I borrow another one-Transcend 8 GB Class 6. And again the same problem, WP7 is is stuck on GO GO GO or white screen with HTC logo. What can be the possible explanation here? Anyone?
TnX
it could be a number of things, ive found the best way is to start again. SD flash an original wm6 stock ROM, then install hspl 2.08 > radio 2.15 > magldr 1.13 > os
take you SD card and download SDformatter, format it again
try again.
note that both your cards may not work and if you search you will find all of this info
Tnx mate, but I do the procedure 4 times without success. I still suspect that the problem is with the SD-Cards. Today hopefully I will try with SanDisk 16 Gb class 6. From what I read SanDisk is most used. And if this failed, I will flash stock WinMo 6.5 and reinstall everything again.
TNx
Sent from my HTC HD2 using XDA App
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Ziaren said:
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Click to expand...
Click to collapse
dont do the task29
SD flash WM6.5, HSPL, radio, magldr, flash OS
oh i wouldnt go with a class 6, whilst some folk have had working ones many more havent got it working, class 2 or 4 is best, just because its a class 2 doesnt mean its slower than class 6, infact many folk, myself included believe the class 2 and 4 is quicker
Did exacly what u said.
WM6.5 --> HSPL --> radio --> magldr --> flash YukiXDA'a OS
htc logo stuck
As i said i have another hd2 which is running on wp7 for a week... ive done exacly same thing to the both of them and one is not working... Is there something else what i can do?
Ziaren said:
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Click to expand...
Click to collapse
Hmm, so your saying thatyou have access to 2 HD2s, running/trying to run WP7 and that one of them works with the SD card but the other doesnt work with it?
Ok I forgot to replay that I did it . In my case there was no need for stock ROM. I just:
1. Did task29
2. Installed WinMo ROM (In my case Dutty's V25)
3. Install MAGLDR
4. Install Wp7 ROM...and it works
dazza9075 said:
Hmm, so your saying thatyou have access to 2 HD2s, running/trying to run WP7 and that one of them works with the SD card but the other doesnt work with it?
Click to expand...
Click to collapse
Yep. Im doing EXACLY same thing to the 2 devices. Using the same SD card. First phone is booting and working second is not.
Tried about 5 times (to both of 'em to be sure). I have enough. This just can’t be done. Don’t know why. Maybe there is something wrong with memory? IDK... but this is extremely frustrating.
Ziaren, Do you have 2 SD cards with your 2 HD2s?
Have you tried with both sd cards on your HD2 that has this trouble?
Just a thought.
Good luck
Ziaren said:
Yep. Im doing EXACLY same thing to the 2 devices. Using the same SD card. First phone is booting and working second is not.
Tried about 5 times (to both of 'em to be sure). I have enough. This just can’t be done. Don’t know why. Maybe there is something wrong with memory? IDK... but this is extremely frustrating.
Click to expand...
Click to collapse
Have you tried to flash your stock ROM, then to re-flash everything? (HSPL, WinMo, MAGLDR and WP7)
Hello everybody,
I can't seem to find an answer to this, though it seems to be a rather basic question.
Is it possible to run two different Android roms on one HD2?
I am currently running Hyperdroid cm7 (Clk-version) and would like to try either a MIUI Rom or a beta-ICS SD-Version, anyone know if and how this would be possible?
Thanks in advance, JW
sure is, through magldr, choose boot ad sd to boot to sd android, or boot ad nand to boot to nand. then, in magldr - services, you can set which you preffer to auto boot, or you can set it to always show the magldr menu and let you decide which to boot.
Thanks for the answer, though I'm not sure I'm willing to go back to Magldr, i like being able to charge my phone while its off.
Thank you though
and just how often is your phone off? mine hasnt been off for, oh, 18 months,,,
You are right on that one, but when I was used Magldr I used to be paranoid about my battery dying since I would have to somehow turn my phone on so it can charge (I am not sure if that would even be a problem, but I feel safe now ) - hope you understand what I mean - in my head it kinda makes sense^^
hehe, in teh event of a dead battery, an old usb cable with teh end cut off, red and black wires bared and held to the battery + and - for 60 seconds will give the battery enough juice to start booting and charging starts halfway thru booting.
JimWest7997 said:
You are right on that one, but when I was used Magldr I used to be paranoid about my battery dying since I would have to somehow turn my phone on so it can charge (I am not sure if that would even be a problem, but I feel safe now ) - hope you understand what I mean - in my head it kinda makes sense^^
Click to expand...
Click to collapse
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
I have been considering dual booting from SD and nand. Is it possible to have it automatically boot from the rom on the SD?
Sent from my HD2
oroo708 said:
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
Click to expand...
Click to collapse
Did you boot into MAGLDR, select AD SD Dir then boot into AD SD? If not, try booting into MAGLDR then selecting boot AD SD, should work
michaelnv710 said:
I have been considering dual booting from SD and nand. Is it possible to have it automatically boot from the rom on the SD?
Sent from my HD2
Click to expand...
Click to collapse
Yes, just go into bootsettings in Services (in MAGLDR) then select AD SD.
oroo708 said:
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
Click to expand...
Click to collapse
I was running WP7 and SD AS for long time and wanted to try NAND but when I tried to boot from SD again it would boot loop NAND boot screen. I flashed WP7 back to NAND and SD works, so I think there is something in the boot partition to allow for SD boot in WP7 build and not in the NAND since most of them use SD-EXT.
I also want to try out ICS, but need easy access to my daily SD (ACA)
I had the same problem. I learned only few Kernels are able to boot SD Builds via Magldr, as described in following thread: http://forum.xda-developers.com/showthread.php?t=1375554
I changed to a different Kernel that actually worked for me. But now I stuck at another problem. I wanted to apply a glitch fix but it seems that broke my SD AD .
war_child said:
I had the same problem. I learned only few Kernels are able to boot SD Builds via Magldr, as described in following thread: http://forum.xda-developers.com/showthread.php?t=1375554
I changed to a different Kernel that actually worked for me. But now I stuck at another problem. I wanted to apply a glitch fix but it seems that broke my SD AD .
Click to expand...
Click to collapse
War_child,
Which kernel should be changed then, i'm little confused. The NAND or SD. This might be a dead end since I would like to try ICS on NAND instead of WP7
You have to change the Kernel in SD Android
war_child said:
You have to change the Kernel in SD Android
Click to expand...
Click to collapse
have u tried hastarin kernel??
war_child said:
You have to change the Kernel in SD Android
Click to expand...
Click to collapse
Hmm, so the SD kernel boots fine when WP7 is in NAND but the same kernel doesn't when Android is in NAND. Interesting
oroo708 said:
have u tried hastarin kernel??
Click to expand...
Click to collapse
I tried 3Dak's R2.9, but I think as I now have to reinstall SD AD I will try hastarin.
... Hmm, so the SD kernel boots fine when WP7 is in NAND but the same kernel doesn't when Android is in NAND. Interesting
Click to expand...
Click to collapse
Seems like the other Kernels are scanning NAND for Android and only if nothing is found they boot from SD. But I'm no dev so it's just a guess
Hi,
I'm in the middle of the jungle literally and i only have my phone with me... I'm trying to install the evohd2 ics rom but my sys part is only 160mb...is their any way I can resize it without a computer....?
Thx
If you have cLK boot loader, you can.
Just wipe all via recovery.
Then boot to cLK by long pressing back button and power. You will find the option there.
BTW, this should have been posted in the General or Q&A section, not development.
Mods please relocate this thread.
Sent with love from me to you via HTC HD2
Sorry for posting in the wrong forum I don't have clk I have magldr.... I'm I out of luck?
Thread moved to proper forum.
Sent from my GT-I9300 using xda premium
zozew said:
Sorry for posting in the wrong forum I don't have clk I have magldr.... I'm I out of luck?
Click to expand...
Click to collapse
Yes, why do you prefer MAGLDR if you run android?
It's not that I prefer it its just that's what's on the phone.... Don't I need a computer to change to clk? Or am I totally off track?
My situation is this I have my tmob HTC hd2 with magldr, i'm in the middle of nowhere with just my phone I'm not programming noob but, I haven't been flashing my hd2 more than once... Actually twice i tried a pacman 4.1.2 rom as it only needed 145mb sys part, I'm actually running it now.... But it's lagging quite a bit no disrespect intended.... Probably my installation at fault... So I read that the evohd2 4.0.4 rom was supposed to be quite fast... But it needs at least 200mb syspart...
So if you say I can use clk to repartition, how can I get it on my phone without a computer just give me a link if you know where I should start looking.... I've Google and searched.... But all leads to the hd2 toolkit which I sadly can't use
there u r mate
the attached file is clk with touch recovery included.
rename the file with leoimg.nbh then put it on root of yr sd card and flash it
you dont need a pc to make repartition yr nand u can use it with inbuilt repartition option with this great tool
credit goes to the kokotas and their team.
You mean flash it like flashing a new power up splash screen? Volume down plus power button?
kslakhani said:
there u r mate
the attached file is clk with touch recovery included.
rename the file with leoimg.nbh then put it on root of yr sd card and flash it
you dont need a pc to make repartition yr nand u can use it with inbuilt repartition option with this great tool
credit goes to the kokotas and their team.
Click to expand...
Click to collapse
I did flash it and it took a few reboots because it got stuck on the recovery team splash screen...but finally it booted the touch recovery: ) i repartotioned the sys part and reflashed the pacman jelly bean rom just to try amd run it clean...and its not bad: )ill try it for a day now and see
Thx a bunch
sSo thought I'd just update...
I managed to wipe and clean all partitions and install the NexusHD2 ics rom and it's running like the wind only problem is that takes up to ten times to reboot to get it to load the touch recovery... So I got a little scared I'd bricked it.
. But it's ok now thanks a bunch
great u managed it in the middle of jungle right
actually clk is great tool. the only prob with clk is it doesnt support rmnet network it supports only ppp
hope soon devs gonna fix this
sorry i was away so late response
oh yes forgot to tell u clk recovery takes a while but let it be on very first boot its ok approx 10 mins(yeah i kno its too much)