Database Users

[Q] Stuck at HTC logo boot screen.

I know this has been asked but i couldnt find the answer. I have Cope's gingerbread CM7 i booted the first time and it worked fine then i rebooted again and it just didn't pass the green htc screen. i waited 15 mins. what should i do? Delete and reinstall? format sd card? help please and thank u

I've seen a couple of things cause this...
1) The SD card may need reformatting... Of course (should go without saying), backup whatever you have on it first.
2) Pull the battery and try booting again.
3) If you're using CWM be sure you're using the 150MB partition setup for MDJs CM7 ROM.

dajakil said:
I know this has been asked but i couldnt find the answer. I have Cope's gingerbread CM7 i booted the first time and it worked fine then i rebooted again and it just didn't pass the green htc screen. i waited 15 mins. what should i do? Delete and reinstall? format sd card? help please and thank u
Click to expand...
Click to collapse
You using simple DAF flasher or CWM?

What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that

dajakil said:
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
Click to expand...
Click to collapse
CWM = Clockwork Mod which is used for flashing and backing up NAND roms. N/A to you as you are using an sd build.
As was suggested above, your best bet is to format your sd card and start again. Ensure you have a .50 radio - 2.07.50 or above IIRC

dajakil said:
What's CWM?? im just using an sd build HARET and CLRCAD. i think i have the updated radio also. all builds work fine and this worked first time, now it just started to do that
Click to expand...
Click to collapse
Well, its a time for you to use NAND builds. No more HARET and CLRCAD with WM 6.5
Do you know how to do that?

rtimoff said:
Well, its a time for you to use NAND builds. No more HARET and CLRCAD with WM 6.5
Do you know how to do that?
Click to expand...
Click to collapse
yea i know but i want to be able to easily switch from android to WM quick. if im not on my laptop i won't be able to change it back if im on NAND. right? anyways ill format it and see what happens

dajakil said:
yea i know but i want to be able to easily switch from android to WM quick. if im not on my laptop i won't be able to change it back if im on NAND. right? anyways ill format it and see what happens
Click to expand...
Click to collapse
hi,i have the same problem with yours,my bool loader start at linux then suddenly stuck in htc logo.what do i need to do?tanks

donnarose said:
hi,i have the same problem with yours,my bool loader start at linux then suddenly stuck in htc logo.what do i need to do?tanks
Click to expand...
Click to collapse
Do you have the correct radio version? IIRC for sd Android builds you need 2.07.50.xx or higher .50 radio.

[Q] not a noob but I'm stuck

hi .
i put nand on my phone but i didn't really like it so put winmo back on and i wanted to put Android on the sd card. only problem now is when i press haret and android boots up it getting stuck on the android splash screen . and it doesn't load android . i have tryed it with a few different droid roms and it keeps happenin .
and i don't know what I'm missing .
can someone pls point me in the right direction pls .
regards

iainbp said:
hi .
i put nand on my phone but i didn't really like it so put winmo back on and i wanted to put Android on the sd card. only problem now is when i press haret and android boots up it getting stuck on the android splash screen . and it doesn't load android . i have tryed it with a few different droid roms and it keeps happenin .
and i don't know what I'm missing .
can someone pls point me in the right direction pls .
regards
Click to expand...
Click to collapse
Did you task 29 and reformat your SD card?

Snarksneeze said:
Did you task 29 and reformat your SD card?
Click to expand...
Click to collapse
no haven't done that . didn't think i needed to .
I'll have to copy all the stuff in my sd card then try again .

iainbp said:
no haven't done that . didn't think i needed to .
I'll have to copy all the stuff in my sd card then try again .
Click to expand...
Click to collapse
I also experience that way. What I did was try to flash task 29, flash magldr 1.13, flash CWM (be carefull that each rom require different partition lay out) and flash the Nandroid roms.
Good luck

silverwind said:
I also experience that way. What I did was try to flash task 29, flash magldr 1.13, flash CWM (be carefull that each rom require different partition lay out) and flash the Nandroid roms.
Good luck
Click to expand...
Click to collapse
except the op wants android and winmo, so no magldr/cwm
OP - try upgrading your radio, the stock one probably isn't high enough version to run android, which requires a ..50.. radio, and (unless you have a tmous) you may have a stock ..51.. radio now.

ive formatted my sd card but its not going into android .
ive got radio 2.15.50.14 is that the right radio to have ?
edit*** i know im missing something but i just cant work out what it is that im missing

And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.

thehumble1 said:
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
Click to expand...
Click to collapse
You don't need HSPL to boot from SD card using haret. All you need is WM and a .50 radio.
-HD2 Android-

thehumble1 said:
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
Click to expand...
Click to collapse
just reinstalled hspl4 2.08
and now just waiting for it to load , its staying on the rafdroid screen saver with the green htc man .
hope this works
edit*** screen is still on the green android man been on it for bout half hour i think . ive got a .50 radio but still not having any luck and i really dont know why

iainbp said:
just reinstalled hspl4 2.08
and now just waiting for it to load , its staying on the rafdroid screen saver with the green htc man .
hope this works
edit*** screen is still on the green android man been on it for bout half hour i think . ive got a .50 radio but still not having any luck and i really dont know why
Click to expand...
Click to collapse
Try going into your Android folder in Windows Mobile by using File Explorer, and deleting your data.img, or moving it to a separate folder on your SD card. This will erase any data you had under Android before, but at least it should boot, the 1st boot should take a bit longer than usual, because a new data.img will be creataed. If this doesn't work, you'll have to download and install a new build.
-HD2 Android-

huggs said:
Try going into your Android folder in Windows Mobile by using File Explorer, and deleting your data.img, or moving it to a separate folder on your SD card. This will erase any data you had under Android before, but at least it should boot, the 1st boot should take a bit longer than usual, because a new data.img will be creataed. If this doesn't work, you'll have to download and install a new build.
-HD2 Android-
Click to expand...
Click to collapse
thank you tryin it now.....
and thankyou to the rest of you guys for helping me , hope this works
edit*** nope still not loading , f**k knows why . cant think why it wont load , must be missing something,
i'll try a different rom and see if that works

what also can be a problem is that when you mobile is creating a data.img there isn't enough memory on your SD for the data.img, then it will get stuck on HTC logo

iainbp said:
ive formatted my sd card but its not going into android .
ive got radio 2.15.50.14 is that the right radio to have ?
edit*** i know im missing something but i just cant work out what it is that im missing
Click to expand...
Click to collapse
Did you do format to fat 32 with a full wipe? Our did you just do quick format? Do the full one. Or your d/l could be corrupted.

mattfmartin said:
Did you do format to fat 32 with a full wipe? Our did you just do quick format? Do the full one. Or your d/l could be corrupted.
Click to expand...
Click to collapse
yeah i did a full fat32 format

USB never recognizes. Guess my HD2 is done. It had a great life.

Got home from work and went to go check the time, and the lockscreen wouldnt come back up on my Android SD build, I've had my phone the same way for over a month. Reset the phone, boots into nand WP7.. all my info is gone. Boot loop ever few minutes..again.. never had any problems. So I'm guessing the SD fried on me. Flashed to stock, formatted sd..went from 16GB to 30MB.. yep sd is fried. Flashed magdlr, then a nand build, reboots and says nand kernel failed.. now nothing recognizes the USB connection, nothing at all..
Guess its done now huh?

jinsoku3g said:
Got home from work and went to go check the time, and the lockscreen wouldnt come back up on my Android SD build, I've had my phone the same way for over a month. Reset the phone, boots into nand WP7.. all my info is gone. Boot loop ever few minutes..again.. never had any problems. So I'm guessing the SD fried on me. Flashed to stock, formatted sd..went from 16GB to 30MB.. yep sd is fried. Flashed magdlr, then a nand build, reboots and says nand kernel failed.. now nothing recognizes the USB connection, nothing at all..
Guess its done now huh?
Click to expand...
Click to collapse
If you are able to go into bootloader, there might be a chance.
Try flash the CORRECT stock rom using SD card method.
Good luck

boot loader is fine, the stock rom that I use is from tmo..
i wonder why the flash of android nand has looked successfull but said kernel open failed

jinsoku3g said:
boot loader is fine, the stock rom that I use is from tmo..
i wonder why the flash of android nand has looked successfull but said kernel open failed
Click to expand...
Click to collapse
Run a Task 29 and then reflash MAGLDR 1.13 and flash Clock Work Mod(CWM) to your HD2 and use CWM to flash the Android ROM. Check my sig for links to MAGLDR and CWM.

Stuck at MAGLDR

I was using Android on the phone and I decided to upgrade Android to a better version of Android lol. My android is gone and I am stuck in MAGLDR..I tried to copy android and CWR to sd card and boot it in MAGLDR but nothing happens.
Is my phone forever like this now? or is there a way?
Appreciate your help! thanks

dicksonjoe said:
I was using Android on the phone and I decided to upgrade Android to a better version of Android lol. My android is gone and I am stuck in MAGLDR..I tried to copy android and CWR to sd card and boot it in MAGLDR but nothing happens.
Is my phone forever like this now? or is there a way?
Appreciate your help! thanks
Click to expand...
Click to collapse
can u xplain more about ur issue
Sent from my HTC HD 2 powered by HYPERDROID

I'v got exactly the same problem.
After deleting the ''old'' android and updating MAGLDR from 1.11 to 1.13 it just wont run CWM...
So i'm running stock ROM right now, Sucks!

did you install the new CWM?

Yes i did !

because magldr 1.13 and the latest cwm now work differently.
old way - cwm on sd card - magldr option 2 'boot ad sd' started cwm.
new way -
flash magldr 1.13
get new cwm, and flash it, , it now flashes to the nand, and doesnt require anything on sd to run, just the new partition layout.
Then, magldr - option 8 AD recovery starts cwm.

1. Reflash Radio .. I recommend the 2.15.50.14 Radio If you have a T-Mobile 1024
2. TASK29 Phone .. this will Clear / Erase The Rom
3. Reflash MAGLDR And ClockworkMod Recovery in that order! ( Get Files From Link! )
4. FORMAT SD CARD! FULL WIPE and FORMAT .. I use Panasonic SD Formatter
5. COPY Android Rom ZIP USING SD CARD READER! .. If you dont have one BUY One!
Do Not Use MAGLDR And ClockworkMod Recovery to Copy Rom Zip To SD CARD!
IF AFTER YOU HAVE DONE ALL OF THIS AND IT STILL FAILS .. TRY A NEW SD CARD!
I Have Seen Many Times Its a Bad SD Card!
All Programs & Everything you need is in this thread!
click> http://forum.xda-developers.com/showthread.php?t=981811

Thanks man, You knew exactly what was wrong. I had to install hspl from bootloader and then radio. From there, I got MAGDLR 1.13, usb storage mass, copied CWR and Nand. Thanks so much!

replacing sd card worked for me

I was going though the steps to set up dual boot for android and wm 6.5. I haven't put an android version on it yet, but I can't get it to go into wm 6.5 to do it later. Please help to get to wm 6.5 Please can't use phone.

Oops, ignore this post.

[Q] Problem with installing WP7

Ok guys this is really frustrating. I have Android ROM and I want to try WP7 ROM. But every-time I install any ROM I am either stuck on GO GO GO or afterwards I am stuck on white screen with green HTC logo in the middle. I performed task29 before installing anything. I suspect on my SD-Card( I have Kingston 4 GB Class 2), so I borrow another one-Transcend 8 GB Class 6. And again the same problem, WP7 is is stuck on GO GO GO or white screen with HTC logo. What can be the possible explanation here? Anyone?
TnX

it could be a number of things, ive found the best way is to start again. SD flash an original wm6 stock ROM, then install hspl 2.08 > radio 2.15 > magldr 1.13 > os
take you SD card and download SDformatter, format it again
try again.
note that both your cards may not work and if you search you will find all of this info

Tnx mate, but I do the procedure 4 times without success. I still suspect that the problem is with the SD-Cards. Today hopefully I will try with SanDisk 16 Gb class 6. From what I read SanDisk is most used. And if this failed, I will flash stock WinMo 6.5 and reinstall everything again.
TNx
Sent from my HTC HD2 using XDA App

I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?

Ziaren said:
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Click to expand...
Click to collapse
dont do the task29
SD flash WM6.5, HSPL, radio, magldr, flash OS
oh i wouldnt go with a class 6, whilst some folk have had working ones many more havent got it working, class 2 or 4 is best, just because its a class 2 doesnt mean its slower than class 6, infact many folk, myself included believe the class 2 and 4 is quicker

Did exacly what u said.
WM6.5 --> HSPL --> radio --> magldr --> flash YukiXDA'a OS
htc logo stuck
As i said i have another hd2 which is running on wp7 for a week... ive done exacly same thing to the both of them and one is not working... Is there something else what i can do?

Ziaren said:
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Click to expand...
Click to collapse
Hmm, so your saying thatyou have access to 2 HD2s, running/trying to run WP7 and that one of them works with the SD card but the other doesnt work with it?

Ok I forgot to replay that I did it . In my case there was no need for stock ROM. I just:
1. Did task29
2. Installed WinMo ROM (In my case Dutty's V25)
3. Install MAGLDR
4. Install Wp7 ROM...and it works

dazza9075 said:
Hmm, so your saying thatyou have access to 2 HD2s, running/trying to run WP7 and that one of them works with the SD card but the other doesnt work with it?
Click to expand...
Click to collapse
Yep. Im doing EXACLY same thing to the 2 devices. Using the same SD card. First phone is booting and working second is not.
Tried about 5 times (to both of 'em to be sure). I have enough. This just can’t be done. Don’t know why. Maybe there is something wrong with memory? IDK... but this is extremely frustrating.

Ziaren, Do you have 2 SD cards with your 2 HD2s?
Have you tried with both sd cards on your HD2 that has this trouble?
Just a thought.
Good luck

Ziaren said:
Yep. Im doing EXACLY same thing to the 2 devices. Using the same SD card. First phone is booting and working second is not.
Tried about 5 times (to both of 'em to be sure). I have enough. This just can’t be done. Don’t know why. Maybe there is something wrong with memory? IDK... but this is extremely frustrating.
Click to expand...
Click to collapse
Have you tried to flash your stock ROM, then to re-flash everything? (HSPL, WinMo, MAGLDR and WP7)