Database Users

Alright Man What Gives!

ok so why cant i get android to boot past the htc logo? I have this rom (T-Mobile_HD2_MR_Software_3.14.531.1) with this radio (2.15.50.14) I have hspl3, perform task 29 loaded that rom n radio, put this android build on my reformatted sd card(CMYLXGOs.Droid.BlueTopia.v1.0.4) and it will not load past the htc Logo! What am i missing it has to be something simple i dont get it i have done this b4 but it now wont work!?!?!

ihateu said:
ok so why cant i get android to boot past the htc logo? I have this rom (T-Mobile_HD2_MR_Software_3.14.531.1) with this radio (2.15.50.14) I have hspl3, perform task 29 loaded that rom n radio, put this android build on my reformatted sd card(CMYLXGOs.Droid.BlueTopia.v1.0.4) and it will not load past the htc Logo! What am i missing it has to be something simple i dont get it i have done this b4 but it now wont work!?!?!
Click to expand...
Click to collapse
Try magldr and one of my nand roms and let me know what happens. My guess is its your sdcard.
-CMYLXGO

cmylxgo said:
Try magldr and one of my nand roms and let me know what happens. My guess is its your sdcard.
-CMYLXGO
Click to expand...
Click to collapse
yea i thought it could be the sd card too, but i tried to boot android from a different sd card,no luck. I will read up on how to do a nand rom and hopefully figure it out.

Google "SD Card Formatter" and then use FULL format with ERASE ON.

format
thanks i downloaded a panasonic sd card formater did a full full erase with it checked to "ON" it was reformatted but it said the device does not support Flash Erase.... im gonna try it out now
DUDE U ROCK MAN THAT DID IT THANK U SP MUCH!!!!!!!

[Q] Recovery MOD 1.12 400MB stuck on GO GO GO

Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
What build were you trying?
Sent from my HD2 Droid HD using XDA App

Just redo everything.

hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!

Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App

Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App

walidhazem said:
hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!
Click to expand...
Click to collapse
Format that card in android, or wm

werngrort said:
Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?

brunteboy said:
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?
Click to expand...
Click to collapse
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works

silverwind said:
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works
Click to expand...
Click to collapse
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.

akapaul26 said:
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.
Click to expand...
Click to collapse
No need if you flash via DAF method (just select menu no. 5 USB Flasher while the phone plugged to PC) and run the DAF.exe (Android rom) from your PC.
You will only have to flash RECOVERY partition if you want to flash via ZIP/CWM mode

jalshah05 said:
Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
so you install magldr then you installed CWM and you held down the right button whilst it booted, did it go into the menu?
sounds like you havent installed a rom yet

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
Need to Instal HSPL 2.08 from HSPL installation HSPL upper than that wont work....double check it.....

magdlr problem

hi there
i gave a problem with magdlr
i can not boot from android on sd?
its reboots before it boots up, or it will boot to the NAND rom?
when i choose AD SD..?
any help apriciated

Take a look at the thread for the SD card build you are trying to use to see if there are any special instructions to be able to use it with MAGLDR. I know some of the SD card builds require a different roof.img to be able to boot using MAGLDR. Also look for a readme file in the ROM that might have the needed information you are looking for. For example this quote comes from the American Android SD card build thread.
Includes optional rootfs.img that allows to boot build from magldr (!readme! in /sdcard/Android/SDMAGLDR)
Click to expand...
Click to collapse
Here is a link to the thread.

in mgldr menu go to 'services' then 'boot settings' then 'ad sd dir' then choose the directory of your sd android (which is bootable by mgldr as indicated in the previous post) after that you'll be automatically directed to the mgldr main menu. then choose 'boot ad sd' . booting takes longer than nand roms.

i have all that done
i am not noobish or what. but i dont understand this,
ive flashed wm back. and the sd build would boot up.
then back to magdlr. and the same thing again.. first time its rebooting.. second time it boots the nand rom.?
ive have some apps from my sd build in my nand rom? that is stranger than that all!
rooft img is replaced btw..

if i understand right, when you reboot you want your phone start by the sd build. in sd build thread look at 3 dak's MIUI rom's first post, there is an instruction for that. the second thing, i think is related to sd-ext partition, both sd and nand roms are using it so apps pass from one to the other.

ahh ok
ill try with a SD without an EXT partition..
lets see what happens then

i had putting an sd build @ a nokia 2 gb micro sd.. no ext partition
and i see the NAND bootscreen again ...
what could it be?
roofs.img is replaced, magdlr is correct configured,

a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck

mutil said:
a last recommendation, wipe nand build. first boot sd build from beginning then setup nand build. if it doesn't work it goes beyond me. sorry i couldn't help. i boot two sd builds in mgldr americandroid and 3 dak's MIUI and i haven't these kind of problems. good luck
Click to expand...
Click to collapse
yeck.. again...
ok i'll try..
i let it know if it works or not

blowtje90 said:
yeck.. again...
ok i'll try..
i let it know if it works or not
Click to expand...
Click to collapse
If you want your SD card build to be the default Android you boot with MAGLDR, then from the main menu of MAGLDR go to option #10 Services/0ption #1 Boot Settings/option #1 Boot Source/ option #1 Android from SD. This will tell MAGLDR to boot the SD card build by default.
Sorry I can not be of any more help booting SD Android builds with MAGLDR. I have never done it before so I really have not researched it.

the problem stays....
very strange... i have eerlier running perfectly 2 builds of android on my hd2 ..

If the kernel from sd build is nand kernel like tytung r10 then when you choose ad sd from magldr it will boot into nand build.if you have wm or wp7 into nand,there is no problem
Sent from my Nexus One using Tapatalk

ahh that is the issue.. thnx mate
the SD build i use uses a tytung r10 kernel
now i must search to a another compatible kernel, anyone some suggestions?

Stuck at "reset now...! when installing cwm

Hi,
I ve done my research on the forum and also in the internet and there seems to be little about the problem I have encountered.
Basically Ive used the nand installer toolkit to flash hspl and magldr but as soon as I try to flash cwm the phone does the flashing and then gets stuck when it says "reset now...!"
I have tried clk as well as trying to flash cwm the old way. I also did task29 and tried to revert back to stock winmo6.5 (using LEOIMG method through SD card) but get stuck on HTC logo.
Anyone got any suggestions as to what to try next?

robifis said:
Hi,
I ve done my research on the forum and also in the internet and there seems to be little about the problem I have encountered.
Basically Ive used the nand installer toolkit to flash hspl and magldr but as soon as I try to flash cwm the phone does the flashing and then gets stuck when it says "reset now...!"
I have tried clk as well as trying to flash cwm the old way. I also did task29 and tried to revert back to stock winmo6.5 (using LEOIMG method through SD card) but get stuck on HTC logo.
Anyone got any suggestions as to what to try next?
Click to expand...
Click to collapse
try to download the original 6.5 rom from htc.com and install it through PC. Have you tried this way?

have you tried using HD2 TOOLKIT,can't rate it highly enough

Also you may need to delete all partitions on the SD card reformat it as, Fat 32 primary partition

Go to ad recovery... it might already got installed... even though its stuck
Sent from my LG-P999 using XDA App

Hey
Thanks for the replies.
Ye I've used toolkit but still the same result. I tried the old recovery (through copying files SD card) still don't work.
When I reboot and try ad recovery I get 1E FATAL HIT 1..
Magldr won't install when i have hspl 3.03 at all I have to go back to 2.08 to get it working.
I'm gonna try installing the original rom but I need the virgin rom.
Could I be that I need a gold card even if my device is unlocked?

never mind ..

Bump 10char

Anyone got any solutions? Just wondering if anyone knows how to find out how to check warranty.

[Q] Help with NAND install! USB port broken!!

Well here is the problem:
1. My HD2's usb port is broken!:crying:
2. I am a native SD user, with MAGLDR but no AD Recovery installed whatsoever!
3. I had an Old BoyPPC DHD base sense 2.1 froyo rom on NAND(V23 i guess)(Since USB is dead, i cant flash ANYTHING!)
3. By mistake from 4EXT recovery for sd I did erase all partitions and now there is nothing on my NAND :crying::crying:
4. Now can i flash anything into the NAND space?? I dont know about the partition table of the previous rom or if even it had any!(In AROMA it shows NAND partition 299 mb and 297 mb free thats all i know!!)
5. I tried flashing tytung's 4.2.2 into NAND through 4EXT recovery for SD but i get bootloops!
6. In this scenario is there any rom that i can install on my NAND?ANYTHING!!??
Please guys! Help me with this!!:fingers-crossed::fingers-crossed:

@srinivas2 as your usb is broken, how are you going to recharge the hd2's battery??
i assume you have a charger. moving on
you can download clk (or black clk as i prefer) and flash it via sd card method (rename the nbh file to LEOIMG.nbh). in black clk, you can change system partition size right from inside of it. link for download: http://www.mediafire.com/?nhyausx0p5whu#tzg7whl9wwaih
go to compiled test versions, and download one of the latest. preferably the one with Ex-TWRP. you unzip it, get nbh file, rename to LEOIMG.nbh (in capital letters, yes) aND PUT IT ON ROOT OF SD CARD (sd should be fat32 formatted and have a maximum size of 4gb)
clk thread for instructions: http://forum.xda-developers.com/showthread.php?t=1114053
Caution: NEVER FLASH STOCK WINDOWS MOBILE rom with your usb port broken, as you'll be stuck on it forever(or until you fix usb port) since flashing stock wm rom overrides hspl
now you have black clk installed. inside of it go to settings (of, to go to black clk menu, hold back button just after you turn the hd2 on), resize partitions, system, choose your size and apply.
goto recovery.
in ex-twrp recovery, make an ext4 partition on your sd (most probably you already have one). after downloading rom you want and changing system size in clk to the one mentionned in rom thread, flash rom in ex-twrp.
Done

gilbert32 said:
@srinivas2 as your usb is broken, how are you going to recharge the hd2's battery??
i assume you have a charger. moving on
you can download clk (or black clk as i prefer) and flash it via sd card method (rename the nbh file to LEOIMG.nbh). in black clk, you can change system partition size right from inside of it. link for download: http://www.mediafire.com/?nhyausx0p5whu#tzg7whl9wwaih
go to compiled test versions, and download one of the latest. preferably the one with Ex-TWRP. you unzip it, get nbh file, rename to LEOIMG.nbh (in capital letters, yes) aND PUT IT ON ROOT OF SD CARD (sd should be fat32 formatted and have a maximum size of 4gb)
clk thread for instructions: http://forum.xda-developers.com/showthread.php?t=1114053
Caution: NEVER FLASH STOCK WINDOWS MOBILE rom with your usb port broken, as you'll be stuck on it forever(or until you fix usb port) since flashing stock wm rom overrides hspl
now you have black clk installed. inside of it go to settings (of, to go to black clk menu, hold back button just after you turn the hd2 on), resize partitions, system, choose your size and apply.
goto recovery.
in ex-twrp recovery, make an ext4 partition on your sd (most probably you already have one). after downloading rom you want and changing system size in clk to the one mentionned in rom thread, flash rom in ex-twrp.
Done
Click to expand...
Click to collapse
Thanks for the quick reply @gilbert32 :good:
I got the tracks for power redrawn for the USB port on the MB(Complex procedure but a guy did it for me here in Mumbai ). Now It takes a long time to charge, but roms with fast charge ability(Like tytung NexusHD 4.0.4) does the job best!
Well if i install clk, im gonna loose MAGLDR right?? Cuz i have no experience with clk whatsoever and i am used to MAGLDR. And i have read there have been problems with Native sd methods with clk, thats why i never dared to try it! And once to clk, there is no coming back to MAGLDR as it has no SD card method!
Anyhow currently with the Native sd method im running Nexus HD2 4.0.4! Still Having nothing on NAND is a problem right? Cuz i have weird problems with heating up! When HD2 heats up, it dosent boot from SD, i always have to boot NAND then switch back to SD roms!
And yes, im never gonna do the blunder of flashing the stock WM!

srinivas2 said:
Thanks for the quick reply @gilbert32 :good:
I got the tracks for power redrawn for the USB port on the MB(Complex procedure but a guy did it for me here in Mumbai ). Now It takes a long time to charge, but roms with fast charge ability(Like tytung NexusHD 4.0.4) does the job best!
Well if i install clk, im gonna loose MAGLDR right?? Cuz i have no experience with clk whatsoever and i am used to MAGLDR. And i have read there have been problems with Native sd methods with clk, thats why i never dared to try it! And once to clk, there is no coming back to MAGLDR as it has no SD card method!
Anyhow currently with the Native sd method im running Nexus HD2 4.0.4! Still Having nothing on NAND is a problem right? Cuz i have weird problems with heating up! When HD2 heats up, it dosent boot from SD, i always have to boot NAND then switch back to SD roms!
And yes, im never gonna do the blunder of flashing the stock WM!
Click to expand...
Click to collapse
First of all for thanks smash the thank button like i said in my sig
now regarding installing clk (black clk as i said, with included ex-twrp cz the normal 1.5 clk has no rec afaik), you will loose magldr. right.
and for installing with nativesd, it's very simple (rom should support clk btw, and most do). just in settings in clk, choose add sboot partition. this partition (5mb only) you will use to boot nativesd rom.
after flashing whatever nativesd rom, in ex-twrp (after creating sboot partition) go to advanced, nativesd manager, kernel update. touch sboot in the bottom to make sure it's selected, then choose the rom's folder from nativeSD folder on sd. Very simple.
when you want to boot nativesd not nand, hold the back button to boot to clk and choose boot sboot only. Very simple after you try
regarding installing stock wm, in some cases you may have to. then you will only have nativesd or sd android.
but you can still try custom roms (the have no spl flashing)

hope to help you

thanhhairau said:
hope to help you
Click to expand...
Click to collapse
The whole point of the 10 post rule is to stop people such as yourself posting stuff like this
thanhhairau said:
hurry..! hurry..! I can't wait too.
Click to expand...
Click to collapse
In development forums.

Thread moved.