Database Users

Android bootloop, windows reinstalled now AndroidSD does not work!

Hi, this is a funny situation I'm in because 99% of the time I find solutions to my own problems searching this thread but I'm in a unusual situation and I'm looking for suggestions.
I was running MDJ cynogenmod 7 v.2.2 under CWM and MAGDLR 1.11 with no problem, however because some apps did not work in gingerbread I decided to go back to froyo, which I tried MDJ revolution also on MAGDLR under CWM, and got stuck on a bootloop. I blamed my partitioned (Fat/EXT4) SD card and formatted it (FAT)only and re-flashed REVOLUTION via CWM, still got bootloop so i went over CWM, and flashed it via USB Flasher to be stuck in bootloop again, just before i started crying about my dead HD2 I figured to flash windows 6.5 again and thankfully it worked. But after 5 minutes of using windows I needed android so I downloaded a SD version and tried to run it via Heret, and this is where the situation comes because I already tried many versions of android SD and none bootup. Yea it sounds like my SD but I have already formatted, any suggestions would be appreciated.

ralphsancho said:
Hi, this is a funny situation I'm in because 99% of the time I find solutions to my own problems searching this thread but I'm in a unusual situation and I'm looking for suggestions.
I was running MDJ cynogenmod 7 v.2.2 under CWM and MAGDLR 1.11 with no problem, however because some apps did not work in gingerbread I decided to go back to froyo, which I tried MDJ revolution also on MAGDLR under CWM, and got stuck on a bootloop. I blamed my partitioned (Fat/EXT4) SD card and formatted it (FAT)only and re-flashed REVOLUTION via CWM, still got bootloop so i went over CWM, and flashed it via USB Flasher to be stuck in bootloop again, just before i started crying about my dead HD2 I figured to flash windows 6.5 again and thankfully it worked. But after 5 minutes of using windows I needed android so I downloaded a SD version and tried to run it via Heret, and this is where the situation comes because I already tried many versions of android SD and none bootup. Yea it sounds like my SD but I have already formatted, any suggestions would be appreciated.
Click to expand...
Click to collapse
this might sound a bit daft but have you checked the radio version after flashing the winmo rom?

despy1989 said:
this might sound a bit daft but have you checked the radio version after flashing the winmo rom?
Click to expand...
Click to collapse
yes i have the same radio i always had 2.10.50.26

Just wondering, did you have the correct partition size for system?

Use "SD Card Formatter" and set it to FULL and ERASE ON.

thank you!
thanks for your quick help
after running windows for one day I decided to give MAGDLR another try and just like that it worked perfectly and flashed a very old MDJ Revolution build. it seems that after I formatted SD to FAT only I stupidly tried to flash a APP2SD nand build, which [i think] caused the problem [idk if this was it but my guess is that ap2sd builds only work if you have a [FAT]/[EXT] formatted SD Card (i thought it was kind of optional)]
as for running android via SD, no luck via windows, no luck via MAGDLR, but I have it via nand so I am very very happy
Thread closed

[Q] Troubles with HD2 - Typhoon ROM 3.3.3

Hi,
I have troubles with my HTC HD2.
Im trying to install this version
http://forum.xda-developers.com/showthread.php?t=933951
(25.May.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.3.3[2.3.4][A2SD][tytung r10]
This is my installation step by step.. So...
- Install HSPL 2.08
- Task29
- Radio
- Magldr 1.13
- CWM (3.0.2.5) 150MB
-partition SD Card 1024 and 0
-ext-sd format
- installation of the ROM
- fix permissions
- reboot
And my Android stuck at GO GO GO screen. I dont know what I have done badly, because if I use CWM 3.2.0.0 Android boots nicely, but I hear RoboVoice when I try to call. On the other hand if I try to install the old version of Android via CWM 3.0.2.5 everythink works. I mean the same version of Android but 3.0.6. - no RoboVoice, no bugs with falling applications.
I want to have updated system, but it is impossible for me and I dont know why.
So what is the problem?
thank you
Some details:
SD Card Kingston 8GB class 4
Windows 7 64-bit

maybe this will help ?
http://forum.xda-developers.com/showthread.php?t=945427

Yes, thank you.
But I think the problem is somewhere else. I really keep tutorials and manuals. The problem must be at version of Android. One big different between new and old version is AD Recovery CWM. For old it is for example 135MB, for new version it is 150MB. So I use 150MB as they write at thier thread and it is still not working.
If I use 3.2.0.0, Android(3.3.3) boots, but with bugs.. RoboVoice and so on..
If I use 3.0.2.5, Android freezes at GO GO GO.

Hey,double-confirm if u ain't flashing a CLK build as MAGLDR?
Try using this CWM flasher...it contains version 3.0.2.8...All u have to do is connect phone 2 pc in usb flasher mode (MAGLDR), run the setup.exe as admin, select 150MB partition, flash away...
Alternatively u can just copy out the recovery-raw.img file out and use it 2 replace the recovery-raw.img in the official 3.0.2.5 folder which was recommended in the ROM thread and flash away...
P.S. Try both methods first (performing a task29 each time) and if it still doesn't help then its best to seek help in the ROM's thread...Get help from its users.

MAGLDR of course
Ill try CWM 3.0.2.8. Thank You

99TheDude99 said:
Yes, thank you.
But I think the problem is somewhere else. I really keep tutorials and manuals. The problem must be at version of Android. One big different between new and old version is AD Recovery CWM. For old it is for example 135MB, for new version it is 150MB. So I use 150MB as they write at thier thread and it is still not working.
If I use 3.2.0.0, Android(3.3.3) boots, but with bugs.. RoboVoice and so on..
If I use 3.0.2.5, Android freezes at GO GO GO.
Click to expand...
Click to collapse
First of all are you using cLK or MGLDR?
For robo voice, it is only on the first call, just reboot, call anyone or any number and just hit end call.
If you have GO GO GO screen, you are using MGLDR, so why are you repartitioning your ROM? The MGLDR, already comes with its own partition built in, no need to change anything.

Im using MAGLDR, not cLK.
Ill try your tips, so wait for my report
And what about falling applications?
I click on Internet application or Facebook app. Maybe 3 seconds it works then falls to Home Screen. Thank You

I have used CWM 3028. The problem with RoboVoice is resolved.
However, I have troubles with applications. Internet, Facebook etc.... still falling when I click on them. But at version 3.0.6 everthing works OK.
I dont know why ..
I tried everything

Installing MDJs_CyanogenMod7_v2.6_NAND but need help! ease!

Hi, with no success installing Hyperdroid I decided to install this ROM:
MDJs_CyanogenMod7_v2.6_NAND_A2SD+CWM.zip
Installed:
Radio - 2.15.50.14
HARDSPL - 2.08
Magldr - v1.11
CWM Rec - v3.0.0.5
I took Hyperdroid off by doing a task 29 and re-installing everything again along with the new ROM (above).
On restarting the device, the blue Android comes up but the phone doesn't go any further. I've left it for up to half hour and still nothing. Tried resetting several times and still the same thing.
What am I doing wrong ??
Also, is there a way to easily remove a previous ROM without having to taks 29?
Thanks

I don't know about MDJ's ROM's , but they are pretty much old.
I assume your problems are being derived from not using the proper partition size.
Installing CWM is not enough, you need the proper partition as well.

As far as I know MDJ never made and CWM builds; I recommend going with Typhoon CM7 NAND... way better than MDJ - and there is no issues as with MDJ not willing to provide the source of his ROM (in other words - it may do whatever and however and be unsafe from the financial perspective - you never can find out).

Thanks guys, I'll try Typhoon CM7 NAND.
Is the HTC HD2 supported as I've been on the CyanogenMod weblog and it isn't listed?
If not which can I use.

gurdevb said:
Thanks guys, I'll try Typhoon CM7 NAND.
Is the HTC HD2 supported as I've been on the CyanogenMod weblog and it isn't listed?
If not which can I use.
Click to expand...
Click to collapse
...Is that a serious question?
Typhoon CM7 NAND is CM7 and think about your question... is the HD2 an Android device in the first place? No.

HA HA so it is!
How can I get past the bootup screen - it is frozen on the htc logo in green.
I've tried flashing it again and nothing.
What is the recommended partition for this as this is the only thing I can think that I'm doing wrong?

go here http://forum.xda-developers.com/showthread.php?t=898913 download the 150mb partition if you're going to be using typhoon cm7 ( which is a fast, stable rom) and flash rom as usual in recovery. If you experiment with a bunch of different roms i would suggest downloading the HD2 Toolkit

You can also try Dorimanx Rom, which is also based on CM7.

try new rom like hyperdroid or typhoon, they good

[Q] Problems installing several different Nands - help please

I have successfully installed TyphooN_CM7_v2.9.2-cLK about 8 motnhs ago & been using it but fancied a change.
I am lucky enough to have two HD2's so decide to try installing another nand on the other phone.
I tried TyphooN_CM7_v3.7.0-cLK & DFT_LEO_NAND_Android both using Task 29 & using CWM with CM7 & the USB flasher (as per instructions on the page) for the DFT one. No luck with either they both install but I get an error "Process system is not repsonding" which won't go away with the DFT one & its just keeps booting into Magldr with the CM7. I have installed NexusHD2-Gingerbread_V2.9_NAND_(Android-2.3.5) which is working & installed fine but just can't get either of the other two to work.
I wanted the CM7 to upgrade the current Typhoon I have a wanted a Desire nand on the other phone as a change.
Any ideas what I'm doing wrong?
Help much appreciated
Thanks
Edit:
Following this thread for the CM7 http://forum.xda-developers.com/showthread.php?t=933951
& this for the Desire nand http://forum.xda-developers.com/showthread.php?t=893620

Till now you are used nand android ... so you have the important things (HSPL2.08, radio 2.15.50.14, MAGLDR).
And you installed NexusHD2-Gingerbread ... this means that everything is OK.
I think you can try to download the other things for CM 3.7.0 again.
I've had problems with installing when the .zip is corrupted or something ...

With the typhoon version I would check to make sure that you downloaded the magldr version and not the clk version as it is the magldr that you keep booting into. If you try installing clk to a magldr loader it will not load and just go into magldr loader. With dft one it is probably a bad download or perhaps it is that the rom is an older rom.

There is a lot solutions/problems. Which rom u try to install? Magdlr or clk?
Sent from my HTC HD2 using Tapatalk

Same here
I have exactly the same problem, the only zip NANDs i can install are NexusHD2-Gingerbread. All others install ok but when i reboot it states "Kernal Open Failed" If i install other NANDS via USB flasher they seem to install fine, but then i no longer have AD Recovery Clockworkmod, which is very useful for backups. I appreciate that this is an additional statement but i also have the issue of my phone rebooting 6-10 times a day, hence wanting to change my NAND for testing. I have today however made a complete re-install and using a different SD card, still can't load other ZIP NAND's though.

Shall I change rom? Or what?

Hi,
Some time ago, i have installed via NAND on my HD2 CyanogenMod-7-08312011-NIGHTLY-Desire[TyphooN-v3.6.2-MAGLDR].
Last two weeks I have some problems.
I used to have a problem with sms messages-forced pin everytime i tried to read a message. I deleted all my messages and now it seems like working good.
Since last Monday I cannot enter gallery. It gives me a black screen. I tried everything.
So I thought to change Rom. Is it a good idea? I am very happy with the Rom I have but now that behaves like that maybe it'sbetter to change to a better & newer rom. But which one?
Thanx in advance.

just install a fresh rom like a Hyperdroid or cm9 roms. rember to start clean with task29.

if u like this rom - try wipe dalvik-cache.
if it dosnt help - flash a new rom.

try to instal NAND android because it is stable than the SD android it tried the SD versions but my mobile always hange up but with NAND NO PROBLEMS
try this rom i use it
http://forum.xda-developers.com/showthread.php?t=733649