Related
Hi,
i write from Italy, sorry for my poor english.
I have a SGS I-9000 black screen of deep.
Let me explain what I did to break it.
At first, the 3-key combination worked.
By Odin JS5 I installed.
Then I installed One Click Lag Fix and Superuser Permission 2.2.2 to root permissions.
I installed everything and everything was working with a benckmark 2200.
Then I wanted to install a new ROM but I needed the kernel Speedmod.
To apply the kernel I downloaded SGS kernel flasher 1.5.9 from the Market, I copied speedmod-kernel-k13a-500hz.tar in my sd-card and I started the procedure to install the kernel.
The procedure has done its job, but when the cell is restarted did not want to leave and the 3-key combination no longer worked.
At this point I've got a USB dongle that contains the phone in download mode.
With Odin (1.0,1.3,1.7) can terminate any process of flash but everything stops at reboot the screen with the S and then turn off everything and all the keys are locked.
i tried:
Eclair JM9 with
Re-Partition ok, s1_odin_20100512.pit, CODE_I9000XWJM9.tar.md5, MODEM_I9000XXJM4.tar.md5, CSC_I9000OXAJM1.tar.md5:
SGS black screen
Eclair JM8 with
Re-Partition ok, s1_odin_20100512.pit, CODE_I9000XWJM8.tar.md5, MODEM_I9000XXJM4.tar.md5, CSC_I9000OXAJM1.tar.md5:
SGS black screen
Froyo JP5
no Re-Partition, s1_odin_20100803.pit, CODE_I9000RSJP5.tar.md5, MODEM_I9000XXJPP.tar.md5, CSC_I9000ITVJP3.tar.md5:
la procedura è andata a buon fine, ma il cell si blocca.
in PDA PSbl_stockJPU.tar.md5 for bootloader, but nothing.
How can i recover my SGS?
Thanks,
Max from Pisa
jpc repartition should work again
Sent from my A101IT using Tapatalk
Thanks.
The ROM JPC has enabled the Recovery Mode so I could have done a general reset and the phone is finally broken.
Grazie.
fra Little said:
Thanks.
The ROM JPC has enabled the Recovery Mode so I could have done a general reset and the phone is finally broken.
Grazie.
Click to expand...
Click to collapse
it is broken?
or is it working now?
Sent from my Galaxy S using Tapatalk
Hello, while I was testing 2.3.5 witch was great except that the mobile network was not woorking at all. So I decided that I needed too downgrade. And when I was browsing the phone I accidentally found this way.
This has not been proofed by anyone else I think.
Disclaimer: I do not take the resposibility for your device.
1. Put the dload on the root of SD-card (I used 138sp4)
2. Then go to storage in preferences. Head too the bottom then choose "upgrade SD-card". The phone blacked out, started up and installed 2.2
3. The phone boots up in recovery because of many errors. I choose wipe data/chache and wipe chache and reboot.
4. The phone rebooted and I am back to 2.2.2 from 2.3.5.
This method keeps the start-boot-picture (does not know if the other sulutions keeps it).
Sorry for my bad grammar on some of the words. I just wrote them down and did not have the time to fix them.
Hmmm...interesting....maybe I should try 2.3.5 even if I have the Atmel screen. :/
Sent from my IDEOS X5 using XDA App
UnknownAX said:
Hmmm...interesting....maybe I should try 2.3.5 even if I have the Atmel screen. :/
Sent from my IDEOS X5 using XDA App
Click to expand...
Click to collapse
I have atmel screen but I like it because i wear gloves and the screen is so sensitive that it responds thrugh them.
I was forced to downgrade from 3.2.5 to 2.2.2 for the exacly same reason and i tryied that same way you did and i couldnt do it, i got a message saying something like "there are no upgrade firmware inside the SD card". So i used the root & replace boot and recovery files to downgrade what was a sucess. Got the same issues as you with the boot but the "wipe data/chache" from recovery resolved it.
jopamasi said:
I was forced to downgrade from 3.2.5 to 2.2.2 for the exacly same reason and i tryied that same way you did and i couldnt do it, i got a message saying something like "there are no upgrade firmware inside the SD card". So i used the root & replace boot and recovery files to downgrade what was a sucess. Got the same issues as you with the boot but the "wipe data/chache" from recovery resolved it.
Click to expand...
Click to collapse
Ok, maybe it does not work for everyone but what 2.2 version did you use. For exampe I used the 138sp4(international (the last(I think) 2.2.2 from Huawei))
areedw said:
Ok, maybe it does not work for everyone but what 2.2 version did you use. For exampe I used the 138sp4(international (the last(I think) 2.2.2 from Huawei))
Click to expand...
Click to collapse
The version i used was/is U8800V100R001C00B138SP04, so as far i can see it's the same as yours correct me if i'm wrong. But as far i could read about good/bad reports for 3.2.5 and all the different problems different people having version and same phones making me belive what's possible for one's arent for others.
areedw said:
I have atmel screen but I like it because i wear gloves and the screen is so sensitive that it responds thrugh them.
Click to expand...
Click to collapse
THROUGH gloves? Omg xD
Sent from my IDEOS X5 using XDA App
that's very good!! thanks for info!
downgrade issue
hi, y just tried to upgrade my u8800 to 2.3 using the update from huawei but since the gps and de wifi didnt work I tried to downgrade back to 2.2, I dont really know if what I did was the right thing to do but I just copied the 2.2 dload folder to my sd card and tried to reinstall by presing the vol+vol-power keys and it seemed to work just fine, after it completed I just started the phone and it never woke up again it just vibrates a bit but nothing....does anyone know how can i fix it??it wont let me do anything the computer wont recognice it and there is no image at all....anyone please help me!!!
fermon797 said:
I just started the phone and it never woke up again it just vibrates a bit but nothing....does anyone know how can i fix it??it wont let me do anything the computer wont recognice it and there is no image at all....anyone please help me!!!
Click to expand...
Click to collapse
The decision to distort the battery. Insert, connect the USB to the phone (on the other end connected to a computer), press and hold keys + - food, and wait a few seconds, as soon as you see a red flashing light, unplug the data cable, you can start sewn.
Tnks!!
Igory0k said:
The decision to distort the battery. Insert, connect the USB to the phone (on the other end connected to a computer), press and hold keys + - food, and wait a few seconds, as soon as you see a red flashing light, unplug the data cable, you can start sewn.
Click to expand...
Click to collapse
Tnks!! im gonna try that but after doing that what should i do?? do i have to install 2.2 again??if so do i have to do this procedure with the sd card connected?? and also which rom would you recommend?? thank you so much for your answer!!!
fermon797 said:
Tnks!! im gonna try that but after doing that what should i do?? do i have to install 2.2 again??if so do i have to do this procedure with the sd card connected?? and also which rom would you recommend?? thank you so much for your answer!!!
Click to expand...
Click to collapse
Downgrade from 2.3.5 back to 2.2.2
U8800 V100R001C00B138SP04 (Overseas General) Android 2.2.2 from here
areedw said:
Hello, while I was testing 2.3.5 witch was great except that the mobile network was not woorking at all. So I decided that I needed too downgrade. And when I was browsing the phone I accidentally found this way.
This has not been proofed by anyone else I think.
Disclaimer: I do not take the resposibility for your device.
1. Put the dload on the root of SD-card (I used 138sp4)
2. Then go to storage in preferences. Head too the bottom then choose "upgrade SD-card". The phone blacked out, started up and installed 2.2
3. The phone boots up in recovery because of many errors. I choose wipe data/chache and wipe chache and reboot.
4. The phone rebooted and I am back to 2.2.2 from 2.3.5.
This method keeps the start-boot-picture (does not know if the other sulutions keeps it).
Sorry for my bad grammar on some of the words. I just wrote them down and did not have the time to fix them.
Click to expand...
Click to collapse
Yes its working great but if u have custom rom installed remember to factory reset, wipe cache and dalvik in recovery before downgrade, if u will not do this phone will stay at unpacking screen forever.
Plz help me, everything I did its the same.. Every Android I install for SD, with first CLRCAD than HARET, it collapsed after first reboot, and go back to Win.
But I tried NAND installation, with HD2ToolKit, and after install MAGLDR nothing happens.. plz help... Yes, I am noob
I bought this phone after I saw it on my friend, and I saw MIUI rom, and it was brilliant HELP
mario.barac said:
it collapsed after first reboot, and go back to Win.
Click to expand...
Click to collapse
thats what is supposed to happen with sd card android, , , everytime you reboot, you are back in winmo until you run clcad and haret again.
mario.barac said:
...
But I tried NAND installation, with HD2ToolKit, and after install MAGLDR nothing happens.. plz help... Yes, I am noob
I bought this phone after I saw it on my friend, and I saw MIUI rom, and it was brilliant HELP
Click to expand...
Click to collapse
After magldr, you should install Recovery (ClockWorkMod Recovery for memory repartition like 5/125/5 or else, according to desired ROM), you should find it in the first posts to each and very NAND ROM thread.
After that you can install your ROM from microSD card through CWM Recovery...
Read a little more and you should do this with ease!
Hajde zdravo!
bib*oops said:
After magldr, you should install Recovery (ClockWorkMod Recovery for memory repartition like 5/125/5 or else, according to desired ROM), you should find it in the first posts to each and very NAND ROM thread.
After that you can install your ROM from microSD card through CWM Recovery...
Read a little more and you should do this with ease!
Hajde zdravo!
Click to expand...
Click to collapse
Hvala, nadam se da cu nesto uspjeti
mario.barac said:
Hvala, nadam se da cu nesto uspjeti
Click to expand...
Click to collapse
Nije bas tako komplikovano...
Ako imas vise problemi, samo da mi kazes!
It's not so complicated!
Lots of people having problems to install Official Firmwares .
So i decide to make a guide according my way .
NOTE
Don't blame on me if something goes wrong , it's YOUR choise to do these modifications ...
THINGS YOU'LL NEED
1. A micro sd card
2. A card reader
3. A laptop or pc
4. Battery charged over 70%
UPDATE FROM FROYO TO GINGERBREAD
LET'S START
1. Turn off the phone , and enter pink screen holding vol+ , vol- and power.
2. Change the recovery.img with the stock recovery.img for your baseband ( if you are on froyo , you must put froyo's stock recovery.img , if you're on GB put stock GB recovery.img , etc .. )
If you're with custom rom and you allready rename your stock recovery.img to "recovery_bak.img" or "recovery_backup.img" or anything else , then just delete the CWM recovery ( 5.0.2.7 ) , and rename stock recovery , to "recovery.img" .
3. Remove battery and insert it again after some seconds.
4. Connect your sd card with card reader and make a "dload" folder
5. Inside "dload" folder , paste the step1 ( UPDATE.APP ) , and paste also step 2 by renaming it to ( UPDATE_g.APP ) .... rename it exactly as you see it.
6. Put sd card in the phone
7. Hold , vol+ vol- and power , until phone vibrates .
8. The first step will finish almost immediately
9. Remove battery and insert it again after some seconds
10. Then , HOLD ONLY THE POWER ON BUTTON , until phone vibrates .
11. After 3 seconds , phone will start to install step 2 , it needs almost 5-7 minutes to finish.
12. Remove battery and remove sd card also
13. Put sd card in the card reader and delete the contents of "dload" folder
14. Now paste step 3 ( UPDATE.APP ) into "dload" folder.
15. Insert battery and sd card .
16. Hold vol+ vol- and power until phone vibrates
17. Step 3 will finish in some seconds
18. Remove battery and sd card
19. Put sd card into card reader and delete "dload" folder
20. Insert battery and sd
21. Hold power on until phone vibrates and wait phone to boot.
TO DOWNGRADE FROM ICS TO GINGERBREAD.
GUIDE FOR DOWNGRADE FROM ICS (404029 baseband) , TO GB (404020 baseband).
First of all you must be sure that you have imei and baseband.
So, you must firstly flash a jb or ics based rom, like icedroid ( http://forum.xda-developers.com/show....php?t=2240898 ) , or any other jb rom, just to have your baseband and your imei back.
NOTE THAT YOU MUST HAVE IMEI AND BASEBAND (404029) , TO PROCEED WITH DOWNGRADE
After you're ok with imei and baseband, then you can follow the procedure for downgrade.
if your imei is zero , or your baseband unknown , you cannot proceed with downgrade.
Before you do anything, first of all you must take a backup of your imei.
Download 5iromtoolbox apk, from Pika's thread ... http://forum.xda-developers.com/show...php?p=24668935 ... and make a backup of your imei.
After that you can follow the procedure below to downgrade from ics to gb.
For example, if you're with icedroid rom , then ...
1. turn of the phone and remove sd card
2. i suggest to use an empty sd card 2gb for downgrade (flash official GB )
3. Connect your sd card with card reader on your pc and create a "dload" folder
4. Inside "dload" folder , paste the step2 ( UPDATE_g.APP ) , and rename it to ( UPDATE.APP ) .. download Official GB here .. http://www.mediafire.com/?7dyy01dzy68ns94
5. disconnect card reader and , Put sd card in the phone
6. Hold , vol+ vol- and power , until phone vibrates .After 3 seconds , phone will start to install step 2 , it needs almost 5-7 minutes to finish.( alternatively you can do this without battery , by holding the 3 buttons compo and insert usb cable until phone vibrates).
7. after installation completes , pull out battery and sd card
8. delete 'dload" folder from sd card and insert it to phone again
9. hold power on until phone vibrates
10. wait phone to boot on official GB
DONE
This is MY way on flashing official firmwares , i did it more than 7 times and having NO problems , everytime the installation will finished without a single problem.
When i was using cwm recovery 5.0.2.7 i was having problems but when i use the stock recovery then everything went fine .
OFFICIAL IMAGE FOLDERS AND STOCK RECOVERIES.
Download , Froyo and GB , Stock recoveries
http://www.mediafire.com/?owq6o7yboclmagg
Extract the "Stock recoveries.zip" , and you'll see the folders.
Download stock Froyo and GB image folders
http://www.mediafire.com/download.php?b3qkwulqemswxfq
Extract the "Froyo_GB_image_foders.zip" , and you'll see the folders
Download . stock ICS image folder
http://www.mediafire.com/download.php?89716wlkd7f668x
Extract the "stockICSimage.zip" , and you'll see the folder.
Hope this guide help all users ....
Sent from my U8800 Pro using xda premium
Thx.
The previous recovery I had on my phone was the 3e, is it ok if I use that one? I don't know if it is the stock recovery tho, I'm not the first owner of this phone. I buyed it long ago to someone else and it came with Stock GB ROM, not with Froyo.
I hope this works for me! I'll test it right away. Thanks for sharing!
metallforest said:
The previous recovery I had on my phone was the 3e, is it ok if I use that one? I don't know if it is the stock recovery tho, I'm not the first owner of this phone. I buyed it long ago to someone else and it came with Stock GB ROM, not with Froyo.
I hope this works for me! I'll test it right away. Thanks for sharing!
Click to expand...
Click to collapse
I can upload , froyo and gb stock recoveries ...
You better wait until upload them.
Edit
First post updated , download the .zip ....
Sent from my U8800Pro using xda premium
gkalenis said:
I can upload , froyo and gb stock recoveries ...
You better wait until upload them.
Edit
First post updated , download the .zip ....
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
What is the reason for renaming the step 2 update.app ? Which step flashes update_g.app? Can you also upload links to official stock roms besides the huaweidevice pages?
Well i've tried with stock GB recovery and didn't work. it get stuck on step one and says "Update Failed" also the led start blinking in red. And after first time removing the battery and starting by pressing the ON button only the system starts normally (Kalo's extreme starts in my case like nothing happened)
Step two never starts! Am I missing something?
I almost forgot to mention that inside the dload folder theres a new file called: sd_update.log
it says this: Failure: OSBL°æ±¾¼ì²éʧ°Ü. dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Now I've tried this solution and my phone got F·/$!"ed up... only a blue screen is all I see.
http://forum.xda-developers.com/showthread.php?p=37971111#post37971111
metallforest said:
Well i've tried with stock GB recovery and didn't work. it get stuck on step one and says "Update Failed" also the led start blinking in red. And after first time removing the battery and starting by pressing the ON button only the system starts normally (Kalo's extreme starts in my case like nothing happened)
Step two never starts! Am I missing something?
I almost forgot to mention that inside the dload folder theres a new file called: sd_update.log
it says this: Failure: OSBL°æ±¾¼ì²éʧ°Ü. dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Now I've tried this solution and my phone got F·/$!"ed up... only a blue screen is all I see.
http://forum.xda-developers.com/showthread.php?p=37971111#post37971111
Click to expand...
Click to collapse
Never format boot ...
You delete the contents of image folder.
Get in pink screen , and put the files inside image folder again.
Hope you have a backup of image folder on your pc .
edit
here the stock image folders ( froyo and GB ) ... http://www.mediafire.com/download.php?b3qkwulqemswxfq
Sent from my U8800Pro using xda premium
gkalenis said:
Never format boot ...
You delete the contents of image folder.
Get in pink screen , and put the files inside image folder again.
Hope you have a backup of image folder on your pc .
edit
here the stock image folders ( froyo and GB ) ... http://www.mediafire.com/download.php?b3qkwulqemswxfq
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
Much apreciated dude! But it didn't work. Yes, I did a backup of my image folder but it didn't work either. So I did a complete reinstalation of Froyo through Roadkill's Disk Image and it worked! xD Now i can install updates without any trouble at all..
metallforest said:
Much apreciated dude! But it didn't work. Yes, I did a backup of my image folder but it didn't work either. So I did a complete reinstalation of Froyo through Roadkill's Disk Image and it worked! xD Now i can install updates without any trouble at all..
Click to expand...
Click to collapse
Sorry dude but this is for U8800 pro ..
You have a U8800-51 and you want to flash official firmware for U8800pro ...
I don't know if the procedure is the same ..
You have to tell that you have an U8800-51 , so users can help you ... i cannot help properly cause i have a Pro ..
Use guides to flash roms for U8800-51 , it will be more helpfull for you ..
Sent from my U8800Pro using xda premium
please give steps unlock boot screen fo b928pls.for installing custom rom
Sent from my U8800Pro using xda premium
Gajanana said:
please give steps unlock boot screen fo b928pls.for installing custom rom
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
For unlocking pink screen to ics , there is allready a thread about it.
This guide is for upgrading - downgrading procedures ..
Have a look at threads and you'll find it ....
Sent from my U8800Pro using xda premium
gkalenis said:
Sorry dude but this is for U8800 pro ..
You have a U8800-51 and you want to flash official firmware for U8800pro ...
I don't know if the procedure is the same ..
You have to tell that you have an U8800-51 , so users can help you ... i cannot help properly cause i have a Pro ..
Use guides to flash roms for U8800-51 , it will be more helpfull for you ..
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
Well actually I was thinking that u8800-51 was the same as pro, i've had this phone for like 2 months and its my first android device. I've learned so much on this forums so i must say I'm really thankful for all the help you and everyone on XDA have provided me, I wish everyone who helped me could read this.:good:
metallforest said:
Well actually I was thinking that u8800-51 was the same as pro, i've had this phone for like 2 months and its my first android device. I've learned so much on this forums so i must say I'm really thankful for all the help you and everyone on XDA have provided me, I wish everyone who helped me could read this.:good:
Click to expand...
Click to collapse
is U8800-51 still available for buying?
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
---------- Post added at 06:26 PM ---------- Previous post was at 06:22 PM ----------
gkalenis said:
....
..
.
.
..
5. Inside "dload" folder , paste the step1 ( UPDATE.APP ) , and paste also step 2 by renaming it to ( UPDATE_g.APP ) .... rename it exactly as you see it.
..
.
.
..
10. Then , HOLD ONLY THE POWER ON BUTTON , until phone vibrates .
11. After 3 seconds , phone will start to install step 2 ....
..
.
.
Sent from my U8800 Pro using xda premium
Click to expand...
Click to collapse
How did u come to know all this??
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
prakharkmr27 said:
How did u come to know all this??
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
Click to expand...
Click to collapse
This was the reason i bought my second U8800 pro ...
To make tests on everything , not only roms ...
So , after a lot of flashing official firmwares , i found that this is the easiest method to flash official roms , never had a single problem when i follow this procedure .
Numpers 5 and 10 , and changing recovery to stock is the differences and works like a charm for me.
Sent from my U8800Pro using xda premium
gkalenis said:
This was the reason i bought my second U8800 pro ...
To make tests on everything , not only roms ...
So , after a lot of flashing official firmwares , i found that this is the easiest method to flash official roms , never had a single problem when i follow this procedure .
Numpers 5 and 10 , and changing recovery to stock is the differences and works like a charm for me.
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
that's okay, but who told u about "update_g" thing?
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
prakharkmr27 said:
that's okay, but who told u about "update_g" thing?
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
Click to expand...
Click to collapse
This is known over a year ..
I read it in a thread by matteo ....
Sent from my U8800Pro using xda premium
My device has some dust under glass and I am considering to take it to service.
Which rom I should install as official? Froyo, gb? And where I can download them?
BTW I am now on 4.2.2 so my way to official Froyo would be to get official GB first? but for it what recovery or image should I use? Will gingerbread version fit?
yrxe said:
My device has some dust under glass and I am considering to take it to service.
Which rom I should install as official? Froyo, gb? And where I can download them?
BTW I am now on 4.2.2 so my way to official Froyo would be to get official GB first? but for it what recovery or image should I use? Will gingerbread version fit?
Click to expand...
Click to collapse
me too.. dust particles in top right hand part of screen..
latest official gingerbread will do
www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDYzODc=
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
prakharkmr27 said:
me too.. dust particles in top right hand part of screen..
latest official gingerbread will do
www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDYzODc=
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
Click to expand...
Click to collapse
Sorry for stupid question but is it enought just install in a simple way? Without restoring recovery or image files?
Sent from my GT-I8160 using Tapatalk 2
I always do it with stock recovery ..
With cwm recovery , i was having problems ..
You need only stock ics recovery.img
I don't have it , if someone else can upload it somewhere ??
Sent from my U8800Pro using xda premium
Now I managed to get to official GB and it has bug for gsm connection. I keep getting out of reach.
I checked tutorial how to return to froyo (gkalenis tutorial) but it is for custom. how can I go back to froyo official from GB official?
I am having troubles for weeks and still cant do anything
. I can only go into android recovery, can wipe data and then after 2-3 restart, huawei x5 boots. Then if i restart, there are a lot of windows appear showing stop activities. Even i cant click restart button.
So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. Before it wa s failing.
It could make updates. But after updates, again could not start. After loading huawei logo, it restarts and cant go to desktop.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart . How can i change without rooting recovery? And i change recovery, does this help ? I dont know what the problem is.
Please help.
Cursed Chico said:
I am having troubles for weeks and still cant do anything
. I can only go into android recovery, can wipe data and then after 2-3 restart, huawei x5 boots. Then if i restart, there are a lot of windows appear showing stop activities. Even i cant click restart button.
So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. Before it wa s failing.
It could make updates. But after updates, again could not start. After loading huawei logo, it restarts and cant go to desktop.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart . How can i change without rooting recovery? And i change recovery, does this help ? I dont know what the problem is.
Please help.
Click to expand...
Click to collapse
I also don't know what your problem is. Can you upload your logcat to pastebin.com and send the link for the log?
rqmok said:
I also don't know what your problem is. Can you upload your logcat to pastebin.com and send the link for the log?
Click to expand...
Click to collapse
Log of android recovery?
Now i wiped and i am in 2.3.5. 2.6.35.7 kernel and battery seems nice discharging. But i am afraid to restart. IF i restart, it will gain go into desktop but al ot of activites start to show ballons, stop activity.
Cursed Chico said:
Log of android recovery?
Click to expand...
Click to collapse
log of android
rqmok said:
log of android
Click to expand...
Click to collapse
Sorry i seached but i could not find how to see logcat, except dialing *#*#.. to siwtch on.
Should i use a linux computer?
In sd card in dload file, there is a log. Written:
notesdld_file_ptr != -1) !
SD download finished!
Hey. By chance, i dont know how exactly. In android recovery, i made a lot of time wipe data, then took of battery and volume -+ and battery to install step 2 dload. It installed but when i opened, it could not opened. SO i did 2-3 times and i tried to go into pink screen but it tried to install update, so i took battery and i opened after that. Now , the original stock rom is installed. froyo 2.2.1. I dont know how this were installed. But i restarted 3 times and no problem.
So, what i will do is those?
1- Install super user
2- Do root.
3- INstall cwm
That?
(And flash is not working and in file manager, i can only see ext and int sd, not phone memory? BUt in es exploerer, i could see /device.)
And please tell me a good rom to install. MAybe aurora 20 again but how to install, first to 2.3.5 then to aurora then v20?
Aurora ICS
Im having quite frequently restarts when turning on wifi.
Lukish
Cursed Chico said:
Hey. By chance, i dont know how exactly. In android recovery, i made a lot of time wipe data, then took of battery and volume -+ and battery to install step 2 dload. It installed but when i opened, it could not opened. SO i did 2-3 times and i tried to go into pink screen but it tried to install update, so i took battery and i opened after that. Now , the original stock rom is installed. froyo 2.2.1. I dont know how this were installed. But i restarted 3 times and no problem.
So, what i will do is those?
1- Install super user
2- Do root.
3- INstall cwm
That?
(And flash is not working and in file manager, i can only see ext and int sd, not phone memory? BUt in es exploerer, i could see /device.)
And please tell me a good rom to install. MAybe aurora 20 again but how to install, first to 2.3.5 then to aurora then v20?
Click to expand...
Click to collapse
OK. First, you need to upgrade to official 2.3.5. Then, use this guide: http://forum.xda-developers.com/showthread.php?t=1420728
Please follow the guide properly. It is very useful.
lukish_bochi said:
Im having quite frequently restarts when turning on wifi.
Lukish
Click to expand...
Click to collapse
Yeah. That's one of the problems with Aurora.
I installed 5.0.2.8 cwm, is it latest?
And first i did superuser and root. BEcause i am afraid of again having restart prbolems if i go to 2.3.5.
I have this file
U8800_Android 2.3 V100R001C00B526G001(Normal)
It has step 1 dload.
and that
U8800 V100R001C00B136SP05CUSTC75D001(Portugal TMN)
this has step 2 dload.
In your guide i couldnot see.ARe those true for me?
****. I installed step 1 update, it tried to restart but again it went into loop . And it aumatically went into android recovery. Where cwm is, i dont know.
Now i will go back to 2.2.1, i will try. I am very boreed of this.
Hi!
Did you try B517 from this thread: http://forum.xda-developers.com/showthread.php?t=2166353
Look under official gingerbread and you can try B517 or B518.
I tried all 2.3.5 gingerbreads but after updating, it keeps restarting and automatically go into recovery and wipe data and then opens 2.2.1 . I dont know what to do.
i tried to install those you sent. All gingerbreads after updating, started to restart and went into recovery. I dont know what to do. Froyo is ok, no restart. Maybe imei or something was damageD?
No. It could be that your phone is u8800-51, but I am not sure. I don't know how to check this; it might be under the battery, or you might know how to find out on the internet.
now after wpiping data, it installs 2.3.5 . No more 2.2.1. I dont understand sometimes it resets to 2.2.1, sometimes to 2.3.5
I looked under batter, u8800.
And also i was using 2.3.5before. After i came back from aurora, this s h it started. I install cwm but still deletes it.
Cursed Chico said:
now after wpiping data, it installs 2.3.5 . No more 2.2.1. I dont understand sometimes it resets to 2.2.1, sometimes to 2.3.5
I looked under batter, u8800.
And also i was using 2.3.5before. After i came back from aurora, this s h it started. I install cwm but still deletes it.
Click to expand...
Click to collapse
So, are you on 2.3.5 right now? Do you have cwm?
rqmok said:
So, are you on 2.3.5 right now? Do you have cwm?
Click to expand...
Click to collapse
I am on it but after 1 restart, same thing happens, all activities ends. Nothing in it. I cant install cwm because it needs restarts.
When i try to apply update from sd card in android recovery
logs are that
finding update package
opening pdate package
veryifng update package
e:failed to veryfy whole file signature
e:signature verificaton failed
installation aborted