[TUTORIAL]U8800pro , Flash Official Firmwares - Huawei Ideos X5 U8800

Lots of people having problems to install Official Firmwares .
So i decide to make a guide according my way .
NOTE
Don't blame on me if something goes wrong , it's YOUR choise to do these modifications ...
THINGS YOU'LL NEED
1. A micro sd card
2. A card reader
3. A laptop or pc
4. Battery charged over 70%
UPDATE FROM FROYO TO GINGERBREAD
LET'S START
1. Turn off the phone , and enter pink screen holding vol+ , vol- and power.
2. Change the recovery.img with the stock recovery.img for your baseband ( if you are on froyo , you must put froyo's stock recovery.img , if you're on GB put stock GB recovery.img , etc .. )
If you're with custom rom and you allready rename your stock recovery.img to "recovery_bak.img" or "recovery_backup.img" or anything else , then just delete the CWM recovery ( 5.0.2.7 ) , and rename stock recovery , to "recovery.img" .
3. Remove battery and insert it again after some seconds.
4. Connect your sd card with card reader and make a "dload" folder
5. Inside "dload" folder , paste the step1 ( UPDATE.APP ) , and paste also step 2 by renaming it to ( UPDATE_g.APP ) .... rename it exactly as you see it.
6. Put sd card in the phone
7. Hold , vol+ vol- and power , until phone vibrates .
8. The first step will finish almost immediately
9. Remove battery and insert it again after some seconds
10. Then , HOLD ONLY THE POWER ON BUTTON , until phone vibrates .
11. After 3 seconds , phone will start to install step 2 , it needs almost 5-7 minutes to finish.
12. Remove battery and remove sd card also
13. Put sd card in the card reader and delete the contents of "dload" folder
14. Now paste step 3 ( UPDATE.APP ) into "dload" folder.
15. Insert battery and sd card .
16. Hold vol+ vol- and power until phone vibrates
17. Step 3 will finish in some seconds
18. Remove battery and sd card
19. Put sd card into card reader and delete "dload" folder
20. Insert battery and sd
21. Hold power on until phone vibrates and wait phone to boot.
TO DOWNGRADE FROM ICS TO GINGERBREAD.
GUIDE FOR DOWNGRADE FROM ICS (404029 baseband) , TO GB (404020 baseband).
First of all you must be sure that you have imei and baseband.
So, you must firstly flash a jb or ics based rom, like icedroid ( http://forum.xda-developers.com/show....php?t=2240898 ) , or any other jb rom, just to have your baseband and your imei back.
NOTE THAT YOU MUST HAVE IMEI AND BASEBAND (404029) , TO PROCEED WITH DOWNGRADE
After you're ok with imei and baseband, then you can follow the procedure for downgrade.
if your imei is zero , or your baseband unknown , you cannot proceed with downgrade.
Before you do anything, first of all you must take a backup of your imei.
Download 5iromtoolbox apk, from Pika's thread ... http://forum.xda-developers.com/show...php?p=24668935 ... and make a backup of your imei.
After that you can follow the procedure below to downgrade from ics to gb.
For example, if you're with icedroid rom , then ...
1. turn of the phone and remove sd card
2. i suggest to use an empty sd card 2gb for downgrade (flash official GB )
3. Connect your sd card with card reader on your pc and create a "dload" folder
4. Inside "dload" folder , paste the step2 ( UPDATE_g.APP ) , and rename it to ( UPDATE.APP ) .. download Official GB here .. http://www.mediafire.com/?7dyy01dzy68ns94
5. disconnect card reader and , Put sd card in the phone
6. Hold , vol+ vol- and power , until phone vibrates .After 3 seconds , phone will start to install step 2 , it needs almost 5-7 minutes to finish.( alternatively you can do this without battery , by holding the 3 buttons compo and insert usb cable until phone vibrates).
7. after installation completes , pull out battery and sd card
8. delete 'dload" folder from sd card and insert it to phone again
9. hold power on until phone vibrates
10. wait phone to boot on official GB
DONE
This is MY way on flashing official firmwares , i did it more than 7 times and having NO problems , everytime the installation will finished without a single problem.
When i was using cwm recovery 5.0.2.7 i was having problems but when i use the stock recovery then everything went fine .
OFFICIAL IMAGE FOLDERS AND STOCK RECOVERIES.
Download , Froyo and GB , Stock recoveries
http://www.mediafire.com/?owq6o7yboclmagg
Extract the "Stock recoveries.zip" , and you'll see the folders.
Download stock Froyo and GB image folders
http://www.mediafire.com/download.php?b3qkwulqemswxfq
Extract the "Froyo_GB_image_foders.zip" , and you'll see the folders
Download . stock ICS image folder
http://www.mediafire.com/download.php?89716wlkd7f668x
Extract the "stockICSimage.zip" , and you'll see the folder.
Hope this guide help all users ....
Sent from my U8800 Pro using xda premium

Thx.
The previous recovery I had on my phone was the 3e, is it ok if I use that one? I don't know if it is the stock recovery tho, I'm not the first owner of this phone. I buyed it long ago to someone else and it came with Stock GB ROM, not with Froyo.
I hope this works for me! I'll test it right away. Thanks for sharing!

metallforest said:
The previous recovery I had on my phone was the 3e, is it ok if I use that one? I don't know if it is the stock recovery tho, I'm not the first owner of this phone. I buyed it long ago to someone else and it came with Stock GB ROM, not with Froyo.
I hope this works for me! I'll test it right away. Thanks for sharing!
Click to expand...
Click to collapse
I can upload , froyo and gb stock recoveries ...
You better wait until upload them.
Edit
First post updated , download the .zip ....
Sent from my U8800Pro using xda premium

gkalenis said:
I can upload , froyo and gb stock recoveries ...
You better wait until upload them.
Edit
First post updated , download the .zip ....
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
What is the reason for renaming the step 2 update.app ? Which step flashes update_g.app? Can you also upload links to official stock roms besides the huaweidevice pages?

Well i've tried with stock GB recovery and didn't work. it get stuck on step one and says "Update Failed" also the led start blinking in red. And after first time removing the battery and starting by pressing the ON button only the system starts normally (Kalo's extreme starts in my case like nothing happened)
Step two never starts! Am I missing something?
I almost forgot to mention that inside the dload folder theres a new file called: sd_update.log
it says this: Failure: OSBL°æ±¾¼ì²éʧ°Ü. dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Now I've tried this solution and my phone got F·/$!"ed up... only a blue screen is all I see.
http://forum.xda-developers.com/showthread.php?p=37971111#post37971111

metallforest said:
Well i've tried with stock GB recovery and didn't work. it get stuck on step one and says "Update Failed" also the led start blinking in red. And after first time removing the battery and starting by pressing the ON button only the system starts normally (Kalo's extreme starts in my case like nothing happened)
Step two never starts! Am I missing something?
I almost forgot to mention that inside the dload folder theres a new file called: sd_update.log
it says this: Failure: OSBL°æ±¾¼ì²éʧ°Ü. dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Now I've tried this solution and my phone got F·/$!"ed up... only a blue screen is all I see.
http://forum.xda-developers.com/showthread.php?p=37971111#post37971111
Click to expand...
Click to collapse
Never format boot ...
You delete the contents of image folder.
Get in pink screen , and put the files inside image folder again.
Hope you have a backup of image folder on your pc .
edit
here the stock image folders ( froyo and GB ) ... http://www.mediafire.com/download.php?b3qkwulqemswxfq
Sent from my U8800Pro using xda premium

gkalenis said:
Never format boot ...
You delete the contents of image folder.
Get in pink screen , and put the files inside image folder again.
Hope you have a backup of image folder on your pc .
edit
here the stock image folders ( froyo and GB ) ... http://www.mediafire.com/download.php?b3qkwulqemswxfq
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
Much apreciated dude! But it didn't work. Yes, I did a backup of my image folder but it didn't work either. So I did a complete reinstalation of Froyo through Roadkill's Disk Image and it worked! xD Now i can install updates without any trouble at all..

metallforest said:
Much apreciated dude! But it didn't work. Yes, I did a backup of my image folder but it didn't work either. So I did a complete reinstalation of Froyo through Roadkill's Disk Image and it worked! xD Now i can install updates without any trouble at all..
Click to expand...
Click to collapse
Sorry dude but this is for U8800 pro ..
You have a U8800-51 and you want to flash official firmware for U8800pro ...
I don't know if the procedure is the same ..
You have to tell that you have an U8800-51 , so users can help you ... i cannot help properly cause i have a Pro ..
Use guides to flash roms for U8800-51 , it will be more helpfull for you ..
Sent from my U8800Pro using xda premium

please give steps unlock boot screen fo b928pls.for installing custom rom
Sent from my U8800Pro using xda premium

Gajanana said:
please give steps unlock boot screen fo b928pls.for installing custom rom
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
For unlocking pink screen to ics , there is allready a thread about it.
This guide is for upgrading - downgrading procedures ..
Have a look at threads and you'll find it ....
Sent from my U8800Pro using xda premium

gkalenis said:
Sorry dude but this is for U8800 pro ..
You have a U8800-51 and you want to flash official firmware for U8800pro ...
I don't know if the procedure is the same ..
You have to tell that you have an U8800-51 , so users can help you ... i cannot help properly cause i have a Pro ..
Use guides to flash roms for U8800-51 , it will be more helpfull for you ..
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
Well actually I was thinking that u8800-51 was the same as pro, i've had this phone for like 2 months and its my first android device. I've learned so much on this forums so i must say I'm really thankful for all the help you and everyone on XDA have provided me, I wish everyone who helped me could read this.:good:

metallforest said:
Well actually I was thinking that u8800-51 was the same as pro, i've had this phone for like 2 months and its my first android device. I've learned so much on this forums so i must say I'm really thankful for all the help you and everyone on XDA have provided me, I wish everyone who helped me could read this.:good:
Click to expand...
Click to collapse
is U8800-51 still available for buying?
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
---------- Post added at 06:26 PM ---------- Previous post was at 06:22 PM ----------
gkalenis said:
....
..
.
.
..
5. Inside "dload" folder , paste the step1 ( UPDATE.APP ) , and paste also step 2 by renaming it to ( UPDATE_g.APP ) .... rename it exactly as you see it.
..
.
.
..
10. Then , HOLD ONLY THE POWER ON BUTTON , until phone vibrates .
11. After 3 seconds , phone will start to install step 2 ....
..
.
.
Sent from my U8800 Pro using xda premium
Click to expand...
Click to collapse
How did u come to know all this??
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]

prakharkmr27 said:
How did u come to know all this??
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
Click to expand...
Click to collapse
This was the reason i bought my second U8800 pro ...
To make tests on everything , not only roms ...
So , after a lot of flashing official firmwares , i found that this is the easiest method to flash official roms , never had a single problem when i follow this procedure .
Numpers 5 and 10 , and changing recovery to stock is the differences and works like a charm for me.
Sent from my U8800Pro using xda premium

gkalenis said:
This was the reason i bought my second U8800 pro ...
To make tests on everything , not only roms ...
So , after a lot of flashing official firmwares , i found that this is the easiest method to flash official roms , never had a single problem when i follow this procedure .
Numpers 5 and 10 , and changing recovery to stock is the differences and works like a charm for me.
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
that's okay, but who told u about "update_g" thing?
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]

prakharkmr27 said:
that's okay, but who told u about "update_g" thing?
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
Click to expand...
Click to collapse
This is known over a year ..
I read it in a thread by matteo ....
Sent from my U8800Pro using xda premium

My device has some dust under glass and I am considering to take it to service.
Which rom I should install as official? Froyo, gb? And where I can download them?
BTW I am now on 4.2.2 so my way to official Froyo would be to get official GB first? but for it what recovery or image should I use? Will gingerbread version fit?

yrxe said:
My device has some dust under glass and I am considering to take it to service.
Which rom I should install as official? Froyo, gb? And where I can download them?
BTW I am now on 4.2.2 so my way to official Froyo would be to get official GB first? but for it what recovery or image should I use? Will gingerbread version fit?
Click to expand...
Click to collapse
me too.. dust particles in top right hand part of screen..
latest official gingerbread will do
www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDYzODc=
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]

prakharkmr27 said:
me too.. dust particles in top right hand part of screen..
latest official gingerbread will do
www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDYzODc=
Straight from my U8800PRO..
Respect: qiwu
Current ROM: ShenDu OS-121227-DEV [Android 4.1.2 (JB)]
Click to expand...
Click to collapse
Sorry for stupid question but is it enought just install in a simple way? Without restoring recovery or image files?
Sent from my GT-I8160 using Tapatalk 2

I always do it with stock recovery ..
With cwm recovery , i was having problems ..
You need only stock ics recovery.img
I don't have it , if someone else can upload it somewhere ??
Sent from my U8800Pro using xda premium

Now I managed to get to official GB and it has bug for gsm connection. I keep getting out of reach.
I checked tutorial how to return to froyo (gkalenis tutorial) but it is for custom. how can I go back to froyo official from GB official?

Related

How to fix RANDOM REBOOTS / BOOTLOOPS

**UPDATED**
If you experience RANDOM reboots across different ROMS, and KERNELs, you've come to the right place!! You can solve this issue using the steps described below.
Apparently this is caused by some misconfiguration. Something went terribly wrong and is owning your phone randomdly... So we have to go back to stock and run the phone once to solve any issues.
(I spend a lot of time trollin' devs and other users to give me further info about it, but it ended out being a problem of my phone.) :S
So, to solve this, you'll need to flash 2 things using flashtool:
1- stock 2.1.1.A.0.6 ROM,
2- baseband: 2.1.1.A.0.6 BASEBAND 15 (IMPORTANT: choose the correct one (e15i or e15a) depending on your hardware!!!, check the label below your battery or you'll get F!-up)
download here (thanks lucastan96 for this link)
Note: The following procedure will not RE-LOCK the loader, so relax!
8 steps to glory: follow the order or you'll get served.
1. turn off the phone and format your SD card elsewhere
2. flash stock ROM
3. flash the baseband
4. turn on the phone and go through the setup once
5. turn off the phone and format the SD card elsewhere
6. copy the ROM you wish to install in your SD card
7. flash a CWM kernel and install the ROM (.zip) (make a factory reset before installing!!)
7.1. (optional) if you choose a stock rom kernel, turn off the phone and flash THE BASEBAND
8. turn on the phone and enjoy.
regards
Facepalm* this is stock ROM...i need a fix for MiniCM 3.0.0
Sent from my E15i using xda premium
ElmirBuljubasic said:
Facepalm* this is stock ROM...i need a fix for MiniCM 3.0.0
Sent from my E15i using xda premium
Click to expand...
Click to collapse
You didn't understand, seems to me.
You have to do all this steps in order to make your phone alright and after that you can flash any ROM you wish and your random reboot problem should be solved.
ElmirBuljubasic said:
Facepalm* this is stock ROM...i need a fix for MiniCM 3.0.0
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Facepalm* You didn't read the instructions correctly.
First you flash everything stock; hopefully fixing the random reboots and then:
"7. copy the ROM you wish to install in your SD card"
in your case; MiniCM 3.0.0
---
Top Tip:
*Next time, try not to be so rash and avoid embarrassment.
Mhhh ... I did everything! But it did not work
I also have problem with random reboots on minicm7 (purple LED and then reset).
Anyone can confirm if it works?
@slake84: Almost 100% sure that's a Custom Kernel BUG.
This thread is for those having RANDOM REBOOTS/crashes using different ROMS AND KERNELS.
Thanks mate, it works :good:
Nton'S said:
Thanks mate, it works :good:
Click to expand...
Click to collapse
Sorry after almost two days without random reboot today the problem come back again, any other solution please?

[Q] Blue Screen

Hello. I am scared. Saw pink screen. Blue screen is only coming while I try to boot. When I plug it with PC one drive comes nothing inside it. Will I be able to use my phone ever again? I think by mistake I wiped my Mobile drive. Can anyone save me? please guide.
Moderators. Sorry for starting this thread. I could not find solution for U8800 in other threads.
get the bootloader files and put them in ur phone when in pink mode..
u have to state what ur phone model and rom version are so that somebody may be able to provide u with the right files..
thx
iamelton said:
get the bootloader files and put them in ur phone when in pink mode..
u have to state what ur phone model and rom version are so that somebody may be able to provide u with the right files..
Click to expand...
Click to collapse
Thanks for the help. But I don't know what exactly you said. Can you please upload All bootloader files in a zip. My model is Huawei Ideos X5 U8800. Please help. I am really stuck and scared. for ROM version.. That is where I got stuck I was installing CM7 and by mistake I formatted everything. So do idea which ROM to write here. And I do not know the folder structure so please upload entire thing in zip or do guide me . thanks in advance
there are U8800, U8800H, U8800-51, U8800 Pro/+, and may be more..
and there are android 2.2 and 2.3 stock roms..
every combination of them has a different set of bootloader files, so giving u a wrong set of files will not help at all..
u got to get this info first before someone can help u..
maybe at least u can tell where u got the phone, any info printed on the box, etc..
iamelton said:
there are U8800, U8800H, U8800-51, U8800 Pro/+, and may be more..
and there are android 2.2 and 2.3 stock roms..
every combination of them has a different set of bootloader files, so giving u a wrong set of files will not help at all..
u got to get this info first before someone can help u..
maybe at least u can tell where u got the phone, any info printed on the box, etc..
Click to expand...
Click to collapse
I have U8800 I have bought from India. It was having 2.2.1 and was trying to update on 2.3.7 CM. Is this information sufficient? please help
You formatted everything?
NEVER format boot. I suggest you reflash firmware.
Sent from my U8800 using Tapatalk 2
Qqqxxxzzz said:
You formatted everything?
NEVER format boot. I suggest you reflash firmware.
Sent from my U8800 using Tapatalk 2
Click to expand...
Click to collapse
How to do that? any help for that?
i think thats enough..
unfortunately i just have a backup of stock 2.3 rom's bootloader files, and my phone is U8800H..
well wait for somebody to come up then..
cr723 said:
Hello. I am scared. Saw pink screen. Blue screen is only coming while I try to boot. When I plug it with PC one drive comes nothing inside it. Will I be able to use my phone ever again? I think by mistake I wiped my Mobile drive. Can anyone save me? please guide.
Moderators. Sorry for starting this thread. I could not find solution for U8800 in other threads.
Click to expand...
Click to collapse
u have probably deleted ur boot.img from phone's custom folder
there is only one way out
download the file i have provided in the link
extract the rar file using winrar
copy the "dload" folder to ur sdcard (dont put it in any other folder, just paste it in the sdcard)
pull out the battery and put it back
and then while holding volume + key switch on the mobile until it shows update on the screen
note: u need to have other mobile or sdcard reader to put dload folder in ur sdcard.... u cant access r sdcard while being in bluescreen of ur u8800
enjoy
http://server.streznik.org/Stock ROMs/U8800 V100R001C00B138SP04%28Normal%29.rar
Thanks All, finally I am able to solve it. Here is what I did incase in future some1 has same issues.
when I formatted my mobile last time (a year ago), (by mistake) I took backup of stock rom images.
amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
I created a folder called Image and copied all 4 in that folder. Now my Blue screen is converted into Pink one. on my other SD card i put 2.2.1 stock in "dload" folder.
I installed foryo normally by pressing power button and volume keys
I went in pink mode again to copy CWM image.
I went to CWM and installed CM7 (geno) I don't know I tried 10 times to install ezet. It is not at all working with me. anyway But m very happy to be back to CM7 after using ICS MIUI (very much ram hungry).
Thanks everyone for helping me out.
It cant mount sd card, i cant format sd card and now i have blue screen error. By mistake i deleted everything I made a file image and put amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
to in it but still cant oopen phone What will i do?
Cursed Chico said:
It cant mount sd card, i cant format sd card and now i have blue screen error. By mistake i deleted everything I made a file image and put amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
to in it but still cant oopen phone What will i do?
Click to expand...
Click to collapse
Do you have back up of your image folder? if not let me know I will upload mine
cr723 said:
Do you have back up of your image folder? if not let me know I will upload mine
Click to expand...
Click to collapse
No. I lost it. I only have recovery.img and boot.img adn i dont know where to load this. Because i cant mount my internal sd card.
He formatted emmc partition. You can boot to cwm tho. Any got spare pink screen?
Sent from my u8800-51 using xda premium.
cr723 said:
Thanks All, finally I am able to solve it. Here is what I did incase in future some1 has same issues.
when I formatted my mobile last time (a year ago), (by mistake) I took backup of stock rom images.
amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
I created a folder called Image and copied all 4 in that folder. Now my Blue screen is converted into Pink one. on my other SD card i put 2.2.1 stock in "dload" folder.
I installed foryo normally by pressing power button and volume keys
I went in pink mode again to copy CWM image.
I went to CWM and installed CM7 (geno) I don't know I tried 10 times to install ezet. It is not at all working with me. anyway But m very happy to be back to CM7 after using ICS MIUI (very much ram hungry).
Thanks everyone for helping me out.
Click to expand...
Click to collapse
Can you, please, make an archieve with these files and share it with us? I've lost my backups when my PC died some time ago.
Hey please reply
cr723 said:
Thanks All, finally I am able to solve it. Here is what I did incase in future some1 has same issues.
when I formatted my mobile last time (a year ago), (by mistake) I took backup of stock rom images.
amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
I created a folder called Image and copied all 4 in that folder. Now my Blue screen is converted into Pink one. on my other SD card i put 2.2.1 stock in "dload" folder.
I installed foryo normally by pressing power button and volume keys
I went in pink mode again to copy CWM image.
I went to CWM and installed CM7 (geno) I don't know I tried 10 times to install ezet. It is not at all working with me. anyway But m very happy to be back to CM7 after using ICS MIUI (very much ram hungry).
Thanks everyone for helping me out.
Click to expand...
Click to collapse
will you please give me a backup of this files ?
amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
thanks .. coz im experiencing blue screen now
I will upload in a few hours. Wait some time
asterisk017 said:
will you please give me a backup of this files ?
amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
thanks .. coz im experiencing blue screen now
Click to expand...
Click to collapse
http://www68.zippyshare.com/v/67112645/file.html
I have similar issue but can not see the phones storage at all in pink or blue screen, the computer is asking me install drivers for the 'device' when i connect it via usb. I copied dload (official gingerbread) to the external sd card and vol -+ the phone and and the update started to take effect but stopped halfway through 2/2 install. There must be a way to boot/ bring the phone back to life using the external sd card can anyone help me with this?
minor issue as i understand. Try to install 2.2.1 (Foryo).
Are you getting blue screen as of now? or just in boot loop?

Froyo to Gingerbread, update failed

Hi, i tried to update from android 2.2.2 to 2.3.5 but i got a problem... i put the "dload" folder into my 16GB sdcard and press both volym keys while pressing the power button. Its unpacking and everything but when it changes to "installing" i get a message that the "update failed".
How do i fix this?
Things i have tried: Formatted sdcard and put "dload" folder into it
Downloaded an other gingerbread update
Factory reset and then tried update
Start the update from the internal sdcard
Start the update without the battery inserted and USB connected
Please help me!
Dload on root of your sd card. After that you must press both Vol + and - with Power key to boot on Pink Screen.
dark_vader said:
Dload on root of your sd card. After that you must press both Vol + and - with Power key to boot on Pink Screen.
Click to expand...
Click to collapse
Tried it, wont work still "update failed"... i cant understand why it wont work, i even followed a video guide
Had the same issue
from 2.2.1 to 2.2.2 ok but then nothing !!
Problem was my Motherboard of the phone
could go from 2.2.1 up to 2.2.2 and that was it
It even erased my IMEI number
Luckily it was under warranty
So they replaced my motherboard and now all is ok again
Gman2oo6 said:
Had the same issue
from 2.2.1 to 2.2.2 ok but then nothing !!
Problem was my Motherboard of the phone
could go from 2.2.1 up to 2.2.2 and that was it
It even erased my IMEI number
Luckily it was under warranty
So they replaced my motherboard and now all is ok again
Click to expand...
Click to collapse
But i had the phone for 2 days :s can the motherboard be broken already? I dont have any other problems with the phone, just the update
btw, forgot to tell you guys that i have the Pro version
Fillingen90 said:
But i had the phone for 2 days :s can the motherboard be broken already? I dont have any other problems with the phone, just the update
btw, forgot to tell you guys that i have the Pro version
Click to expand...
Click to collapse
I had the same problem. So, I will point 2 things:
1. It may be a slow card. Try to add the dload folder in the internal card.
2. In case you use the B512, you need to put the UPDATE.APP and UPDATE_G.APP in the dload folder at the same time.
s91066 said:
I had the same problem. So, I will point 2 things:
1. It may be a slow card. Try to add the dload folder in the internal card.
2. In case you use the B512, you need to put the UPDATE.APP and UPDATE_G.APP in the dload folder at the same time.
Click to expand...
Click to collapse
i downloaded this rom: http://forum.xda-developers.com/showthread.php?t=1728604 an it seems to work.
The phone says that i got the .35 kernel and android 2.3.7 but it seems like that rom is bad because my Ideos restarts sometimes, gonna find an other one. Got some tips of any good GB rom?
Okay, im using android 4.0.3 atm so if anyone else got the same problem as me, just use CWM to install a custom 2.3.7 rom or do like me: stock 2.2.2 -> custom 2.3.7 rom -> custom 4.0.3 rom ^^
Fillingen90 said:
Okay, im using android 4.0.3 atm so if anyone else got the same problem as me, just use CWM to install a custom 2.3.7 rom or do like me: stock 2.2.2 -> custom 2.3.7 rom -> custom 4.0.3 rom ^^
Click to expand...
Click to collapse
A Custom ROM will always work !!
But you will and cannot upgrade with the Original Releases by HUAWEI
( please check if you still have your IMEI )
I had the same trouble as you did
And if you still have warranty then send it back !!
PS :
I tried fast MicroSD cards and slow 2GB 4GB 8GB and 16GB no luck at all
Internal memory same issues
With Battery or without still no luck
If original update fails while using sdcard try to copy dload folder into internal disk then unmount the sdcard and try to update again.
If your imei isnt nulled %99 it should update.
Btw please consider backing your imei before doing any update with 5iromtoolbox.
Sent from my U8800
Gman2oo6 said:
A Custom ROM will always work !!
But you will and cannot upgrade with the Original Releases by HUAWEI
( please check if you still have your IMEI )
I had the same trouble as you did
And if you still have warranty then send it back !!
PS :
I tried fast MicroSD cards and slow 2GB 4GB 8GB and 16GB no luck at all
Internal memory same issues
With Battery or without still no luck
Click to expand...
Click to collapse
how can i check if my IMEI is intact?
Fillingen90 said:
how can i check if my IMEI is intact?
Click to expand...
Click to collapse
dial *#06#
kilroystyx said:
dial *#06#
Click to expand...
Click to collapse
it was intact
There is a log file in dload. What does it say?
The error message that I am getting is:
dload_sd_chk_ram_data failed!
Anyone know what that means?
eyeconic said:
There is a log file in dload. What does it say?
The error message that I am getting is:
dload_sd_chk_ram_data failed!
Anyone know what that means?
Click to expand...
Click to collapse
in dload i only have update.app but no log file... :s
That may be a good thing. U8800, U8800Pro or U8800-51? Many have learned the hard way.
eyeconic said:
That may be a good thing. U8800, U8800Pro or U8800-51? Many have learned the hard way.
Click to expand...
Click to collapse
U8800pro that had 2.2.2 instead of usuall 2.2.1 when i bought it
Battery Stats
Fillingen90 said:
i downloaded this rom: http://forum.xda-developers.com/showthread.php?t=1728604 an it seems to work.
The phone says that i got the .35 kernel and android 2.3.7 but it seems like that rom is bad because my Ideos restarts sometimes, gonna find an other one. Got some tips of any good GB rom?
Click to expand...
Click to collapse
In order to stop random reboots you must wipe battery stats then reinstall the zip
Somcom3X said:
In order to stop random reboots you must wipe battery stats then reinstall the zip
Click to expand...
Click to collapse
Worked! Thx alot, for that answer Nice to be able to play dungeon hunter etc without reboots when i play :good:
Whenever i get an update failed, I try internal sd.Always works

Go back toOriginal image 222 from any rom

For anyone that need it
In pink screen delete everything and replase with this
http://www.2shared.com/file/pyo8lRCY/image.html
whatever rom you may have and you like to go back to 222
replase this files to image folder with root explorer (path /cust_backup/image )
and the dload for the original rom ( any Huawei rom ) folder to your sdcard
power of
power on with + - volume key press
your phone install the new firmware.
or just put dload with old firmware and install it. no need to delete nothing.
if you delete recovery.img and your phone battery dies, you won't be able to charge it until you boot phone, but because battery dead -you can't boot
Yea that would instant brick your phone
Sent from my U8800 using xda premium
just put dload folder on sd card and flash it. worked every time from every rom
brdnacer said:
just put dload folder on sd card and flash it. worked every time from every rom
Click to expand...
Click to collapse
Actually, I can't go to .32 CM7 from Aurora that way. But yeah, this way's scary.
nimyea said:
Actually, I can't go to .32 CM7 from Aurora that way. But yeah, this way's scary.
Click to expand...
Click to collapse
are you sure? i was on aurora v5.0 u16 and i just flashed with dload folder ( http://www.mediafire.com/?c97gnolbh9759y7 ) official 2.2, and then .32 cm7
Hei
What i have in my guide is what i have done with my phone and worked.
When i was in aurora and whent back to cm7.
And yes it is true that if you just place the dload file from 222 tosd and reflash with original recovery you will go back to 222
Sent from my GT-N7000 using xda app-developers app

Jellybean or Ice cream sandwich on Ideos S7

Jellybean or Ice cream sandwich on Ideos S7
Here is the step by step guide for the joy (of course for the newbies).
Say thanks to goodoane, asturel, luisrene88, Jota, dzonikg , tri_zet*
and many for this.
1. Go here : http://www.androidtablets.net/forum...ical/15812-rom-tri_zet-ideos_s7-slim-mod.html and download the zip file :S7_trzmod-v3.zip
2. Then go here : http://www.androidtablets.net/forum...recovery-ideos-s7-classic-cmr-v6-0-1-2-a.html and download this recovery image: CM recovery.img
3. Now rename this recovery image to recovery-trzmod3.img and replace that with the image file of same name in S7 trzmod-V3.zip
4. Now unzip it in computer and now you are ready for flashing recovery by running update.cmd.
5. Next visit this page http://www.androidtablets.net/forum...yanogenmod-9-s7-slim-alpha-21.html#post237650 and download the boot images cm9 boot image from http://www.share-byte.net/yJkZ6X and cm10 from http://www.share-byte.net/cQhhFq
6. Then go on to http://www.androidtablets.net/forum...al/45329-rom-cyanogenmod-9-s7-slim-alpha.html and download the latest roms in zip files from the link http://www.asturel.hu/cm9_s7/
7. Now rename the cm9 boot image to just boot.img and replace that with the boot image in cm9rom. Repeat this with the cm10.
8. Also download the latest respective google apps from the links in http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
9. Now copy the roms and gapps zips to your internal sd card
10. Turn on usb debugging and connect ideos to pc. Run the update.cmd in the trzmod v3 folder.
11. First install the adb huawei drivers
12. Then install the recovery ie. The altered ere ics recovery we have replaced initially
13. Reboot to recovery and exit the cmd
14. Disconnect from the pc and do factory reset, wipe cache, wipe dalvik cache in advanced
15. select install zip from sd card and then choose zip from sd card. Choose cm9 or cm10 as you wish
16. you have it.
Whatever happens to your tab is your business. Read this threads in detail about ups and downs of each rom and check on latest boot image kernels.
1. http://www.androidtablets.net/forum...al/45329-rom-cyanogenmod-9-s7-slim-alpha.html
2. http://www.androidtablets.net/forum...l/46180-rom-cyanogenmod-9-s7-105-testing.html
Remember this is a developing subject. Dont spam those threads with noob questions. Above I have explained it in the most simple noob way. There is no other easier way. This is for s7 classic ie. 10X versions. Best wishes
my blog : www.bijopaul.blogspot.com
Solved: How to copy roms and files to "INTERNAL SD CARD" ?
Problem: My device says there is no SD card in it
but i do have it
5. Next visit this page http://www.androidtablets.net/forum/...-alpha-22.html and download the boot images cm9 boot image from http://www.share-byte.net/yJkZ6X and cm10 from http://www.share-byte.net/cQhhFq
Click to expand...
Click to collapse
i cant download them cm9 and 10
just need 9 atm but when i click on download file i get this (after a min or so waiting)
Access denied for user 'root'@'localhost' (using password: NO)
any1 got it and put it on mediafire or something pls
Hello
djaydino said:
i cant download them cm9 and 10
just need 9 atm but when i click on download file i get this (after a min or so waiting)
Access denied for user 'root'@'localhost' (using password: NO)
any1 got it and put it on mediafire or something pls
Click to expand...
Click to collapse
There are so many ROMs there, which one do you want ?
urgent pls
dkharpuri said:
There are so many ROMs there, which one do you want ?
Click to expand...
Click to collapse
i tried everything but in the last updated failed please retry this is the message am getting how to overcome it now
urgent pls
antonieoalan said:
i tried everything but in the last updated failed please retry this is the message am getting how to overcome it now
urgent pls
Click to expand...
Click to collapse
if it is for slim here you go paranoid 2.54 ..its with gapps include so dont need to flash them.
http://www12.zippyshare.com/v/55512286/file.html
Sent from my YP-G70 using xda app-developers app
help out
DZonikg said:
if it is for slim here you go paranoid 2.54 ..its with gapps include so dont need to flash them.
http://www12.zippyshare.com/v/55512286/file.html
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
ok thanks
but i tried again with the same rom mentioned above now it started installing i think how much time it takes its keeping on blinking
antonieoalan said:
ok thanks
but i tried again with the same rom mentioned above now it started installing i think how much time it takes its keeping on blinking
Click to expand...
Click to collapse
you must wipe everything in cwm before install..first boot takes some 10 minutes.
Sent from my YP-G70 using xda app-developers app
DZonikg said:
you must wipe everything in cwm before install..first boot takes some 10 minutes.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
---------- Post added at 09:35 AM ---------- Previous post was at 09:33 AM ----------
antonieoalan said:
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
Click to expand...
Click to collapse
ok nw i got into the recovery mode by luck but not ableto select the option with the help of vol buttons
---------- Post added at 09:38 AM ---------- Previous post was at 09:35 AM ----------
antonieoalan said:
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
---------- Post added at 09:35 AM ---------- Previous post was at 09:33 AM ----------
ok nw i got into the recovery mode by luck but not ableto select the option with the help of vol buttons
Click to expand...
Click to collapse
third time now stuck at ideos screen again have to instal ffrom dload and then start off again frm first
is there any shortcut to overcome this
i successfully instaled it the rom looks good but wifi not working and the phone gets rebooting on and off
so am goin to try the paranoid 2.16 rom now see u good night
antonieoalan said:
i successfully instaled it the rom looks good but wifi not working and the phone gets rebooting on and off
so am goin to try the paranoid 2.16 rom now see u good night
Click to expand...
Click to collapse
i dont like the paranoid angel i like the cm10 version from asturel only but am getting the follwoing errors
1. gets rebboting off frequently
2. sd card not getting detected
3. Wifi not getting enbled even though i used many appliactions from gapps to enable it
4. but the look is awesome
i just need it for the day to day use of this mobile with the jellybean
Ok am back to eclair let me wait for the stable version of jelly ban for this mini device
Sent from my IDEOS S7 using xda app-developers app
hey i did everything you said, my tablet opened up BUT my touchscreen is going crazy! when i touch it doesn't work properly for example i touch in the midle of the screen it showes that i touching in the up left corner of the screen and when i use the pad a mouse (like pc) appears i can't even control my tablet... any suggestion?
IDEOS S7 105
is this working for huwae ideos s7 not the slim one.....am a new bee so please answer my question...T_T
it works on Huawei S7 Slim (S7-202u)
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!
how's it going?
cmallagoli said:
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!
Click to expand...
Click to collapse
I'm glad to see current activity here, as I have an S7 that needs this treatment. Exactly what did you install? Is it all working? Thanks.
Thanks
cmallagoli said:
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!
Click to expand...
Click to collapse
can you tell me the step you do ?
from the first post there is so many application that I need to download. is that true ?
thank you
Hi,
I'm going to be crazy!!
I do all waht you say but when i try to choose Zip from sdcard it say "E:Can't mount /sdcard/" that's all!!!
Impossile to access to my rom.zip!!!
Please Help
Stéph.
can't select option using volume buttons on clockworkmod recovery!
i was doing smoothly following the procedures but i get stuck always on cwm recovery because i cant enter any other option aside from reboot because the touchscreen is not working as well as the volume buttons, only the power button is working...did i did something wrong? or is it because the Ideos S7 slim 201w has no official cwm recovery yet?

Categories

Resources