Database Users

[HOW TO][GSM]10/20 Honeycomb Team - RC1 Flash

**First off, I am not responsible for anything you do from my post that messes your device.**
Screenshots in second post.
Noob questions will be ignored. Ok here we go.
Pre-requisites
1 - Working knowledge of how to flash via Odin (I ain't teaching ya)
2 - sdcard that has the bootloader fix, HC rom and any other needed files on it already (makes last couple of steps faster)
3 - The ROM from here
Instructions
1 - Backup your stuff.
2 - Backup your stuff
3 - Download the needed stuff from the attachments
4 - Download the needed Froyo (yep you read that right) rom to 'restock' the device from here and extract the enclosed tar file
** JJ7 ROM here for those that have reboot issues with the roto JME ROM. **
5 - Start Odin and select the downloaded .pit file for the PIT section and make sure re-partition IS checked
6 - Select the .tar file that your extracted from the Froyo rom download for the PDA section (it has an MD5 extension added to the end, you can remove it)
7 - Attach tab in download mode (power + volume down) and click the start button when Odin is ready and wait (about 3-5 mins)
8 - Allow tab to boot and click through welcome screens (don't worry about connecting to network or account or anything as it wont last) and take a trip down memory lane (mmmm Froyo) ... Done? Good, run the bootloader patch and patch if needed and reboot.
9 - Open Odin again and select the p1000-mck-r3-ext4-cwm.tar file from the attachments and add it to the PDA section, no .pit file this time
10 - Make sure re-partition IS NOT checked and connect your tab (in download mode) and click start and wait (30 secs) and tab will reboot
11 - Reboot will get stuck at bootlogo, power down and reboot into recovery (power + volume up) and the EXT4 conversion should start (you need an sdcard in the external slot) ... wait for it to finish, it will take a while, when done wipe data/cache/dalvik and reboot into Froyo once again and skip through the welcome stuff
12 - Reboot into recovery with the sdcard in the external slot and select "install from sdcard" -> "choose zip" and select the HC beta rom and flash it
13 - Flash a Froyo radio from this thread if you want the 3G working. (JK3 works well with my GT-p1000 from Bell)
14 - Reboot into Honeycomb goodness! Reboot again for good measure.
Have fun!!!
Credits due to the original devs of the files used here, roto, chainfire, [email protected] and anyone I missed. I did not make anything just found the right order to use them.

10/20/2011
Updated for new RC1 and different flashing method
Added radio link for people who want 3g working
10/19/2011
Screenshots added (please note that the dock is from ADW Ex).
10/14/2011
JJ7 download link added
10/12/2011
Initial post

Honeycombe
At step 11 tab doesn´t switch to recovery mode. Please help.thank you,

TroPir said:
At step 11 tab doesn´t switch to recovery mode. Please help.thank you,
Click to expand...
Click to collapse
A little more info would be helpful. Is your tab GSM? What is happening instead?

Yes.when pressing power and volume up,there is after a few seconds a flah of frizzly colours across the screen and it get stuck with the boot logo.Tab can go in download modus,but not in recovery.
Also it doesn´t charge anymore (grey battery symbol).

Are you holding the buttons longer than needed maybe? Let go of both buttons as soon as you see it power on. As for your grey battery, leave your tab plugged into the wall charger for four hours then unplug, reenter download mode and start from scratch. Sounds like either you started to flash with little battery left or the CMW recovery didn't take and need to be reflashed.
Also you didn't specify or put it in your signature but you are using a GT-P1000 right? This si not for any Sprint or Verizon or even a LTAM verison, just ATT/Euro versions of the tab.

I'm kinda itchin to try this out. I've yet to download the roms though.
Just wondering, how's the current HC running on the gtab? (performance, battery-wise)

Can you be more specific ?? Dont undestand how to do nothing
Sent from my GT-P1000 using XDA App

manggagalugad said:
I'm kinda itchin to try this out. I've yet to download the roms though.
Just wondering, how's the current HC running on the gtab? (performance, battery-wise)
Click to expand...
Click to collapse
Battery wise it is fine. Not ready for daily driver use but it is coming.

avenir11 said:
Can you be more specific ?? Dont undestand how to do nothing
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Who are you talking to? Doing nothing is easy, just dont do ****.

slimdizzy said:
Battery wise it is fine. Not ready for daily driver use but it is coming.
Click to expand...
Click to collapse
Hmm sounds worth a try.

manggagalugad said:
Hmm sounds worth a try.
Click to expand...
Click to collapse
IF you just want it to surf the web and play some games then it works fine. Don't expect many apps to work though as the SD card issues will break some apps.

can we have screenshot

photpix said:
can we have screenshot
Click to expand...
Click to collapse
Really? Just like any other honeycomb build really. Nothing special other than its on the 7" screen.

I would like screenshot too
Sent from my Nexus S using XDA App

Keep up the good work guys, fingers crossed.
Sent from my GT-P1000 using XDA App

Originally Posted by avenir11
Can you be more specific ?? Dont undestand how to do nothing
Sent from my GT-P1000 using XDA App
Who are you talking to? Doing nothing is easy, just dont do ****.
Slim,
Loved that post...
Best wishes on getting this working, I too want to try it.

What the password on the JJ7 ROM rar?

kingskidd268 said:
What the password on the JJ7 ROM rar?
Click to expand...
Click to collapse
samfirmware.com

slimdizzy said:
Really? Just like any other honeycomb build really. Nothing special other than its on the 7" screen.
Click to expand...
Click to collapse
Slim,
One thing that is special, is it will let those who want to use Google Body run it.
At this time GB does not run Google Body.
Other then those apps that are HC specific, your right.

[Q] Help: Dell XCD35 India : Automatic restarting, Process System+Google gapps FC

Dear Members,
Hi, I have dell xcd 35 Gen1 2.1
I am new with Mod, Rom etc.
Yesterday with the help xda forum of I have tried to update to gen 2 and By Clockword recovery 5.0.2 i have tried to install Dell Stock rom 2.2 Froyo
after many tries and errors finally i install 2.2
but i have getting message Fc Process system not responding and process com.google.gapps has stopped and FC. and in 3-4 minutes phone getting automatically rebooting.
Now I am also not able to go To clock word recovery by pressing Vol+ and Power.
as i am not able to go in root in starting. it is also showing a big green android logo then dell LOGo and Then FTM Logo.
as dell only give a very restrictive PC software to connect to mobile with No option to install APK.
So Now i can only copy Apk in SD card but can not install any apk.
I dont know now what next as all option look close.
Pls Any One can provide detail solution. pls give me very details solution as only then i can recover as i dont know much about rooting and commands.
Thanks in Advance
Vijay Gupta

You are not able to enter CMW because you flashed a stock rom. When you flash stock rom you will lose the CWM recovery. To fix this install rom.manager and root your phone again because you have lost your root and recovery this will fix your problem
Sent from my Blade using xda premium

First root your device using an app z4root. Get it from your pc and transfer and install using filer. Go for a permanent root. Next,like said above,flash Clockworkmod using the Rom manager app. Download it to your system and copy it over to the sd card and install using filer again. Flash lateat Clockworkmod in Rom manager. After that,to enter clockworkmod,power off your phone and boot with power and vol- pressed. Since you're already Gen2,flash ONLY gen2 roms such as Cyanogenmod or gingerstirfry or swedish snow. And remember before flashing these files,do a Wipe data/factory reset in clockworkmod.
Sent from my Blade using XDA app

First flash a gen 1 to gen 2 tpt then flash any ROM or u will brick it

karthiknr said:
First root your device using an app z4root. Get it from your pc and transfer and install using filer. Go for a permanent root. Next,like said above,flash Clockworkmod using the Rom manager app. Download it to your system and copy it over to the sd card and install using filer again. Flash lateat Clockworkmod in Rom manager. After that,to enter clockworkmod,power off your phone and boot with power and vol- pressed. Since you're already Gen2,flash ONLY gen2 roms such as Cyanogenmod or gingerstirfry or swedish snow. And remember before flashing these files,do a Wipe data/factory reset in clockworkmod.
Sent from my Blade using XDA app
Click to expand...
Click to collapse
first thanks for your kind reply and solution. i have z4root apk on my pc and i can transfer by Sd card but can not use filer application on my phone as as soon as i open my phone it force close process google gapps and i can open nothing on my phone. so i can not install z4root on phone. even if i manage somehow to install my phone is showing no application so how can i use z4root. pls help
tell me anything

Kannibalism said:
You are not able to enter CMW because you flashed a stock rom. When you flash stock rom you will lose the CWM recovery. To fix this install rom.manager and root your phone again because you have lost your root and recovery this will fix your problem
Sent from my Blade using xda premium
Click to expand...
Click to collapse
first thanks for your kind reply
as i mentioned that my phone is not loading anything. as soon as my phone starts it shows me lock screen and as i unlock my phone screen it Force close my phone saying process system and process.com.google.gapps not responding.
and then my phone automatically reboot.
as dell also does not provide apk installation thorough any pc connect software so i can only transfer my apk files through phone Sd card but can not install any apk as my phone does not loading any application. so i can install rom manager and root phone. if any other way to install and root my phone pls tell.

vijay gupta said:
first thanks for your kind reply
as i mentioned that my phone is not loading anything. as soon as my phone starts it shows me lock screen and as i unlock my phone screen it Force close my phone saying process system and process.com.google.gapps not responding.
and then my phone automatically reboot.
as dell also does not provide apk installation thorough any pc connect software so i can only transfer my apk files through phone Sd card but can not install any apk as my phone does not loading any application. so i can install rom manager and root phone. if any other way to install and root my phone pls tell.
Click to expand...
Click to collapse
to root your phone all you need to do is have usb debugging enabled on your phone and download an application from your pc super one click all you have to do is connect your phone via the cable to the pc and click on the root button. This will root your phone from your pc directly.
Once you have root on your phone download rom manager nd install the latest CWM recovery and flash a rom of your choice best not to use stock roms because you will lose root and CWM recovery again

Solved: Thanks Cyanogenmod
I Visited Cyanogenmod For Zte Blade and follow instructions
first install clockwork recovery through fastboot option and then install 7.0.1 version for blade and then i have 2.3.5 android install.
thanks for all who replied and special thanks for Cyanogenmod and XDA developers to make life easy.
Thanks n best regds
Vijay
vijay gupta said:
Dear Members,
Hi, I have dell xcd 35 Gen1 2.1
I am new with Mod, Rom etc.
Yesterday with the help xda forum of I have tried to update to gen 2 and By Clockword recovery 5.0.2 i have tried to install Dell Stock rom 2.2 Froyo
after many tries and errors finally i install 2.2
but i have getting message Fc Process system not responding and process com.google.gapps has stopped and FC. and in 3-4 minutes phone getting automatically rebooting.
Now I am also not able to go To clock word recovery by pressing Vol+ and Power.
as i am not able to go in root in starting. it is also showing a big green android logo then dell LOGo and Then FTM Logo.
as dell only give a very restrictive PC software to connect to mobile with No option to install APK.
So Now i can only copy Apk in SD card but can not install any apk.
I dont know now what next as all option look close.
Pls Any One can provide detail solution. pls give me very details solution as only then i can recover as i dont know much about rooting and commands.
Thanks in Advance
Vijay Gupta
Click to expand...
Click to collapse

vijay gupta said:
I Visited Cyanogenmod For Zte Blade and follow instructions
first install clockwork recovery through fastboot option and then install 7.0.1 version for blade and then i have 2.3.5 android install.
thanks for all who replied and special thanks for Cyanogenmod and XDA developers to make life easy.
Thanks n best regds
Vijay
Click to expand...
Click to collapse
its nice to see you solved the problem mate. As a side note i would recommend staying away from stock roms because once you install a stock rom you will lose root and clockwork mod recovery. Using a custom rom will not delete your root and recovery.

thanks
Kannibalism said:
its nice to see you solved the problem mate. As a side note i would recommend staying away from stock roms because once you install a stock rom you will lose root and clockwork mod recovery. Using a custom rom will not delete your root and recovery.
Click to expand...
Click to collapse
Yes, In future i will only install custom roms. Actually when two days ago i attempted to update zte blade i did not know what is stock rom custom rom tpt gen all that. i just read at this website and decided to do. thank god i also have a Desire HD so i backed all data on my desire and then rooted Blade. but things goes
wrong and only by further reading and understanding i able to not only solve the problem and also updated blade and as well desire Hd.
thanks for your kind reply
Take care
Vijay

no problem mate if you need any help in the future send a PM my way if you want to

possibility of adding as friend just like FB
Kannibalism said:
no problem mate if you need any help in the future send a PM my way if you want to
Click to expand...
Click to collapse
Ok i will if i need any help. Also is it a good idea/ any possibility for this website owner to start a new feature among members to add them as friend just like Facebook. so that it is easier to connect each other as this website also have so many users so if you are not a regular visitor then it is very hard to remember each members id to pm then.
it is just a idea/request only.
cheers mate

vijay gupta said:
Ok i will if i need any help. Also is it a good idea/ any possibility for this website owner to start a new feature among members to add them as friend just like Facebook. so that it is easier to connect each other as this website also have so many users so if you are not a regular visitor then it is very hard to remember each members id to pm then.
it is just a idea/request only.
cheers mate
Click to expand...
Click to collapse
You can already do this. Click on his name, then click "View Public Profile". Once you are there, click the "Befriend Kannibalism" button under the "Friends" tab.

thanks
Amphoras said:
You can already do this. Click on his name, then click "View Public Profile". Once you are there, click the "Befriend Kannibalism" button under the "Friends" tab.
Click to expand...
Click to collapse
Thanks for info.
Now You are already on my friend List

hi frnds, i have a dell xcd35,
whenever i press vol-up+power+home, i get these options:-
1)reboot system now
2)apply sdcard:update.zip
3)wipe data/factory reset
4)wipe cache partition
Now i have installed the ics rom and i dont see the play store, filer and some other files....
Is this because i didn't install gapps??
If yes, then how to install gapps?
Need a quick solution. Thanks

Abhayblues said:
hi frnds, i have a dell xcd35,
whenever i press vol-up+power+home, i get these options:-
1)reboot system now
2)apply sdcard:update.zip
3)wipe data/factory reset
4)wipe cache partition
Now i have installed the ics rom and i dont see the play store, filer and some other files....
Is this because i didn't install gapps??
If yes, then how to install gapps?
Need a quick solution. Thanks
Click to expand...
Click to collapse
Hi
This is called clockworkmod recovery. It's used to flash (install) ROMs, tweaks, mods and Google Apps
Download any ICS GApps package (it'll usually be in the same thread you downloaded the ROM from)
Then place this GApps zip in your SD card. In recovery mode, select install zip from SD card, and then choose the zip you just downloaded
Sent from my Nexus⁴
Check out SpecCheck - Compare Devices Side By Side

[Q] Stuck at boot looping {HELP}

i have samsung galaxy tab 7.7 3g, and it somehow rebooted and stuck at boot looping, so i installed CWM and tried a bunch of ROMs and still every single ROM boot loops.. plz help i have some important data i need on the phone... any help ?? Thanks

try to wipe data from cwm...

In recovery try to wipe cache and dalvik.
NOT data...and see how it go

nothing .. i wiped dalvik and cache and still looping... is there an RUU that can restore it to factory setting but somehow manage to save the data ??

Flash again using odin after you get into download mode

liqn7 said:
Flash again using odin after you get into download mode
Click to expand...
Click to collapse
how ... i got into odin mode.. by pressing power+ volume down he said download or cancel, so i pressed download and it said downloading... from where he did not ask me to join any wifi network or anything ?? can u guide me through please ?

Arobase40 said:
Once you flash a ROM, whichever it is, you have to be very patient and don't panic...
Unplug it from your PC, plug it on the main... and wait !!!
That happened to me, and I can tell you this can take awhile before you get back to your main display...
May depend on the numbers of apps or how much space left on the eMMC or the micro SDCard ???
:silly: :fingers-crossed:
Click to expand...
Click to collapse
i actually dont really know what "plug it on the main" means
but i flashed a new rom from CWM and still stuck on Samsung Galaxy tab logo and i think the device is overheating right now from the left side of the screen. is that normal ?
Question: i did not delete/restore factory settings i just erased the dalvik and cache.. would that be a problem ?

for the sake of helping you... can you tell us... what firmware were you from before you flash a new one??? honeycomb??? ics??? and which custom firmware did you flash...

This happened to me as well, this weekend. Absolutely stock Tab 7.7, never flashed, and it suddenly rebooted while I was using it and got stuck on the "Galaxy Tab 7.7" bootup screen, and no amount of factory resetting would help.
I managed to fix it by following this guide:
http://forum.xda-developers.com/showpost.php?p=25487137&postcount=22
Basically, the /data partition was corrupted, and had to be repaired with e2fsck through an adb shell.

Let battery go flat.

I only try to help you. Don't blame me if this doesn't works for you. Based on my experience, this is step-by-step guide you could try to flash a new ROM for your device.
1. Install Samsung Kies on a PC or notebook
2. Download PC Odin3 v.1.85
3. Download Stock Android 3.2 HC ROM
4. Open PC Odin
5. Click on PDA and search for your downloaded file (which MUST have been extracted into .tar.md5 format earlier)
6. Connect your device to the PC and wait until the PC finished installing your device ADB driver
7. Click Start to begin flashing your device for the Stock ROM
ps: Sometimes Device get stuck or boot looping. But, after wiping data and chace in stock recovery its became normal again. Revived.
Good luck!
---------- Post added at 05:37 PM ---------- Previous post was at 05:13 PM ----------
Also, you may follow this thread to find out more..
http://forum.xda-developers.com/showthread.php?t=1871289

marwanxx said:
I only try to help you. Don't blame me if this doesn't works for you. Based on my experience, this is step-by-step guide you could try to flash a new ROM for your device.
1. Install Samsung Kies on a PC or notebook
2. Download PC Odin3 v.1.85
3. Download Stock Android 3.2 HC ROM
4. Open PC Odin
5. Click on PDA and search for your downloaded file (which MUST have been extracted into .tar.md5 format earlier)
6. Connect your device to the PC and wait until the PC finished installing your device ADB driver
7. Click Start to begin flashing your device for the Stock ROM
ps: Sometimes Device get stuck or boot looping. But, after wiping data and chace in stock recovery its became normal again. Revived.
Good luck!
---------- Post added at 05:37 PM ---------- Previous post was at 05:13 PM ----------
Also, you may follow this thread to find out more..
http://forum.xda-developers.com/showthread.php?t=1871289
Click to expand...
Click to collapse
Hello I tried to do everything here but my tab asks me to enter a password to start and I never put any password. I tried to flash ics but nothing happened. Please help
Sent from my GT-P6800 using XDA Premium HD app

alitaw said:
Hello I tried to do everything here but my tab asks me to enter a password to start and I never put any password. I tried to flash ics but nothing happened. Please help
Sent from my GT-P6800 using XDA Premium HD app
Click to expand...
Click to collapse
After you've done flashing, your device is asking for password. That could be happen if you didn't flash with the right firmware or flashing isn't completed successfuly. Try to download your original stick ROM and flash again then if your device still asking for the password, enter the recovery mode, wipe data, chacek dalvik chace and reboot.
Or, else you need to send your device to Samsung.
Thanks.

[Q] Completely Bricked Nexus 7

Okay I'm a noob when it comes to flashing and all this custom rom stuff. I wanted to flash a tablet ui rom from this website
at wonderhowto.com
They said I needed to be at 4.2.2 and so I checked my tablet's settings and it stated that I was at 4.2. Being the noob that I am I thought 4.2 was the same as 4.2.2 (not knowing it was 4.2.0) so I flashed it anyway using WugFresh's Nexus tool kit and it immediately got bricked at the google x screen. So after some research and a few downloaded files later, I found the stock 4.2 nexus 3G zip. So I did a stock recovery with that and everything was restored. Yay! I still wanted that tablet UI so the next step was to update to 4.2.2. I was able to upgrade to 4.2.2 using the nexus system update check in the About Tablet settings. Now that I had the 4.2.2, I flashed the Tablet UI patch to my device and it worked fine. Device booted up with the tablet UI and everything but the landscape mode was a little buggy. So, I decided to go back to the stock rom in which he provided in his blog under "Restoring Back to Stock UI". I downloaded that to my device and installed using the TWRP. Now this is where the problem started. When I booted up my device it got stuck on the google X screen. So I rebooted the device over and over again and the same problem persisted. I went to Wugfresh's toolkit and decided to stock recover using the original nakasig J0P40C 4.2.0 build and now the device won't turn on, stays stuck on the Google logo screen, and no matter how many times I stock recover it just stays in the Google logo screen.
- I've completely wiped the cache and formated the data, sd card through the TWRP. I'm able to reach the TWRP using WugFresh's tool kit under "temporary custom recovery".
- Not sure but I have a feeling that it's not working because I'm essentially downgrading from 4.2.2 to 4.2.0. If this is the case how can I get a stock 4.2.2
- Please any help is wanted. My device is my life right now.

Can you get into bootloader mode?
If so:
Get your restore image from here:https://developers.google.com/android/nexus/images
In wugfresh' toolkit select 'soft brick / boot loop' at device state, under the flash stock button.
Connect your Nexus to your PC and get it into bootloader mode.
Click the flash stock button.
Select the option to choose your own image and click the original one from Google.
Now flash and hope it's booting again!
If not so:
Sorry, I can't help you :-[
Sent from my Nexus 7 using xda premium

It's kinda common problem. The reason is not your downgreading. I't something else. As you are using NRT(one of my fev) you are too close to the solve. Heres the steps you need to take.
* Reboot into bootloader,
- Advance->reboot recovery in NRT
- or if you don't wanna use NRT turn off your device(hold the power button for about 10sec) now hold the power and volume down butto untill the google logo shows up
- than you should be in the fastboot mode
* Now click Flash Stock + Unroot in NRT(Can't boot up) go through the process(I'd recomment 4.2.2 stock)
* You got your devece into 4.2.2stock
If you wanna get a custom rom with Tablet UI you can skip the uper part.
* Reboot your device in TWRP
* Get an USB flash drive with the custom ROM( Smooth ROM is my personal fev.
* Connect the USB flast to your tablet via a OTG cable.
* Select install from TWRP select USB otg (or something like that)
* Now Select the custom rom from the Files and Swipe to install.
* Go through the installation process.
* After the installation is done wipe cach & devlock.
* Turn off the device from TWRP.(Sometimes direct rebooting form TWRP causes a problem).
* Power it on and you got a custom rom that has an Tablet UI.
* As far as I remember Smooth ROM is previously rooted. Though I rooted it using NRT(4.2.2 stock worked for me).
* As you are using a custom rom you should use a custom recovery.
Hope this is gonna work let me know if doesn't.
_____________________________________________
Don't just say thank you there is a button for thanking.
---------- Post added at 02:33 PM ---------- Previous post was at 02:26 PM ----------
sdelange99 said:
Can you get into bootloader mode?
If so:
Get your restore image from here:https://developers.google.com/android/nexus/images
In wugfresh' toolkit select 'soft brick / boot loop' at device state, under the flash stock button.
Connect your Nexus to your PC and get it into bootloader mode.
Click the flash stock button.
Select the option to choose your own image and click the original one from Google.
Now flash and hope it's booting again!
If not so:
Sorry, I can't help you :-[
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
That is supposed to be wokring. But I never could get the "Other/Brows" working in NRT. Think this is a bug.
---------- Post added at 02:36 PM ---------- Previous post was at 02:33 PM ----------
And @slimsoul I think this is not a situation which can be called as "Completely Bricked Nexus 7"

Can't you click the flash button, choose other / browse in the upper section and choose "I downloaded one mysef..." in the lower section?
Otherwise just try installing if you ever need it.

sdelange99 said:
Can't you click the flash button, choose other / browse in the upper section and choose "I downloaded one mysef..." in the lower section?
Otherwise just try installing if you ever need it.
Click to expand...
Click to collapse
I know how that works. but may be ther is a bug. The flash is never complete. Did you tried to read the lines on the console?? It just jump to press any key to continue. There was suppoed to be many steps before it. And the process was supposed to take a little more time. And the result is no change to your device at all.
Please try to Quote when you post about another post, or it get untressable.
-----------------------------------------------------------------------------
Please press the thanks button if you find this helpful.

ashik992 said:
I know how that works. but may be ther is a bug. The flash is never complete. Did you tried to read the lines on the console?? It just jump to press any key to continue. There was suppoed to be many steps before it. And the process was supposed to take a little more time. And the result is no change to your device at all.
Please try to Quote when you post about another post, or it get untressable.
-----------------------------------------------------------------------------
Please press the thanks button if you find this helpful.
Click to expand...
Click to collapse
I'll make a PrintScreen when flasing again. My tablet works AWESOME now with SmoothROM so I don't even want to flash stock

sdelange99 said:
I'll make a PrintScreen when flasing again. My tablet works AWESOME now with SmoothROM so I don't even want to flash stock
Click to expand...
Click to collapse
Thanks but no need to struggle for me.
I'll try myself any other time. and +1 fro SmoothROM. It's really cool. :highfive:

[Q] How to get back app menu on Nexus Me v5 ROM

I dont know how but i removed the app menu option from the screen from my ga;axy y. I have installed the nexus Me v5 Rom in it. Can you please tell, how to get it back???
I know that factory restore is an option but i want to first look for any other option rather than reseting my phone
http://postimg.org/image/gwvzdbpgr/

I don't use that rom so the wording might be slightly different depending on its launcher
Long press on any blank area of the home screen
select add launcher action
Select add/close app drawer
long press on app draw image
drag it anywhere you want to put it

marcussmith2626 said:
I don't use that rom so the wording might be slightly different depending on its launcher
Long press on any blank area of the home screen
select add launcher action
Select add/close app drawer
long press on app draw image
drag it anywhere you want to put it
Click to expand...
Click to collapse
Thank You. It has worked. It was so simple & i was just panicking. Thanks

rom issue
aman95 said:
I dont know how but i removed the app menu option from the screen from my ga;axy y. I have installed the nexus Me v5 Rom in it. Can you please tell, how to get it back???
I know that factory restore is an option but i want to first look for any other option rather than reseting my phone
Click to expand...
Click to collapse
can you pls tell me how did you installed the rom? i have tried to install that rom with the provided kernel and rom links on the main thread, but im stuck in boot loop.
i think im not doint anything wrong, i have followed every step on the main thread.

Dont worry
davithdeathrider said:
can you pls tell me how did you installed the rom? i have tried to install that rom with the provided kernel and rom links on the main thread, but im stuck in boot loop.
i think im not doint anything wrong, i have followed every step on the main thread.
Click to expand...
Click to collapse
I was also facing the same problem. You are not installing the kernel properly. Download kernel from http://www.mediafire.com/download/s32dnj9g9g44h31/Percy_G2_CyanogenMod2_2+.zip
Then download ROM from either xda developers or from http://goo.im/devs/YashRastogi/Galaxy Y Android Development/NexFit/NexusFit_v0.1_CM7_YOUNG.zip
Copy all the files to your SD card. And then follow the following video. Please leave a thanks & tell me if it works. [first time booting takes time]
http://www.youtube.com/watch?v=erOUCOWND7o

aman95 said:
I was also facing the same problem. You are not installing the kernel properly. Download kernel from http://www.mediafire.com/download/s32dnj9g9g44h31/Percy_G2_CyanogenMod2_2+.zip
Then download ROM from either xda developers or from http://goo.im/devs/YashRastogi/Galaxy Y Android Development/NexFit/NexusFit_v0.1_CM7_YOUNG.zip
Copy all the files to your SD card. And then follow the following video. Please leave a thanks & tell me if it works. [first time booting takes time]
thats exactly the same tutorial i followed just after the xda tutorial didnt work for me, im still stuck on boot loop
---------- Post added at 01:44 PM ---------- Previous post was at 01:29 PM ----------
aman95 said:
I was also facing the same problem. You are not installing the kernel properly. Download kernel from http://www.mediafire.com/download/s32dnj9g9g44h31/Percy_G2_CyanogenMod2_2+.zip
Then download ROM from either xda developers or from http://goo.im/devs/YashRastogi/Galaxy Y Android Development/NexFit/NexusFit_v0.1_CM7_YOUNG.zip
Copy all the files to your SD card. And then follow the following video. Please leave a thanks & tell me if it works. [first time booting takes time]
http://www.youtube.com/watch?v=erOUCOWND7o
Click to expand...
Click to collapse
thats exactly the same tutorial i followed after the xda tutorial didnt work for me, im still stuck in boot loop
Click to expand...
Click to collapse