Database Users

Jellybean or Ice cream sandwich on Ideos S7

Jellybean or Ice cream sandwich on Ideos S7
Here is the step by step guide for the joy (of course for the newbies).
Say thanks to goodoane, asturel, luisrene88, Jota, dzonikg , tri_zet*
and many for this.
1. Go here : http://www.androidtablets.net/forum...ical/15812-rom-tri_zet-ideos_s7-slim-mod.html and download the zip file :S7_trzmod-v3.zip
2. Then go here : http://www.androidtablets.net/forum...recovery-ideos-s7-classic-cmr-v6-0-1-2-a.html and download this recovery image: CM recovery.img
3. Now rename this recovery image to recovery-trzmod3.img and replace that with the image file of same name in S7 trzmod-V3.zip
4. Now unzip it in computer and now you are ready for flashing recovery by running update.cmd.
5. Next visit this page http://www.androidtablets.net/forum...yanogenmod-9-s7-slim-alpha-21.html#post237650 and download the boot images cm9 boot image from http://www.share-byte.net/yJkZ6X and cm10 from http://www.share-byte.net/cQhhFq
6. Then go on to http://www.androidtablets.net/forum...al/45329-rom-cyanogenmod-9-s7-slim-alpha.html and download the latest roms in zip files from the link http://www.asturel.hu/cm9_s7/
7. Now rename the cm9 boot image to just boot.img and replace that with the boot image in cm9rom. Repeat this with the cm10.
8. Also download the latest respective google apps from the links in http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
9. Now copy the roms and gapps zips to your internal sd card
10. Turn on usb debugging and connect ideos to pc. Run the update.cmd in the trzmod v3 folder.
11. First install the adb huawei drivers
12. Then install the recovery ie. The altered ere ics recovery we have replaced initially
13. Reboot to recovery and exit the cmd
14. Disconnect from the pc and do factory reset, wipe cache, wipe dalvik cache in advanced
15. select install zip from sd card and then choose zip from sd card. Choose cm9 or cm10 as you wish
16. you have it.
Whatever happens to your tab is your business. Read this threads in detail about ups and downs of each rom and check on latest boot image kernels.
1. http://www.androidtablets.net/forum...al/45329-rom-cyanogenmod-9-s7-slim-alpha.html
2. http://www.androidtablets.net/forum...l/46180-rom-cyanogenmod-9-s7-105-testing.html
Remember this is a developing subject. Dont spam those threads with noob questions. Above I have explained it in the most simple noob way. There is no other easier way. This is for s7 classic ie. 10X versions. Best wishes
my blog : www.bijopaul.blogspot.com

Solved: How to copy roms and files to "INTERNAL SD CARD" ?
Problem: My device says there is no SD card in it
but i do have it

5. Next visit this page http://www.androidtablets.net/forum/...-alpha-22.html and download the boot images cm9 boot image from http://www.share-byte.net/yJkZ6X and cm10 from http://www.share-byte.net/cQhhFq
Click to expand...
Click to collapse
i cant download them cm9 and 10
just need 9 atm but when i click on download file i get this (after a min or so waiting)
Access denied for user 'root'@'localhost' (using password: NO)
any1 got it and put it on mediafire or something pls

Hello
djaydino said:
i cant download them cm9 and 10
just need 9 atm but when i click on download file i get this (after a min or so waiting)
Access denied for user 'root'@'localhost' (using password: NO)
any1 got it and put it on mediafire or something pls
Click to expand...
Click to collapse
There are so many ROMs there, which one do you want ?

urgent pls
dkharpuri said:
There are so many ROMs there, which one do you want ?
Click to expand...
Click to collapse
i tried everything but in the last updated failed please retry this is the message am getting how to overcome it now
urgent pls

antonieoalan said:
i tried everything but in the last updated failed please retry this is the message am getting how to overcome it now
urgent pls
Click to expand...
Click to collapse
if it is for slim here you go paranoid 2.54 ..its with gapps include so dont need to flash them.
http://www12.zippyshare.com/v/55512286/file.html
Sent from my YP-G70 using xda app-developers app

help out
DZonikg said:
if it is for slim here you go paranoid 2.54 ..its with gapps include so dont need to flash them.
http://www12.zippyshare.com/v/55512286/file.html
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
ok thanks
but i tried again with the same rom mentioned above now it started installing i think how much time it takes its keeping on blinking

antonieoalan said:
ok thanks
but i tried again with the same rom mentioned above now it started installing i think how much time it takes its keeping on blinking
Click to expand...
Click to collapse
you must wipe everything in cwm before install..first boot takes some 10 minutes.
Sent from my YP-G70 using xda app-developers app

DZonikg said:
you must wipe everything in cwm before install..first boot takes some 10 minutes.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
---------- Post added at 09:35 AM ---------- Previous post was at 09:33 AM ----------
antonieoalan said:
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
Click to expand...
Click to collapse
ok nw i got into the recovery mode by luck but not ableto select the option with the help of vol buttons
---------- Post added at 09:38 AM ---------- Previous post was at 09:35 AM ----------
antonieoalan said:
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
---------- Post added at 09:35 AM ---------- Previous post was at 09:33 AM ----------
ok nw i got into the recovery mode by luck but not ableto select the option with the help of vol buttons
Click to expand...
Click to collapse
third time now stuck at ideos screen again have to instal ffrom dload and then start off again frm first
is there any shortcut to overcome this

i successfully instaled it the rom looks good but wifi not working and the phone gets rebooting on and off
so am goin to try the paranoid 2.16 rom now see u good night

antonieoalan said:
i successfully instaled it the rom looks good but wifi not working and the phone gets rebooting on and off
so am goin to try the paranoid 2.16 rom now see u good night
Click to expand...
Click to collapse
i dont like the paranoid angel i like the cm10 version from asturel only but am getting the follwoing errors
1. gets rebboting off frequently
2. sd card not getting detected
3. Wifi not getting enbled even though i used many appliactions from gapps to enable it
4. but the look is awesome
i just need it for the day to day use of this mobile with the jellybean

Ok am back to eclair let me wait for the stable version of jelly ban for this mini device
Sent from my IDEOS S7 using xda app-developers app

hey i did everything you said, my tablet opened up BUT my touchscreen is going crazy! when i touch it doesn't work properly for example i touch in the midle of the screen it showes that i touching in the up left corner of the screen and when i use the pad a mouse (like pc) appears i can't even control my tablet... any suggestion?
IDEOS S7 105

is this working for huwae ideos s7 not the slim one.....am a new bee so please answer my question...T_T

it works on Huawei S7 Slim (S7-202u)
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!

how's it going?
cmallagoli said:
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!
Click to expand...
Click to collapse
I'm glad to see current activity here, as I have an S7 that needs this treatment. Exactly what did you install? Is it all working? Thanks.

Thanks

cmallagoli said:
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!
Click to expand...
Click to collapse
can you tell me the step you do ?
from the first post there is so many application that I need to download. is that true ?
thank you

Hi,
I'm going to be crazy!!
I do all waht you say but when i try to choose Zip from sdcard it say "E:Can't mount /sdcard/" that's all!!!
Impossile to access to my rom.zip!!!
Please Help
Stéph.

can't select option using volume buttons on clockworkmod recovery!
i was doing smoothly following the procedures but i get stuck always on cwm recovery because i cant enter any other option aside from reboot because the touchscreen is not working as well as the volume buttons, only the power button is working...did i did something wrong? or is it because the Ideos S7 slim 201w has no official cwm recovery yet?

Phone Bricked? Please help

So I rooted my RAZR M using motofail2go, and all was well.
Installed 'RAZR-M-Safestrap-3.12', as I was going to flash a custom ROM. I first backed up my Original Rom using the backup function.
I then wiped 'System', and went to flash the new ROM, but the flash did not work, so I restarted.
Now the problem is when the phone reboots, it showes the Safestrap splash screen with the Recovery option and start normal, but it is not working, as not sensing my inputs or something, after about 5 sec it goes to a blank screen and sits.
I tried to hard boot into the Android System Recovery, and tried to download an official Verizon ROM and install using 'apply update from external storage' using my micro sd, but I keep getting an error E:signature verification failed.
Does anyone know where I can find an official ROM to set it back to normal so I can use my phone again?
Thanks in advance.
Also: My phone originally had 4.0.4 version.

cfdp said:
So I rooted my RAZR M using motofail2go, and all was well.
Installed 'RAZR-M-Safestrap-3.12', as I was going to flash a custom ROM. I first backed up my Original Rom using the backup function.
I then wiped 'System', and went to flash the new ROM, but the flash did not work, so I restarted.
Now the problem is when the phone reboots, it showes the Safestrap splash screen with the Recovery option and start normal, but it is not working, as not sensing my inputs or something, after about 5 sec it goes to a blank screen and sits.
I tried to hard boot into the Android System Recovery, and tried to download an official Verizon ROM and install using 'apply update from external storage' using my micro sd, but I keep getting an error E:signature verification failed.
Does anyone know where I can find an official ROM to set it back to normal so I can use my phone again?
Thanks in advance.
Also: My phone originally had 4.0.4 version.
Click to expand...
Click to collapse
if you can get back into recovery, you should be able to press "restore" assuming you backed up your previous ROM.

cfdp said:
So I rooted my RAZR M using motofail2go, and all was well.
Installed 'RAZR-M-Safestrap-3.12', as I was going to flash a custom ROM. I first backed up my Original Rom using the backup function.
I then wiped 'System', and went to flash the new ROM, but the flash did not work, so I restarted.
Now the problem is when the phone reboots, it showes the Safestrap splash screen with the Recovery option and start normal, but it is not working, as not sensing my inputs or something, after about 5 sec it goes to a blank screen and sits.
I tried to hard boot into the Android System Recovery, and tried to download an official Verizon ROM and install using 'apply update from external storage' using my micro sd, but I keep getting an error E:signature verification failed.
Does anyone know where I can find an official ROM to set it back to normal so I can use my phone again?
Thanks in advance.
Also: My phone originally had 4.0.4 version.
Click to expand...
Click to collapse
What you might want to to is use RSDlite and flash that image you downloaded. This seems like it would help you, though I have not personally tried it:
http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html
EDIT: And once the flash is complete, I would reboot into recovery again and wipe data and cache and then let it boot into the phone.
EDIT 2: Oh, and in addition to RSDLite, you will need the Motorola USB drivers so your computer can see the phone over USB.

Coronado is dead said:
What you might want to to is use RSDlite and flash that image you downloaded. This seems like it would help you, though I have not personally tried it:
http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html
EDIT: And once the flash is complete, I would reboot into recovery again and wipe data and cache and then let it boot into the phone.
EDIT 2: Oh, and in addition to RSDLite, you will need the Motorola USB drivers so your computer can see the phone over USB.
Click to expand...
Click to collapse
Dude, you sir, are a life saver. I couldn't find the info that the link you just posted anywhere. Now I can fix my phone, lol..
Sent from my PG86100 using Tapatalk 2

Coronado is dead said:
What you might want to to is use RSDlite and flash that image you downloaded. This seems like it would help you, though I have not personally tried it:
xxxx
EDIT: And once the flash is complete, I would reboot into recovery again and wipe data and cache and then let it boot into the phone.
EDIT 2: Oh, and in addition to RSDLite, you will need the Motorola USB drivers so your computer can see the phone over USB.
Click to expand...
Click to collapse
Sorry xda wouldn't let me post, reCaptcha wasn't working for some reason. Realized your link wasn't allowing me to reply lol
Anyways, Thanks a lot, that got me back up to stock and working, and I was able to reflash a custom rom (flashed to Rom slot 1, then backed up, and recovered into the stock slot). :good:

[Q] Completely Bricked Nexus 7

Okay I'm a noob when it comes to flashing and all this custom rom stuff. I wanted to flash a tablet ui rom from this website
at wonderhowto.com
They said I needed to be at 4.2.2 and so I checked my tablet's settings and it stated that I was at 4.2. Being the noob that I am I thought 4.2 was the same as 4.2.2 (not knowing it was 4.2.0) so I flashed it anyway using WugFresh's Nexus tool kit and it immediately got bricked at the google x screen. So after some research and a few downloaded files later, I found the stock 4.2 nexus 3G zip. So I did a stock recovery with that and everything was restored. Yay! I still wanted that tablet UI so the next step was to update to 4.2.2. I was able to upgrade to 4.2.2 using the nexus system update check in the About Tablet settings. Now that I had the 4.2.2, I flashed the Tablet UI patch to my device and it worked fine. Device booted up with the tablet UI and everything but the landscape mode was a little buggy. So, I decided to go back to the stock rom in which he provided in his blog under "Restoring Back to Stock UI". I downloaded that to my device and installed using the TWRP. Now this is where the problem started. When I booted up my device it got stuck on the google X screen. So I rebooted the device over and over again and the same problem persisted. I went to Wugfresh's toolkit and decided to stock recover using the original nakasig J0P40C 4.2.0 build and now the device won't turn on, stays stuck on the Google logo screen, and no matter how many times I stock recover it just stays in the Google logo screen.
- I've completely wiped the cache and formated the data, sd card through the TWRP. I'm able to reach the TWRP using WugFresh's tool kit under "temporary custom recovery".
- Not sure but I have a feeling that it's not working because I'm essentially downgrading from 4.2.2 to 4.2.0. If this is the case how can I get a stock 4.2.2
- Please any help is wanted. My device is my life right now.

Can you get into bootloader mode?
If so:
Get your restore image from here:https://developers.google.com/android/nexus/images
In wugfresh' toolkit select 'soft brick / boot loop' at device state, under the flash stock button.
Connect your Nexus to your PC and get it into bootloader mode.
Click the flash stock button.
Select the option to choose your own image and click the original one from Google.
Now flash and hope it's booting again!
If not so:
Sorry, I can't help you :-[
Sent from my Nexus 7 using xda premium

It's kinda common problem. The reason is not your downgreading. I't something else. As you are using NRT(one of my fev) you are too close to the solve. Heres the steps you need to take.
* Reboot into bootloader,
- Advance->reboot recovery in NRT
- or if you don't wanna use NRT turn off your device(hold the power button for about 10sec) now hold the power and volume down butto untill the google logo shows up
- than you should be in the fastboot mode
* Now click Flash Stock + Unroot in NRT(Can't boot up) go through the process(I'd recomment 4.2.2 stock)
* You got your devece into 4.2.2stock
If you wanna get a custom rom with Tablet UI you can skip the uper part.
* Reboot your device in TWRP
* Get an USB flash drive with the custom ROM( Smooth ROM is my personal fev.
* Connect the USB flast to your tablet via a OTG cable.
* Select install from TWRP select USB otg (or something like that)
* Now Select the custom rom from the Files and Swipe to install.
* Go through the installation process.
* After the installation is done wipe cach & devlock.
* Turn off the device from TWRP.(Sometimes direct rebooting form TWRP causes a problem).
* Power it on and you got a custom rom that has an Tablet UI.
* As far as I remember Smooth ROM is previously rooted. Though I rooted it using NRT(4.2.2 stock worked for me).
* As you are using a custom rom you should use a custom recovery.
Hope this is gonna work let me know if doesn't.
_____________________________________________
Don't just say thank you there is a button for thanking.
---------- Post added at 02:33 PM ---------- Previous post was at 02:26 PM ----------
sdelange99 said:
Can you get into bootloader mode?
If so:
Get your restore image from here:https://developers.google.com/android/nexus/images
In wugfresh' toolkit select 'soft brick / boot loop' at device state, under the flash stock button.
Connect your Nexus to your PC and get it into bootloader mode.
Click the flash stock button.
Select the option to choose your own image and click the original one from Google.
Now flash and hope it's booting again!
If not so:
Sorry, I can't help you :-[
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
That is supposed to be wokring. But I never could get the "Other/Brows" working in NRT. Think this is a bug.
---------- Post added at 02:36 PM ---------- Previous post was at 02:33 PM ----------
And @slimsoul I think this is not a situation which can be called as "Completely Bricked Nexus 7"

Can't you click the flash button, choose other / browse in the upper section and choose "I downloaded one mysef..." in the lower section?
Otherwise just try installing if you ever need it.

sdelange99 said:
Can't you click the flash button, choose other / browse in the upper section and choose "I downloaded one mysef..." in the lower section?
Otherwise just try installing if you ever need it.
Click to expand...
Click to collapse
I know how that works. but may be ther is a bug. The flash is never complete. Did you tried to read the lines on the console?? It just jump to press any key to continue. There was suppoed to be many steps before it. And the process was supposed to take a little more time. And the result is no change to your device at all.
Please try to Quote when you post about another post, or it get untressable.
-----------------------------------------------------------------------------
Please press the thanks button if you find this helpful.

ashik992 said:
I know how that works. but may be ther is a bug. The flash is never complete. Did you tried to read the lines on the console?? It just jump to press any key to continue. There was suppoed to be many steps before it. And the process was supposed to take a little more time. And the result is no change to your device at all.
Please try to Quote when you post about another post, or it get untressable.
-----------------------------------------------------------------------------
Please press the thanks button if you find this helpful.
Click to expand...
Click to collapse
I'll make a PrintScreen when flasing again. My tablet works AWESOME now with SmoothROM so I don't even want to flash stock

sdelange99 said:
I'll make a PrintScreen when flasing again. My tablet works AWESOME now with SmoothROM so I don't even want to flash stock
Click to expand...
Click to collapse
Thanks but no need to struggle for me.
I'll try myself any other time. and +1 fro SmoothROM. It's really cool. :highfive:

Need help with 2012 N7 that is kind of bricked!

OK so I know there is A TON of info on these forums.
I searched around but I did not see anything similar to my situation.
If there is a thread, please just link it and ill delete this thread.
Basically I had rooted my N7 back earlier this year and had a custom rom as the 5.0 OTA made my N7 run like crap.
It was fine until the last few months, it got REALLY slow. I didnt update it, or mod it other then flashing the roms.
So I set out to get a new rom. I figured id try the 6.0 AOSP rom.
DL it, as well as the GAPPS and tried to install it. All I ever got was a continuous error saying, "setup wizard has stopped".
Searched some more and saw that someone fixed it by installing a bare bones GAPPS and then WIPING Dalvik and cache immediately after flashing GAPPS.
I did this and no change. Still an error.
So I noticed that when I was in Windows, my N7 showed as having 5+/- gigs free out of 13gb.
So I figured let me wipe this whole thing clean and start fresh.
BTW- this has all been done with Wugfresh toolkit.
So I went ahead and erased/ formatted and planned to return to stock and then re-root and flash a 4.44 rom as I saw that on the grouper nothing over 4.44 works great and all I want is a stockish N7 that stays fast and works 100%.
Well now all I get is the Google scree with the Unlock icon and a green start icon and when you try to go into bootloader it says booting failed in upper left corner.
Any ideas hahaha.
Thanks!

I never used Wugfresh ......Are you able to get to recovery? If so what recovery do you have?
Sent from my Nexus 6 using Tapatalk
---------- Post added at 10:34 PM ---------- Previous post was at 10:29 PM ----------
Check this out I use it on my 2012 N7.......http://forum.xda-developers.com/showthread.php?t=2533035
[ROM][4.4.4 STOCK KTU84P][BSZKitKat v1.6][SuperSU|ZipAlign|DEODEX|ODEX][20/06/14]
Sent from my Nexus 6 using Tapatalk

twics said:
I never used Wugfresh ......Are you able to get to recovery? If so what recovery do you have?
Sent from my Nexus 6 using Tapatalk
---------- Post added at 10:34 PM ---------- Previous post was at 10:29 PM ----------
Check this out I use it on my 2012 N7.......http://forum.xda-developers.com/showthread.php?t=2533035
[ROM][4.4.4 STOCK KTU84P][BSZKitKat v1.6][SuperSU|ZipAlign|DEODEX|ODEX][20/06/14]
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I had the latest twrp recovery, I think 2.08 ?
I can't seem to get to the recovery screen.....only the bootload screen.

Well your bootloader is unlocked so you should be able to flash recovery again via ADB...when you are pressing the volume buttons to select recovery or bootloader is there an option for recovery? If so what does it say or do why you can't get to recovery.
Sent from my Nexus 6 using Tapatalk

twics said:
Well your bootloader is unlocked so you should be able to flash recovery again via ADB...when you are pressing the volume buttons to select recovery or bootloader is there an option for recovery? If so what does it say or do why you can't get to recovery.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Sorry I disappeared, I got busy with school and I just put the device to the side.
I am trying to get it restored but no matter what I do, wugfresh just hangs "waiting for device".
It finds it via ADB...
i tried doing a restore with my backup, tried flashing stock/recovery...
All I get it the main screen with Google and the unlock icon....If I hit the volume rocker I can jump to the bootload screen but when I try to jump to recovery it says "boot failed" in upper left corner.
Any ideas or is this thing toast?

1993cb7 said:
Sorry I disappeared, I got busy with school and I just put the device to the side.
I am trying to get it restored but no matter what I do, wugfresh just hangs "waiting for device".
It finds it via ADB...
i tried doing a restore with my backup, tried flashing stock/recovery...
All I get it the main screen with Google and the unlock icon....If I hit the volume rocker I can jump to the bootload screen but when I try to jump to recovery it says "boot failed" in upper left corner.
Any ideas or is this thing toast?
Click to expand...
Click to collapse
NO!! Your device is not toast if it powers on then it should be recoverable, my advice forget WugFresh check out this page on how to get TWRP installed> https://twrp.me/devices/asusnexus72012wifi.html for latest twrp recovery, on this page you will find info how to get ADB running properly, once you have Twrp recovery installed try this Rom it is stock Lolliopop and runs great better than previous ones http://forum.xda-developers.com/nexus-7/development/rom-t2931064
---------- Post added at 02:00 PM ---------- Previous post was at 01:54 PM ----------
Please let me know how you get on. also if you get TWRP installed wipe everything apart from internal storage before install Rom.

1993cb7 said:
Sorry I disappeared, I got busy with school and I just put the device to the side.
I am trying to get it restored but no matter what I do, wugfresh just hangs "waiting for device".
It finds it via ADB...
i tried doing a restore with my backup, tried flashing stock/recovery...
All I get it the main screen with Google and the unlock icon....If I hit the volume rocker I can jump to the bootload screen but when I try to jump to recovery it says "boot failed" in upper left corner.
Any ideas or is this thing toast?
Click to expand...
Click to collapse
Hi there and a happy new year .....well guess what iv got the same issue as well now and I'm also using WugFresh I can reboot bootloader from NRT but that's it can't get to recovery can't write to recovery can't flash recovery all I can do is to TWRP temporary via NRT ,but still can't write to it, I read somewhere that the internal SD is fried which is why I can't write to system which means can't flash Recovery or Rom which mean can't reboot system so unfortunately for us its looking like a new motherboard or new tablet.
Sent from my HTC One using Tapatalk

twics said:
Hi there and a happy new year .....well guess what iv got the same issue as well now and I'm also using WugFresh I can reboot bootloader from NRT but that's it can't get to recovery can't write to recovery can't flash recovery all I can do is to TWRP temporary via NRT ,but still can't write to it, I read somewhere that the internal SD is fried which is why I can't write to system which means can't flash Recovery or Rom which mean can't reboot system so unfortunately for us its looking like a new motherboard or new tablet.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Did you ever get it sorted out?
Im trying to fix mine because someone wants to buy it so Im going to spend all night working on it. If I get anywhere ill let you know.

1993cb7 said:
Did you ever get it sorted out?
Im trying to fix mine because someone wants to buy it so Im going to spend all night working on it. If I get anywhere ill let you know.
Click to expand...
Click to collapse
OK Im back. Roughly an hour and a half. Not bad.
So what I did(if you're stuck on the bootloader screen like me)
Updated to the latest version of Wugfresh.
Made sure it updated all of the files it needed etc.
I then went through the process of uninstalling and reinstalling the drivers for ADB etc. I actually had an issue with it not detecting my device so it recommended installing the generic Google drivers....I did that.
Even after doing that, when I would check ADB connectivity it would say no devices found. I remembered that sometimes it would still communicate with the device even though it said nothing was found. I decided to do a fastboot format under advanced utilities because I knew that i erased it previously and I think that is where I ran into problems.
Sure enough adb found my device and formatted the bootloader no problem. I then continued with the restore to stock/w boot loop function and had patience...it took FOREVER to load the system image and then it took like 10 minutes to reboot but it did and I have a fully functional device right now.
I logged in and turned USB debugging on and re-locked the device. I then did a system wipe from inside the system and will sell it tomorrow.
So have faith, its not over till its over.
and p.s. I changed the USB port that I was plugged into. I have a USB hub that I usually connect too but I figured id connect directly to a USB port on the machine. Not sure if that helped, but people recommend it anyway.

How to fix samsung galaxy tab 4 SM T330NU bootloop [ASAP]

I rooted my cousin's samsung galaxy tab 4 (sm-t330nu) afterwards I tried to install Root Browser but then the tab froze so I thought a simple glitch or something, so I turned it of. Then the bootloop happened. I tried factory reset, wipe cache, but none worked... I tried to get as much information like using odin, but I really don't know what to do. I tried flashing TWRP- T330.TWRP.2.8.3.0.img then I made it to T330.TWRP.2.8.3.0.tar.md5 using a tool, flash using odin v3.07, but i cannot boot into it. Tried using philz touch recovery but I think the version I used wasn't meant for the tab. This is my first time handling android so I really don't know much.
Can you guys post a simple step by step on how to use any recovery tool (CMW/ TWRP/ PTR/ etc) or any kind of way to fix this bootloop? I'm just frustrated spending three night trying to understand the whole procedures. I'm going to try doing a hard reset though. correct me if I'm wrong but does flashing a custom rom a surefire way to fix it?
Thanks in advance

nothing4 said:
I rooted my cousin's samsung galaxy tab 4 (sm-t330nu) afterwards I tried to install Root Browser but then the tab froze so I thought a simple glitch or something, so I turned it of. Then the bootloop happened. I tried factory reset, wipe cache, but none worked... I tried to get as much information like using odin, but I really don't know what to do. I tried flashing TWRP- T330.TWRP.2.8.3.0.img then I made it to T330.TWRP.2.8.3.0.tar.md5 using a tool, flash using odin v3.07, but i cannot boot into it. Tried using philz touch recovery but I think the version I used wasn't meant for the tab. This is my first time handling android so I really don't know much.
Can you guys post a simple step by step on how to use any recovery tool (CMW/ TWRP/ PTR/ etc) or any kind of way to fix this bootloop? I'm just frustrated spending three night trying to understand the whole procedures. I'm going to try doing a hard reset though. correct me if I'm wrong but does flashing a custom rom a surefire way to fix it?
Thanks in advance
Click to expand...
Click to collapse
I'm by no means an expert. I just dabble when there is something particular I want to do, but I had a similar problem earlier and managed to fix it using odin. I have the sm-t330nu as well and I was trying to move an app to the system apps folder. When I went to reboot I got the bootloop. I installed odin and flashed the same rom I had before and it solved the problem. Before you flash in odin your device needs to be in the correct mode. Press the power button then press home volume down and power button to get the download custom rom screen then press the volume up button to continue. That should take you to the odin mode download screen and from there you can flash in odin on your pc once odin has detected your device. Good luck!

Iaokim said:
I'm by no means an expert. I just dabble when there is something particular I want to do, but I had a similar problem earlier and managed to fix it using odin. I have the sm-t330nu as well and I was trying to move an app to the system apps folder. When I went to reboot I got the bootloop. I installed odin and flashed the same rom I had before and it solved the problem. Before you flash in odin your device needs to be in the correct mode. Press the power button then press home volume down and power button to get the download custom rom screen then press the volume up button to continue. That should take you to the odin mode download screen and from there you can flash in odin on your pc once odin has detected your device. Good luck!
Click to expand...
Click to collapse
Thanks for the advice! But what did you mean by "the same rom"?

go to twrp reboot settings, select bootloader and reflash via odin your device to its original stock rom. This will bring your device to its original settings without root and custom recovery. This is the solution I've done to my device. At least I can still use my device instead of other ways in trying to solve this custom recovery boot loop cause by incompatibility or no version of twrp made available to samsung galaxy tab 4.8.0 sm-t330nu.