Database Users

cwm probloem installing android

hi ppl, i'm new wih htc hd2, and had some trouble while istalling crawling android..
when i click on run ad rom sd phone says kernel init error... plz can u tell me the correct procedure? atm i have wp7.
installeed cwm version 1.13
thanks!

dani.g said:
hi ppl, i'm new wih htc hd2, and had some trouble while istalling crawling android..
when i click on run ad rom sd phone says kernel init error... plz can u tell me the correct procedure? atm i have wp7.
installeed cwm version 1.13
thanks!
Click to expand...
Click to collapse
magldr is 1.13
clockwork is like 3.04 or something

ye, u right, but any totourial to install it?

Stuck on "GO GO GO!" in AD Recovery.

I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.

itzstevo said:
I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.
Click to expand...
Click to collapse
first off once you do HSPL you don't ever need to do it again, and the radio you flashed was 2.15.50.14? once you flash the radio you don't need to reflash it again, unless changing to a different one.
Now I would suggest to start back at task29,
then MGLDR 1.13,
redownload the partition in case of any corruption,
are you using win xp or 7?
if on win 7 right click on the daf and run as admin.
I know there's not much difference from what you said but maybe you have a corrupted download and it's messing things up.

Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users

I'm using windows vista & i tried the HD2 NAND toolkit still the same result. :/

so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.

itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
Then you have a hardware issue with the phone itself!
Sent from my HyperDroidCM7 HD2

sebasmiles said:
Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users
Click to expand...
Click to collapse
Thanx a lot, I solved problem "stuck on GO GO GO!" with HD2 NAND Toolkit!

I often encounter this problem,too

I really dont know sorry for u

hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee

itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
i'm having exactly the same problem, i'm trying to install android because if i install the stock rom it stucks at the htc logo an when i install android it works for a few minutes but then it freezes
i've searched on google for it and they say that it can be a overheating problem

It was a touchscreen issue when i had this error. I had replaced the digitizer but the ribbon came loose during repair. If, when you boot to the tricolor screen (hold volume down + power), you dont see cotulla hspl 0x40 or 0x50 you have a touch screen problem.
Sent from my GT-N8013 using Tapatalk 2

stuck on go go go!
tanny1 said:
hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee
Click to expand...
Click to collapse
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.

jimani said:
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.
Click to expand...
Click to collapse
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.

Robbie P said:
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.
Click to expand...
Click to collapse
Hi Robbie,
Actually I tried every thing:
At the first time it was a touchscreen issue, I replaced it and try to reinstall the android rom; i used the toolkit 4.3 to flash.
1.HSPL3
2.WIPE(Task 29)
3.Radio-Leo-2.15.50.14
3.MAGLDR 1.13
4.Repartition 280MB for system, 5 for cash.
But when I tried to go in AD RECOVEY, my phone stuck 1234 GO,GO,GO.
I perform this steps on two htc hd2( one is T-Mobile) but no success.
Please help.
Justin.

did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?

Robbie P said:
did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?
Click to expand...
Click to collapse
Hi Robbie,
Yes I installed hspl 2.08 using hspl3.
After DFT MAGLDR Boot loader is loaded I install the partition after that I go in ad recovery to load the Clockwork Mod Recovery then... stuck!
When I tried to boot from the sd card it's say : SD open kernel failed .
I don't know may be I'm mixing things. can you provide me a clear step by step doc?
Thanks in advance.
Justin.

Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.

Robbie P said:
Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.
Click to expand...
Click to collapse
Yes I tried many ways: hd toolkit, tools separately,...
also I tried to specify the folder that the zImage and initrd.gz files are in,but still giving that horrible message:SD open kernel failed

HELP! Hard reset

I have [DFT] MAGLDR 1.13 installed on my HD2 and the AD Hardreset function does not work.
I tried using the hardware key to hard reset the phone, it did not work as well.
I am trying to get rid of this install so that I can install other custom roms onto the SD card instead.
Can someone please tell me how I can get rid of my [DFT]MAGLDR 1.13 installed on the phone?
Thanks so much.

doing a hard reset will not set you back to windows and original install you need to flash back to stock windows for that

crus said:
I have [DFT] MAGLDR 1.13 installed on my HD2 and the AD Hardreset function does not work.
I tried using the hardware key to hard reset the phone, it did not work as well.
I am trying to get rid of this install so that I can install other custom roms onto the SD card instead.
Can someone please tell me how I can get rid of my [DFT]MAGLDR 1.13 installed on the phone?
Thanks so much.
Click to expand...
Click to collapse
Do a task29. If u dont know how i can rip off tekst from my tutorial done for instaling rcmix3d rom.

Wdustin1 said:
doing a hard reset will not set you back to windows and original install you need to flash back to stock windows for that
Click to expand...
Click to collapse
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Cjovecje! said:
Do a task29. If u dont know how i can rip off tekst from my tutorial done for instaling rcmix3d rom.
Click to expand...
Click to collapse
Will I be able to use task29 and then install other custom Android rom?
Will want to install new custom ROM on the SD card instead of NAND.
Thanks

Then just flash a stock Windows Mobile ROM and go from there with your SD Android.
Get a dual boot application that will ask you every time what you want to boot.
Just curious, why do you want to go back to SD Android?

crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Will I be able to use task29 and then install other custom Android rom?
Will want to install new custom ROM on the SD card instead of NAND.
Thanks
Click to expand...
Click to collapse
Task29 removes everything from nand. So you can flash any other NAND rom. Clk Or magldr.

katalin_2003 said:
Just curious, why do you want to go back to SD Android?
Click to expand...
Click to collapse
Want to try Android on SD to see if I can install more apps on the phone.
Sent from my GT-I9100 using XDA App

crus said:
Want to try Android on SD to see if I can install more apps on the phone.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You can't run the system from SD and install to the phone. SD android doesn't touch the nand in any way.

samsamuel said:
You can't run the system from SD and install to the phone. SD android doesn't touch the nand in any way.
Click to expand...
Click to collapse
Oh. So I still have to have a stock firmware on the NAND.
If that is the case I will just flash it to a latest NAND Android.
Thanks everyone for the help.

crus said:
Oh. So I still have to have a stock firmware on the NAND..
Click to expand...
Click to collapse
well not quite, you could have android on nand and another android on sd, or wp7 on nand and android on sd.

crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Try to do adrecovery and factory reset, so you can flash another rom, I just did that now switching to another rom =P
Click to expand...
Click to collapse

ian95 said:
crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Try to do adrecovery and factory reset, so you can flash another rom, I just did that now switching to another rom =P
Click to expand...
Click to collapse
It would be really nice for your not to post stupid questions. I told him to go back to winmo to see if everything is working. Flashing from winmo is easier then from this "unknown" state. I think he got all help he needed.Ad recovery and factory reset wont help him much.
Click to expand...
Click to collapse

what next after task29..?

I am on a wp7 rom and am now moving to android. I am going to use the hd2 toolkit for the operation. I just want to know what I have to do next after task29??? I will be using a nand version of android.or can anyone plz tell me how to go about the whole operation since am a noob and won't like to mess anything up.thank you...

kwartey said:
I am on a wp7 rom and am now moving to android. I am going to use the hd2 toolkit for the operation. I just want to know what I have to do next after task29??? I will be using a nand version of android.or can anyone plz tell me how to go about the whole operation since am a noob and won't like to mess anything up.thank you...
Click to expand...
Click to collapse
After doing a task 29, format your sd card to FAT 32. (make sure you are using radio 2.15)
Then flash a bootloader, and then cwm.
GL

yz.hd said:
After doing a task 29, format your sd card to FAT 32. (make sure you are using radio 2.15)
Then flash a bootloader, and then cwm.
GL
Click to expand...
Click to collapse
I already have hspl .will I have to flash it again?? So after the task29, I have to flash magldr then after I flash the radio before the cfw. Is that right????

kwartey said:
I already have hspl .will I have to flash it again?? So after the task29, I have to flash magldr then after I flash the radio before the cfw. Is that right????
Click to expand...
Click to collapse
No need to re flash hspl. Flash radio, then magldr, and then cwm.

yz.hd said:
No need to re flash hspl. Flash radio, then magldr, and then cwm.
Click to expand...
Click to collapse
thanks very much buddy.i will inform u if there's a problem.thanks again..

kwartey said:
thanks very much buddy.i will inform u if there's a problem.thanks again..
Click to expand...
Click to collapse
No problem

In post 1 you say you are on wp7, therefore the radio must already be ok.
task 29 is mostly pointless unless you are having issues, and if you don't bother with it you won't need to reflash magldr either. You should simply be able to enter magldr, install a cwm layout and flash android.
the only sticking point is removing the custom formatted partition on the SD card, , there are a number of "how to " threads for that.

Question about Magldr

How to install WP7 via Magldr when only Power Button and Back button works on hardware keyboard of hd2 Can i remap the keys of MAGLDR? So back to be green button

Xazzy said:
Can i remap the keys of MAGLDR?
Click to expand...
Click to collapse
no, unfortunately you can't.

Hijacking this thread... I bought an HD2 off of a friend bc he broke it... Ive now got it running CM10 Jelly Bean. Unfortunately, it freezes. It will seem to be fine, then it will freeze and the only cure is to pull the battery. Sometimes after a freeze it will let me boot, but usually it will load to the GO! GO! GO! and freeze there until I pull the battery again and let it sit for about 10 min. Would it be possible that magdlr has issues? I only have a mac or i would just reflash Magdlr. If someone can give me a lead on what to try I would greatly appreciate it!!!

Welp, this could be bad blocks on NAND or overheating issue. You can try to reflash magldr, just put magldr's .nbh file on the root of SD Card and rename it to LEOIMG.nbh, then go to bootloader.

Spaqin said:
Welp, this could be bad blocks on NAND or overheating issue. You can try to reflash magldr, just put magldr's .nbh file on the root of SD Card and rename it to LEOIMG.nbh, then go to bootloader.
Click to expand...
Click to collapse
I think I understand but just to verify, you are saying that if I put the nbh on the SD Card it will flash Magdlr when I boot to bootloader?
Also, at first I susspected overheating as well, but then it worked for over a day before it froze, and it never feels hot...

Yep, it will flash automatically.
Wysmyrane ze srajPoda Tacza 3G z użyciem oprogramowania Tapatalk

Nand bad
If its bad blocks on Nand is the phone shot? I reflashed Magdlr and it still freezes.

You can still try NativeSD method. If it freezes while using sd rom, that could mean the motherboard is broken.
Wysmyrane ze srajPoda Tacza 3G z użyciem oprogramowania Tapatalk

Spaqin said:
You can still try NativeSD method. If it freezes while using sd rom, that could mean the motherboard is broken.
Click to expand...
Click to collapse
Any chance you can point me to a link for that?

With a recovery you should probably have by now for NAND Android, create an ext4 partition. Choose a ROM from NAND section and install it, choosing NativeSD method of installation. If you don't have ext4 recovery, you can create the partition with a partition manager, just keep in mind it should be a second primary partition. Then set SD folder in magldr to NativeSD and try to boot the rom.
Wysmyrane ze srajPoda Tacza 3G z użyciem oprogramowania Tapatalk