Database Users

Flash NAND from SD

Hi
Me and i know a lot of you out there have got a big problem on our phone, and broken the usb port. So no flashing ROM from USB sync :S.
I'm hoping that Cedesmith's CLK NAND loader + CWM flashed from an .nbh using the sdcard method will be the solution we are looking for.
Hope some of the great devs out there think of a way for us to flash NAND or even WM7.

Just get the port fixed?!
PS. There is no such thing as "WM7".

TheATHEiST said:
Just get the port fixed?!
PS. There is no such thing as "WM7".
Click to expand...
Click to collapse
Couldn't thinked of that by my own... Thanks for the obviusly help. WM7 is Windows Mobile 7 and im prety sure there is such a thing.

Ahmun_Ra said:
Couldn't thinked of that by my own... Thanks for the obviusly help. WM7 is Windows Mobile 7 and im prety sure there is such a thing.
Click to expand...
Click to collapse
./Correction_Needed
Windows Phone 7.
Get your port fixed, or If you can try to flash cwm recovery.

Shatterv2 said:
./Correction_Needed
Windows Phone 7.
Get your port fixed, or If you can try to flash cwm recovery.
Click to expand...
Click to collapse
Correction noted.
Dude once again with fixing the port... If that was an option i would be asking for a .nhg so i could format the phone. I've got MAGLDR installed using the SD card now, and i know about cwm, i want a way to partion the phone from the SD for Android or WP7. If i knew how to do that i would be asking...
Thanks a lot

same here
Hi,
My USB is also broken. This is somehow not covered by warranty. Repairservice wants to charge me for 536€ and Amazon sells the HD2 already for 499€.
I cannot afford a new one nor the repair.
Beeing able to flash everything including HSPL and MAGLDR from SD-Card.
I would be very greatful for that option as the standard software provided from HTC is very disappointing with all the great options for the HD2 out there.
Best Regards,
Joe

Ahmun_Ra said:
Couldn't thinked of that by my own... Thanks for the obviusly help. WM7 is Windows Mobile 7 and im prety sure there is such a thing.
Click to expand...
Click to collapse
Well you're wrong!
There is no "Windows Mobile 7" The OS you are referring to is called "Windows Phone 7" and its a completley new OS and nothing to do with windows mobile, hence it doesnt run any of WM programs.

i have a question in regards to the clockwork mod recovery now on hd2, I have installed magldr1.13 thats fine, i have also flashed the clcokwork recovery as well.
I am totally lost as to how you are supposed to be able to flash rom zips from clockwork instead of nand flashing. I know how to nand flash, and I also know how to use clockwork on regular android o.s systems , but im lost as to what this clockwork recovery works with nand roms and regular zip or z7 roms.
If I flash a regular nand rom like i have, and then get into clockwork and try to install a rom from clockwork it messses up?
Are the cockwork roms for the hd2 specific as in zip format or can you intall a nand rom from clockwork it seems people have merged some nand roms with sd .
Any insight or guide would help.

lojak29 said:
i have a question in regards to the clockwork mod recovery now on hd2, I have installed magldr1.13 thats fine, i have also flashed the clcokwork recovery as well.
I am totally lost as to how you are supposed to be able to flash rom zips from clockwork instead of nand flashing. I know how to nand flash, and I also know how to use clockwork on regular android o.s systems , but im lost as to what this clockwork recovery works with nand roms and regular zip or z7 roms.
If I flash a regular nand rom like i have, and then get into clockwork and try to install a rom from clockwork it messses up?
Are the cockwork roms for the hd2 specific as in zip format or can you intall a nand rom from clockwork it seems people have merged some nand roms with sd .
Any insight or guide would help.
Click to expand...
Click to collapse
Yessss. Please make a way to flash new partitions with sdcard. I have a USB port with a broken contact between the mainboard and the USB port that can't be fixed.

[Q] Recovery MOD 1.12 400MB stuck on GO GO GO

Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
What build were you trying?
Sent from my HD2 Droid HD using XDA App

Just redo everything.

hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!

Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App

Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App

walidhazem said:
hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!
Click to expand...
Click to collapse
Format that card in android, or wm

werngrort said:
Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?

brunteboy said:
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?
Click to expand...
Click to collapse
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works

silverwind said:
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works
Click to expand...
Click to collapse
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.

akapaul26 said:
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.
Click to expand...
Click to collapse
No need if you flash via DAF method (just select menu no. 5 USB Flasher while the phone plugged to PC) and run the DAF.exe (Android rom) from your PC.
You will only have to flash RECOVERY partition if you want to flash via ZIP/CWM mode

jalshah05 said:
Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
so you install magldr then you installed CWM and you held down the right button whilst it booted, did it go into the menu?
sounds like you havent installed a rom yet

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
Need to Instal HSPL 2.08 from HSPL installation HSPL upper than that wont work....double check it.....

[q] hyperdroid v2.1.0

hi i have big problems with my hd2.i had installed the hyperdroid 2.1.0 and at first everythink works fine.but a month ago my phone crashes sometimes when i use googlemaps and other thinks.it freeze.now i installed the newest version and it works more badly.sometimes the phone does not start and it freeze before magldr shows the gogogo.
what i have done:
i've done an backup and installed the new version via sd card.so long it works i can start android.i was happy and try to load some apps then it crashed.
i have the newest magldr and the right 150 mb version for hyperdroid.
i hope someone can help me and sry i have not enough posts to post it in the hyperdroid post.
Greetz DmX
ps:sry for my english

latest version on sd ? .....try it on NAND
I dont know much about hd2 ...but try to reset everything ...latest hyperdroid on NAND ....and nothing on the sd

dmx489371 said:
hi i have big problems with my hd2.i had installed the hyperdroid 2.1.0 and at first everythink works fine.but a month ago my phone crashes sometimes when i use googlemaps and other thinks.it freeze.now i installed the newest version and it works more badly.sometimes the phone does not start and it freeze before magldr shows the gogogo.
what i have done:
i've done an backup and installed the new version via sd card.so long it works i can start android.i was happy and try to load some apps then it crashed.
i have the newest magldr and the right 150 mb version for hyperdroid.
i hope someone can help me and sry i have not enough posts to post it in the hyperdroid post.
Greetz DmX
ps:sry for my english
Click to expand...
Click to collapse
Try doing a task 29, then re installing magldr and cwm. From cwm wipe data/cache/dalvik cache, then install hyperdroid 5.3.0
Ahmed93 said:
latest version on sd ? .....try it on NAND
I dont know much about hd2 ...but try to reset everything ...latest hyperdroid on NAND ....and nothing on the sd
Click to expand...
Click to collapse
It is on NAND, he meant that he installed the rom from sd card

o i c

what next after task29..?

I am on a wp7 rom and am now moving to android. I am going to use the hd2 toolkit for the operation. I just want to know what I have to do next after task29??? I will be using a nand version of android.or can anyone plz tell me how to go about the whole operation since am a noob and won't like to mess anything up.thank you...

kwartey said:
I am on a wp7 rom and am now moving to android. I am going to use the hd2 toolkit for the operation. I just want to know what I have to do next after task29??? I will be using a nand version of android.or can anyone plz tell me how to go about the whole operation since am a noob and won't like to mess anything up.thank you...
Click to expand...
Click to collapse
After doing a task 29, format your sd card to FAT 32. (make sure you are using radio 2.15)
Then flash a bootloader, and then cwm.
GL

yz.hd said:
After doing a task 29, format your sd card to FAT 32. (make sure you are using radio 2.15)
Then flash a bootloader, and then cwm.
GL
Click to expand...
Click to collapse
I already have hspl .will I have to flash it again?? So after the task29, I have to flash magldr then after I flash the radio before the cfw. Is that right????

kwartey said:
I already have hspl .will I have to flash it again?? So after the task29, I have to flash magldr then after I flash the radio before the cfw. Is that right????
Click to expand...
Click to collapse
No need to re flash hspl. Flash radio, then magldr, and then cwm.

yz.hd said:
No need to re flash hspl. Flash radio, then magldr, and then cwm.
Click to expand...
Click to collapse
thanks very much buddy.i will inform u if there's a problem.thanks again..

kwartey said:
thanks very much buddy.i will inform u if there's a problem.thanks again..
Click to expand...
Click to collapse
No problem

In post 1 you say you are on wp7, therefore the radio must already be ok.
task 29 is mostly pointless unless you are having issues, and if you don't bother with it you won't need to reflash magldr either. You should simply be able to enter magldr, install a cwm layout and flash android.
the only sticking point is removing the custom formatted partition on the SD card, , there are a number of "how to " threads for that.

[Q] Task29

I am using Android, and I want to do Task29. How? And what is it? And after it what will I have to do? Flash recovery and CLK again?

kubekpop said:
I am using Android, and I want to do Task29. How? And what is it? And after it what will I have to do? Flash recovery and CLK again?
Click to expand...
Click to collapse
Ithink you have to read first..
http://forum.xda-developers.com/showthread.php?t=893948
take your time!

But I have NAND android installed. It's just I have installed so many different roms - MIUI, Sense, CM7 and I want do clear junk after it and flash android again. How does it look when android is on? How do I have to establish connection via Active Sync?
[EDIT]
OK, I think I got that.
[EDIT2]
OK, it works. but tell me - if I installed CLK 1.5, do I have to install ClockWork MOd? CLK 1.5 has it in it I think, so there's no need?

kubekpop said:
[EDIT2]
OK, it works. but tell me - if I installed CLK 1.5, do I have to install ClockWork MOd? CLK 1.5 has it in it I think, so there's no need?
Click to expand...
Click to collapse
No.
Yes, it does.
No, there isn't.