Database Users

Alright Man What Gives!

ok so why cant i get android to boot past the htc logo? I have this rom (T-Mobile_HD2_MR_Software_3.14.531.1) with this radio (2.15.50.14) I have hspl3, perform task 29 loaded that rom n radio, put this android build on my reformatted sd card(CMYLXGOs.Droid.BlueTopia.v1.0.4) and it will not load past the htc Logo! What am i missing it has to be something simple i dont get it i have done this b4 but it now wont work!?!?!

ihateu said:
ok so why cant i get android to boot past the htc logo? I have this rom (T-Mobile_HD2_MR_Software_3.14.531.1) with this radio (2.15.50.14) I have hspl3, perform task 29 loaded that rom n radio, put this android build on my reformatted sd card(CMYLXGOs.Droid.BlueTopia.v1.0.4) and it will not load past the htc Logo! What am i missing it has to be something simple i dont get it i have done this b4 but it now wont work!?!?!
Click to expand...
Click to collapse
Try magldr and one of my nand roms and let me know what happens. My guess is its your sdcard.
-CMYLXGO

cmylxgo said:
Try magldr and one of my nand roms and let me know what happens. My guess is its your sdcard.
-CMYLXGO
Click to expand...
Click to collapse
yea i thought it could be the sd card too, but i tried to boot android from a different sd card,no luck. I will read up on how to do a nand rom and hopefully figure it out.

Google "SD Card Formatter" and then use FULL format with ERASE ON.

format
thanks i downloaded a panasonic sd card formater did a full full erase with it checked to "ON" it was reformatted but it said the device does not support Flash Erase.... im gonna try it out now
DUDE U ROCK MAN THAT DID IT THANK U SP MUCH!!!!!!!

[Q] Recovery MOD 1.12 400MB stuck on GO GO GO

Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
What build were you trying?
Sent from my HD2 Droid HD using XDA App

Just redo everything.

hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!

Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App

Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App

walidhazem said:
hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!
Click to expand...
Click to collapse
Format that card in android, or wm

werngrort said:
Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?

brunteboy said:
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?
Click to expand...
Click to collapse
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works

silverwind said:
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works
Click to expand...
Click to collapse
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.

akapaul26 said:
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.
Click to expand...
Click to collapse
No need if you flash via DAF method (just select menu no. 5 USB Flasher while the phone plugged to PC) and run the DAF.exe (Android rom) from your PC.
You will only have to flash RECOVERY partition if you want to flash via ZIP/CWM mode

jalshah05 said:
Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
so you install magldr then you installed CWM and you held down the right button whilst it booted, did it go into the menu?
sounds like you havent installed a rom yet

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
Need to Instal HSPL 2.08 from HSPL installation HSPL upper than that wont work....double check it.....

About to flash my first NANDroid ROM - want to confirm a couple of things!

Hi all,
After using Android via SD for months, I feel the time has come to make it my full-time OS.
I've chosen this ROM as my first to flash: http://forum.xda-developers.com/showthread.php?t=908528 - Looks like a decent, stable Desire HD (Sense) port.
I've read all the usual n00b threads but due to paranoia and anxiety want to just confirm I'm about to do everything right before the big flash...
This rom uses ext3 data (like a fake 1gb internal memory) so I've partitioned my SD card as per instructions in the thread.
My main concern is flashing MAGLDR, i.e. "you need to flash MAGDLR 1.13 and the 400mb Recovery"
From what I gather, I download "-Download v1.3 400MB-" from this thread and run the update utility via USB like flashing any (WM) ROM. Is it best to Task29 before this and do it from the bootloader? Do I need to flash anything else before-hand? What's the difference between the magldr 1.13 and magldr 1.13 with 400mb recovery that I'm told to use in the ROM thread? Do I need to flash one before the other?
After this is on my phone it looks simple enough to flash the rom via the SD card inside MAGLDR's options and finish the job.
I've got the correct radio, etc. So all I'm really asking for is confirmation on how to get MAGLDR on my phone.
Sorry for the seemingly stupid question(s) but I have indeed read through the threads but just want to be sure!
Thanks!

The 400MB recovery is not MAGLDR - it's Clockworkmod recovery with a specific 400MB flash layout.
Task 29 is optional, but recommended. Then boot to bootloader, flash your radio of choice, flash MAGLDR, flash Clockworkmod, and finally flash your chosen NAND build from within Clockworkmod, which is accessed from the MAGLDR menu. There's not too much that can go wrong if you read all the tutorials, and everything in the OP for your chosen build.
Best of luck!
Sent from my HTC HD2 using XDA App

SMS92 said:
My main concern is flashing MAGLDR, i.e. "you need to flash MAGDLR 1.13 and the 400mb Recovery"
From what I gather, I download "-Download v1.3 400MB-" from this thread and run the update utility via USB like flashing any (WM) ROM. Is it best to Task29 before this and do it from the bootloader?
Click to expand...
Click to collapse
shouldnt matter, you are about to partition it anyway.
Do I need to flash anything else before-hand?
Click to expand...
Click to collapse
radio, if its below v 2.10.50 or so, and 2.08.hspl of course.
What's the difference between the magldr 1.13 and magldr 1.13 with 400mb recovery that I'm told to use in the ROM thread? Do I need to flash one before the other?
Click to expand...
Click to collapse
theyre the same thing, , , magldr will work with any recovery size, and depending on the rom size you choose, depends how big you want the partition to be. You have a big rom, so use 400, i have a light rom, so i use the 150. the magldr is the same, the only difference is two numbers in a text file that set the size of the partition during flashing.
After this is on my phone it looks simple enough to flash the rom via the SD card inside MAGLDR's options and finish the job.
I've got the correct radio, etc.
Click to expand...
Click to collapse
heh then ignore my 'radio and hspl ' comment.
So all I'm really asking for is confirmation on how to get MAGLDR on my phone.
Click to expand...
Click to collapse
bootloader - usb - flash magldr.
Sorry for the seemingly stupid question(s) but I have indeed read through the threads but just want to be sure!
Thanks!
Click to expand...
Click to collapse

Yeah. Basically run Task29 (format the NAND) if you want to. Then after that run the RomUpdateUtility to flash MAGLDR 1.13 via HSPL then once you're inside of MAGLDR (hold power button while powering on) and flash the 400mb Clockwork Recovery image via the .daf file found in your Clockwork download folder from USB Flasher in MAGLDR. That'll flash CWR, then reboot to MAGLDR again and chose 'AD Recovery'. Then you're in Clockwork and free to do whatever you want.

Much thanks guys - this'll be tomorrow's lunchtime project! Trust XDA to fill me with confidence
@samsamuel - I see you're in or from Libya... Good luck to you and your people - the world is watching and supporting you!

SMS92 said:
@samsamuel - I see you're in or from Libya... Good luck to you and your people - the world is watching and supporting you!
Click to expand...
Click to collapse
im not, its a solidarity choice, but thanks on their behalf!

samsamuel said:
im not, its a solidarity choice, but thanks on their behalf!
Click to expand...
Click to collapse
Good man!

[Q] not a noob but I'm stuck

hi .
i put nand on my phone but i didn't really like it so put winmo back on and i wanted to put Android on the sd card. only problem now is when i press haret and android boots up it getting stuck on the android splash screen . and it doesn't load android . i have tryed it with a few different droid roms and it keeps happenin .
and i don't know what I'm missing .
can someone pls point me in the right direction pls .
regards

iainbp said:
hi .
i put nand on my phone but i didn't really like it so put winmo back on and i wanted to put Android on the sd card. only problem now is when i press haret and android boots up it getting stuck on the android splash screen . and it doesn't load android . i have tryed it with a few different droid roms and it keeps happenin .
and i don't know what I'm missing .
can someone pls point me in the right direction pls .
regards
Click to expand...
Click to collapse
Did you task 29 and reformat your SD card?

Snarksneeze said:
Did you task 29 and reformat your SD card?
Click to expand...
Click to collapse
no haven't done that . didn't think i needed to .
I'll have to copy all the stuff in my sd card then try again .

iainbp said:
no haven't done that . didn't think i needed to .
I'll have to copy all the stuff in my sd card then try again .
Click to expand...
Click to collapse
I also experience that way. What I did was try to flash task 29, flash magldr 1.13, flash CWM (be carefull that each rom require different partition lay out) and flash the Nandroid roms.
Good luck

silverwind said:
I also experience that way. What I did was try to flash task 29, flash magldr 1.13, flash CWM (be carefull that each rom require different partition lay out) and flash the Nandroid roms.
Good luck
Click to expand...
Click to collapse
except the op wants android and winmo, so no magldr/cwm
OP - try upgrading your radio, the stock one probably isn't high enough version to run android, which requires a ..50.. radio, and (unless you have a tmous) you may have a stock ..51.. radio now.

ive formatted my sd card but its not going into android .
ive got radio 2.15.50.14 is that the right radio to have ?
edit*** i know im missing something but i just cant work out what it is that im missing

And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.

thehumble1 said:
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
Click to expand...
Click to collapse
You don't need HSPL to boot from SD card using haret. All you need is WM and a .50 radio.
-HD2 Android-

thehumble1 said:
And you are sure you reflashed your HSPL? once you reflashed WinMo, it eliminated your ability to start Android. Make sure you flash to current HSPL or you won't boot. Also make sure your bootloader or Android build is running CLRCAD.exe before it starts HARET.
Click to expand...
Click to collapse
just reinstalled hspl4 2.08
and now just waiting for it to load , its staying on the rafdroid screen saver with the green htc man .
hope this works
edit*** screen is still on the green android man been on it for bout half hour i think . ive got a .50 radio but still not having any luck and i really dont know why

iainbp said:
just reinstalled hspl4 2.08
and now just waiting for it to load , its staying on the rafdroid screen saver with the green htc man .
hope this works
edit*** screen is still on the green android man been on it for bout half hour i think . ive got a .50 radio but still not having any luck and i really dont know why
Click to expand...
Click to collapse
Try going into your Android folder in Windows Mobile by using File Explorer, and deleting your data.img, or moving it to a separate folder on your SD card. This will erase any data you had under Android before, but at least it should boot, the 1st boot should take a bit longer than usual, because a new data.img will be creataed. If this doesn't work, you'll have to download and install a new build.
-HD2 Android-

huggs said:
Try going into your Android folder in Windows Mobile by using File Explorer, and deleting your data.img, or moving it to a separate folder on your SD card. This will erase any data you had under Android before, but at least it should boot, the 1st boot should take a bit longer than usual, because a new data.img will be creataed. If this doesn't work, you'll have to download and install a new build.
-HD2 Android-
Click to expand...
Click to collapse
thank you tryin it now.....
and thankyou to the rest of you guys for helping me , hope this works
edit*** nope still not loading , f**k knows why . cant think why it wont load , must be missing something,
i'll try a different rom and see if that works

what also can be a problem is that when you mobile is creating a data.img there isn't enough memory on your SD for the data.img, then it will get stuck on HTC logo

iainbp said:
ive formatted my sd card but its not going into android .
ive got radio 2.15.50.14 is that the right radio to have ?
edit*** i know im missing something but i just cant work out what it is that im missing
Click to expand...
Click to collapse
Did you do format to fat 32 with a full wipe? Our did you just do quick format? Do the full one. Or your d/l could be corrupted.

mattfmartin said:
Did you do format to fat 32 with a full wipe? Our did you just do quick format? Do the full one. Or your d/l could be corrupted.
Click to expand...
Click to collapse
yeah i did a full fat32 format

HELP! Hard reset

I have [DFT] MAGLDR 1.13 installed on my HD2 and the AD Hardreset function does not work.
I tried using the hardware key to hard reset the phone, it did not work as well.
I am trying to get rid of this install so that I can install other custom roms onto the SD card instead.
Can someone please tell me how I can get rid of my [DFT]MAGLDR 1.13 installed on the phone?
Thanks so much.

doing a hard reset will not set you back to windows and original install you need to flash back to stock windows for that

crus said:
I have [DFT] MAGLDR 1.13 installed on my HD2 and the AD Hardreset function does not work.
I tried using the hardware key to hard reset the phone, it did not work as well.
I am trying to get rid of this install so that I can install other custom roms onto the SD card instead.
Can someone please tell me how I can get rid of my [DFT]MAGLDR 1.13 installed on the phone?
Thanks so much.
Click to expand...
Click to collapse
Do a task29. If u dont know how i can rip off tekst from my tutorial done for instaling rcmix3d rom.

Wdustin1 said:
doing a hard reset will not set you back to windows and original install you need to flash back to stock windows for that
Click to expand...
Click to collapse
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Cjovecje! said:
Do a task29. If u dont know how i can rip off tekst from my tutorial done for instaling rcmix3d rom.
Click to expand...
Click to collapse
Will I be able to use task29 and then install other custom Android rom?
Will want to install new custom ROM on the SD card instead of NAND.
Thanks

Then just flash a stock Windows Mobile ROM and go from there with your SD Android.
Get a dual boot application that will ask you every time what you want to boot.
Just curious, why do you want to go back to SD Android?

crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Will I be able to use task29 and then install other custom Android rom?
Will want to install new custom ROM on the SD card instead of NAND.
Thanks
Click to expand...
Click to collapse
Task29 removes everything from nand. So you can flash any other NAND rom. Clk Or magldr.

katalin_2003 said:
Just curious, why do you want to go back to SD Android?
Click to expand...
Click to collapse
Want to try Android on SD to see if I can install more apps on the phone.
Sent from my GT-I9100 using XDA App

crus said:
Want to try Android on SD to see if I can install more apps on the phone.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You can't run the system from SD and install to the phone. SD android doesn't touch the nand in any way.

samsamuel said:
You can't run the system from SD and install to the phone. SD android doesn't touch the nand in any way.
Click to expand...
Click to collapse
Oh. So I still have to have a stock firmware on the NAND.
If that is the case I will just flash it to a latest NAND Android.
Thanks everyone for the help.

crus said:
Oh. So I still have to have a stock firmware on the NAND..
Click to expand...
Click to collapse
well not quite, you could have android on nand and another android on sd, or wp7 on nand and android on sd.

crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Try to do adrecovery and factory reset, so you can flash another rom, I just did that now switching to another rom =P
Click to expand...
Click to collapse

ian95 said:
crus said:
I don't need it to flash back to original windows, just want to get rid of the current Android stock on the memory and flash to something else.
Try to do adrecovery and factory reset, so you can flash another rom, I just did that now switching to another rom =P
Click to expand...
Click to collapse
It would be really nice for your not to post stupid questions. I told him to go back to winmo to see if everything is working. Flashing from winmo is easier then from this "unknown" state. I think he got all help he needed.Ad recovery and factory reset wont help him much.
Click to expand...
Click to collapse