Database Users

IPAQ 614c ROM Kitchen (Dump form the Phone)

Warning: This ROM Kitchen has not been tested. Non’t Flash unless you know what you are doing.! This ROM Kitchen is for Personal use only, ROM's Created with this Kitchen should not be released on the forum.
1. The project was dumped from the phone;
2. The project has been build by use tool for HP 6288.
3. The project has not been tested on my phone. Because I don’t know if Hard-SPL will be needed and how to modify the SPL.
4. I have no flashing software for 614c.
The Process of dump rom from the phone:
1. Dump the part02.raw and diskimage_Ver.nb0 use Pdocread.exe
2. Dump SYS and OEM from part02.raw use IMGFS tool
3. Dump XIP use tool for G900. you can download.
Tool for G900 http://rapidshare.com/files/101512976/RAW_NB0_XIP_TOOL.rar.html
RomKitchen http://rapidshare.com/files/101704280/RomKitchen_for_IPAQ_614c_WM6.0_18125_EN.rar.html .

Hi,
thanks for that. this is great !!!!!
I have a 61x prototype. And wanted to upgrade the rom. now as far as i know there are 2 parts which can be upgraded.
OS and firmware.
AFAIK the OS upgrade is fairly simple :
1. copy the files:
diagpdk.nb0
eboot.nb0
eboot_exp.nb0
ipl.nb0
uldr.nb0
xldrmdoc.nb0
and
flash.dio (which is the actual OS rom (diskimage_ver.nb0)
to a micro SD
boot the device + holding the lower left and top button.
It displays : SD flash
After some seconds the flash starts ... upgrading.
Reboot.
thats it.
First question. where do i get the other files from like eboot.nb0 ect.
I have an older version of these file, can I use them with the new image ?
2. The firmware (qualcomm)
You can use the qpst tool for that.
But now also the question. Is there a way to dump the qualcomm firmware of this device ? I also only have an older version.
BTW: the device also supports download os via USB and boot via USB KITL RNDIS.
But I have no clue how to use either.
I tried DNW.exe which detects the usb, and I can send files but I dont know at which offset address.
Thanks !

Hi,
I'm very gald geting reply from you.
I have used HTC/DOPOD's phone for many years. But It's first time to use HP's Phone. According to my Knowledge from HTC. we should flash the OS if we have valid diskimage_ver.nb0 and falshing tool. AS firmware, we have to wait for code from HP.
I saw the thread named 'Universal BootLoader Tool - Flash ANY valid rom to ANY iPAQ' In recent days. Following is link.
http://forum.brighthand.com/showthread.php?t=243984
If this tool can flash the diskimage_ver.nb0 without brick my phone. I think it's time to cook rom of 614c.
But I don't know if the IPAQ need to unlock CID. so I have wait for some one tell me know how.
Many thanks for your reply.

the ipaq 614 is not htc. but anyway the architecture is clear.
As mentioned flashing the os can be done by keycombination during boot + SD card.
I dont think the explained romupdate tools will work with the new device.
but anyway, someone finds the before mentioned nb0 files (like eboot.nb0 ect) useful I can upload them somewhere.
I flashed your downloaded image yesterday and it worked out well. but I still have the problem which is probably related to the firmware, that the screen stays dark when the WM os boots. but the OS works, you can use it, you can even make calls, but screen is dark.
I also have the old firmware files if someone can use them.
Thanks !

Dear SAXXON,
Can you tell me details about 'I flashed your downloaded image yesterday '? What tool did you use?
What's meaning 'you can even make calls, but screen is dark'?
Thanks a lot.

as described in this thread :
http://forum.xda-developers.com/showthread.php?t=374051
I flashed the rom with the "SD flash" key kombination .... (no extra tools needed)
I took my older *.nb0 files and replaced the diskimage*.nb0 file with yours.
It worked great. But I still have the problem which i had already before, which is related to the firmware, not to your OS rom. The problem is that the screen stays dark when booting the OS. but active sync works, when you press keys there is a sound, you can even take pictures.
So I am looking for a way to successfully install my older firmware for the qualcomm chipset ! I have the files but I dont know how to flash them properly. The SD flash function is only for the ROM I guess !
So if you have more resources ? information on how to flash the firmware for this device, would be great !!!
If you need a more detailed description on how to flash the rom let me know.
Thanks

i quess that if we cant find answers here we cant find them anywhere
the ipaq 614 is nothing without support
comon people help us out here
satiros

Friends, where can I get these file?
diagpdk.nb0
eboot.nb0
eboot_exp.nb0
ipl.nb0
uldr.nb0
xldrmdoc.nb0
and
flash.dio (which is the actual OS rom (diskimage_ver.nb0)
Li

Can someone post the entire files from rom dump, not only the OS but all the rest, Radio etc etc ?
Thanks !

I would really love to help because I would love to start doing things with my 614c.
What can I do to help?

New firmware
I went to HP service centre in my city last week to ask them to fix my GPS. Then the HP engineer flash my phone with the newest firmware. The flashing took about 40 minutes and about 5 firmwares were upgrade.
The firmware code from HP Asset Viewer are...
Version Tab:
Product Revision Level: 1.0
Rom Date: Feb182008
Rom Revision: MP-1.00.03
Bootloader Version: MP-1.01.00
XIP Version: 1.0.0.0
Camera Tab:
Hardware Driver Version: 0.0.3.0
Software Driver Version: D1.48.0
Software Version: 2.0.0.29
Bluetooth Tab:
Firmware Version: A05U
Driver Version: BCHS_WINCE_MOBILE_4_7_3
WLAN Tab:
Firmware Version: 9.70.3.18
Hardware Revision: 88W8686
Driver Version: 38.p28
GSM Tab:
Radio Firmware Version: M:MP-0082-030308
GPS Tab:
Driver Version: 1.0.0.0
Firmware Version: 4.0.70
Software Version: 1.0.0.0
I didn't note the version before upgrade so I don't know which parts were actually upgraded.
If you can find which firmwares are newer and you can tell me how to extract the firmware from my phone, I am willing to extract the firmware for you.
I think this is a very good phone. It just need a great rom to use with.

The firmware codes from my HP Asset Viewer are:
Version Tab:
Product Revision Level: 1.0
Rom Date: Jan292008
Rom Revision: MP-1.00.01
Bootloader Version: MP-1.00.01
XIP Version: 1.0.0.0
Camera Tab:
Hardware Revision: 0
Hardware Driver Version: 0.0.3.0
Software Driver Version: D1.48.0
Software Version: 2.0.0.29
Camera API Interface Version: 0.0.0.1
Bluetooth Tab:
Firmware Version: A05U
Hardware revision: BlueCore4ROM
Driver Version: BCHS_WINCE_MOBILE_4_7_3
Software Version: BCHS_WINCE_MOBILE_4_7_3
WLAN Tab:
Firmware Version: 9.70.3.18
Hardware Revision: 88W8686
Driver Version: 38.p28
GSM Tab:
Radio Firmware Version: M:MP-0077-140108
GPS Tab:
Revision Level: 0.0.0.0
Driver Version: 1.0.0.0
Firmware Version: 4.0.70
Software Version: 1.0.0.0
Looks like the GPS and Camera are unchanged from what I have. Others are different though. That would be awesome if you could get them off of there.

Can anybody tell me how to extract those firmwares from HP 612?

Yes I am interested too how to extract the firmware....
I know it is possible with the tools posted in the beginning of this rom kitchen thread.
Maybe someone has the time to do it.

infact the only file needed for now is the diskimage_ver.nb0 file.
please use the pdocread command as described.

how to enter the bootloader mode on ipaq 614? i have found link to chinese wm 6.1 rom for ipaq 614 here -> http://4pda.ru/forum/index.php?showtopic=79455 english(russian) rom is in development

see my posts on boot keys ...

WM 6.1 EN for ipaq 614 ,enjoy http://4pda.ru/forum/index.php?showtopic=79455

Z!L0G80 said:
WM 6.1 EN for ipaq 614 ,enjoy http://4pda.ru/forum/index.php?showtopic=79455
Click to expand...
Click to collapse
Any way to give us an English translation of the upgrade instructions? I used Babel Fish, but it's still unclear...

copy flash.dio to non SDHC micro card and use sdloader (see saxxon posts on boot keys)

Palm Treo pro Flashen

Hi,
I wanted to ask whether one can help me how can I install on this mobile WM 6.5? how I can flash it or hard ....
according to the instructions I've found here is not .. it will screen stekcen tricolor (on my Destop) is angeziegt error .. it would have no connection and so on.
Pc is with wind. 7
Phone details:
Software version: T850UEU-1.01-EMG
Hardware Version: A
Firmware version:
1.65.28.25
CC-Cap: Generic-German-8

[Q] Impossible to update/install NOW Samsung app

So... I have an unbranded Samsung Omnia7 16GB (from t-mo.de)
Installed UK Retail rom, and upgraded to Mango (via Zune, force).
After upgrade it was some troubles with my live account and i made hard reset. After this everything working fine. But it was impossible to upgrade NOW app (from Samsung Zone). I uninstalled it. After this i have a notice
"This application is not available for your devices. Press here for more info."
And after clicking :
"This might be because your phone software need to be updated, the application is exclusive to a different mobile provider, or the app is not available in your region."
Why before hard reset IT WAS possibility to Update/Install ?
Nothing changes after hard reset (just clean system).
I don't want to make a reset again )
All configs for region : UK.
OS: 7.10.7720.68
Firmware: 2424.11.8.5
Hardware: 3.15.0.4
Radio softw.: 2424.11.7.2
Radio hardw.: 0.0.0.800
Bootloader: 5.8.1.9
Chip: 0.36.2.0

I have the same problem...

+ 1
same problem!

same here

It's weird, i have it installed and working but if i go to samsung zone it tells me same message as first post, maybe they are fixing marketplace.

Same problem for me.

I had the same problem for a few days but now I can install/update it without any problem.

What's really bugging me, is that I can't find the exact error description for error 80320011. All search result indicate that this is somekind of periodical error, but I don't buy that.

Just got the update via Zune - Official prompt - Orange UK branded.
I've had no update notifications as of yet. I went to check Samsung now, update button was available but it gave me 80320011 error.
Now it is showing as my 1 update available but i can't install it.
odd...

Don't like having the update notification on my marketplace so i uninstalled the now app. I can no longer even install it as it says it's not available for my device / i need an update.
I guess the app itself is broken since loads are reporting this.

+1
I got official Mango yesterday to my unbranded unlocked 16GB and I have th esame issue. I uninstalled the original version and now I get the message that it is unavailable for my phone;duh..
we'll just have to wait and see what happens over the next few days.

I've the same problem!
i've updated my 16 gb to mango but when i try to update now it gave me the error.
I think the problem is that aren't installed some samsung drivers.

I installed the lastest samsun dribers and now have the following
FW 2424.11.8.5
HW 3.15.0.4
radio SW 2424.11.7.2
Bootloader 5.8.1.9
and still, I cannot install the latest version of NOW. I still had the original and deleted it thinking that it was preventing the newer version from installing and now I have lost the programme completely. I tried marketplace again this morning and still no joy. It simply says that the version of NOW is not suitable for my device.

17-apg said:
I installed the lastest samsun dribers and now have the following
FW 2424.11.8.5
HW 3.15.0.4
radio SW 2424.11.7.2
Bootloader 5.8.1.9
and still, I cannot install the latest version of NOW. I still had the original and deleted it thinking that it was preventing the newer version from installing and now I have lost the programme completely. I tried marketplace again this morning and still no joy. It simply says that the version of NOW is not suitable for my device.
Click to expand...
Click to collapse
I'm on...
FW 0222.11.8.5
HW 3.15.0.4
Radio SW 2424.11.7.2
Bootloader 5.8.1.9
Official update - no drivers added and mine doesn't work. I think the app is just broken rather than it being a driver issue.

Hey mates, I noticed the app in repository is a different version
i see:
Autore: SAMSUNG ELECTRONICS Co. Ltd.
data di pubblicazione: 25/08/2010
versione: 2.5.0.0, 8 MB
and checked my installed one is: 2.5.0.1 copyright 2011 Samsung Electronics.
what about yours??? (people that managed to install update)
XXKC1 rom with retail italy csc updated with network pull trick to mango
Versione SO: 7.10.7720.68
Numero revisione firmware: 2424.11.8.5
Numero revisione hardware: 3.15.0.4
Versione software radio: 2424.11.7.2
Versione hardware radio: 0.0.0.800
Versione bootloader: 5.8.1.9
Versione processore SOC: 0.36.2.0

nice look
my now is 2.5.0.1 copyright 2011 Samsung Electronics too.
and in market i cannot update it (obvius, it is still at 2.5.0.0)
but why !!!???
anyway my omnia run mango with an official upgrade (no network trik, straight upgrade from zune at the day one from developer beta)
Versione SO: 7.10.7720.68
Numero revisione firmware: 0222.11.8.5 -------> only this is different!! (but my zune doesn't show any unpgrade)
Numero revisione hardware: 3.15.0.4
Versione software radio: 2424.11.7.2
Versione hardware radio: 0.0.0.800
Versione bootloader: 5.8.1.9
Versione processore SOC: 0.36.2.0
maybe they have removed the last update and this make the app unavalaible to those who downloaded it? i am afraid to remove it, now "now" works (and the live tile works too, sometimes!) and what's appen if i uninstall it and cannot reinstall? sammie i love you but this time seems you fail!

Of course I don't remove it too for your firmware i saw a thread in forum with a program to update, just look for it , if you would like to

Also affected by this one - was unable to update the old version on my Focus, so deleted and now can't install at all...

Well, I then tried to get back to Nodo because, like you, I deleted NOW completely and then couldnt reinstall. The phone bricked and would not go back with the restore. So I installed KC1 using the WP7 downloader which worked fine and then tricked Zune to give me the updates. I now have NOW back again and it tells me there is an update for NOW in Marketplace. When I click on it it goes through the process asking me if I will allow location "on". When I click yes I get a message saying that the request cannot be completed quoting error code 80320011 so all that hassle for nothing. I too think its nothing to do with drivers etc. Sammy needs to get it fixed!

I ave same issue. I update my Omnia 7 to Mango, and now marketplace give me an 80320011 error, and uder software description is exclamation that says "This application is not available for your device". Good Lord, I have Samsung Omnia 7, not HTC, LG, or whatever. Why this could not be available for my device... grrr
---------- Post added at 03:33 PM ---------- Previous post was at 03:07 PM ----------
Sorry guys, in other tread someone give xap for new version 2.5 http://www.mediafire.com/?i69g6ckzxu1oldc

[Q] Which ROM can I use to solve my firmware problems?

Hi guys
I have a Omnia 7 noBrand 16GB (from Germany) with some firmware problem (no compass, no bluetooth, no hidden wifi..), and I'm looking for a good ROM. This is my situation:
PDA: I8700XXJK1
CSSC: I8700DBTJK1 (DBT = GERMAN)
SO: 7.10.7740.68
Firmware: 2424.10.11.1
Hardware: 3.15.0.4
Radio SW: 2424.11.2.2
Radio HW: 0.0.0.800
Bootloader: 5.2.1.4
SOC: 0.36.2.0
Which ROM and CSC do you recommend for italian provider?
Can I use again the JK1 ROM for solve the problems?
Tks

You could maybe try the XXKC1 firmware since it includes Italy.
Italian user Camazza flashed it and he reported that afterwards Zune updated the phone to:-
PDA: XXKI2
Phone: XXKI1
CSC: HUIKI2
Hurray for searching the forums!
Anyway, that's similar to my phone in the UK that is fully debranded. UK and Italy share the same XX unbranded firmware.
Hope you can follow the flashing guides in the Omnia7 development section and get your phone sorted

pLUSpISTOL said:
You could maybe try the XXKC1 firmware since it includes Italy.
Italian user Camazza flashed it and he reported that afterwards Zune updated the phone to:-
PDA: XXKI2
Phone: XXKI1
CSC: HUIKI2
Hurray for searching the forums!
Anyway, that's similar to my phone in the UK that is fully debranded. UK and Italy share the same XX unbranded firmware.
Hope you can follow the flashing guides in the Omnia7 development section and get your phone sorted
Click to expand...
Click to collapse
Thank you,
but Camazza said that KC1 is a Engineer ROM, is it real? In other sites, like samfirware, report KC1 as samsung ROM..

The_MaC said:
Thank you,
but Camazza said that KC1 is a Engineer ROM, is it real? In other sites, like samfirware, report KC1 as samsung ROM..
Click to expand...
Click to collapse
I think it's a Samsung Engineer ROM but Camazza said it updates through Zune to a normal ROM so I don't think you have much to worry about

ok,
I have flashed my phone with KC1 ROM and ITV CSC. This is the actual situation:
PDA: XXKK2
Phone: XXKI1
CSC: ITVKC1
SO: 7.10.8107.79
fw: 2424.11.11.2
radio sw: 242411.9.1
bootloader: 5.11.1.8
All seems to be ok. The only missed features are the connection with hidden wifi, and tethering.
Thanks a lot pLUSpISTOL

The_MaC said:
ok,
I have flashed my phone with KC1 ROM and ITV CSC. This is the actual situation:
PDA: XXKK2
Phone: XXKI1
CSC: ITVKC1
SO: 7.10.8107.79
fw: 2424.11.11.2
radio sw: 242411.9.1
bootloader: 5.11.1.8
All seems to be ok. The only missed features are the connection with hidden wifi, and tethering.
Thanks a lot pLUSpISTOL
Click to expand...
Click to collapse
Great stuff, you're welcome.
Just to double check if you have hidden WiFi or not. Go to Settings>WiFi>Advanced>Add(+) then enter the name of the hidden network. You are allowed up to 3.
To enable USB tethering follow this guide.
To enable Internet Sharing (wireless tethering) follow this guide.
You may already know these things but just thought I would post

yes, hidden wifi is there, you could add 3 networks
check also in diagnosis version that zune should have updated CSC to I8700ITVKI2

pLUSpISTOL said:
Great stuff, you're welcome.
Just to double check if you have hidden WiFi or not. Go to Settings>WiFi>Advanced>Add(+) then enter the name of the hidden network. You are allowed up to 3.
To enable USB tethering follow this guide.
To enable Internet Sharing (wireless tethering) follow this guide.
You may already know these things but just thought I would post
Click to expand...
Click to collapse
yess, I found my hidden wifi with your suggestion, great! Thank a lot!
DJBlaster-303 said:
yes, hidden wifi is there, you could add 3 networks
check also in diagnosis version that zune should have updated CSC to I8700ITVKI2
Click to expand...
Click to collapse
Hi DJBlaster,
I checked the CSC but after the Zune update I have the ITVKC1 versione, wich kind of difference are they?
Nice, I'm from Bologna like you

cool! Nice to meet you;
and for the question: I don't know but probably the csc contains updated settings from italian carriers, i just found it was different after updating to first mango version, if everything works but your csc is still ITVKC1, don't fix it
never mind
ciao!
p.s. for usb tethering probably you'd like better checking this post

Hello! can i unlock/root/jailbreak my phone
here are the stats:
OS version: 7.10.7720.68
Firmware version 2424.11.10.1
hardware version: 3.15.0.4
Radio Software: 2424.11.9.1
Radio hardware: 0.0.0.800
Bootloader: 5.10.0.4
Chip SOC Version: 0.36.2.0
ive got theese stats from the day i bought the phone.
ive been reading about nodo hack, but it seems that i cant do anything if im allready on this version?
EDIT:
I did just try the Windowsphonehack Windowbreak site, and it worked with it. i can connect to the Download mode.
it seems that i can root and jailbreak/unlock my phone. now to my question how to do that ??

lenti_db said:
Hello! can i unlock/root/jailbreak my phone
----
I did just try the Windowsphonehack Windowbreak site, and it worked with it. i can connect to the Download mode.
it seems that i can root and jailbreak/unlock my phone. now to my question how to do that ??
Click to expand...
Click to collapse
You just did. Windowbreak is the jailbreak.

My Trohpy hanges when power on

Hi people,
I've some problems with my HTC Trophy.
When I power on, it hanges and I need to take off the battery and power on again to finally work.
The screen outs next:
HTC
BLDR 0.0.2250
7.10 (7691)
I've restored factory setting using key combination and problem continues.
Any ideas, suggestions ?
I want to unlock itm could be a good moment to change the ROM version ?
Thank you

tonduma said:
Hi people,
I've some problems with my HTC Trophy.
When I power on, it hanges and I need to take off the battery and power on again to finally work.
The screen outs next:
HTC
BLDR 0.0.2250
7.10 (7691)
I've restored factory setting using key combination and problem continues.
Any ideas, suggestions ?
I want to unlock itm could be a good moment to change the ROM version ?
Thank you
Click to expand...
Click to collapse
Damnit, i seriously do not like the new XDA theme's thanks button....
Anyway, What? What does:
HTC
BLDR 0.0.2250
7.10 (7691)
Click to expand...
Click to collapse
mean? Do you have a picture? I'm assuming you have the GSM Euro Trophy. Have you attempted to unlock it or flash a newer rom of any kind? If your system build is 7691, then your running some old pre-release of Mango.
You might have a half bricked bootloader that is in need of GoldCard.

TheXev said:
Damnit, i seriously do not like the new XDA theme's thanks button....
Anyway, What? What does: mean? Do you have a picture? I'm assuming you have the GSM Euro Trophy. Have you attempted to unlock it or flash a newer rom of any kind? If your system build is 7691, then your running some old pre-release of Mango.
You might have a half bricked bootloader that is in need of GoldCard.
Click to expand...
Click to collapse
Hi,
I've GSM Euro Trophy in English. This device was a demo unit and I don't know if it was unlocked, flashed, ...
In a HTC customer service center, the technician suggest me that it could be a motherboard problem and he wants to check not for free, obviously. What are the symptoms of motherboard failure ?
In my opinion it seems that bootloader is damaged. What's the latest bootloader version of Trophy ?
More information about:
Name: HTC Trophy
Model: HTC PC401000
Software: Windows Phone 7.5
Total Storage: 7,21 GB
Available storage: 113,60 MB
OS version: 7691.WM7_Main
(mojobld).20110614-1407
Firmware revision number: 2250.21.00622.1428
Hardware revision number: 0003 (39%)
Radio software version: 5.65.09.25_22.45.50.21U
Radio hardware version: 3.102.0.D4
Bootloader version: 0.0.2250.0(125831)
Chip SOC version: 2.2.5.0
Thank you in advance.

tonduma said:
Hi,
I've GSM Euro Trophy in English. This device was a demo unit and I don't know if it was unlocked, flashed, ...
In a HTC customer service center, the technician suggest me that it could be a motherboard problem and he wants to check not for free, obviously. What are the symptoms of motherboard failure ?
In my opinion it seems that bootloader is damaged. What's the latest bootloader version of Trophy ?
More information about:
Name: HTC Trophy
Model: HTC PC401000
Software: Windows Phone 7.5
Total Storage: 7,21 GB
Available storage: 113,60 MB
OS version: 7691.WM7_Main
(mojobld).20110614-1407
Firmware revision number: 2250.21.00622.1428
Hardware revision number: 0003 (39%)
Radio software version: 5.65.09.25_22.45.50.21U
Radio hardware version: 3.102.0.D4
Bootloader version: 0.0.2250.0(125831)
Chip SOC version: 2.2.5.0
Thank you in advance.
Click to expand...
Click to collapse
Follow the Gold-card method listed in the sticky of this thread. Your phone is half-bricked.