Warning: This ROM Kitchen has not been tested. Non’t Flash unless you know what you are doing.! This ROM Kitchen is for Personal use only, ROM's Created with this Kitchen should not be released on the forum.
1. The project was dumped from the phone;
2. The project has been build by use tool for HP 6288.
3. The project has not been tested on my phone. Because I don’t know if Hard-SPL will be needed and how to modify the SPL.
4. I have no flashing software for 614c.
The Process of dump rom from the phone:
1. Dump the part02.raw and diskimage_Ver.nb0 use Pdocread.exe
2. Dump SYS and OEM from part02.raw use IMGFS tool
3. Dump XIP use tool for G900. you can download.
Tool for G900 http://rapidshare.com/files/101512976/RAW_NB0_XIP_TOOL.rar.html
RomKitchen http://rapidshare.com/files/101704280/RomKitchen_for_IPAQ_614c_WM6.0_18125_EN.rar.html .
Hi,
thanks for that. this is great !!!!!
I have a 61x prototype. And wanted to upgrade the rom. now as far as i know there are 2 parts which can be upgraded.
OS and firmware.
AFAIK the OS upgrade is fairly simple :
1. copy the files:
diagpdk.nb0
eboot.nb0
eboot_exp.nb0
ipl.nb0
uldr.nb0
xldrmdoc.nb0
and
flash.dio (which is the actual OS rom (diskimage_ver.nb0)
to a micro SD
boot the device + holding the lower left and top button.
It displays : SD flash
After some seconds the flash starts ... upgrading.
Reboot.
thats it.
First question. where do i get the other files from like eboot.nb0 ect.
I have an older version of these file, can I use them with the new image ?
2. The firmware (qualcomm)
You can use the qpst tool for that.
But now also the question. Is there a way to dump the qualcomm firmware of this device ? I also only have an older version.
BTW: the device also supports download os via USB and boot via USB KITL RNDIS.
But I have no clue how to use either.
I tried DNW.exe which detects the usb, and I can send files but I dont know at which offset address.
Thanks !
Hi,
I'm very gald geting reply from you.
I have used HTC/DOPOD's phone for many years. But It's first time to use HP's Phone. According to my Knowledge from HTC. we should flash the OS if we have valid diskimage_ver.nb0 and falshing tool. AS firmware, we have to wait for code from HP.
I saw the thread named 'Universal BootLoader Tool - Flash ANY valid rom to ANY iPAQ' In recent days. Following is link.
http://forum.brighthand.com/showthread.php?t=243984
If this tool can flash the diskimage_ver.nb0 without brick my phone. I think it's time to cook rom of 614c.
But I don't know if the IPAQ need to unlock CID. so I have wait for some one tell me know how.
Many thanks for your reply.
the ipaq 614 is not htc. but anyway the architecture is clear.
As mentioned flashing the os can be done by keycombination during boot + SD card.
I dont think the explained romupdate tools will work with the new device.
but anyway, someone finds the before mentioned nb0 files (like eboot.nb0 ect) useful I can upload them somewhere.
I flashed your downloaded image yesterday and it worked out well. but I still have the problem which is probably related to the firmware, that the screen stays dark when the WM os boots. but the OS works, you can use it, you can even make calls, but screen is dark.
I also have the old firmware files if someone can use them.
Thanks !
Dear SAXXON,
Can you tell me details about 'I flashed your downloaded image yesterday '? What tool did you use?
What's meaning 'you can even make calls, but screen is dark'?
Thanks a lot.
as described in this thread :
http://forum.xda-developers.com/showthread.php?t=374051
I flashed the rom with the "SD flash" key kombination .... (no extra tools needed)
I took my older *.nb0 files and replaced the diskimage*.nb0 file with yours.
It worked great. But I still have the problem which i had already before, which is related to the firmware, not to your OS rom. The problem is that the screen stays dark when booting the OS. but active sync works, when you press keys there is a sound, you can even take pictures.
So I am looking for a way to successfully install my older firmware for the qualcomm chipset ! I have the files but I dont know how to flash them properly. The SD flash function is only for the ROM I guess !
So if you have more resources ? information on how to flash the firmware for this device, would be great !!!
If you need a more detailed description on how to flash the rom let me know.
Thanks
i quess that if we cant find answers here we cant find them anywhere
the ipaq 614 is nothing without support
comon people help us out here
satiros
Friends, where can I get these file?
diagpdk.nb0
eboot.nb0
eboot_exp.nb0
ipl.nb0
uldr.nb0
xldrmdoc.nb0
and
flash.dio (which is the actual OS rom (diskimage_ver.nb0)
Li
Can someone post the entire files from rom dump, not only the OS but all the rest, Radio etc etc ?
Thanks !
I would really love to help because I would love to start doing things with my 614c.
What can I do to help?
New firmware
I went to HP service centre in my city last week to ask them to fix my GPS. Then the HP engineer flash my phone with the newest firmware. The flashing took about 40 minutes and about 5 firmwares were upgrade.
The firmware code from HP Asset Viewer are...
Version Tab:
Product Revision Level: 1.0
Rom Date: Feb182008
Rom Revision: MP-1.00.03
Bootloader Version: MP-1.01.00
XIP Version: 1.0.0.0
Camera Tab:
Hardware Driver Version: 0.0.3.0
Software Driver Version: D1.48.0
Software Version: 2.0.0.29
Bluetooth Tab:
Firmware Version: A05U
Driver Version: BCHS_WINCE_MOBILE_4_7_3
WLAN Tab:
Firmware Version: 9.70.3.18
Hardware Revision: 88W8686
Driver Version: 38.p28
GSM Tab:
Radio Firmware Version: M:MP-0082-030308
GPS Tab:
Driver Version: 1.0.0.0
Firmware Version: 4.0.70
Software Version: 1.0.0.0
I didn't note the version before upgrade so I don't know which parts were actually upgraded.
If you can find which firmwares are newer and you can tell me how to extract the firmware from my phone, I am willing to extract the firmware for you.
I think this is a very good phone. It just need a great rom to use with.
The firmware codes from my HP Asset Viewer are:
Version Tab:
Product Revision Level: 1.0
Rom Date: Jan292008
Rom Revision: MP-1.00.01
Bootloader Version: MP-1.00.01
XIP Version: 1.0.0.0
Camera Tab:
Hardware Revision: 0
Hardware Driver Version: 0.0.3.0
Software Driver Version: D1.48.0
Software Version: 2.0.0.29
Camera API Interface Version: 0.0.0.1
Bluetooth Tab:
Firmware Version: A05U
Hardware revision: BlueCore4ROM
Driver Version: BCHS_WINCE_MOBILE_4_7_3
Software Version: BCHS_WINCE_MOBILE_4_7_3
WLAN Tab:
Firmware Version: 9.70.3.18
Hardware Revision: 88W8686
Driver Version: 38.p28
GSM Tab:
Radio Firmware Version: M:MP-0077-140108
GPS Tab:
Revision Level: 0.0.0.0
Driver Version: 1.0.0.0
Firmware Version: 4.0.70
Software Version: 1.0.0.0
Looks like the GPS and Camera are unchanged from what I have. Others are different though. That would be awesome if you could get them off of there.
Can anybody tell me how to extract those firmwares from HP 612?
Yes I am interested too how to extract the firmware....
I know it is possible with the tools posted in the beginning of this rom kitchen thread.
Maybe someone has the time to do it.
infact the only file needed for now is the diskimage_ver.nb0 file.
please use the pdocread command as described.
how to enter the bootloader mode on ipaq 614? i have found link to chinese wm 6.1 rom for ipaq 614 here -> http://4pda.ru/forum/index.php?showtopic=79455 english(russian) rom is in development
see my posts on boot keys ...
WM 6.1 EN for ipaq 614 ,enjoy http://4pda.ru/forum/index.php?showtopic=79455
Z!L0G80 said:
WM 6.1 EN for ipaq 614 ,enjoy http://4pda.ru/forum/index.php?showtopic=79455
Click to expand...
Click to collapse
Any way to give us an English translation of the upgrade instructions? I used Babel Fish, but it's still unclear...
copy flash.dio to non SDHC micro card and use sdloader (see saxxon posts on boot keys)
Related
I believe I may have some files missing that are preventing my backpack from working properly.
Does anyone know anything about BPInsert.lnk
what it is, associated files/drivers and how i can get it on my xda2. I think i need it but i ain't got it.
Cheers, Shire
BPInsert
Yeah Bro I looked into the Windows directory but was unable to locate BPInsert.exe the application target for the BPInsert.lnk shortcut.
:?
Interesting.
I think the original version of the ROM (1.03) had this program, but in later versions they implemented it in a different way so that less programs would be run on start up. So it depends on which ROM version you have, 1.03 you need it, newer ROM I don't think you do!
re
Ahh Ok thanks that makes some sense as I do have a newer ROM, but doesn't solve my problem.
My phone details
ROM Version: 1.66.00WWE
ROM Date: 02/20/04
Radio Version: 1.10.00
Protocol Version: 1337.18
ExtROM Version: 1.66.209
Ok seems I need to change tac.........life just isn't fair lol
It may be that the CF card is not compatible with the Backpack, but I'm not gonna give up on this just yet.
Cheers, Shire
BPInsert
Unzip and place this in your /Windows/StartUp folder Bro.
please, can someone give me english rom for hp ipaq 6915? my device has next settings:
system operativ 5.1.195 built 14957.2.3.1
livello di revisione del prodotto 1.0
rom 06/22/06
rom 1.25.00. ITA
versione rom estesa N/A
Windows CE 5.1
bootloader: G.39
Versione XIP: 1.0.0.0
and if you'll give me the rom, please please give me the instructions too how to install it...thank you very much
HP hw6915 english rom needed
Please, can someone give me english rom for hp ipaq 6915 too?
My device has next settings:
rom 06/21/06
rom 1.24.00. FRA
Windows CE 5.1
bootloader: G.39
Versione XIP: 1.0.0.0
And if you'll give me the rom, please please give me the instructions too how to install it...
Thank you very much
[email protected]
ive got :
Product revision level : 1.0
ROM date : 06/12/06
ROM version : 1.21UK.00 ENG
Extended ROM version : N/A
OS version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
If anyone wants to explain how to get it off my device, then please let me know and ill give it a shot.
English ROM for hw6915
00SparX00 said:
Product revision level : 1.0
ROM date : 06/12/06
ROM version : 1.21UK.00 ENG
Extended ROM version : N/A
OS version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
If anyone wants to explain how to get it off my device, then please let me know and ill give it a shot.
Click to expand...
Click to collapse
Setup
- rename 'grab_it_xx.exe' to 'autorun.exe'
- create folder '2577' on your (empty) SD/MMC/Mini-SD card
- copy 'autorun.exe' to this folder
That's it for the "setup" )
Usage
Now every time, when you insert this card into PPC it will grab the ROM image and save it into root of the card as 'dump.bin'.
It will show you a tiny red progress bar at the very bottom of the screen.
Once done, it will beep the default sound.
Message boxes are only shown in case of error.
IMPORTANT NOTE (thanx MDAIIIuser)
YOU MUST NOT put it back into another device!!!
YOU MUST LOCK THE SD CARD FIRST!!!!!
or read the SD with card reader on your desktop PC.
Otherwise, you will rewrite the dump with your own ROM!!!!
This ROM dump file can be then further processed and converted to flashable formats.
Tool is here:http://forum.xda-developers.com/attachment.php?attachmentid=23564&d=1119937614
Then send or publish dump.bin file to all needes
-varix-
[email protected]
I just ripped the image from my 6955 and will upload it later tonight. Just wondering if it is possible to make a WM6 rom after disecting this and applying the useful bits to one of the WM6 updates for one of the HTC devices. Anyone have any information on this?
Hp Ipqt 6915 english rom needed
Does anybody can publish English ROM for iPaq hw6915? Info about grab is located above. May be somebody has link to this image on the ftp server?
-varix-
[email protected]
I tried but when I remove the memory card (after waiting about an hour) I get an error saying "Cannot create file". The file is a 128 MB file before I remove the card, but when I remove it...it becomes a 52 KB file which is corrupted.
Did You read card in the card reader? This method starts work any time when You put SD into iPaq.
-varix-
doesnt work
i tried grab_it_128_150.exe on a mini -sd but i got a non good dump.bin,
tried also grab_it_128_minisd_468.exe but that doesn't work at all,
a simple d2s command results in a screen thats stuck in cal cheksum,
any advise????
I used grab_it_128_150 on the 1Gb miniCD w/o any problems. No one grab_it_xxx except this does not work on the my hw6915.
I have uploaded dump.bon from english hw6519 here :
http://maloos.free.fr/dump.bin
Hoping it'll help..
I need french language by the way
varix said:
I used grab_it_128_150 on the 1Gb miniCD w/o any problems. No one grab_it_xxx except this does not work on the my hw6915.
Click to expand...
Click to collapse
rom dump
you rom real? after winrar 161 KB? work?
So what to do with this dump now ?
how to flash the English rom onto IPAQ hw6915
How do I flash the downloaded English rom onto my IPAQ hw6915?
Answers are greatly appreciated!
so, does someone has a little tutorial how to flash on hw6915, and an english rom? please
The obstacle is that HP so far has not released any rom update for the HW69xx, thus we do not have a valid rom to test. I suppose it can be done by the same method to flash a HW65xx, but it is quite risky to flash a dumped bin file, plus if anying goes wrong, we know little to do. I used to have a Tytn and the Tytn upgrading group has contributed so much that almost makes rom upgrading a piece of cake. So maybe it is because the 6900 user base is too small thus we do not have some talent programmer like POF,etc. , who may have opted for htc native devices.
Suggestion: either wait for HP to release some rom update for us to do some experience(sooner or later), OR SET UP A FUND TO BUY A 6900 FOR SOME SMART PROGRAMMER and setup a REWARD if one get it done. I think 6900 hardware wise is a really nice machine, but HP sucks on the software side. Too much room to be improved. Let alone WM6, where is AKU3???
The link is dead, can someone please send me or add a link for a hw6915 english rom as i bought one from ebay and its french , i am hopeing to change it to english
please help
mrking
I'm in need of the 6900 rom as well so please post a link to it.
I have attached a copy of an Ipaq HW6915 English ROM. I hope this helps.
http://rapidshare.com/files/46350136/Ipaq_HW69XX_ENG_ROM.rar.html
Hi All..
i have Big problem (i think)
My wallaby GSM error, so..i try to upgrade via SD., but not success.
Because my bootloader V.5.15, so...im to trying upgrade bootloader to Versi 6.xx
Anyone Please share tutorial upgrade bootloader and file Bootloader 6.xx
PS.Sory my english is bad
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/pnewbootloader.exe
maybe this can be of help
not much though unless you
know alot! about what your doing
so be warned could brick your device
hi Mod...
But no File to download from This Link Bos...
Try this one here:
http://www.romkitchen.de/tools/XDATools.zip
Stefan
Hi Lumpi...
I already Have this Tools...
and also Im folowing tutorial step by step from This Link
But Not success...i dont know, what Wrong....
Im Using SD Ardata 1GB and MMC Nokia 64MB.
I think the bootloader 5.17 not support this tools (But Im Not sure)
Maybe first time i need upgrade bootloader to V.6.xx
But i dont know how to Upgrade Bootloader and where i can download file Bootloader v6.xx
thanks for Your respon Mod...Sory My English is Bad
Cannot Downgrade Spv M2000
I have an SPV M2000 originally running on Windows Mobile 2003. Somehow I managed to upgrade it to Windows Mobile 6 Professional (Build 18125.0.4.2), but I am loosing Radio after some minutes and also Wifi. I reset the device and Sometimes It works other times Radio doesnt work at all. In Device Information I get Rom Version: 5.60.00 WWE, ROM Date: 03/02/05, RADIO version: NONE, PROTOCOL Version: NONE. ExtROM Version: (nothing written here). I can reset the device but it always give "communication error" when trying to downgrade etc. I'm really Desperate!!
Hi,
I have just got my phone from HTC support (i have sent it for repairs)
It seems that there is an update on the ROM from what i previously had, for example now my cellular supplier configuration is being identified and auto-configuration works
I want to replace this ROM with new NEW coocked ROM which probably are much better but i still would like to save the current ROM that is in my Cruise.
CAN anyone PLEASE guide me on how to extract the current ROM??
(the whole parts RADIO , ROM , Extention ....) because i know how to burn a new ROM but i have no idea on how to save a current one
Thanks A LOT .......
I wolud like to have auto configuration for Slovenian networks.
Can you extract you connection wizard (setup).
Thanks
can you please give us the info system of your rom ?
Start/settings/system/ about
Start/settings/system/ Device information
Thanks
gregy74 said:
I wolud like to have auto configuration for Slovenian networks.
Can you extract you connection wizard (setup).
Thanks
Click to expand...
Click to collapse
You must build any rom,and put diamond_connection setup as OEM package.
This package have operator's name around the world. - GSM
niars said:
You must build any rom,and put diamond_connection setup as OEM package.
This package have operator's name around the world. - GSM
Click to expand...
Click to collapse
Thanks
Do you maybe know where can I find connection setup from Diamond?
Phone versions
imfloflo said:
can you please give us the info system of your rom ?
Start/settings/system/ about
Start/settings/system/ Device information
Thanks
Click to expand...
Click to collapse
About:
-------
Windows Mobile 6 proffesional
CE OS 5.2.1623 (build 18129.0.4.5)
Device Info:
------------
ROM Version: 1.28.405.3 WWE
ROM Date: 03/05/08
Radio Version: 1.58.25.14
Protocol Version: 25.69.30.05H
About a month or two ago I was at the office and I went on the HTC WW site to see if there was an update for the firmware and there was! I wanted to wait and do it at home but forgot and now I can’t find it on their site. Did they ever release one or not?
I confused.
Somehow in June they had one for one or two days. I downloaded and installed but could no find any difference and the next day it was gone from their site. I didn't know the ROM of the original one but seems to me it was the same an got to their site by mistake.
Use How to dump HTC Kaiser ROM. Yolu can find it here:
http://forum.xda-developers.com/showthread.php?t=334680
Hello,
Firstly, I must say that I previously posted this thread on a wrong forum.
I am relatively new in this forum and also new in flashing a new ROM. I have a HTC p3300 with original WM6 which I bought some years back. So my PDA is open (not given by a telephone company).
Relevant Information
ROM Version: 3.13.405.1 WWE
ROM DATE: 8/28/07
Radio Version: 02.94.90
Protocol Version: 4.1.13.44
ExtROM Version: 3.13.405.102
I have tried to read how to upgrade from WM6 to WM6.5 or any other good ROM, but the more I read the more I get confused.
Please can someone give me a useful guideline on;
Where to get a WM6.5 or any other good, light and tested ROM (English Version)
How to flash a new ROM
I will be very grateful for any useful advice.
Thanks,
Jonat
jonat said:
Hello,
Firstly, I must say that I previously posted this thread on a wrong forum.
I am relatively new in this forum and also new in flashing a new ROM. I have a HTC p3300 with original WM6 which I bought some years back. So my PDA is open (not given by a telephone company).
Relevant Information
ROM Version: 3.13.405.1 WWE
ROM DATE: 8/28/07
Radio Version: 02.94.90
Protocol Version: 4.1.13.44
ExtROM Version: 3.13.405.102
I have tried to read how to upgrade from WM6 to WM6.5 or any other good ROM, but the more I read the more I get confused.
Please can someone give me a useful guideline on;
Where to get a WM6.5 or any other good, light and tested ROM (English Version)
How to flash a new ROM
I will be very grateful for any useful advice.
Thanks,
Jonat
Click to expand...
Click to collapse
Hi,
for the guide: link
can you try using the latest of Shady313, I haven't try it, but he is a good cook : link
Bye,
Silvio
tnw513 said:
Hi,
for the guide: link
can you try using the latest of Shady313, I haven't try it, but he is a good cook : link
Bye,
Silvio
Click to expand...
Click to collapse
Hello,
Thanks for your message. I tried to follow the procedure as stated in the USPL documentation but along the line, I got an error, " Error 260" No connection between my computer and my PDA. I got to the stage (interface) where I can flash a new version of USPL on my device then the error appeared. I had a good established connection between the two devices before the error appeared.
So, what can be the problem? I am using Windows Vista.
Regards,
Jonat
jonat said:
Hello,
Thanks for your message. I tried to follow the procedure as stated in the USPL documentation but along the line, I got an error, " Error 260" No connection between my computer and my PDA. I got to the stage (interface) where I can flash a new version of USPL on my device then the error appeared. I had a good established connection between the two devices before the error appeared.
So, what can be the problem? I am using Windows Vista.
Regards,
Jonat
Click to expand...
Click to collapse
the problem is probably Vista...
See that in that case: --> link
Bye,
Silvio