Database Users

SD-Card not recognized after android-installation

Hello!
I just installed "Android 2.1 (Eclair) On HTC [27 Jun 2010] (V2.5a)" and got the "waiting for SDCard"-message.
After adding "msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave" it worked perfectly and I was able to start android.
After starting the photoalbum I restarted the phone to windows - but my sd-card wasn't recognized anymore
If I re-insert the card, it's there for about a second and then it's gone again...
I don't want to say that it has something to do with the installation of android, but it's kind of obvious, isn't it?

Format it with the hp tool (HP USB Disk Storage Format Tool) then try to reinstall Android.

The sd-card isn't even recognized by an extern sdhc-cardreader.
So I think it's dead.
How is that possible?

yup, it happened to me too, and i think that it does have to do with android
here is my fix:
set blackstone in card reader mode
remove the card from blackstone
connect blackstone to pc
prepare a command prompt window in windows and type format x: /q but do not press enter yet (x is the letter wich windows will alocate for card when connected)
insert the card into blackstone and fastly press enter on the earlier typed command (the card only stays visible for a second or two)
sometimes you can recover some of the files from the card with some undelete program

hmm, the problem is: my blackstone switches to activesync-mode automatically if there's no sd card present...

ok, got card reader mode working, but formatting fails due to an IOCTL error

try again, i may not remember the operations exactly but i got it fixed and i had exactly the same problem,
anyway, the ideea is important and not my tutorial exactly, the ideea is that card is formatable from windows in the first few seconds when it is visible in blackstone,
edit: i may also used wm5torage for this operation, try it too

Have the same problem... SD-card isn't recognized anymore by my Blackstone
Going to try the hints in this thread

hi,
my 16 gb sandisk card broke a while ago while trying android on my blackstone.
The phone sees the card only for like 5 seconds, same happens when plugging it to the computer.
In the card reader the drive shows up, but i cant do anything with it.
I have tried soo many things:
Tried the panasonic. hp and sd formatter
From the phone, tried flash format, storagetools, pocket mechanic
Also combined it with cardexport or wm5torage
Today i found out the drive stays available while connected to the card reader, im downloading a couple of partition managers, will report back.
Anyone successfully fixed their sd card?
EDIT
I put my card in a couple of compact camera's, one camera could format the card and it started working.

I bought a new sd card now
But i will try to format the old one with a camera, that's a very good idea!

Okay, formating with a camera actually worked!!
Thank you!

[Q] Can't format my sd card!

So about a week ago I downloaded new version of icecream tosti's ICS rom (v0.6) and booted into CWM to mount my sd card and move the zip file over. I noticed that it was taking longer time to move the file than it usually does but I let the process finish. I unmounted the card and went to install the zip from sd card but couldn't find it. I tried to move the file again and again but couldn't get it to copy the file onto the sd card. I tried moving files from the sd card onto the computer but that was not possible either. It wouldn't show me errors and complete the moving process but it actually didn't move anything. I thought there was something wrong with the sd card so I tried formatting it... no success!
I have used easues partition manager, mini tool partition manager, hp sd card utility, panasoic sd card formatter, tried formatting it through windows native options, used disk management, even tried formatting it through CWM but i kept on getting the same error, can't format. I was placing the micro sd card in a usb card reader and sd card reader in order to format it through computer. I have also tried using different computers but that didn't solve the issue. The problem is that every time I try to install a rom it reverts back to an older revision of the rom with old settings that I set before. It seems to me some how the sd card is locked in a previous state and it is write protected and won't let me format it.
Does anyone have any ideas on how I can solve my problem or does this mean the sd card is gone and I have to buy a new one?

I have exactly the same problem after using NexusHD2-ICS-4.0.3-CM9 V1.3. It seems this sd card was frozen, nothing on it can be changed. If I copy a file to it on computer, it shows copy successful, but that file cannot be read, and if refresh it shows nothing have changed in the SD card.
Anyone have any idea about this?
I have three broken micro sd cards now, two from WP7 and this one from ICS.

pacman1891 said:
I have exactly the same problem after using NexusHD2-ICS-4.0.3-CM9 V1.3. It seems this sd card was frozen, nothing on it can be changed. If I copy a file to it on computer, it shows copy successful, but that file cannot be read, and if refresh it shows nothing have changed in the SD card.
Anyone have any idea about this?
I have three broken micro sd cards now, two from WP7 and this one from ICS.
Click to expand...
Click to collapse
I waited a couple of weeks for someone to answer on this forum and tried all methods possible to format the sd card or revive it somehow but no luck so just recently purchased a new sandisk class 4 sd card hopefully this one doesn't go bad either. I just wish I knew why it was happening so I don't repeat the process again and end up damaging the card.

Have you tried to format with MAGLDR and after it on windows 7 pc ?

I did that, also followed this post:
http://forum.xda-developers.com/showthread.php?t=1283232
Contents on this sd card just refuse to change.

is there a solution to this coz im having the same problem and cant find a way to fix this

you can do it by this software's :
HDD Low Level Format Tool
MiniTool Partition Wizard
EASEUS Partition Master
Partition Wizard Home Edition
.
.
.
.
but i dont know how create swap and ext4 partitions on sd .

This happen because you formatted the card on the phone. I never recommend to format on the phone the cards but on PC. Try the application I posted on computer with FAT32 in 32768 unit size.

Can't format my sd card

Hey guys so I tried installing Icecream Tosti's ICS rom v0.6 but it after booting up I saw that the previous version (o.5) was still on the the phone and all my settings and stuff were still there. I had done a fresh install and was confused. So I tried again but it didn't work and when I tried formatting my sd card it wouldn't let me.
I have tried many different tools: Mini tool partition manager, easeus partition manager, hp sd card utility, panasonic sd card formatter, and windows disk management but I kept on getting the errors, can't format. I plugged in the sd card into the computer via a sd card reader and a usb sd reader and even tried different computers but the same error popped up.
Just recently I booted into the rom and plugged in the phone through the usb cable. When I formatted using some of the tools above it showed me the format process was completed, but when I unplugged the phone and rebooted the phone the sd card reverted back to its original state and the sd card was not erased.
Does anyone have any ideas how to fix it? or is my sd card completely gone. I feel like it is just locked and write protected but I don't know how to unlock it since there is no switch on the side. I will really appreciate. Thanks in advance.

No SD Card detected however .. (please help)

Hi,
(Strange problem - OS does not detect SD Card however Bootloader does and loads ROM from SD Card)
I have a strange problem from this morning. I had WP7 mango installed which was working pretty ok apart from a few restarts if the bottom part of phone got warm/hot, so I kept it in from of AC (This idea usually works with HD2)
This morning, WP7 gave an error saying it can not detect the 16 GIG SD Card, I reformatted SD Card using Nokia phone/FAT32 and re-installed WP7 however it gave a message saying No Storage Card present.
I have also tried installing WM6.5 but that too doesnt not detect SD Card.
On top of above, strange thing is that I have installed 3 different version on WM6.5 stock ROM using SD Card method (pressing VolDn methos while powering phone up to boot load ROM from SD Card) and it works perfectly fine however the OS does not detect SD Card.
Has any body faced this problem and have a solution?
Or does any body know of a solution to this problem?
Thanks in advance,
Ash.

a54i54 said:
Hi,
(Strange problem - OS does not detect SD Card however Bootloader does and loads ROM from SD Card)
I have a strange problem from this morning. I had WP7 mango installed which was working pretty ok apart from a few restarts if the bottom part of phone got warm/hot, so I kept it in from of AC (This idea usually works with HD2)
This morning, WP7 gave an error saying it can not detect the 16 GIG SD Card, I reformatted SD Card using Nokia phone/FAT32 and re-installed WP7 however it gave a message saying No Storage Card present.
I have also tried installing WM6.5 but that too doesnt not detect SD Card.
On top of above, strange thing is that I have installed 3 different version on WM6.5 stock ROM using SD Card method (pressing VolDn methos while powering phone up to boot load ROM from SD Card) and it works perfectly fine however the OS does not detect SD Card.
Has any body faced this problem and have a solution?
Or does any body know of a solution to this problem?
Thanks in advance,
Ash.
Click to expand...
Click to collapse
further to add, i have tried 2 sd cards 4gb and 16 gb. WM6.5 says no SD Card present however the WM6.5 and all of software (ROM, Radio, Splash etc) were loaded/installed using LEOIMG.nbh on 16gb SD Card.
I have searched the forum as well as other sites, and have tried re-formatting sd card as well to no luck.
Please help, if you have any idea of whats wrong.
Cheers,
Ash

no one ?

a54i54 said:
no one ?
Click to expand...
Click to collapse
We're all too surprised you managed to flash using a 16gb SD card.,,, normally anything 8gb or larger won't flash nbh files, so your problem is pretty strange.

I lost the shipped 8GB SD card more than year back and since then I am using 16GB SD card with HD2 and it worked perfectly.
Does OS like WP7/WM6.5 uses mount in some way to have card and contents available? If so, can it be mounted using MAGLDR or CWM, since the bootloader which IPL can read the SD Card.
Cheers,
Ash

indeed this is a baffling problem. can't think of conclusive reasons why the tri-color bootloader can see the sd card but OS (WM6.5, WP7, Android) cannot!
i am assuming you have just ONE partition on the sd card...? can you check and tell us the format of the filesystem, i.e. FAT or FAT32...? i think FAT isn't even possible on a 16GB card...it will likely be formatted as FAT32, but lets check to be sure.

Hi ASCIIker,
Many thanks for your response, the SD Card is FAT32 formatted. I have tried both 4gb and 16gb cards but WM6.5 says No Card found.
See screen shots attached. I have also attached screen shot of version showing Stock ROM flashed earlier today using SD Card.
I am not too sure, could it be some thing like mounting of SD Card under these OS's or under SPL which is not able to mount these SD Cards,
The problem started when phone was running WP7 Mango 8107 but it used to crash if it got hot and re-boot on its own, may e one of those automatic re-boots, the OS unmounted Sd card. When I looked at it in the morning, it was showing an error message of no storage card present and the options available were emergency call and shut down. I tried re-booting it 1-2 times and it still showed same message and then I tried loading WM6.5 from SD Card using LEOIMG.nbh which worked and left me confused.
I have also tried USB Mass Storage option of MAGLDR 1.13 however that doesn't work either.
I have never used CLk but I can try that if there is a way to access SD Card using USB with it.
Any suggestions for reviving it back are welcome.
Cheers,
Ash

a54i54 said:
Hi ASCIIker,
Many thanks for your response, the SD Card is FAT32 formatted. I have tried both 4gb and 16gb cards but WM6.5 says No Card found.
See screen shots attached. I have also attached screen shot of version showing Stock ROM flashed earlier today using SD Card.
I am not too sure, could it be some thing like mounting of SD Card under these OS's or under SPL which is not able to mount these SD Cards,
The problem started when phone was running WP7 Mango 8107 but it used to crash if it got hot and re-boot on its own, may e one of those automatic re-boots, the OS unmounted Sd card. When I looked at it in the morning, it was showing an error message of no storage card present and the options available were emergency call and shut down. I tried re-booting it 1-2 times and it still showed same message and then I tried loading WM6.5 from SD Card using LEOIMG.nbh which worked and left me confused.
I have also tried USB Mass Storage option of MAGLDR 1.13 however that doesn't work either.
I have never used CLk but I can try that if there is a way to access SD Card using USB with it.
Any suggestions for reviving it back are welcome.
Cheers,
Ash
Click to expand...
Click to collapse
It is worth a shot but i suspect you it still will not detect the SD card. Just click on the HD2 guide in my sig and scroll down to post #3 and look for the section "Updated version of clk with CWM built in" and click on the link that takes you to the download of that version. Then the bottom of post #1 and read the section "Flashing cLK via SD card". This will have clk with Clockwork Mod installed on your device. Then boot your device and hold down the home button at the same time, this will boot you into CWM and theb select "Mounts and storage" then select"mount USB storage". If you do not see the contents of your SD card on your computer then it is not working. Make sure to try "install zip from sdcard" as well. Just see if it reads the SD card that way.
Also I take it from your posts that you have tried otion #4 USB Mass storage in MAGLDR. So like I said I doubt CWM will see it in mass storage either.
Seeing as WP7 uses the SD card for the internal memory and is constantly using the SD card reader on the device at high speeds. It may just be a case of the SD card reader not being operable with the OS anymore. I mean it has to work at a certain speed level I think for the OS to be able to use it, and maybe the bootloader does not require that same speed. Or it may just be a case of the reader not being able to mount the SD card as read and write both still so it just will not mount it. Like I said these are just shots in the dark. But if it is a problem with it mounting in either read or write it could cause this problem I beleive.

Hi T-Macgnolia, thank you for this detailed reply. I was able to install CLK using SD Card method however it does not recognize SD Card nor does it mount it. It shows an error message - see attached screen shot.
I was wondering if a faster SD Card like Class 6 8 GB would make any difference to current state.
Cheers,
Ash

a54i54 said:
i have tried 2 sd cards 4gb and 16 gb.
Click to expand...
Click to collapse
a54i54 said:
I was wondering if a faster SD Card like Class 6 8 GB would make any difference to current state.
Click to expand...
Click to collapse
if you're getting the same behaviour with all your cards, then its likely to be a problem with the phone, and messing with this class of that sized card is probably a dead end. (thats not to say you shouldnt try if you have cards available, of course!)
To my mind its gotta be one of two things
1 - some problem with the sd controller, that is allowing low level access to the card, so flashing works, but not allowing the higher level drivers full speed access to the card, in much the same way that a PC accesses the hard disk much faster during a normal boot than it does with a 'safe mode' boot.
2 - a virus/glitch/witchcraft/wp7/other has corrupted all your sd cards in some fashion.
Just guesses, of course.
Good luck.

a54i54 said:
Hi T-Macgnolia, thank you for this detailed reply. I was able to install CLK using SD Card method however it does not recognize SD Card nor does it mount it. It shows an error message - see attached screen shot.
I was wondering if a faster SD Card like Class 6 8 GB would make any difference to current state.
Cheers,
Ash
Click to expand...
Click to collapse
I agree with Samsamuel completely, it seemsit is something wrong with the SD card reader/controller that is not letting it read the SD card at a higher speed. Or something really strange and funky has happened to all of your SD cards. But I feel it is the first thing and not the later. If you want to try another SD card, as odd as it sounds, I suggest you try a lower class SD card like a class 2 if you can find on. But then again you may already have one and already tried it I do not know. One thing for sure it seems like a hardware issue and not a software or faulty SD card issue.

I had this exact same problem, in the end I ended up going back to original leo Winmo 6.5, then starting over with HSPL - Magldr - CWM - Android (though I guess WP7 will work too).
I don't know what caused the problem, I just put all these anomalies down to the bad nand blocks on my device.
I'll also note that mass storage in Magldr has never worked for me and still doesn't, the drive mounts but crashes on transfer of any files, but within CWM and Android it works now.
If you have exhausted all other options and have not already tried this then it maybe worth a shot. Good luck.

Thanks michael-jb,
I have tried all these options. I have tried installing different WP7 again though, which I will do tomorrow or day after.
Cheers,
Ash

"Inserted SD card unavailable" after Pie update

Hello.
Recently updated to Android 9 OTA and removed MicroSD card to backup files on PC. The handset doesn't work with MicroSd cards since then Tried different cards, formatting them exFAT on PC. The built in android formatting tool doesn't work. Starts at 20% and stays that way. When it says done it goes back to saying that SD card needs formatting. Any suggestions?

User X said:
Hello.
Recently updated to Android 9 OTA and removed MicroSD card to backup files on PC. The handset doesn't work with MicroSd cards since then Tried different cards, formatting them exFAT on PC. The built in android formatting tool doesn't work. Starts at 20% and stays that way. When it says done it goes back to saying that SD card needs formatting. Any suggestions?
Click to expand...
Click to collapse
It maybe the card or the card reader. Have you can format the SD card on your computer? If it worked then it's probably the reader. You be could try vold magisk module but honestly it's probably a hardware failure rather than software issue. Maybe try to get compressed air to clean out the reader. Only other thing you could try is install the update again... Could have been install issue. So try the install again. One last thing here if the card works on computer you can use ADB push to push the apps or data onto the phone. All the info for any of this is available with a search please try to use next time it if you didn't this time. For all but ADB walkthrough just read top ten in this guide area.