SD-Card not recognized after android-installation - Touch HD General

Hello!
I just installed "Android 2.1 (Eclair) On HTC [27 Jun 2010] (V2.5a)" and got the "waiting for SDCard"-message.
After adding "msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave" it worked perfectly and I was able to start android.
After starting the photoalbum I restarted the phone to windows - but my sd-card wasn't recognized anymore
If I re-insert the card, it's there for about a second and then it's gone again...
I don't want to say that it has something to do with the installation of android, but it's kind of obvious, isn't it?

Format it with the hp tool (HP USB Disk Storage Format Tool) then try to reinstall Android.

The sd-card isn't even recognized by an extern sdhc-cardreader.
So I think it's dead.
How is that possible?

yup, it happened to me too, and i think that it does have to do with android
here is my fix:
set blackstone in card reader mode
remove the card from blackstone
connect blackstone to pc
prepare a command prompt window in windows and type format x: /q but do not press enter yet (x is the letter wich windows will alocate for card when connected)
insert the card into blackstone and fastly press enter on the earlier typed command (the card only stays visible for a second or two)
sometimes you can recover some of the files from the card with some undelete program

hmm, the problem is: my blackstone switches to activesync-mode automatically if there's no sd card present...

ok, got card reader mode working, but formatting fails due to an IOCTL error

try again, i may not remember the operations exactly but i got it fixed and i had exactly the same problem,
anyway, the ideea is important and not my tutorial exactly, the ideea is that card is formatable from windows in the first few seconds when it is visible in blackstone,
edit: i may also used wm5torage for this operation, try it too

Have the same problem... SD-card isn't recognized anymore by my Blackstone
Going to try the hints in this thread

hi,
my 16 gb sandisk card broke a while ago while trying android on my blackstone.
The phone sees the card only for like 5 seconds, same happens when plugging it to the computer.
In the card reader the drive shows up, but i cant do anything with it.
I have tried soo many things:
Tried the panasonic. hp and sd formatter
From the phone, tried flash format, storagetools, pocket mechanic
Also combined it with cardexport or wm5torage
Today i found out the drive stays available while connected to the card reader, im downloading a couple of partition managers, will report back.
Anyone successfully fixed their sd card?
EDIT
I put my card in a couple of compact camera's, one camera could format the card and it started working.

I bought a new sd card now
But i will try to format the old one with a camera, that's a very good idea!

Okay, formating with a camera actually worked!!
Thank you!

Related

Help SD card Problem

Hello! Although this is my first post on the forums, I have been reading extensively through these forums for the past ferw weeks since my acquisition of my new to me MDA (i.e wizard G3). Yesterday, I took out the sd card for a few hours and now when I put the card back in the wizard is not recognizing the sd card in the file explorer. I put the card in the PC and it is recognized fine there. I reformatted the sd card via FAT and inserted it back into the wizard but no luck. I soft reset the phone several times but in vain. I then eventually hard reset the wizard and THEN inserted the sd card but still not read. I tried going through the My computer--> Manage --> Disk Management but the sd card is not showing up on it.
The sd card is clicking in and out fine from the wizard. Any help would be greatly appreciated. All my medical programs were on the SD card. And with that many programs I cant just work off of the memory.
Thanks in advance
Sohaib
update
I installed the wm5storage and the program does not recognize the sd card either
Update
-Tried formatting to FAT with computer and re inserting did not work
-Tried Formatting with WM5storage and THAT didnt work either
-CID unlocked the phone, installed 3.08 ROM, and then "Crossbow reloaded" with 2,19 UK Radio Rom, tried inserting the sd card and still not work
-Tried formatting with "Flash Format" and the program says "no storage card detected"
I am thinking that I may have damaged the pins or something when I was reinserting the SD card, initially when I noticed the problem
2 options in front of me now!
1. buy another mini SD card and see if that works
2. Open up the Wizard to see if it is a hardware issue
Opinions etc would be greatly appreciated
thanks
sohaib
Ive got the same problem with my Qtek 9100
hi i had a near identical problem occur with my xda mini, as in after removing and reinserting my sd card it was not being recognized. i happened to have a old mini sd card (only 64mb tho!) and that was recognized. so i just bought another 2gb sd and its been fine ever since, but saying that i have not removed it from my mini yet! which is getting a little annoying now as i was given a copilot kit and the software is on a mini sd card
Try removing all formatting and then allow the phone to format your card. I had a problem with my second MiniSD card after formatting on my PC.
Insert your card into your card reader. Right click "My Computer" and click on "Manage". Then left click "Disk Management", find your card and delete the partition. At this point, you can then stick the card into the phone and it will ask if you would like to format the card. Even though the computer will not recognize the card, your phone will.
Snapin Disabled
I tried the approach of right click my computer--> manage --> disk management --> but it tells me that the snappin is disabled and when I go into start--> run--> gpedit.msc --> to enable the disk management it still does not recognize my storage card in the disk management. Hence I am unable to remove the partition.
Thanks for the replies guys, any suggestions on how to enable the specific snapin on XP?
Thanks
Sohaib
New Mini SD Card
OK, so in attempts to diagnose the problem, I went out today and purchased another 1gb minisd card, inserted it into the wizard and................NOTHING. Still no luck. Does this narrow down to the problem to a hardware pin related issue? Or could this still be a software problem. I figured that a new sd card may resolve the issue but unfortunately not, any suggestions would be greatly appreciated.
Thanks
Sohaib
Bump
Ideas? Suggestions? Recommendations?
Thanks in advance
Sohaib
If you tried another card and a new ROM, I would say it is a hardware issue, if it's still under warrantee then I would send it in. If it's not and you want to try to fix it yourself, there is the HTC wizard maintenance manual (Google search) that will give you step by step instructions on how to disassemble it. Or sell it on eBay then use the money to buy a new one.

SD Card not being recognized

I just noticed that my phone is not seeing the MicroSD card in the system.
I have reseated the card and soft reset the phone so far, but cannot get the card to be seen again.
I was able to transfer some files to the card this morning so something must have happened after the transfer...
Anyone else see this problem?
I guess this has been moved here, so I'll mention this is the T-Mo US version. Stock ROM
Same issue...
I Have had the same issue... Figured it out when I wanted to run an app that was installed on my sd card... Had to Take out card, put it back and reboot the phone. If it happens again, will be taking phone back to T-Mobile to have them take care of issue.
Yea, that def. doesnt sound like how it's intended to be...
The card mounts in Windows, while its in the phone and I can transfer to it, but cant be viewed on the phone.
Conquest said:
Yea, that def. doesnt sound like how it's intended to be...
The card mounts in Windows, while its in the phone and I can transfer to it, but cant be viewed on the phone.
Click to expand...
Click to collapse
Check that you haven't got a 2nd 'Storage Card2' in the phone root folder - This sometimes happens if you try to reference the card while it isn't installed - another 'Storage Card' is generated.
If so, use file explorer, gsfinder or Total Commander to find your (correct) card and delete the temporary one.
HTH
Also Unable to Read SD Card
I am having a similar issue. Got my HD2 (TMO US, stock ROM) on launch day, SD card wasn't recognized starting last night. The phone asks me to format the SD card after a soft reset. When I connect to the PC via USB in Disk Drive mode, as soon as I try to explore the SD card the PC asks me to format it. Programs that I have installed to the storage card show up with a generic icon and do not start.
Maybe those of you having problems can provide some additional info about any changes to your device, and we may find something in common. Here's what I can think of that's associated with my phone:
- Customizations with BsB Tweaks and HD2Tweak (tried backing out the FAT cache settings already and resetting, card is still not recognized)
- A small number of manual registry changes which I can't verify because, of course, I wrote the backup files to the SD card *facepalm*
- Cookie's Home Tab
- Some additional games, Google Maps, Google Mobile App, Total Commander, PHM RegEdit, a few other random apps from O!Market
I also have Pointsec encryption on my laptop, which is notorious for trying to grab a hold of removable media and "protect" it.
My SD Card just showed up.
I had made no changes to the ROM at all. Completely stock, no CABs installed.
Since then I have installed some registry tweaks and some apps.
But thats my giving to a solution, which is nothing lol..
I have noticed however, that when the phone is mounted to my PC and Im in the folder, I cant browse to the SD Card on the phone...
Anyone else see that?
I believe I know the problem. IT happened to me several times, until I unplugged the USB cable, then the SD card magically appeared again.
When ever the phone is tethered, or connected to USB, the SD card is not vissible on the phone via file manager.
It should be visible via the laptop or PC explorer
Card Now Visible
I did have to format my storage card to get it to be recognized by the HD2. In case anyone else runs into the same problem, here are the steps I followed:
- Removed microSD card from device, put in adapter, and attached to computer
- Used TestDisk (www[.]cgsecurity[.]org/wiki/TestDisk) to view the data on the drive. I was able to recover all of the files and directories.
- Copied the recovered files to my computer's hard drive
- Removed microSD card from computer, put in phone, and allowed phone to format when the dialog box appeared
- Removed card from phone, attached to computer, copied recovered files to card
- Put card in phone and soft reset
Hopefully this helps someone out who runs into a similar problem.
Thanks for the above post - that definitely helped me this morning as I thought my storage card had stopped working.
Seems daft when you plug in the USB cable from PC that phone then shows storage card as not installed.

SD card vanished

Help suddenly I cannot see my memory card and most of my apps on on it.
Coltrane23 said:
Help suddenly I cannot see my memory card and most of my apps on on it.
Click to expand...
Click to collapse
same problem here... hmmmm.. please htc.. do something
try a soft reset.
are you on a VF uk phone?
Got the same problem last week.
I find out the memory card got corrupted. dont know why.
XP didnt seen the card in reader at all.
Vista helped me to format the card, but i lost all my data, as i have to do full format to get the card live again.
Yes tried that. Yes on Vodafone but using laurentius26's Ultimate Rom which I believe is based on a T-Moile rom. I have been using this for some months without issue.
How do you format a memory card that can't be seen?
when you open file explorer can you see it there
or has it dissapeared from that too?
File Explorer will not open so soft reset now it opens but whole startup process now quite slow.Storage card indicated ...tap on it get inbox .mstxxx so email I guess and Temp folder containing cookies, History and temp int files. Thats my lot.
This is a common problem. Try removing the memory card, soft resetting then delete the folder "Storage Card" or "Storage Card2" if it exists. Reset again and insert memory card.
This problem occurs when the storage card is mounted on a PC (Disk Drive mode) and an application such as email tries to write to it. Windows decides the folder (as the storage card is mounted as a folder) has been deleted, so re-creates it. When the memory card is unmounted from the PC, windows has to call it something other than "Storage Card" as that name has now been allocated to a folder.
If that is not the problem, put the card into a PC and see if it recognizes it. It might say "this card is not formatted" etc. in which case you need to reformat and lose all of the data on it
the_sikko is quite correct the same thing happened to me last week. I simply re-connected to the pc and deleted the newly created 'storage card' and that resolved my problem.
I did notice a folder called Storage card earlier on now after numerous resets it's gone. I have also reset back to factory settings. Each time I reinsert the card Windows Mobile Device centre shows me the memory card (although my phone indicates no sd card loaded etc.) but when I try to access it, it disappears!
Try increasing the timeout that allows your storage card to be detected when the device is booting or coming out from suspension.
These registry edits worked for me:
[HKLM\System\StorageManager]
“PNPUnloadDelay“=dword:8196
[HKLM\System\StorageManager]
“PNPWaitIODelay“=dword:8196
Also, you may want to disable the power management on your storage card with:
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
“DisablePowerManagement“=dword:00000001
Hope this helps
Ok now I will have to learn wo to edit my registry
So without having to edit my registry I managed to grab the file that said Storage card but when I tried to delete (with the card still inserted) it I'm told Access is denied and I should check the card is not write -protected or currently in use. When I try to open it it simply disappears. If I try to delete it with the card removed I get Cannot delete "mxip_notify":There has been a sharing violation. The source or destination file may be in use.
Any suggestions?
Could really do with some help here cos I'm well and truelly lost in terms of what my options are.
Coltrane23 said:
Could really do with some help here cos I'm well and truelly lost in terms of what my options are.
Click to expand...
Click to collapse
I literally just had this issue. I have two Kingston 4GB cards and one of them simply stopped working. I wasn't able to copy anything from the mSD card to my laptop, so have simply formatted the card and now it no longer shows up in Windows Explorer (Windows 7).
Now i'm using the other card. I can tell by the way this card is responding in the HD2 that the other card became corrupt. I have just ordered two Transcend 8GB mSD cards from eBay for about £30.
I downloaded a tiny piece of software which is supposed to bypass Windows Explorer limitations and force format SD cards...but it won't work because the card just doesn't show to the laptop.
Well in the end I put the SD card into the card slot of a PC and after a very very long time I managed to format the card. All is well now.
my card got corrupted too
maybe i know the answer..
sorry for my bad english..
I've the same problem. But searching from all forums, finally i get the answer. just find n download EASEUS Data Recovery Wizard Proffessional 4.3.6 (for 5 MB). Insert the mmc in card reader, use this software to recovery all the missing file (choose Complete Recovery Option). After recovery process done, use software LLFTool (for 600kb, just doing some browsing at google) to Low Level Format the mmc (this LLFTool can recognize the mmc). After all done, Windows can recognize again the mmc at windows explorer. Just right click and choose quick format (format FAT32). Done.
Had to Hard Reset
Just to add my two pennies worth.
None of the above worked for me. In the end I had to Hard Reset. Harrumph!

[Q]How to make SD card ready for WP7?

Hi,
I have Sandisk 2gb SD card which comes with hd2, i installed WP7 but it seems that WP7 can not recognize my SD because when i put SD in my computer nothing is changed in my SD even i tested it, I put some files in SD and reinstall WP7 so as far as i understand wp7 has to format my SD put its specific partition but guess what nothing is changed in my SD even that files remain in the same place...
So i tried to format SD my self with FAT32 and FAT and even i delete my SD partition and none of them make WP7 format and make partitions on my SD card...
P.S-1 My SD card is working i tested it wit my computer by formatting copy some files there so read and write is ok.
P.S-2 WP7 booted correctly in this situation i mean when SD is in device the only problem i have is WIFI can not find any router when SD is in device, when i took it out wifi start working, why i'm saying this because i aware of compatibility issue of WP7 with some SD cards where it reboots if it is not compatible .
same thing happens to me, I am now trying to reinstall (again) wp7, and it seems it got stuck at the DFT screen..... previously it booted almost inmediately. maybe it is partitioning it?, for those of you guys that sd card works, wp7 boots inmidiately?
Yeah SD cards makes crash wifi !
And i cannot use it... Flash WP7 with formated SD cards NTFS but still doesn't works !
First time i istalled WP7 without SD card and when i afterward inserted card nothing was changed. Then i made Factory Reset from Settings menu and my phone started to restart over and over from point where DFT banner shws first time after loader. Then i went to the loader and as i can remember then i re-selected preferred boot source and then for me all was good. Now it show 1.6GB free space with my original HD2 SD card.
i am having axactly the same trouble. i have a san disk 2 gb too. it'll be enough for me but wp7 does not recognize it. i installed both sd-card inserted and sd-card not inserted. i booted with sd-cad and without sd-card. i tried every posibility but no result
reserved space is %95 on zune and it tells me there is no disk space. so i cant start using it full functionally and it makes me really sad
any help is appreciated. thanks.
Pisisuli said:
...
and my phone started to restart over and over from point where DFT banner shws first time after loader.
...
Click to expand...
Click to collapse
that's exactly what mine did!
...
Then i went to the loader and as i can remember then i re-selected preferred boot source and then for me all was good.
...
Click to expand...
Click to collapse
how did you do that? can you provide a short 1,2,3 step- tut to me? thx in adv.!
Same here my 2Gb card is only showing 15 mb of available space and I cant even transfer music or install any apps. can some pls help me
thanks
I just went to
setting and then soft reset ... and I couldn't go to loader I don;t know why !!
then I lost every thing even the unlock ...
and in the finally i found just 997 mb !!!!!!!!!!!!!!!!
jessesam said:
Same here my 2Gb card is only showing 15 mb of available space and I cant even transfer music or install any apps. can some pls help me
thanks
Click to expand...
Click to collapse
I have exact the same problem.. i found some sort of "solution". but it is a bit strange. when I pull out the sd card, boot my phone in magldr, insert my sd card and boot wp7, It shows the normal storage instead of the 15 mb.
but when I try a normal reboot without going to magldr, its going back to the 15 mb. and when I try to sync my phone with zune,(with the put-sdcard-in-phone-when-in-magldr-solution) everything goes slow.
Dont know if you (or someone else) already found a "good" solution?
greetz
all of you guys have an incompatible SD card, sorry guys, will need to buy a new one, its a bit of a lottery as that too might not work and dispite what some on here say its impossible to recomend anything.
only advice i can give is get a card that class 2 or 4 and dont spend money on a card that you may end up using for a tiny paperwight
is my sd card gone?
After I successfully flash WM7, I juz realize that my pc not recognize my sd card when i connect my phone to d computer. First, i thought becoz of some bug of wm7 so i try to flash android back. I took my sd card put into a card reader but it still not recognize my sd card. Is it gone?
What about the sd unlock tool that xbmod released ? try a few nokia devices or a device which takes sd card to see if you can unlock... Check out 96edwy video on YouTube on how to unlock after wp7
I have the same problem like arrirang .
When I put my SdCard to CardReader, windows 7 does not recognize SD Card in reader. If I try proces mentioned in video tutorial -> result is the same. Device USB Mass Storage is displayed in device manager with error code.
I was trying it in three computers (two with windows 7 x64 and one with Windows XP) - the result was allways the same.
Any one help me?
EDIT:
I have found this solution:
1. Connect USB cable from PC to phone.
2. At PC, enter WP7-Update-Cab-Sender folder.
3. Go to ‘if needed install this tool’ folder.
4. Install Setup-UpdateWP (x64 for 64 bits Windows and x86 for 32 bits Windows).
5. Copy DEV_STORAGELOCK.cab to WP7-Update-Cab-Sender folder.
6. Run WP7 Update Cab Sender.bat.
7. Then type S – (S)end Cabs to device.
8. After finished installation, close WP7 Update Cab Sender.
9. Disconnect USB cable from phone.
10. At WP7, launch StorageLock.
11. Click yes to unlock SD card.
12. Shutdown your phone.
13. Put your SD card into card reader.
14. Launch Partition Wizard Home Edition (download it here)
15. You should see 2 partitions on SD card.
16. Delete both of them.
17. Create a primary FAT32 file type partition.
18. Click ‘Apply’ to begin the process.
19. That’s all.
It works! I kid you not!!
mmajor said:
I have the same problem like arrirang .
When I put my SdCard to CardReader, windows 7 does not recognize SD Card in reader. If I try proces mentioned in video tutorial -> result is the same. Device USB Mass Storage is displayed in device manager with error code.
I was trying it in three computers (two with windows 7 x64 and one with Windows XP) - the result was allways the same.
Any one help me?
Click to expand...
Click to collapse
You should know that Installing wp7 locks your card so thats why it is not recognised by your pc..
Have you installed mango or another wp7 version on this sd card or succesfully on another?? I take it, you have no nokia devices that can format your card?
If you have mango installed transfer the storageunlock.cab to the phone followed by partition cab (got to be less than your total capacity) Reset your phone check if partition has taken effect..unlock using storage lock.turn off phone ..take sd card out into adapter into your pc now it should be readable (not full capacity bear in mind) you have to use easeus partition tool to format to full..
If you have mango on a different sd card and want to recover the corrupt one
Check this link http://forum.xda-developers.com/showthread.php?t=1286511
Or if your using just the same sd card you have to start over again and reflash from task 29 stock magdlr radio ie then storage unlock tool
Good luck
hey my problem is that wp7 in my hd2 shows internal memory of 175mb only even though my 8gb sd card is inserted in it..i cant seem to find a sloution to make my phone show the sd card memory..any solution please?
I have the same problem
it's probably because you installed wp7 without the sd card in it and you did not hard reset after installing rom...if so, you need to do a hard reset with the sd card in it for wp7 to recognize the card. or you have a bad card to begin with and the wp7 install had problems.

SD Card

hello, so after recently using WP7, I've found myself unable to use my SD Card
Windows doesn't recognize it (That sd card formatting tool that's in several stickies, DISKPART, device manager, etc.) (I've also used 2 MicroSD -> SD Card adapters in an attempt to fix)
my phone doesn't recognize it (WP7 will use it) (Magldr says it clears the MBR, and I've reinstalled WP7 in an attempt to use the sd formatting tool, but no avail, and CWM fails to recognize it)
I've also installed busy box on my phone and tried to fdisk it, I plugged a 1GB microsd card I have into the phone while in android, used 'mount' got the /dev/ location of the sdcard (/dev/block/void/179:1) and swapped cards, but it won't open the stock 16GB
any ideas XDA?
Dylan Wilson said:
hello, so after recently using WP7, I've found myself unable to use my SD Card
Windows doesn't recognize it (That sd card formatting tool that's in several stickies, DISKPART, device manager, etc.) (I've also used 2 MicroSD -> SD Card adapters in an attempt to fix)
my phone doesn't recognize it (WP7 will use it) (Magldr says it clears the MBR, and I've reinstalled WP7 in an attempt to use the sd formatting tool, but no avail, and CWM fails to recognize it)
I've also installed busy box on my phone and tried to fdisk it, I plugged a 1GB microsd card I have into the phone while in android, used 'mount' got the /dev/ location of the sdcard (/dev/block/void/179:1) and swapped cards, but it won't open the stock 16GB
any ideas XDA?
Click to expand...
Click to collapse
I had this Problem one time too. My Solution was to put the 16GB Mirco-SD Card inside the SD-Adapter. After that i plug this SD-Card inside my Digital-Camera ( Powershot G7 ) and make a "Deep Format". After that, everything works fine...
Maybe this helps!
Happy Christmas,
Michael
Thanks for the tip, I've tried it on one camera but it was a rather crappy one and it just froze the camera o.o
going to try with my nicer camera when I get home
--edit--
eek. tried it on a PowerShot Aesomething and it jsut said memory card error and greyed out the format button, might be time for a new card, oh well, I could go for a higher class on android since it lags my apps a bit

Categories

Resources