Hi,
(Strange problem - OS does not detect SD Card however Bootloader does and loads ROM from SD Card)
I have a strange problem from this morning. I had WP7 mango installed which was working pretty ok apart from a few restarts if the bottom part of phone got warm/hot, so I kept it in from of AC (This idea usually works with HD2)
This morning, WP7 gave an error saying it can not detect the 16 GIG SD Card, I reformatted SD Card using Nokia phone/FAT32 and re-installed WP7 however it gave a message saying No Storage Card present.
I have also tried installing WM6.5 but that too doesnt not detect SD Card.
On top of above, strange thing is that I have installed 3 different version on WM6.5 stock ROM using SD Card method (pressing VolDn methos while powering phone up to boot load ROM from SD Card) and it works perfectly fine however the OS does not detect SD Card.
Has any body faced this problem and have a solution?
Or does any body know of a solution to this problem?
Thanks in advance,
Ash.
a54i54 said:
Hi,
(Strange problem - OS does not detect SD Card however Bootloader does and loads ROM from SD Card)
I have a strange problem from this morning. I had WP7 mango installed which was working pretty ok apart from a few restarts if the bottom part of phone got warm/hot, so I kept it in from of AC (This idea usually works with HD2)
This morning, WP7 gave an error saying it can not detect the 16 GIG SD Card, I reformatted SD Card using Nokia phone/FAT32 and re-installed WP7 however it gave a message saying No Storage Card present.
I have also tried installing WM6.5 but that too doesnt not detect SD Card.
On top of above, strange thing is that I have installed 3 different version on WM6.5 stock ROM using SD Card method (pressing VolDn methos while powering phone up to boot load ROM from SD Card) and it works perfectly fine however the OS does not detect SD Card.
Has any body faced this problem and have a solution?
Or does any body know of a solution to this problem?
Thanks in advance,
Ash.
Click to expand...
Click to collapse
further to add, i have tried 2 sd cards 4gb and 16 gb. WM6.5 says no SD Card present however the WM6.5 and all of software (ROM, Radio, Splash etc) were loaded/installed using LEOIMG.nbh on 16gb SD Card.
I have searched the forum as well as other sites, and have tried re-formatting sd card as well to no luck.
Please help, if you have any idea of whats wrong.
Cheers,
Ash
no one ?
a54i54 said:
no one ?
Click to expand...
Click to collapse
We're all too surprised you managed to flash using a 16gb SD card.,,, normally anything 8gb or larger won't flash nbh files, so your problem is pretty strange.
I lost the shipped 8GB SD card more than year back and since then I am using 16GB SD card with HD2 and it worked perfectly.
Does OS like WP7/WM6.5 uses mount in some way to have card and contents available? If so, can it be mounted using MAGLDR or CWM, since the bootloader which IPL can read the SD Card.
Cheers,
Ash
indeed this is a baffling problem. can't think of conclusive reasons why the tri-color bootloader can see the sd card but OS (WM6.5, WP7, Android) cannot!
i am assuming you have just ONE partition on the sd card...? can you check and tell us the format of the filesystem, i.e. FAT or FAT32...? i think FAT isn't even possible on a 16GB card...it will likely be formatted as FAT32, but lets check to be sure.
Hi ASCIIker,
Many thanks for your response, the SD Card is FAT32 formatted. I have tried both 4gb and 16gb cards but WM6.5 says No Card found.
See screen shots attached. I have also attached screen shot of version showing Stock ROM flashed earlier today using SD Card.
I am not too sure, could it be some thing like mounting of SD Card under these OS's or under SPL which is not able to mount these SD Cards,
The problem started when phone was running WP7 Mango 8107 but it used to crash if it got hot and re-boot on its own, may e one of those automatic re-boots, the OS unmounted Sd card. When I looked at it in the morning, it was showing an error message of no storage card present and the options available were emergency call and shut down. I tried re-booting it 1-2 times and it still showed same message and then I tried loading WM6.5 from SD Card using LEOIMG.nbh which worked and left me confused.
I have also tried USB Mass Storage option of MAGLDR 1.13 however that doesn't work either.
I have never used CLk but I can try that if there is a way to access SD Card using USB with it.
Any suggestions for reviving it back are welcome.
Cheers,
Ash
a54i54 said:
Hi ASCIIker,
Many thanks for your response, the SD Card is FAT32 formatted. I have tried both 4gb and 16gb cards but WM6.5 says No Card found.
See screen shots attached. I have also attached screen shot of version showing Stock ROM flashed earlier today using SD Card.
I am not too sure, could it be some thing like mounting of SD Card under these OS's or under SPL which is not able to mount these SD Cards,
The problem started when phone was running WP7 Mango 8107 but it used to crash if it got hot and re-boot on its own, may e one of those automatic re-boots, the OS unmounted Sd card. When I looked at it in the morning, it was showing an error message of no storage card present and the options available were emergency call and shut down. I tried re-booting it 1-2 times and it still showed same message and then I tried loading WM6.5 from SD Card using LEOIMG.nbh which worked and left me confused.
I have also tried USB Mass Storage option of MAGLDR 1.13 however that doesn't work either.
I have never used CLk but I can try that if there is a way to access SD Card using USB with it.
Any suggestions for reviving it back are welcome.
Cheers,
Ash
Click to expand...
Click to collapse
It is worth a shot but i suspect you it still will not detect the SD card. Just click on the HD2 guide in my sig and scroll down to post #3 and look for the section "Updated version of clk with CWM built in" and click on the link that takes you to the download of that version. Then the bottom of post #1 and read the section "Flashing cLK via SD card". This will have clk with Clockwork Mod installed on your device. Then boot your device and hold down the home button at the same time, this will boot you into CWM and theb select "Mounts and storage" then select"mount USB storage". If you do not see the contents of your SD card on your computer then it is not working. Make sure to try "install zip from sdcard" as well. Just see if it reads the SD card that way.
Also I take it from your posts that you have tried otion #4 USB Mass storage in MAGLDR. So like I said I doubt CWM will see it in mass storage either.
Seeing as WP7 uses the SD card for the internal memory and is constantly using the SD card reader on the device at high speeds. It may just be a case of the SD card reader not being operable with the OS anymore. I mean it has to work at a certain speed level I think for the OS to be able to use it, and maybe the bootloader does not require that same speed. Or it may just be a case of the reader not being able to mount the SD card as read and write both still so it just will not mount it. Like I said these are just shots in the dark. But if it is a problem with it mounting in either read or write it could cause this problem I beleive.
Hi T-Macgnolia, thank you for this detailed reply. I was able to install CLK using SD Card method however it does not recognize SD Card nor does it mount it. It shows an error message - see attached screen shot.
I was wondering if a faster SD Card like Class 6 8 GB would make any difference to current state.
Cheers,
Ash
a54i54 said:
i have tried 2 sd cards 4gb and 16 gb.
Click to expand...
Click to collapse
a54i54 said:
I was wondering if a faster SD Card like Class 6 8 GB would make any difference to current state.
Click to expand...
Click to collapse
if you're getting the same behaviour with all your cards, then its likely to be a problem with the phone, and messing with this class of that sized card is probably a dead end. (thats not to say you shouldnt try if you have cards available, of course!)
To my mind its gotta be one of two things
1 - some problem with the sd controller, that is allowing low level access to the card, so flashing works, but not allowing the higher level drivers full speed access to the card, in much the same way that a PC accesses the hard disk much faster during a normal boot than it does with a 'safe mode' boot.
2 - a virus/glitch/witchcraft/wp7/other has corrupted all your sd cards in some fashion.
Just guesses, of course.
Good luck.
a54i54 said:
Hi T-Macgnolia, thank you for this detailed reply. I was able to install CLK using SD Card method however it does not recognize SD Card nor does it mount it. It shows an error message - see attached screen shot.
I was wondering if a faster SD Card like Class 6 8 GB would make any difference to current state.
Cheers,
Ash
Click to expand...
Click to collapse
I agree with Samsamuel completely, it seemsit is something wrong with the SD card reader/controller that is not letting it read the SD card at a higher speed. Or something really strange and funky has happened to all of your SD cards. But I feel it is the first thing and not the later. If you want to try another SD card, as odd as it sounds, I suggest you try a lower class SD card like a class 2 if you can find on. But then again you may already have one and already tried it I do not know. One thing for sure it seems like a hardware issue and not a software or faulty SD card issue.
I had this exact same problem, in the end I ended up going back to original leo Winmo 6.5, then starting over with HSPL - Magldr - CWM - Android (though I guess WP7 will work too).
I don't know what caused the problem, I just put all these anomalies down to the bad nand blocks on my device.
I'll also note that mass storage in Magldr has never worked for me and still doesn't, the drive mounts but crashes on transfer of any files, but within CWM and Android it works now.
If you have exhausted all other options and have not already tried this then it maybe worth a shot. Good luck.
Thanks michael-jb,
I have tried all these options. I have tried installing different WP7 again though, which I will do tomorrow or day after.
Cheers,
Ash
Related
Hello, I'm not glad that i have to post this topic, but i think the whole story about "Waiting for SD card" problem will never end. I have 3 SD's at home, even one not works.
What i tried:
- i read a lot of topics about this problematics
- i tried to format my cards to fat32
- i tried clean cards
- i tried to format with special tools
- i tried customize startup.txt with msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave etc.
- i tried 5 versions of android, even one not works...
I will be very glad if someone helps me or gives me an advice what should i try
Thanks a lot!
Is any one of the sd cards you tried a "class 2"? Seems that class 6 sd cards have this problem.
unstable_ said:
Hello, I'm not glad that i have to post this topic, but i think the whole story about "Waiting for SD card" problem will never end. I have 3 SD's at home, even one not works.
What i tried:
- i read a lot of topics about this problematics
- i tried to format my cards to fat32
- i tried clean cards
- i tried to format with special tools
- i tried customize startup.txt with msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave etc.
- i tried 5 versions of android, even one not works...
I will be very glad if someone helps me or gives me an advice what should i try
Thanks a lot!
Click to expand...
Click to collapse
no need to try more versions on your current SD cards. Go to look for some very old one, better smaller then 2GB.
I got 5 in my home, 2 of them works. Both of them are 2GB, bought 3 yrs ago.
None of new one could be used.
i realised the old versions of sd card works but the newer ones dun.
U shuld change SD card~~
Pretty Disappointing... I'm stuck too. I'm suprised it hasn't been fixed yet can't be that hard compared to everything else they've acheived.
I hope everyone involved keeps up the hard work but it'd be great for someone to revisit this problem.
its a hardware problem of the sd card, not a software problem.
it will never be fixed (its not possible).
its not like an sd card is too expensive ^^ just get another one...
have a look at this thread
N!ghty said:
its a hardware problem of the sd card, not a software problem.
it will never be fixed (its not possible).
its not like an sd card is too expensive ^^ just get another one...
have a look at this thread
Click to expand...
Click to collapse
I tend to disagree. SD is a well known standard on the market.
The card that I have works fine for more than a year in Windows Mobile with Touch HD card reader. Without a single problem during that time. So everything: operating system, SD card and HTC HD card reader are fine.
It doesn't work with Android, so there is something wrong. Either with SD card initialization procedure, drivers or operating system (Android).
Unfortunately, I can't effort using 2GB card. I'm using my phone e.g. for books reading, music, photos, games etc. It's not only a phone I hope that all these hard working Android guys can fix this issue.
mlemanczyk said:
I tend to disagree. SD is a well known standard on the market.
The card that I have works fine for more than a year in Windows Mobile with Touch HD card reader. Without a single problem during that time. So both: operating system and HTC HD card reader are fine.
If it doesn't work with Android, it's Android's problem. Either with SD card initialization procedure, drivers or operating system (Android).
Click to expand...
Click to collapse
we are not looking at the sd card when its detected by the operating system but by the device itself.
the problem might be that the device is simply not capable to use some sdcards without the proper drivers (which the os then provides). what im saying is: before you enter the os the device might not detect some particular sd cards, but once the os is booted, it does.
the issue here is simple: if the device doesnt support the sd card, the os wont boot, this has nothing to do with the os.
if you dont believe me:
try flashing a WM rom from the "problem sd card". u will see: it wont work.
now try booting android from the same sd card. u will see: it wont work.
now get another card u can boot android with.
now try flashing a WM rom from this sd card. u will see: it will work.
conclusion: its a hardware problem.
i must say im not an expert but im not stupid either. i tried what i explained myself and thats just how it is...
if someone has a better explanation please correct me
N!ghty said:
we are not looking at the sd card when its detected by the operating system but by the device itself.
the problem might be that the device is simply not capable to use some sdcards without the proper drivers (which the os then provides). what im saying is: before you enter the os the device might not detect some particular sd cards, but once the os is booted, it does.
the issue here is simple: if the device doesnt support the sd card, the os wont boot, this has nothing to do with the os.
conclusion: its a hardware problem.
Click to expand...
Click to collapse
What you're saying may be right. I'm not an expert either, so these are only my conclusions.
I think that what may be failing is the HSPL (Bios) that most people here loaded. I'm pretty sure that I was able to flash from SD card on my stock ROM. At some point it stopped working. I'll try to rollback to stock SPL (I'm not sure how to do it, yet) and confirm. So changed HSPL may be the issue.
Another question is, why SD drivers in either case are not loaded with the boot image. I don't know Android internals, so I can't tell if this is possible. But it would help in this case.
In both cases I don't think this is hardware issue that can't be resolved.
N!ghty said:
we are not looking at the sd card when its detected by the operating system but by the device itself.
the problem might be that the device is simply not capable to use some sdcards without the proper drivers (which the os then provides). what im saying is: before you enter the os the device might not detect some particular sd cards, but once the os is booted, it does.
the issue here is simple: if the device doesnt support the sd card, the os wont boot, this has nothing to do with the os.
if you dont believe me:
try flashing a WM rom from the "problem sd card". u will see: it wont work.
now try booting android from the same sd card. u will see: it wont work.
now get another card u can boot android with.
now try flashing a WM rom from this sd card. u will see: it will work.
conclusion: its a hardware problem.
i must say im not an expert but im not stupid either. i tried what i explained myself and thats just how it is...
if someone has a better explanation please correct me
Click to expand...
Click to collapse
Sorry. You are wrong. I am frequently flash my phone using SD card with HSPL. But the card also face problem with Android. So definitely not the hardware problem.
Hello
I have 2 card's, one 8GB from Transcend and one 4GB from Kingston, and the kingston only works with android!
UPDATE: Transcend Class 6, Kingston Class 4
cereal86 said:
Hello
I have 2 card's, one 8GB from Transcend and one 4GB from Kingston, and the kingston only works with android!
Click to expand...
Click to collapse
lucky guy
From my personal experience on my Kaiser I can confirm that newer SD cards do indeed seem to cause problems in Android, especially with installing or running from SD.
I have 3 SD cards I normally use for my phones, the newest a 4Gb class 6, which I have never been able to use for Android on Kaiser or Blackstone, I can't even flash with it, it just never works, using it for data storage works fine, just can't run Android from SD or Flash with it, the other 2 are 2Gb class 2's, both work just fine for flashing, and work great when using them for running Android builds from SD on Kais and Blac hardware.
My conclusions? Well I fall into the 'hardware problem' camp, mostly, since I can't flash either Winmo or Android with the class 6, it may be the card, but I wonder sometimes if it's the capacity, since both the class 2's are almost the same age as the class 6, all are sdhc, all 3 are from the same manufacturer , (SanDisk), in fact the only real difference is the capacity.
Waiting for SD Card
I have also tried a Transcend 8 GB SD Card and it doesn't work.
The same files on a Tanscend 1GB SD Card work just fine, so it's definitely a hardware problem caused by the card.
I've tried everything - formatting the card with different tools and different cluster sizes, partitioning the card below 4GB - all without success.
For all you guys out there with the "waiting for SD card" problem: Get a different (small) card !! - It's worth it !
what about this - copy files in the package into device internal memory and boot from there(i don´t know where to change booting directory in cfg...). if it created data.img on the sdcard, it would be fine solution...
kosmodisk said:
what about this - copy files in the package into device internal memory and boot from there(i don´t know where to change booting directory in cfg...). if it created data.img on the sdcard, it would be fine solution...
Click to expand...
Click to collapse
Not sure it's that simple... once winmo is killed, the internal memory would have to be accessed natively by Android. It could be different for every device (where as SD is a standard, device agnostic format, internal memory isn't)
Whilst most HTC devices will work in an almost identical manner, there is no guarantee of what the internal memory is (it could actually be a HDD in theory).
I had this problem with my Transcend 8GB SD card, nothing solved it so I traded it for a Sandisk 8GB SD card with a colleague.
Works fine now. ^^
kalyster said:
I had this problem with my Transcend 8GB SD card, nothing solved it so I traded it for a Sandisk 8GB SD card with a colleague.
Works fine now. ^^
Click to expand...
Click to collapse
I'm using a Transcend 8GB card...the one that came with my blackstone with no problems at all. Don't think I did anything special though, formatted to FAT32, installed android from a CAB (in this thread) loaded Android and then I copied my WinMo files back to the SD card as well.
One 2GB sandisk card I had though didn't work at all until I formatted it to FAT32 under linux, then it worked fine in WinMo and Android.
A friend also suggested to me trying to reduce the 'allocation unit size' when formatting the card but I've not tried that approach.
maybe u can try format SD Card to FAT (not FAT32 formatted i think.. maybe it FAT16)! i have 8gb and 2gb SD Cards.. and that all cards not work untill i formatted my 2gb SD Card to FAT!
CMIIW..
Hi,
I have Sandisk 2gb SD card which comes with hd2, i installed WP7 but it seems that WP7 can not recognize my SD because when i put SD in my computer nothing is changed in my SD even i tested it, I put some files in SD and reinstall WP7 so as far as i understand wp7 has to format my SD put its specific partition but guess what nothing is changed in my SD even that files remain in the same place...
So i tried to format SD my self with FAT32 and FAT and even i delete my SD partition and none of them make WP7 format and make partitions on my SD card...
P.S-1 My SD card is working i tested it wit my computer by formatting copy some files there so read and write is ok.
P.S-2 WP7 booted correctly in this situation i mean when SD is in device the only problem i have is WIFI can not find any router when SD is in device, when i took it out wifi start working, why i'm saying this because i aware of compatibility issue of WP7 with some SD cards where it reboots if it is not compatible .
same thing happens to me, I am now trying to reinstall (again) wp7, and it seems it got stuck at the DFT screen..... previously it booted almost inmediately. maybe it is partitioning it?, for those of you guys that sd card works, wp7 boots inmidiately?
Yeah SD cards makes crash wifi !
And i cannot use it... Flash WP7 with formated SD cards NTFS but still doesn't works !
First time i istalled WP7 without SD card and when i afterward inserted card nothing was changed. Then i made Factory Reset from Settings menu and my phone started to restart over and over from point where DFT banner shws first time after loader. Then i went to the loader and as i can remember then i re-selected preferred boot source and then for me all was good. Now it show 1.6GB free space with my original HD2 SD card.
i am having axactly the same trouble. i have a san disk 2 gb too. it'll be enough for me but wp7 does not recognize it. i installed both sd-card inserted and sd-card not inserted. i booted with sd-cad and without sd-card. i tried every posibility but no result
reserved space is %95 on zune and it tells me there is no disk space. so i cant start using it full functionally and it makes me really sad
any help is appreciated. thanks.
Pisisuli said:
...
and my phone started to restart over and over from point where DFT banner shws first time after loader.
...
Click to expand...
Click to collapse
that's exactly what mine did!
...
Then i went to the loader and as i can remember then i re-selected preferred boot source and then for me all was good.
...
Click to expand...
Click to collapse
how did you do that? can you provide a short 1,2,3 step- tut to me? thx in adv.!
Same here my 2Gb card is only showing 15 mb of available space and I cant even transfer music or install any apps. can some pls help me
thanks
I just went to
setting and then soft reset ... and I couldn't go to loader I don;t know why !!
then I lost every thing even the unlock ...
and in the finally i found just 997 mb !!!!!!!!!!!!!!!!
jessesam said:
Same here my 2Gb card is only showing 15 mb of available space and I cant even transfer music or install any apps. can some pls help me
thanks
Click to expand...
Click to collapse
I have exact the same problem.. i found some sort of "solution". but it is a bit strange. when I pull out the sd card, boot my phone in magldr, insert my sd card and boot wp7, It shows the normal storage instead of the 15 mb.
but when I try a normal reboot without going to magldr, its going back to the 15 mb. and when I try to sync my phone with zune,(with the put-sdcard-in-phone-when-in-magldr-solution) everything goes slow.
Dont know if you (or someone else) already found a "good" solution?
greetz
all of you guys have an incompatible SD card, sorry guys, will need to buy a new one, its a bit of a lottery as that too might not work and dispite what some on here say its impossible to recomend anything.
only advice i can give is get a card that class 2 or 4 and dont spend money on a card that you may end up using for a tiny paperwight
is my sd card gone?
After I successfully flash WM7, I juz realize that my pc not recognize my sd card when i connect my phone to d computer. First, i thought becoz of some bug of wm7 so i try to flash android back. I took my sd card put into a card reader but it still not recognize my sd card. Is it gone?
What about the sd unlock tool that xbmod released ? try a few nokia devices or a device which takes sd card to see if you can unlock... Check out 96edwy video on YouTube on how to unlock after wp7
I have the same problem like arrirang .
When I put my SdCard to CardReader, windows 7 does not recognize SD Card in reader. If I try proces mentioned in video tutorial -> result is the same. Device USB Mass Storage is displayed in device manager with error code.
I was trying it in three computers (two with windows 7 x64 and one with Windows XP) - the result was allways the same.
Any one help me?
EDIT:
I have found this solution:
1. Connect USB cable from PC to phone.
2. At PC, enter WP7-Update-Cab-Sender folder.
3. Go to ‘if needed install this tool’ folder.
4. Install Setup-UpdateWP (x64 for 64 bits Windows and x86 for 32 bits Windows).
5. Copy DEV_STORAGELOCK.cab to WP7-Update-Cab-Sender folder.
6. Run WP7 Update Cab Sender.bat.
7. Then type S – (S)end Cabs to device.
8. After finished installation, close WP7 Update Cab Sender.
9. Disconnect USB cable from phone.
10. At WP7, launch StorageLock.
11. Click yes to unlock SD card.
12. Shutdown your phone.
13. Put your SD card into card reader.
14. Launch Partition Wizard Home Edition (download it here)
15. You should see 2 partitions on SD card.
16. Delete both of them.
17. Create a primary FAT32 file type partition.
18. Click ‘Apply’ to begin the process.
19. That’s all.
It works! I kid you not!!
mmajor said:
I have the same problem like arrirang .
When I put my SdCard to CardReader, windows 7 does not recognize SD Card in reader. If I try proces mentioned in video tutorial -> result is the same. Device USB Mass Storage is displayed in device manager with error code.
I was trying it in three computers (two with windows 7 x64 and one with Windows XP) - the result was allways the same.
Any one help me?
Click to expand...
Click to collapse
You should know that Installing wp7 locks your card so thats why it is not recognised by your pc..
Have you installed mango or another wp7 version on this sd card or succesfully on another?? I take it, you have no nokia devices that can format your card?
If you have mango installed transfer the storageunlock.cab to the phone followed by partition cab (got to be less than your total capacity) Reset your phone check if partition has taken effect..unlock using storage lock.turn off phone ..take sd card out into adapter into your pc now it should be readable (not full capacity bear in mind) you have to use easeus partition tool to format to full..
If you have mango on a different sd card and want to recover the corrupt one
Check this link http://forum.xda-developers.com/showthread.php?t=1286511
Or if your using just the same sd card you have to start over again and reflash from task 29 stock magdlr radio ie then storage unlock tool
Good luck
hey my problem is that wp7 in my hd2 shows internal memory of 175mb only even though my 8gb sd card is inserted in it..i cant seem to find a sloution to make my phone show the sd card memory..any solution please?
I have the same problem
it's probably because you installed wp7 without the sd card in it and you did not hard reset after installing rom...if so, you need to do a hard reset with the sd card in it for wp7 to recognize the card. or you have a bad card to begin with and the wp7 install had problems.
I'm not sure if this is a common problem or not. There seem to be a lot of SD card issues, but the descriptions don't seem to apply to me.
I'm installing WP7 on the HD2, and everything works except that when I look in the available memory, it says there is 170MB (thereabouts) of storage space available when there is an SD card inserted. This card was present on the initial boot, and is the one that originally came with the HD2 - a SanDisk 2GB.
I don't have the restarting issues that others have seen, so I'm not sure if this is a symptom of the mysterious unsupported SD card issue?
hi,
Did you read this thread?
http://forum.xda-developers.com/showthread.php?t=912904
Partially, but I find most people there are having problems with constantly rebooting, or similar problems. I don't have these problems, just that the SD card isn't being used. I also have a wifi problem (always Searching) which I've read is SD card-related but I don't know if that because the SD card isn't being found and utilised, or that the card itself isn't supported.
Never mind. I tried another card (8GB SDHC, as opposed to the 2GB SD) and that picked it up straight away so it looks like it was just a case of the SD card being unsupported.
Hope this proves useful to others also.
What steps did u take when "trying another sd card" I have the 16 gig which i did NOT 1rst time boot with but did have interesting glitches i.e. wifi and reboots..
I tried Hard resetting with it in but to no avail. Hopefully there is still hope for my existing card as I am going to attempt a full 1rst install with it in but maybe you could post the steps you took when getting the new card to work
I powered off, inserted the new SD card, booted into MAGLDR and reinstalled Windows Phone 7. I believe the SD card has to be present on the first boot, so I reset may work, but I reinstalled just to be sure!
After installation and the first boot, the new SD card was recognised and used (as confirmed by checking 'About' in 'Settings'). Hope that helps.
Hi all.
I have a 16gb micro sd card class 2 (sandisk).
Yesterday the message "damaged sd card" came on my notification bar.
I tried to format the card but i got no luck. With every i use i got errors (gparted, windows native tool, ubuntu disk manager).
So i bought a 8gb micro sd card class 4 (maxell) for replacement.
Sadly my htc legend doesn't accept this card neither...same message.
This time i'm sure the card is ok...because it works fine on any PC/Device i tried (including my girlfriend's samsung spica).
At first i though i might got an usb brick...so tried
fastboot oem enableqxdm 0
with no luck...then i tried flashing another rom (aliba's Cyanogen 6.1, SuperBler V4)...same behaviour.
with dispair I took my girlfriend's 2gb microsd (sandisk) and tried this time with success!!
So 2 gb sdcard works.
8 gb not.
what do you suggest, crappy new sd card? or my phone got problems with sdhc?
What's brought all the old devs back?!
I've never seen that kind of behavior before... Hmm...
TheGrammarFreak said:
What's brought all the old devs back?!
I've never seen that kind of behavior before... Hmm...
Click to expand...
Click to collapse
errors bring us here!
I can add one more to the solving puzzle:
in recovery (S-OFF) i can mount the card but while coping/reading it gives me I/O errors and than i have to reboot recovery to let it read some more (till a next I/O error...)
!!!
I'm Experiencing the same proplem. Yesterday I got the same error message "Damage SD card" I cant go into clockwork recovery mode to format SD card, I get the E:faliled to open/Sdcard/update.zip(no such file or directory). Its a 4GB Sd card and Im running CyanogenMod-7.0.0.-RC0-Legend-Kang....
Caifan09 said:
I'm Experiencing the same proplem. Yesterday I got the same error message "Damage SD card" I cant go into clockwork recovery mode to format SD card, I get the E:faliled to open/Sdcard/update.zip(no such file or directory). Its a 4GB Sd card and Im running CyanogenMod-7.0.0.-RC0-Legend-Kang....
Click to expand...
Click to collapse
I'm waiting to try a different SDHC card. I think it's related to bad quality sdhc.
I was able to format the SD card via PC recoverywindows.bat...so far no problems but who knows maybe in a near future I will probably get the DAmage SD card message again.
I had the exact same thing myself a while back. Although it probably won't help you, I took it out and cleaned the contacts (no doubt superfluous but you have to try everything, right?) and put it back in (twice), and it worked. It's been running fine for months now
Hi, I recently flashed my 1st ROM, an Android rom to my HD2. I followed a guide in a recent edition of Micro Mart magazine. Everything went great & the rom is up & running, the only problem i'm having is with the SD card. I just get a notification saying 'SD card damaged'.
I've looked around on the forums & i've read numerous threads on SD card problems but I don't know which is relevant to my problem. The SD card works fine in other devices, just not on the Android rom. Im using the Cyanogen 'gpc_hd2_gingerbread_v1.7' NAND rom. Do i have to create an ext3 partition to get my SD card recognised?
Sorry for another SD card thread but this is my 1st time flash & Android rom so I really dont know about these ext partitions and how they are supposed to work!
Thanks for any advice in advance,
Tom
You might want to reformat your SD card. Get your SD card out and format it to fat32(important) using a card reader. Also make sure to backup your SD.
Try that.
Sorry I forgot to mention I tried it from a fresh format in windows, although I've read about the Panasonic formater so I could give that a go when I get home.
Yes you might want to reformat your SD card I suggest you use this software to format it. Also make sure you do a full wipe and format it using Fat 32.
One more thing is have you checked to see if your Android is mounting your SD card? When you boot your HD2 up and you see the Android lock screen appesr do you see it say preparing your SD card at the top of the screen?
T-Macgnolia said:
One more thing is have you checked to see if your Android is mounting your SD card? When you boot your HD2 up and you see the Android lock screen appesr do you see it say preparing your SD card at the top of the screen?
Click to expand...
Click to collapse
Yes I remember seeing it saying preparing but then it just switches to the damaged notification. If I then select that, it brings up a box saying it may need to be formatted but selecting that doesn't seem to do anything, the damaged notification just stays there.
I've got it working. I followed the guide in this thread & it worked 1st time. Just follow it carefully and slowly