as i open some games like GALAXY ON FIRE/NFS SHIFT13 & 14, i found some graphic problems,
1. image lost and only blank showed (check attachment 'NFS problem', when open GALAXY ON FIRE THD/NFS SHIFT13 & 14)
2. can't find tegra2 on tablet,said that my xoom is an 'unsupported device'...which is unbelivable...(check attachment 'fruit ninja problem', when open Fruit Ninja THD)
3. show 'DXT texture support not found' and unable to run(when open Backbreaker Football THD)
someone know about that? please help!!!
thanks a lot!
Can you let us know what version/operating system you are running? Are you completely stock/locked or have you made any mods? When did this happen and under what circumstances? We can't help you without more info.
Dear Community,
i installed this Rom on my defy green lense:
[ROM][GB][2012.06.19]MS2Ginger, 720p, panorama - 2nd-system, multiboot,softsimunlock
but i have a problem:
If i try to open any program to manage the cpu settings, the phone restarts....i used the following kernel:
MS2Ginger4-greenbread-with-3.4.2-179-BL5-kernel.zip.
Can you help me with this problem?
€: found new things, mobile phone seems to run very slow (perhaps always only at 300 mhz)
i tried to change the cpu settings in the recovery menu but nothing is changing....i always reach just 300 mhz...the phone is slow and not stable.
Hey Guys,
The Admins decided to basically add the Charm forums into the Flipout forums, so far only the main forum heading has been changed, hopefully the admins will do the rest of the changes soon.
In the meanwhile, i thought it would be useful to post useful threads on the charm porting, basically since flipout and charm are the same phone with a different design, these should be applicable with respective changes to flipout also.
[GUIDE] How to Overclock your Motorola Charm
Author : dabiano
Thread : http://forum.xda-developers.com/showthread.php?t=1274027
Content :
dabiano said:
Hello and Good Day to All!,
note: I can no longer maintain this as I have already sold my Charm Unit ..., attached below is the source code used on this development
This is a guide on how to overclock your Motorola Charm. [tested on T-Mobile Motorola Charm MB502]
Disclaimer: I am not responsible of bricking/frying your phone!, use this at your own risk
It is confirmed that some users of the Charm Overclock have bricked theirs using this app
Prerequisites:
● Phone should be rooted
● You have a copy of a "proper/valid" sbf file of your Motorola Charm unit in case anything goes wrong.
Ask people in the link provided for directions on how to obtain your proper sbf file: http://modmymobile.com/forums/633-motorola-charm-general/557900-charm-firmwares-superthread.html
Method #1
Install my Charm Overclock App and use it like that of the Milestone Overclock App
[note: apk found just below this very post]
Method #2 (by ryukoz)
1. open /system/build.prop in text editor
2. find ro.product.model=MB502, change MB502 to MB511
3. use milestone overclock
Method #3
Things needed (some maybe optional):
● Your Motorola Charm phone
● PC
● USB Data Cable for your Phone/PC
● MicroSD Card Reader
Prerequisites:
● All pertaining drivers should be installed in your PC (i.e. Moto USB Drivers..., etc.)
The Steps:
1. From your PC, Download 'Milestone Overclock' apk from: http://code.google.com/p/milestone-overclock/downloads/list (I've used version 148)
2. Extract this Milestone Overclock apk to a clean folder and locate the file 'overclock_flipout_21.ko' in: ..res\raw\ directory
3. Copy the module overclock_flipout_21.ko into the root of your SDCard
4. Install the Milestone Overclock App to your phone (either thru Market or with the one you downloaded)
5. Install also SetCPU
6. From a terminal emulator on your phone or thru adb, run these commands (should be root user)
7. # su
8. # cd /sdcard
9. # grep omap2_clk_init_cpufreq_table /proc/kallsyms
● you should see an output like: c004e498 T omap2_clk_init_cpufreq_table
● take note of the red colored eight digit hex number
10. and then we load the Overclocking Module with the code below (replace the RED number with your actual address you found on your device):
11. # insmod overclock_flipout_21.ko omap2_clk_init_cpufreq_table_addr=0xc004e498
12. run dmesg and see if you have something similar below:
● [ 9361.096099] overclock: found mpu_opps_addr at 0xc050c888
13. Open the Milestone Overclock app (the module should be loaded by default as we already loaded it manually)
14. Slide the slider to the far right and press the 'menu' button and choose 'settings'
15. In the 'Custom rate (KHz)', put in the value you like, say: '1000000' (this is 1GHz)
16. In the 'Custom vsel', put in the value you like say: '60'
17. Leave the other settings and press 'Ok'
18. Lastly, Press the 'Apply' button ^_^
Don't forget to set 'SetCPU' as well
I would like to thank "Milestone Overclock" and "SetCPU" ^_^
also..., to the XDA Personnels: Please Open a Motorola Charm Sub Forum ^_^
Click to expand...
Click to collapse
Credits to the respective author and aforementioned credits.
Frequency and Vsel Table
Frequency and Vsel Table
dabiano said:
Currently tested and somewhat stable:
● device=mb502, frequency=1GHz, vsel=60 (stable), user=dabiano
● device=mb502, frequency=1GHz, vsel=58 (stable), user=therkr
● device=mb502, frequency=1.1GHz, vsel=63 (stable? [still testing]), user=elliot.newnham
● device=mb502, frequency=720MHz, vsel=46 (stable? [still testing]), user=ryukoz
Default Frequency Table!? (via cat /proc/overclock/mpu_opps)
● 720MHz @ 62vsel
● 550MHz @ 56vsel
● 500MHz @ 50vsel
● 250MHz @ 39vsel
● 125MHz @ 32vsel
My Customized Frequency Table!
● 1GHz @ 60vsel
● 800MHz @ 50vsel
● 600MHz @ 40vsel
● 400MHz @ 30vsel
● 200MHz @ 20vsel
other values are welcome! ^_^, we need other combinations
Click to expand...
Click to collapse
General Q and A
Charm Overclock App Q and A
Q. Why does the "Autoload on boot" won't work?
A. Now it works by modifying /system/bin/mot_boot_mode (I don't know other alternatives to make it set during boot/startup)
Q. Your Application sucks.
Q. Can we include this "fill-in-the-blanks" feature?
A. I'm welcome to such improvements [if I have the time][/QUOTE]
Please inform me if there are any corrections to be made
bricked my phone
Hi i was using motorola charm rooted from 6 months with links2sd,
since my phone became slow I followed the instructions of OC,
but never backd up my stock
i OC'd to 1000Hz 60 vsels (dono wat vsel means)
now my phone is not booting past M logo
i tried hard reset methods which did not work ,
IS THERE A POSSIBILITY OF RECOVERY ??
HELP ME PLS I M A NOOB
flash with sbf
hold power and x or power and up on your dpad to boot into bootloader mode,
then flash with sbf, you will lose everything on your device but your device will boot up afterwards
sunilkumar1 said:
Hi i was using motorola charm rooted from 6 months with links2sd,
since my phone became slow I followed the instructions of OC,
but never backd up my stock
i OC'd to 1000Hz 60 vsels (dono wat vsel means)
now my phone is not booting past M logo
i tried hard reset methods which did not work ,
IS THERE A POSSIBILITY OF RECOVERY ??
HELP ME PLS I M A NOOB
Click to expand...
Click to collapse
Please Open Motorola Charm Sub Forum
RSD LITE is not detecting phone
plageran said:
hold power and x or power and up on your dpad to boot into bootloader mode,
then flash with sbf, you will lose everything on your device but your device will boot up afterwards
Click to expand...
Click to collapse
bob,
firstly thanx for ur reply
I followed your steps, but RSD lite is not able to detect
previously i used rsd lite 5... version
now tried with version 4.6 still did not work
suggest me any other software to unbrick my phone:victory:
did you install your motorola drivers?
when you plug your device in, does your machine detect your device and are you sure you see the bootloader screen?
exactly what did you try and how far did you get?
Edit:
I found a link with everything you should need, and your device is only soft-bricked.
As long as your phone switches on you should be able to flash it, its when it doesn't respond that you will have a problem.
Link:
http://forum.xda-developers.com/showpost.php?p=14227486&postcount=1
sunilkumar1 said:
bob,
firstly thanx for ur reply
I followed your steps, but RSD lite is not able to detect
previously i used rsd lite 5... version
now tried with version 4.6 still did not work
suggest me any other software to unbrick my phone:victory:
Click to expand...
Click to collapse
Finally unbricked phone
plageran said:
did you install your motorola drivers?
when you plug your device in, does your machine detect your device and are you sure you see the bootloader screen?
exactly what did you try and how far did you get?
Edit:
I found a link with everything you should need, and your device is only soft-bricked.
As long as your phone switches on you should be able to flash it, its when it doesn't respond that you will have a problem.
Link:
http://forum.xda-developers.com/showpost.php?p=14227486&postcount=1
Click to expand...
Click to collapse
At last I could figure out difference b/w recovery window and boot loader
I was assuming recovery window as bootloader
at last figured out difference and unbricked my phone
thanx alot for ur support,
regards,
Sunil Kumar
sunilkumar1 said:
At last I could figure out difference b/w recovery window and boot loader
I was assuming recovery window as bootloader
at last figured out difference and unbricked my phone
thanx alot for ur support,
regards,
Sunil Kumar
Click to expand...
Click to collapse
Hi Sunil,
What exactly did you do to flash a the sbf file.
I would be of great help as i have bricked mine.
I have installed full rom android and I tried to install bein sport (mena) but google play says "this app is incompatible with your device"..
then I edited the build.prop file I changed :
ro.product.model=SM-N920G
ro.product.name=SM-N920G
ro.product.device=SM-N920G
ro.build,product=SM-N920G
also I changed every word "nvidia" to "samsung" after that I rebooted the device which I got the blank screen ..
any ideas ?
Hi, I try PhoenixOs on my Asus M80TA - it's working and it's great system.
But I have problem with adjusting brightness - don' work.
I read about RemixOs about change ro.remixos.bos from true to false in build.prop to fix the same issue. But in PhoenixOs i dont know how to fix it, or even if it is possible. (On my tablet Remix don't want to boot) - PhoenixOS is the only onr Android which I tried and it work.
Second problem is bluetooth which is not working - i don't need bluetooth.
Next - deep sleep, when I hit power buton system go sleep but LCD still is powered on.
Also is there any way to install DRM Widevine module?
Can anybody help me how to fix this issues?
Thanks.
locoslaw said:
Hi, I try PhoenixOs on my Asus M80TA - it's working and it's great system.
But I have problem with adjusting brightness - don' work.
I read about RemixOs about change ro.remixos.bos from true to false in build.prop to fix the same issue. But in PhoenixOs i dont know how to fix it, or even if it is possible. (On my tablet Remix don't want to boot) - PhoenixOS is the only onr Android which I tried and it work.
Second problem is bluetooth which is not working - i don't need bluetooth.
Next - deep sleep, when I hit power buton system go sleep but LCD still is powered on.
Also is there any way to install DRM Widevine module?
Can anybody help me how to fix this issues?
Thanks.
Click to expand...
Click to collapse
Sorry for off topic
I have a M80TA too, and I tried to install both 64bit and X86 PhoenixOS, but neither one is working, I cannot see the PhonenixOS but windows 10 only, I also search the problem in Google and no lucky!
Does it caused by EFI (or something like that?)
And how you install it to M80TA?
Thanks in advance and sorry for my English!
Hi there, any one trying to adjust brightness... I got it.... In the boot menu...keep it in legacy mode and the PXE efi network is to be on the top in the boot order... That all brightness is working