hi,
i installed some apps like bsbtweaks.. after a day i realised my cam app only work after first mins of reboot , if i run app and try to open cam it says like : failed to setup cam etc.
this is my first experience on hd2 and wm, what can i do to solve this problem ? thanks , btw i can edit registry or system files =)
offical and last firmware.
Disable all extra modes and resolutions for camera in BSB. Those extra modes needs more RAM, which is usually only available after start, and/or when no other application is running (Opera 10 is known to eat almost all RAM for example).
thank you , i have already disabled them but it was still not working , then i found a registry entry that says " deactivate" in cam settings and set it to 0 , cam is working for now in full ram , but i am still test-ng if it is going to be ok.
If push comes to shove, a hard reset usually fixes most issues !
I am getting errors again ... any ideas ? not hard reset please =)
Please do not reply in this thread.
Code:
[QUOTE][B][COLOR="Blue"]Changelog for 20110916 Nightly_Build_v1.0 version:[/COLOR]
1.change baseband to UK/DE 2.2.2 to solve signal problem on some areas/phones
2.tweak conservative governor for battery saving
3.add powerful milestone2toolbox from Mogu-[URL="http://forum.xda-developers.com/member.php?u=2984200"]sw_acer[/URL] !
4.turn down vibration level
5.update Gallery3D to 2.0
6.remove IMEtutorial.apk
7.update CMParts.apk and battery files to MS1-0914
8.add AZERTY and QWERTZ in /system/usr/[email protected]/. Switch to any of them by renaming if you need.
And no more...
[COLOR="Blue"]Download link[COLOR="Red"]>>>[URL="http://www.mirrorcreator.com/files/RF0TPGZC/EndlessCM7-20110916-Nightly_Build_v1.0.zip_links"][I]Click me[/I][/URL]<<<[/COLOR][/B][/COLOR]
[B][COLOR="blue"]MegaUpload>>>[URL="http://www.megaupload.com/?d=JMAD7SO9"]Click here[/URL]<<<[/COLOR][/B][/QUOTE]
[QUOTE][COLOR="Blue"][B]Changelog for 20110914 Nightly_Build_v1.0 version:[/COLOR]
1.minor tweaks on WIFI config
Download link:>>>[I][URL="http://www.mirrorcreator.com/files/QI5PAZXX/EndlessCM7-20110914-Nightly_Build_v1.zip_links"]Click me[/URL][/I]<<<
[MegaUpload]>>>[I][URL="http://www.megaupload.com/?d=9VMX81Y9"]Click here[/URL][/I]<<<[/B][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 20110913 Nightly_Build_v2.1 version:[/COLOR]
1.fix glowing edges breaking issue
2.fix camera crash (related to glowing edges fix)
3.fix installation script
And no more......
[COLOR="Blue"]20110913 v2.1 Download link: [COLOR="Red"]>>>[URL="http://www.mirrorcreator.com/files/AGU3IC7J/EndlessCM7-20110913-Nightly_Build_v2.1.zip_links"]Click Here[/URL]<<<[/COLOR][/COLOR][/B][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 20110913 Nightly_Build_v1 version:[/COLOR]
1.fix long stuck on 2nd-M
2.[port from MS1][QUOTE]added options to limit max CPU frequency when screen is off and when phone is in car dock
(When the phone is in car dock it can easily overheat as there is usually: heavy navigation app running, gps in use, battery charging, 3g in use, sun shining directly at phone behind front car window. All this together can lead to battery temperature rising above 50C at which point the charging is automatically stopped to prevent battery damage and you can end up with phone battery empty after some time despite phone being connected to charger. So the CPU freq limit for car dock is there to help with this temperature issue.)[/QUOTE]
3.improve UI smoothness
4.enable WIFI tethering
5.mod/fix on optimization scripts to fit MS2 better
6.update battery files to MS1-0912
7.minor tweaks on build.prop
8.update flash player and voice360 thanks to jorgebaruchi
9.downgrade CWM to stock version due to critical BUG :(
10.change boot order.
And more secret changes......
[COLOR="Blue"]20110913 v1 Download link [COLOR="Red"]>>>[/COLOR][URL="http://www.mirrorcreator.com/files/65Q1WFBY/EndlessCM7-20110913-Nightly_Build_v1.zip_links"]Click me[/URL][COLOR="red"]<<<[/COLOR][/COLOR][/B][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 20110909 v3+ version:[/COLOR]
1.increase boot speed
2.fix secure lock of go sms and some other apps
3.update clockworkmod recovery to 5.0.2.X [COLOR="Blue"](Big thanks to [URL="http://forum.xda-developers.com/member.php?u=2045006"]WeeDv2[/URL] !)[/COLOR]
4.merge and clean and mod on optimization scripts
5.some adjustment on auto brightness
6.improve 3G
7.improve battery life
8.update battery files to MS1-0910 build
9.turn down vibration level
10.Should fix system logcat
11.update google docs to 1.0.16 and new fully functional calculator from [URL="http://forum.xda-developers.com/showthread.php?t=1161110"]Wajk[/URL]
12.arrange build.prop with some tweaks
13.Should fix some random FC or freeze issue
And more Secret changes......[/B]
[COLOR="Gray"][B]20110909 v3+ Download Link: [I]Removed[/I]...[/B][/COLOR][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 110909-nightly build v2 version:[/COLOR]
1. add Swype v3.25 Global version(no stock KB,but still keep MOTO KB)
2. improve WIFI and enable 802.n support
3. improve GPS speed
4. fix low-battery warning LED
5. improve signal(3G) and Network
6. fix sensors in new 2nd-init version
7. many tweaks to build.prop and script
8. add tweaks script from icendfire
9. change voice360 to english version (thanks to jorgebaruchi !)
10.add adobe flash player v10.3 and Titanium Backup v4.2.1
11.improve scrolling smoothness
12.fix a strange incompatible with chinese characters issue in some apps(RE/voice360/...)
13.remove HWdebounce.apk ( if you need this, come [URL="http://forum.xda-developers.com/showthread.php?t=1058544"]here[/URL] )
14.add FULL Gapps again and update Google+ to 1.0.6
15.mod imoseyon script,now you are free to wipe data
16.APN is restored to CM7 stock one
17.improve UI speed
18.fix format/restore data issue in new boot version
19.disable wifi tethering, in case of bug
20.add detail info in build.prop
And more...
[COLOR="Blue"]Patch to get STOCK phone/contact/sms back: see attachment
0909 download link: [url]http://www.mirrorcreator.com/files/HYMOVJIP/EndlessCM7-110909-Nightly_Build_signed_v2.zip_links[/url][/COLOR].[/B][/QUOTE]
[QUOTE][B][COLOR="Blue"]Changelog for 110906-boot_wifi_test2 version:[/COLOR]
1. A more native fix to USB connection ( moto portal&tool is available now )
2. add imoseyon tweak script
3. improve GPS(add UK/brazil/CH+HK+TW/USA services info)
4. some adjustment on auto brightness
5. fix losing (gapps) icon issue (area related issue, redirect google services in hosts)
6. enable WIFI tethering
7. try to improve battery charging(replacing charge_only_mode)
8. try to improve touch sensitivity (build.prop)
9. clean some system apps/junks ( common/necessary gapps are reserved )
10.update moto IME from GB leak
11.improve network and voice (not sure)
12.fix sensor/GPS crash in 0906 version(replace 2nd-init with RC1.5)
13.disable 720p option in camcamera,which is buggy.
And more.
[COLOR="Blue"]Download Link: [url]http://www.mirrorcreator.com/files/MBCMQZLY/EndlessCM7-2.3.5-110906-Stable.zip_links[/url][/COLOR][/B][/QUOTE]
[QUOTE][B][COLOR="blue"]Change log for 0903 RC-1.5 version:[/COLOR]
1.fix Share sd card and Share data in bootmenu
2.enhance sms
3.optimize conservative
4.compromise fix to 300mhZ setting
5.fix stock recovery
6.fix 3D gallery
7.optimize battery configuration
8.tweaks on build.prop and framework-res.apk
9.fix adbd in CWM
10.remove anti-AD hosts
11.add some optimization script(steal it from Wajk...)
12.change phone fingerprint to UK 2.2.2
13.update location info for ch ( IF you are NOT in china, please disable this function)
14.add moto IME
15.try to fix battery jumping again(replace libbattd.so from MS1)
And more......[/B]
[B][COLOR="Blue"]Download:[url]http://www.mirrorcreator.com/files/VAGTDYIT/EndlessCM7-0903-ver.MIX.zip_links[/url][/COLOR][/B][/QUOTE]
[QUOTE][COLOR="Blue"][B]Change log for 110901 version[Uploading] :[/B][/COLOR]
[B]0.mod auto brightness level(11 levels with each 20~25 up) and turn down brightness, make it more smooth and battery saving
1.fix compass chaos problem thanks to aceoyame in RootzWiki
2.fix random SD mounting issue in CWM4.x
3.expand touch points to 6
4.remove ninetals and speed up UI, but make it optional via patch (attachment below)
5.fix CPU governor, all available governors are:
conservative[default]
smartass
interactive
powersaver
ondemand
userspace
performance
6.CPU downvolted
1000-50
800-39
600-30
300-17
6.Enhance dialer + crystal talk + location info for ch
7.Enhance bootmenu CPU tool
8.fix white USB charger light, working now
9.fix APN issue in 0901 version
10.improve GPS/WIFI
11.Should fix battery juming and improve battery charging
12.fix keyboard half size in horizontal mode
13.add Battery Calibration/MS2 baseband switcher/rootexplorer(EN)
14.remove DEFY basebandswticher/FM/IO
15.baseband changed to GB leak
16.some more tweaks in framework-res.apk and build.prop.
17.fingerprint restored to CM7 default.
18.disable camera button turning on screen[/B]
[B]For QWERTZ keyboard, see attachment.
[/B]
[B][COLOR="Blue"]Download: [URL="http://www.mirrorcreator.com/files/1V61C8YZ/EndlessCM7-110901-nightly_build.zip_links"]EndlessCM7-110901-nightly_build.zip[/URL][/COLOR][/B][/QUOTE]
[QUOTE][COLOR="Blue"][B]Changelog for initial release:[/B][/COLOR]
[COLOR="Red"][B][Features][/B][/COLOR]
[B]1.New cool [I]"ninetales"/"九尾"[/I] windows animation
2.Moded spareparts.apk, you can set windows animation speed by yourself
3.Dual-Way call recording with Voice 360 [/B]
[COLOR="Red"][B][Fixed][/B][/COLOR]
[B]1.Usb connection
2.formatting and restore /data via CWM
3.now overclock setting in Bootmenu works
4.fix CPU governors
5.keyboard mapping and backlight (Both QWERTY and QWERTZ)
6.gravity/light sensor
7.GSM signal
8.camera upside down
9.re-enable dual-way call recording
10.stock keyboard half size[/B]
[COLOR="red"][B][MOD][/B][/COLOR]
[B]1.Undervolt and default CPU governor set to [I]conservative[/I]
1000---49
800---39
600---30
300---17
2.Add [I]"ninetales"/"九尾"[/I] windows animation
3.update superuser and su to 3.0 beta 4
4.add full latest gapps inside
5.bootanimation changed
6.vm heap set to 48m
7.touch point set to 4
8.sd card cache set to 2048
9.wifi scan internal set to 180
10.enable hw accelerate
11.And some other tweaks in buid.prop
12.Disable LED chager light by replacing file
13.Disable camera and video recording sound. And low-battery beep
14.freeze fmradio.apk+fmradioservices.apk(no hardware support) and filemanager.apk
15.add:
debouncea.apk
rootexplorer.apk
voice360.apk
ADWlauncher.apk(latest version, the stock version is laggy)
to system/app/
16.you can use camera button to turn on screen
17.add anti-ad hosts
18.phone version change to A953[/B]
[COLOR="Blue"][B]Direct link by chibani: [URL="http://android.loicg.net/roms/CM7-0828-nightly-build-all_in_1.zip"]Download all-in-one.zip[/URL] [/B][/COLOR][/QUOTE]
Reserved......
Reserved......
Endless7 said:
Reserved......
Click to expand...
Click to collapse
hello friend I want to thank him for the first rom (use forum cyanogem 7 ice Crean theme in android development) she is wonderful but what I could tell her and that led in the device options options is not working and my battery falls a lot when I'm using network data or playing some game ... any idea about it? I apologize for my horrible english because I'm using google translator
Sent from my MotoA953 using xda premium
I think this topic is no longer needed most.
Please a moderator to review it.
Thank you.
What?? How can you say it? Endless7 created it yesterday and you say it's no more needed... What rights do you have to make that decisions? *facepalm*
Hi ,
I've just moved from cm7 to MIUI
Everything seems to be ok , apart from the fact the whole phone freezes for 2-5 seconds often. During this time the display doesn't change anything on the screen and the hardware buttons do not work.
So for example, if your moving left/right between the home screens - when the freeze happens it will show half of one home screen and half of the other.
It doesn't matter what your doing - there is no pattern to it. Its so annoying.
I've looked in the main thread for MIUI but found anything. Any ideas?
1) are you using latest build?
2) did you wipe cache AND data AND dalvik?
3) if nothing of above helps, then try to change vsel and/or default cpu clock
... I'm using MIUI for a while and I don't experience that problems
thanks for reply:
1) I think so - 1.12.16
2) Yep , wiped factory and cache x2 just to make sure.
3) this could be what Im after.
I've installed Milestone2 Toolbox and the overclock tool is showing
Clock 1 - 300 Vsel 17
Clock 2 - 600 Vsel 32
Clock 3 - 900 Vsel 44
Clock 4 - 1200 Vsel 60
I've tried flashing the Stock cpu/vsel values zip on the first page on the main thread: ( [ROM] [12/18] MIUI 1.12.16 GB 2.3.7 + ICS Multilanguage for Milestone 2!)
It seems that it hasnt worked - but I will try again.
NOTE - My MS2 has not rebooted itself like a lot of people who are having problems.
I tried again flashing the stock values zip from Clockwork - it looked like it worked.
Going into milestone2 toolbox however the values listed above are correct.
As such , I've changed the values manually using the milestone2 toolbox to endless cm7 values as specfied on page 35 of the main thread:
http://forum.xda-developers.com/showthread.php?t=1258073&page=35
After a few mins of use - it hasn't frozen yet.
Will give it a few hours and see how it behaves.
just to let you all know the changes above seemed to have worked
Disclaimer: I am not responsible for any damage (including, but not limited to, loss of data, non-functional device etc.) which may occur to your device from following the directions (or from any failure to follow the directions) found on this post. Use (and flash) at your own risk.
Credits go to genokolar for actually porting the U8860 2.3.6 firmware to the U8800Pro. This builds upon his port.
You may find his port announcement here, and you can download it from here. Thanks to user Skyline111 for the mirror.
Thanks also go to birdyi, who ported the U8860 2.3.6 firmware to the U8860. His port contained some brilliant things such as CarrierIQ framework removal.
--
This is a 2.3.6 ROM for the U8800Pro based on the U8860 B866 ROM. 2.3.6, naturally, brings a slightly newer version of Gingerbread compared to our 2.3.5 with B540. While I know it's all about CM9 (ICS), MIUI and so on these days, I'm a fan of stock (in the Huawei sense of the term) Gingerbread.
Features (or limitations depending on what you think of some of the following entries) of this ROM:
Rooted (adb also runs as root, too)
(Huawei) DLNA
(Huawei) A task manager that shows open applications with pictures (launching it when pressing Home has disabled in this modification because I found the Recent menu saves more time)
(Huawei) Security Guard, a way of hiding text messages, I think
(Huawei) Traffic Manager – a data counter
(Huawei) Wi-Fi WPS support
(Genokolar) FPS unlocked by default (configurable in enhanced.conf)
(Genokolar) ZRAM (Compcache) enabled
(Genokolar) Changed the autorun.iso path to the image partition so that formatting /data from CWM does not leave you with an empty CD-ROM drive when you plug the phone into a computer
bugreports service turned off entirely so that pressing the volume up button quickly after you've pressed volume down does not leave you with a few seconds' delay and a bugreports folder on your memory card
BusyBox from CM7
Android’s toolbox (poor coreutils replacement; more barebones than BusyBox) has its full set of links installed in /system/bin, so you use Android’s native chmod etc. tools. Why? To match the stock B512 firmware and to ensure developers testing on the U8800Pro correctly hardcode “busybox” in their root programs if needed
Optional lazy CPUfreq governor
Default language and region changed from Chinese – China to English – United Kingdom
Added in boombuler’s AppWidgetPicker
CM7’s Pacman added in to remind you to install Google Apps after adding an account with the Setup Wizard (make sure GApps is installed!)
VoiceDialler.apk added in from B512 firmware (although, to be honest, the microphone quality on my phone is awful…)
Bash shell, fix_permissions script, iwmulticall, MMS.apk, tcpdump and gdbserver and additional ringtones etc. from CyanogenMod (20120107-cm-7.1.0-u8800pro-Geno-en.zip) added in
Phone model changed to Desire HD, so Gameloft games can be bought. This may cause licensing problems with bought Market applications so be careful. (Although, I must admit that giving money to a company that doesn't support our phone seems counter-intuitive.)
Shutdown vibration reduced from 500ms to 100ms because I hate it (especially at night) but understand its usefulness in determining the answer to the question “Has the phone gone off yet?”
Huawei’s god-awful Low Battery notification replaced with a nicer one from CyanogenMod
Widgets actually restore themselves after a reboot! This was fixed by me replacing 2.3.6's PackageManager service with Huawei's 2.3.5 one.
MyCalendar widget from birdyi's port and MyEmail from B512 added in
Fixed proximity sensor dying if the light sensor was on, too.
Stripped down enhanced.conf - only swappiness, VSync and ZRAM settings available. I don't like /system/log.txt being created every time my phone boots and I think using a tool in Android like, say, No-frills CPU Control is the better place to set the frequency. SetXperia has support for setting the phone's CPU voltage.
More languages selectable from the Setup Wizard than just English (US) and Chinese.
Flash Player removed for copyright reasons. You can install it from the Market
Notepad and Richpad removed
Droid Sans Fallback supports more character ranges
Toolbox correctly has "Wi-Fi" instead of "WLAN"
Misc. kernel modules, like in B512, included
But I like the BusyBox tools and want to use them without having to prefix BusyBox everytime!
Just run the bash shell; BusyBox versions of cat, chmod, chown, df, insmod, ln, lsmod, mkdir, mount, mv, rm, rmdir, rmmod, umount, sleep, kill, and ifconfig will become the default while you’re using the bash shell (also nicer, BTW: you get tab-completion, for one) thanks to the CyanogenMod team.
Attempts to remove Carrier IQ. Huawei *do* include Carrier IQ in their firmware.
I’ve done the following to attempt to remove it the best I can:
Edited boot.img to not start Carrier IQ services
Removed Carrier IQ libraries from /system/lib and CiQ binaries from /system/bin
Added lines to build.prop to disable CarrierIQ, taken from the framework.jar file itself.
birdyi has also modified framework.jar to stop the CarrierIQ objects from being instantiated.
Ideally the best way to be Huawei-free is to use CyanogenMod.
I've removed the Cloud+ apps because of this. I've left some Huawei apps in, but I strongly recommend you install PDroid (the patcher works fine with this ROM) and block the more concerning permissions of Huawei system apps.
Kernel changes
Since the kernel genokolar provided with his port had a problem when a program used the light and proximity sensor at the same time – the proximity sensor would die out until the next restart – I took it upon myself to rebuild the kernel available from his github repository with the config from his latest kernel. After comparing his kernel to the source Huawei put out, I could see no code changes that would cause the proximity sensor to die out. Since I was rebuilding the kernel, I thought I’d make a few changes:
Add in the Lazy CPU governor by Ezekeel
Update a patch by stockwell to disable keypad lights (echo 1 > /sys/module/leds_msm_pmic/parameters/disable_button_leds) - use ButtonLock to control
Reverse genokolar’s decision to always allow NV logging – this can be turned on and off from the service menu on a stock ROM anyway…
Set minimum backlight level to 15, from Franco’s kernel. Warning: I haven’t tried setting it to 15 so I don’t know if that value renders the display practically useless, and I don’t know if Android lets you set it to 15 from its settings!
ButtonLock
Not as revolutionary as I'd like it to be, but useful nevertheless. I've written a quick widget, which looks like the Power Saving one, that turns off the button backlight. Useful for when you're reading books through FBReader.
You need to be using my kernel as it has the disable_button_leds patch. The advantage the disable_button_leds patch has over the chmod 444 method is that it doesn't introduce noticable lag. The widget's source is in the same folder.
When pressing the widget's button for the first time, there is a delay as the Superuser allow/deny dialog box takes its time to come up. After accepting, future launches are instantaneous.
If you need something that this ROM doesn’t provide compared to other stock ROMs, I recommend:
Not using it; or
Using a combination of diff, abootimg, Winmerge (or Beyond Compare) and apktool to compare this with genokolar’s original release, and with birdyi's ROM, and add what you want back in
Installation
Note: You must be running firmware version B522 on your device! If you have B540, you need to downgrade. If you have a firmware version lower than B522 (Froyo?), you must upgrade to B522 first. If you're already running a custom ROM, ignore this.
Take out the SIM card if you want the setup wizard to use Wi-Fi during setup.
Install genokolar’s recovery: http://forum.xda-developers.com/showthread.php?t=1343276
Place u8800pro-2.3.6-geno-v1-modified.zip on the internal memory card or an external one (I recommend the internal one to ensure you don’t run into U8800Pro CWM bugs with the external).
Get gapps for Gingerbread and place on your memory card. Find the link using every Android user’s favourite search engine.
I highly recommend using PDroid, but it’s up to you whether you want to use it. If you would like to use it, get the patcher from http://forum.xda-developers.com/showthread.php?t=1357056 and point it to u8800pro-2.3.6-geno-v1-modified.zip. Place the PDroid-v1.27-u8800pro-2.3.6-geno-v1-modified.zip file onto your memory card.
Boot into recovery (make sure that fast boot is turned off in Settings->Applications and hold power and volume up while turning the phone on)
Do a data/factory reset.
Install the ZIPs, starting with u8800pro-2.3.6-geno-v1-modified.zip (obviously).
Reboot!
Install the Google apps (those ones not included in CM's gapps ZIP like YouTube) if desired when prompted – but note that the Market will probably close as you’re doing this as it will automatically update itself.
Downloads
ROM: http://www.mediafire.com/?k0g17z1kraw7b67
SHA512: 4988B123488B8B24732401420DE849E8D8E5632C075A4520F176AA1D64DA0ECF946FF4D4E6CEC4D257EE4C4C999200A93C2CB309FD7B5FE50234A1C5700DEB2D
Modified kernel source (I suck at Git - I really need to read that VCS by Example book I have ): http://www.mediafire.com/download.php?a0022t73q2v7r7d
ButtonLock source (Apache licensed, though I must admit I'm more of a GPL person...): attached.
--
Extras:
genokolar's 5.0.27 recovery for the U8800Pro with the charging animations from https://github.com/Victor-android/android_device_huawei_u8800pro/tree/master/recovery/res/images:
attached.
Anyone tried it?
ill try it this evening I hope it fixes missed calls....
I have B512 official gingerbread, am I good to go?
Too times was a situation, when phone lost connection with wi-fi spot, he see the network, but can't connect. Help reboot.. else working so far without problems, testing..
...
turned off the wi-fi and got the main bug - does not work 3g/2g data transfer, hmm....
bobsido said:
with wi-fi spot, he see the network, but can't connect. Help reboot.. else working so far without problems, testing..
Click to expand...
Click to collapse
Interesting. I've had no problems reconnecting to a network that uses WPA2-PSK and another that uses 802.11x authentication.
turned off the wi-fi and got the main bug - does not work 3g/2g data transfer, hmm....
Click to expand...
Click to collapse
Are your APNs set correctly? In my case 2G works and I've had HSDPA working because when testing the Weather Clock widget (from B522, when I had it in) it would connect using it - I could see the icon in the status bar - and I had the pleasure of having my balance run down each time - I'm not a rich man
Edit: In build.prop, you can try playing with ro.config.hw_fast_dormancy=3 - genokolar had it set to 2, but I changed it back to 3 from the U8800Pro original ROM because I wouldn't be able to connect to my network otherwise.
Hopefully, it's not the case but it could be hardware differences. genokolar, who's work this is based on, being from China, probably has a Unicom U8800Pro, just like I do...
@Zaic
B512? This is for the U8800Pro. I'd advise you not to flash it. I'd recommend using birdyi's ROM. If you're after a certain improvement from this ROM, tell me and I'll try and isolate it for you (as long as it doesn't involve kernel stuff - I don't know how to build U8800 kernels) so that you can use with birdyi's ROM
I have u8800 pro - 100%
My ROM is original unrooted 2.3.5 B512 its one before the latest release which is B540
My ROM still has access to pink screen, otherwise its the same as B540 I guess
SO what should I do first to install this ROM? roll back to 2.2.2 or was it 2.2.3?
Ah, if you're running 2.3.5 already and in the pink screen mode you see a folder called image when connecting your phone to the computer you're ready to go
Hi!
My compliments for the porting of Android 2.3.6 to U8800Pro!
I am using your rom since yesterday and still now I am not having any kind of problems.
Anyway I notice the same bug of the B512 and B540 roms: put your smartphone on screenoff, then wait about 1 minute and fastly unlock the screen and try to pinch to zoom on the home. Sometimes the multitouch doesn't work on every position of your fingers, it only works correctly if your fingers are in the position of principal axes.
Please try to reproduce this bug.
I am using LauncherPro but this bug is indipendent by the launcher (for example I tried also Zeam Launcher, Go Launcher EX, etc etc).
I hope you can solve this bug, maybe kernel-related.
Regards,
kalo86
Hi,
kalo86 said:
My compliments for the porting of Android 2.3.6 to U8800Pro!
Click to expand...
Click to collapse
The honor is genokolar's
I am using your rom since yesterday and still now I am not having any kind of problems.
Click to expand...
Click to collapse
Thanks; it's nice to know that it's working OK on somebody else's device other than mine.
Anyway I notice the same bug of the B512 and B540 roms: put your smartphone on screenoff, then wait about 1 minute and fastly unlock the screen and try to pinch to zoom on the home. Sometimes the multitouch doesn't work on every position of your fingers, it only works correctly if your fingers are in the position of principal axes.
Click to expand...
Click to collapse
Sorry for asking, but how do you pinch to zoom on the home screen? I'm using Go Launcher Ex and I know that that has the swipe up gesture but I can activate that with one finger, anyway.
In any case, have you applied the Synaptics touchscreen update? For me it has increased the touchscreen performance greatly. I had one problem that when after unlocking, the touchscreen wouldn't respond unless I turned the screen off and tried again. The update solved that.
If you want to try it, open the service menu (*#*#2846579#*#*), go to ProjectMenu->Upgrade->Touch screen version query and see if it says "synaptics". If so, put the original Huawei recovery.img back on and put the synaptics.img file in a folder called update on your SD card. Use the recovery's "touchscreen firmware update" update option and it will automatically reboot when it's done.
Best regards,
qwerty12
Oh, really thank you for this "news" about the synaptics touchscreen update!
I have a synaptics too, then I am going to update the firmware.
Another bug, still present in B512, B540, Cyanogen and U8860 port: unplug your battery from the smartphone, insert it again, power on, then open your file manager and try to read the sdcard content. At 99% my sdcard is not read, then I have to reboot my U8800Pro and magically the sdcard is read.
Thanks to You and Genokolar for our development!
Regards,
kalo86
UPDATE: I updated the synaptics touchpanel but I have always the bug of multitouch. It is reproducible when you unlock the screen after a pause of 1 minute (about), then you open the stock browser and try to zoom with the multitouch. It works only if your fingers are on the principal axes and not in other positions. I have this bug on 4 different U8800 Pro! It cannot be a singular problem.
So, I have tried a lot of roms, based on B512, B540, U8860, CyanogenMod 7.1, I am sure I will try this bug on the next release because it's mabe a kernel bug due to the multitouch field.
Video demonstration
This is a video which I just uploaded on YouTube with the real multitouch bug.
This bug is in 4 different U8800 Pro.
http://www.youtube.com/watch?v=avSdW2V8TLg
kalo86 said:
Another bug, still present in B512, B540, Cyanogen and U8860 port: unplug your battery from the smartphone, insert it again, power on, then open your file manager and try to read the sdcard content. At 99% my sdcard is not read, then I have to reboot my U8800Pro and magically the sdcard is read.
Click to expand...
Click to collapse
I really can't reproduce this. I pulled out the battery while it was on, put it back in and started File manager (the one included with Huawei ROMs) and the internal SD card along with my external one were seen fine.
UPDATE: I updated the synaptics touchpanel but I have always the bug of multitouch. It is reproducible when you unlock the screen after a pause of 1 minute (about), then you open the stock browser and try to zoom with the multitouch. It works only if your fingers are on the principal axes and not in other positions. I have this bug on 4 different U8800 Pro! It cannot be a singular problem.
So, I have tried a lot of roms, based on B512, B540, U8860, CyanogenMod 7.1, I am sure I will try this bug on the next release because it's mabe a kernel bug due to the multitouch field.
Click to expand...
Click to collapse
Thanks for the video! Unfortunately I don't know how this can be fixed - I'm not a developer! It was only yesterday I tried looking in the driver to see how I can enable more than two finger recognition but I'm not seeing it...
Best regards,
qwerty12
Sorry for disturbing you, but I have a question: do you have the same bug of the multitouch after the lock-screen?
This is a second video about the same problem:
http://youtu.be/64NvbFJD3rs
qwerty12 said:
I really can't reproduce this. I pulled out the battery while it was on, put it back in and started File manager (the one included with Huawei ROMs) and the internal SD card along with my external one were seen fine.
Click to expand...
Click to collapse
The same here with sd,full power off device, power on then sd card is not mounted and cpu load is almost 100%. after restart or reinserting sd, problem just dissapear. on every rom i tried. i flashed official V100R001C00B512G001Gb (2.3.5) and then tried CM7; u8800+v100r001c00b540g001gb-rooted_geno-v4.
Is FM Radio working in this ROM?
Yes, Radio is working fine
qwerty12 said:
Are your APNs set correctly?
Click to expand...
Click to collapse
i fix APN settings and 3g/2g start work, thanks.. after reflashing wi-fi start work without problem. but after first reflash don`t work home button. they have response, but nothing happen. i secondary reflash phone, without wipe data/cash and home button start to work correct.. now tests are continuing
kalo86 said:
Sorry for disturbing you, but I have a question: do you have the same bug of the multitouch after the lock-screen?
This is a second video about the same problem:
http://youtu.be/64NvbFJD3rs
Click to expand...
Click to collapse
A little bit - after unlocking, I can do the multitouch gesture and phone will respond like it's supposed to but I have seen twice that it has not responded to me; I have to do it twice more...
Barracuda72 said:
Is FM Radio working in this ROM?
Click to expand...
Click to collapse
Like kalo86 said, it is indeed
bobsido said:
i fix APN settings and 3g/2g start work, thanks.. after reflashing wi-fi start work without problem. but after first reflash don`t work home button. they have response, but nothing happen. i secondary reflash phone, without wipe data/cash and home button start to work correct.. now tests are continuing
Click to expand...
Click to collapse
Please do let me know if you come across more problems
Zaic said:
Anyone tried it?
ill try it this evening I hope it fixes missed calls....
I have B512 official gingerbread, am I good to go?
Click to expand...
Click to collapse
So, any missed calls?
If someone wants to help the Community to understand the sdcard mount bug, please have a look here: http://forum.xda-developers.com/showthread.php?t=1483519
This is a poll, please vote!
Best regards,
kalo86
Zyzas said:
So, any missed calls?
Click to expand...
Click to collapse
Haven't had time to install this ROM yet.... but ill report as soon as I know