Related
Disclaimer: I am not responsible for any damage (including, but not limited to, loss of data, non-functional device etc.) which may occur to your device from following the directions (or from any failure to follow the directions) found on this post. Use (and flash) at your own risk.
Credits go to genokolar for actually porting the U8860 2.3.6 firmware to the U8800Pro. This builds upon his port.
You may find his port announcement here, and you can download it from here. Thanks to user Skyline111 for the mirror.
Thanks also go to birdyi, who ported the U8860 2.3.6 firmware to the U8860. His port contained some brilliant things such as CarrierIQ framework removal.
--
This is a 2.3.6 ROM for the U8800Pro based on the U8860 B866 ROM. 2.3.6, naturally, brings a slightly newer version of Gingerbread compared to our 2.3.5 with B540. While I know it's all about CM9 (ICS), MIUI and so on these days, I'm a fan of stock (in the Huawei sense of the term) Gingerbread.
Features (or limitations depending on what you think of some of the following entries) of this ROM:
Rooted (adb also runs as root, too)
(Huawei) DLNA
(Huawei) A task manager that shows open applications with pictures (launching it when pressing Home has disabled in this modification because I found the Recent menu saves more time)
(Huawei) Security Guard, a way of hiding text messages, I think
(Huawei) Traffic Manager – a data counter
(Huawei) Wi-Fi WPS support
(Genokolar) FPS unlocked by default (configurable in enhanced.conf)
(Genokolar) ZRAM (Compcache) enabled
(Genokolar) Changed the autorun.iso path to the image partition so that formatting /data from CWM does not leave you with an empty CD-ROM drive when you plug the phone into a computer
bugreports service turned off entirely so that pressing the volume up button quickly after you've pressed volume down does not leave you with a few seconds' delay and a bugreports folder on your memory card
BusyBox from CM7
Android’s toolbox (poor coreutils replacement; more barebones than BusyBox) has its full set of links installed in /system/bin, so you use Android’s native chmod etc. tools. Why? To match the stock B512 firmware and to ensure developers testing on the U8800Pro correctly hardcode “busybox” in their root programs if needed
Optional lazy CPUfreq governor
Default language and region changed from Chinese – China to English – United Kingdom
Added in boombuler’s AppWidgetPicker
CM7’s Pacman added in to remind you to install Google Apps after adding an account with the Setup Wizard (make sure GApps is installed!)
VoiceDialler.apk added in from B512 firmware (although, to be honest, the microphone quality on my phone is awful…)
Bash shell, fix_permissions script, iwmulticall, MMS.apk, tcpdump and gdbserver and additional ringtones etc. from CyanogenMod (20120107-cm-7.1.0-u8800pro-Geno-en.zip) added in
Phone model changed to Desire HD, so Gameloft games can be bought. This may cause licensing problems with bought Market applications so be careful. (Although, I must admit that giving money to a company that doesn't support our phone seems counter-intuitive.)
Shutdown vibration reduced from 500ms to 100ms because I hate it (especially at night) but understand its usefulness in determining the answer to the question “Has the phone gone off yet?”
Huawei’s god-awful Low Battery notification replaced with a nicer one from CyanogenMod
Widgets actually restore themselves after a reboot! This was fixed by me replacing 2.3.6's PackageManager service with Huawei's 2.3.5 one.
MyCalendar widget from birdyi's port and MyEmail from B512 added in
Fixed proximity sensor dying if the light sensor was on, too.
Stripped down enhanced.conf - only swappiness, VSync and ZRAM settings available. I don't like /system/log.txt being created every time my phone boots and I think using a tool in Android like, say, No-frills CPU Control is the better place to set the frequency. SetXperia has support for setting the phone's CPU voltage.
More languages selectable from the Setup Wizard than just English (US) and Chinese.
Flash Player removed for copyright reasons. You can install it from the Market
Notepad and Richpad removed
Droid Sans Fallback supports more character ranges
Toolbox correctly has "Wi-Fi" instead of "WLAN"
Misc. kernel modules, like in B512, included
But I like the BusyBox tools and want to use them without having to prefix BusyBox everytime!
Just run the bash shell; BusyBox versions of cat, chmod, chown, df, insmod, ln, lsmod, mkdir, mount, mv, rm, rmdir, rmmod, umount, sleep, kill, and ifconfig will become the default while you’re using the bash shell (also nicer, BTW: you get tab-completion, for one) thanks to the CyanogenMod team.
Attempts to remove Carrier IQ. Huawei *do* include Carrier IQ in their firmware.
I’ve done the following to attempt to remove it the best I can:
Edited boot.img to not start Carrier IQ services
Removed Carrier IQ libraries from /system/lib and CiQ binaries from /system/bin
Added lines to build.prop to disable CarrierIQ, taken from the framework.jar file itself.
birdyi has also modified framework.jar to stop the CarrierIQ objects from being instantiated.
Ideally the best way to be Huawei-free is to use CyanogenMod.
I've removed the Cloud+ apps because of this. I've left some Huawei apps in, but I strongly recommend you install PDroid (the patcher works fine with this ROM) and block the more concerning permissions of Huawei system apps.
Kernel changes
Since the kernel genokolar provided with his port had a problem when a program used the light and proximity sensor at the same time – the proximity sensor would die out until the next restart – I took it upon myself to rebuild the kernel available from his github repository with the config from his latest kernel. After comparing his kernel to the source Huawei put out, I could see no code changes that would cause the proximity sensor to die out. Since I was rebuilding the kernel, I thought I’d make a few changes:
Add in the Lazy CPU governor by Ezekeel
Update a patch by stockwell to disable keypad lights (echo 1 > /sys/module/leds_msm_pmic/parameters/disable_button_leds) - use ButtonLock to control
Reverse genokolar’s decision to always allow NV logging – this can be turned on and off from the service menu on a stock ROM anyway…
Set minimum backlight level to 15, from Franco’s kernel. Warning: I haven’t tried setting it to 15 so I don’t know if that value renders the display practically useless, and I don’t know if Android lets you set it to 15 from its settings!
ButtonLock
Not as revolutionary as I'd like it to be, but useful nevertheless. I've written a quick widget, which looks like the Power Saving one, that turns off the button backlight. Useful for when you're reading books through FBReader.
You need to be using my kernel as it has the disable_button_leds patch. The advantage the disable_button_leds patch has over the chmod 444 method is that it doesn't introduce noticable lag. The widget's source is in the same folder.
When pressing the widget's button for the first time, there is a delay as the Superuser allow/deny dialog box takes its time to come up. After accepting, future launches are instantaneous.
If you need something that this ROM doesn’t provide compared to other stock ROMs, I recommend:
Not using it; or
Using a combination of diff, abootimg, Winmerge (or Beyond Compare) and apktool to compare this with genokolar’s original release, and with birdyi's ROM, and add what you want back in
Installation
Note: You must be running firmware version B522 on your device! If you have B540, you need to downgrade. If you have a firmware version lower than B522 (Froyo?), you must upgrade to B522 first. If you're already running a custom ROM, ignore this.
Take out the SIM card if you want the setup wizard to use Wi-Fi during setup.
Install genokolar’s recovery: http://forum.xda-developers.com/showthread.php?t=1343276
Place u8800pro-2.3.6-geno-v1-modified.zip on the internal memory card or an external one (I recommend the internal one to ensure you don’t run into U8800Pro CWM bugs with the external).
Get gapps for Gingerbread and place on your memory card. Find the link using every Android user’s favourite search engine.
I highly recommend using PDroid, but it’s up to you whether you want to use it. If you would like to use it, get the patcher from http://forum.xda-developers.com/showthread.php?t=1357056 and point it to u8800pro-2.3.6-geno-v1-modified.zip. Place the PDroid-v1.27-u8800pro-2.3.6-geno-v1-modified.zip file onto your memory card.
Boot into recovery (make sure that fast boot is turned off in Settings->Applications and hold power and volume up while turning the phone on)
Do a data/factory reset.
Install the ZIPs, starting with u8800pro-2.3.6-geno-v1-modified.zip (obviously).
Reboot!
Install the Google apps (those ones not included in CM's gapps ZIP like YouTube) if desired when prompted – but note that the Market will probably close as you’re doing this as it will automatically update itself.
Downloads
ROM: http://www.mediafire.com/?k0g17z1kraw7b67
SHA512: 4988B123488B8B24732401420DE849E8D8E5632C075A4520F176AA1D64DA0ECF946FF4D4E6CEC4D257EE4C4C999200A93C2CB309FD7B5FE50234A1C5700DEB2D
Modified kernel source (I suck at Git - I really need to read that VCS by Example book I have ): http://www.mediafire.com/download.php?a0022t73q2v7r7d
ButtonLock source (Apache licensed, though I must admit I'm more of a GPL person...): attached.
--
Extras:
genokolar's 5.0.27 recovery for the U8800Pro with the charging animations from https://github.com/Victor-android/android_device_huawei_u8800pro/tree/master/recovery/res/images:
attached.
Anyone tried it?
ill try it this evening I hope it fixes missed calls....
I have B512 official gingerbread, am I good to go?
Too times was a situation, when phone lost connection with wi-fi spot, he see the network, but can't connect. Help reboot.. else working so far without problems, testing..
...
turned off the wi-fi and got the main bug - does not work 3g/2g data transfer, hmm....
bobsido said:
with wi-fi spot, he see the network, but can't connect. Help reboot.. else working so far without problems, testing..
Click to expand...
Click to collapse
Interesting. I've had no problems reconnecting to a network that uses WPA2-PSK and another that uses 802.11x authentication.
turned off the wi-fi and got the main bug - does not work 3g/2g data transfer, hmm....
Click to expand...
Click to collapse
Are your APNs set correctly? In my case 2G works and I've had HSDPA working because when testing the Weather Clock widget (from B522, when I had it in) it would connect using it - I could see the icon in the status bar - and I had the pleasure of having my balance run down each time - I'm not a rich man
Edit: In build.prop, you can try playing with ro.config.hw_fast_dormancy=3 - genokolar had it set to 2, but I changed it back to 3 from the U8800Pro original ROM because I wouldn't be able to connect to my network otherwise.
Hopefully, it's not the case but it could be hardware differences. genokolar, who's work this is based on, being from China, probably has a Unicom U8800Pro, just like I do...
@Zaic
B512? This is for the U8800Pro. I'd advise you not to flash it. I'd recommend using birdyi's ROM. If you're after a certain improvement from this ROM, tell me and I'll try and isolate it for you (as long as it doesn't involve kernel stuff - I don't know how to build U8800 kernels) so that you can use with birdyi's ROM
I have u8800 pro - 100%
My ROM is original unrooted 2.3.5 B512 its one before the latest release which is B540
My ROM still has access to pink screen, otherwise its the same as B540 I guess
SO what should I do first to install this ROM? roll back to 2.2.2 or was it 2.2.3?
Ah, if you're running 2.3.5 already and in the pink screen mode you see a folder called image when connecting your phone to the computer you're ready to go
Hi!
My compliments for the porting of Android 2.3.6 to U8800Pro!
I am using your rom since yesterday and still now I am not having any kind of problems.
Anyway I notice the same bug of the B512 and B540 roms: put your smartphone on screenoff, then wait about 1 minute and fastly unlock the screen and try to pinch to zoom on the home. Sometimes the multitouch doesn't work on every position of your fingers, it only works correctly if your fingers are in the position of principal axes.
Please try to reproduce this bug.
I am using LauncherPro but this bug is indipendent by the launcher (for example I tried also Zeam Launcher, Go Launcher EX, etc etc).
I hope you can solve this bug, maybe kernel-related.
Regards,
kalo86
Hi,
kalo86 said:
My compliments for the porting of Android 2.3.6 to U8800Pro!
Click to expand...
Click to collapse
The honor is genokolar's
I am using your rom since yesterday and still now I am not having any kind of problems.
Click to expand...
Click to collapse
Thanks; it's nice to know that it's working OK on somebody else's device other than mine.
Anyway I notice the same bug of the B512 and B540 roms: put your smartphone on screenoff, then wait about 1 minute and fastly unlock the screen and try to pinch to zoom on the home. Sometimes the multitouch doesn't work on every position of your fingers, it only works correctly if your fingers are in the position of principal axes.
Click to expand...
Click to collapse
Sorry for asking, but how do you pinch to zoom on the home screen? I'm using Go Launcher Ex and I know that that has the swipe up gesture but I can activate that with one finger, anyway.
In any case, have you applied the Synaptics touchscreen update? For me it has increased the touchscreen performance greatly. I had one problem that when after unlocking, the touchscreen wouldn't respond unless I turned the screen off and tried again. The update solved that.
If you want to try it, open the service menu (*#*#2846579#*#*), go to ProjectMenu->Upgrade->Touch screen version query and see if it says "synaptics". If so, put the original Huawei recovery.img back on and put the synaptics.img file in a folder called update on your SD card. Use the recovery's "touchscreen firmware update" update option and it will automatically reboot when it's done.
Best regards,
qwerty12
Oh, really thank you for this "news" about the synaptics touchscreen update!
I have a synaptics too, then I am going to update the firmware.
Another bug, still present in B512, B540, Cyanogen and U8860 port: unplug your battery from the smartphone, insert it again, power on, then open your file manager and try to read the sdcard content. At 99% my sdcard is not read, then I have to reboot my U8800Pro and magically the sdcard is read.
Thanks to You and Genokolar for our development!
Regards,
kalo86
UPDATE: I updated the synaptics touchpanel but I have always the bug of multitouch. It is reproducible when you unlock the screen after a pause of 1 minute (about), then you open the stock browser and try to zoom with the multitouch. It works only if your fingers are on the principal axes and not in other positions. I have this bug on 4 different U8800 Pro! It cannot be a singular problem.
So, I have tried a lot of roms, based on B512, B540, U8860, CyanogenMod 7.1, I am sure I will try this bug on the next release because it's mabe a kernel bug due to the multitouch field.
Video demonstration
This is a video which I just uploaded on YouTube with the real multitouch bug.
This bug is in 4 different U8800 Pro.
http://www.youtube.com/watch?v=avSdW2V8TLg
kalo86 said:
Another bug, still present in B512, B540, Cyanogen and U8860 port: unplug your battery from the smartphone, insert it again, power on, then open your file manager and try to read the sdcard content. At 99% my sdcard is not read, then I have to reboot my U8800Pro and magically the sdcard is read.
Click to expand...
Click to collapse
I really can't reproduce this. I pulled out the battery while it was on, put it back in and started File manager (the one included with Huawei ROMs) and the internal SD card along with my external one were seen fine.
UPDATE: I updated the synaptics touchpanel but I have always the bug of multitouch. It is reproducible when you unlock the screen after a pause of 1 minute (about), then you open the stock browser and try to zoom with the multitouch. It works only if your fingers are on the principal axes and not in other positions. I have this bug on 4 different U8800 Pro! It cannot be a singular problem.
So, I have tried a lot of roms, based on B512, B540, U8860, CyanogenMod 7.1, I am sure I will try this bug on the next release because it's mabe a kernel bug due to the multitouch field.
Click to expand...
Click to collapse
Thanks for the video! Unfortunately I don't know how this can be fixed - I'm not a developer! It was only yesterday I tried looking in the driver to see how I can enable more than two finger recognition but I'm not seeing it...
Best regards,
qwerty12
Sorry for disturbing you, but I have a question: do you have the same bug of the multitouch after the lock-screen?
This is a second video about the same problem:
http://youtu.be/64NvbFJD3rs
qwerty12 said:
I really can't reproduce this. I pulled out the battery while it was on, put it back in and started File manager (the one included with Huawei ROMs) and the internal SD card along with my external one were seen fine.
Click to expand...
Click to collapse
The same here with sd,full power off device, power on then sd card is not mounted and cpu load is almost 100%. after restart or reinserting sd, problem just dissapear. on every rom i tried. i flashed official V100R001C00B512G001Gb (2.3.5) and then tried CM7; u8800+v100r001c00b540g001gb-rooted_geno-v4.
Is FM Radio working in this ROM?
Yes, Radio is working fine
qwerty12 said:
Are your APNs set correctly?
Click to expand...
Click to collapse
i fix APN settings and 3g/2g start work, thanks.. after reflashing wi-fi start work without problem. but after first reflash don`t work home button. they have response, but nothing happen. i secondary reflash phone, without wipe data/cash and home button start to work correct.. now tests are continuing
kalo86 said:
Sorry for disturbing you, but I have a question: do you have the same bug of the multitouch after the lock-screen?
This is a second video about the same problem:
http://youtu.be/64NvbFJD3rs
Click to expand...
Click to collapse
A little bit - after unlocking, I can do the multitouch gesture and phone will respond like it's supposed to but I have seen twice that it has not responded to me; I have to do it twice more...
Barracuda72 said:
Is FM Radio working in this ROM?
Click to expand...
Click to collapse
Like kalo86 said, it is indeed
bobsido said:
i fix APN settings and 3g/2g start work, thanks.. after reflashing wi-fi start work without problem. but after first reflash don`t work home button. they have response, but nothing happen. i secondary reflash phone, without wipe data/cash and home button start to work correct.. now tests are continuing
Click to expand...
Click to collapse
Please do let me know if you come across more problems
Zaic said:
Anyone tried it?
ill try it this evening I hope it fixes missed calls....
I have B512 official gingerbread, am I good to go?
Click to expand...
Click to collapse
So, any missed calls?
If someone wants to help the Community to understand the sdcard mount bug, please have a look here: http://forum.xda-developers.com/showthread.php?t=1483519
This is a poll, please vote!
Best regards,
kalo86
Zyzas said:
So, any missed calls?
Click to expand...
Click to collapse
Haven't had time to install this ROM yet.... but ill report as soon as I know
Exclusive MODDED ROM EQS-v2.0M
CS968 a RK3188 ChipSet Based TVBoX
AKA: TV01 [GeekBuying] CR11s [CloudNET2GO]
THIS VERSION HAS NATIVE 1080P KERNEL, NOT SAME AS V1.
IMPORTANT INFORMATION:
WE JUST LEARNED THERE ARE A FEW CS968/TV01/CR11s MODELS equipped with different WIFI/BT MODULES.
Thanks to dFenix we figured this out. [More info]
THIS ROM IS FOR AP6210 WIFI CHIP bundled devices, MAINBOARD VERSION 2.
So if you try this rom on other models you may loose your wifi connection.
Click to expand...
Click to collapse
IMPORTANT NOTICE:
THIS IS KIND OF BETA/ALPHA FIRMWARE OR WHATEVER YOU WANT TO CALL IT.
CURRENTLY I HAVE EXPERIENCED NONE PROBLEM AND IT SEEMS EVERYTHING INCLUDING 1080P MODE WORKS FINE.
THIS IS AN EXCLUSIVE ROM BECAUSE THERE ARE A FEW THINGS FACTORY FIRMWARE HAS NOT.
SYSTEM IS SAME AND NOTHING HAS BEEN MODIFIED EXCEPT SUPERUSER and BUILD.PROP, SO IF THERE IS A BUG THEN THAT IS FIRMWARE RELATED THIS ISN'T SUPER DUPER FIRMWARE AND DOESN'T HAVE SPECIAL KERNEL OR RECOVERY, EVERYTHINGS IS STOCK.
NOTE : LIBMEDIA.SO REPLACED, READ BELOW...
Factory Date : 09-12-2013 from CloudNET based CR11/s
Modification Date: 21-12-2013
NOTICE: THIS IS FOR 2 MPX VERSION, NOT FOR 5 MPX
You may harm your device, if you flash this firmware to 5 mpx camera version.
LCD Display density has been set to 240, if you need smaller icons and texts you can easily change by using preinstalled DPI changer program (May need root permission after first start).
Features:
Rooted [ You may notice a bit difference than v1 version, but it is normal ]
Build tweaks
TCP Tweaks (Buffering etc...)
Networking Tweaks
Wifi Tweaks (Signal etc...)
Multimedia Tweaks
Streaming Tweaks
HW Video Acceleration by default
Spoofed as Galaxy S3
Date format set to European
Timezone Europe GMT +1
Renewed bootanimation
Renewed wallpaper
Add: SuperSU.apk (Updated)
Add: LuckyPatcher (Updated)
Add: RootBrowser (NEW)
Add: OGYoutube with downloader [ Original YouTube still can be apartly installed ]
Add: Dolphin Browser 10.1.2
Add: Android Weather
Add: JetAudio
Add: Blueput Droid (NEW)
Add: Texdroider DPI (NEW)
Add: BSPlayer FREE (NEW)
Add: Cifs Manager (NEW)
Add: ESFile Explorer (NEW)
Add: Patched Libmedia.so (Many thanks hillyu from FreakTab, More info)
Updated : AddAway (Update)
Removed : All of useless chinese media stuff
Removed : Chrome
Removed : Search Box
Removed : Google Stuff (Search, maps, gmail, talk)
Removed : Email
Removed : XBMC Installer (Not everyone's taste)
Removed : A few more crap...
Exclusive test modules : Tun, Cifs*, NFS, NTFS and Xpad these modules are not installed by system, must be done manually from console/terminal.
Included CIFS MANAGER can do it for you, you don't need to install from terminal.
Exlusive bootanimation (Renewed)
Good working Remote Control.
Faster Internet browsing, smoother streaming, Very nice playing 1080p media from NAS DRIVE
*: It seems cifs module won't work properly, it is interesting because it was allright with K-R42 device but I'll search for it.
v2.0M CHANGES
NEW*: MultiWindow
*Needs Xposed Framework to be installed completely.
NEW*: Xposed Framework Installer
*Installation must be done via program self, then after reboot you may download modules as much as you want
REPLACED : BSPLAYER-> MX PLAYER FREE - No Codec pre-installed
REMOVED : JETAUDIO
UPDATE : LUCKY PATCHER, ADAWAY
UPDATE : DOLPHIN BROWSER 10.2.1
Re-Add : RKVideo player, RKExplorer
A few fixes that causes problems.
More optimized video playback (about 40 mbps mkv from network drive), more stable system.
LCD Density set to : 160 (Smaller icons and texts by default)
A little bit faster than 2.0 version.
Feel free to test or build new one, no words for future updates or versions etc.
FLASH WITH YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY FLASHING OR AFTER.
AnTuTu Results
Devhost / Mirror
password : cs968eqs
Firmware flashing guide.
[ HD QUALITY BOOT ANIMATIONS... ]http://forum.xda-developers.com/showthread.php?t=2612221
hi
Hi Equancy,
Is a small community of CS968 users here: freaktab.com/forumdisplay.php?165-CS968-CR11s-amp-similar-sticks
Would you like to share this rom there too?
fakotibor said:
Hi Equancy,
Is a small community of CS968 users here: freaktab.com/forumdisplay.php?165-CS968-CR11s-amp-similar-sticks
Would you like to share this rom there too?
Click to expand...
Click to collapse
Hi,
Yeah, it seems not much users have CS968 here in XDA but, I'm a member of XDA-Dev and I share what I have here, but you may share this thread on freaktab as yours if you wish.
I have no account on FreakTab and I don't think I may able to manage this thread on multiple forums.
So, I can answer questions only here and also publish updates of my rom.
Thanks for your interest.
Hi Equancy, I cant download this file.
(Error no: 1) Connection failure : User 'proxy_iamheman' has exceeded the 'max_user_connections' resource (current value: 10)
What seems to be the issue. please fix the link. Thanks.
resansid said:
Hi Equancy, I cant download this file.
(Error no: 1) Connection failure : User 'proxy_iamheman' has exceeded the 'max_user_connections' resource (current value: 10)
What seems to be the issue. please fix the link. Thanks.
Click to expand...
Click to collapse
Try primary download host (Devhost), its working flawlesly.
I guess mirror host has problem rightnow.
I've uploaded another Mirror-link working well.http://www.filedropper.com/showdownload.php/cs968051213eqsv2m
EQUANCY said:
Try primary download host (Devhost), its working flawlesly.
I guess mirror host has problem rightnow.
I'll make more mirrors soon.
Click to expand...
Click to collapse
OK This worked. Thanks.
resansid said:
OK This worked. Thanks.
Click to expand...
Click to collapse
Your welcome. :good:
Or you may try from here too.
@EQUANCY,
i tried your rom, looks good. few things are not wrking
1. xposed: i installed xposed framework, rebooted, then installed GravityBox, none of the tweaks in it wkrs. like transparent status bar/traffic meter.
after installing the GB and setting it up, i rebooted, but still not wrking.
2. window support is also not wrking. hv added some of the apps to wkr in window mode, but all run in full screen.
Have you tried these on ur rom ???
hanu_blr said:
@EQUANCY,
i tried your rom, looks good. few things are not wrking
1. xposed: i installed xposed framework, rebooted, then installed GravityBox, none of the tweaks in it wkrs. like transparent status bar/traffic meter.
after installing the GB and setting it up, i rebooted, but still not wrking.
2. window support is also not wrking. hv added some of the apps to wkr in window mode, but all run in full screen.
Have you tried these on ur rom ???
Click to expand...
Click to collapse
Yes,
Multi-window not working, but some features of Gravitybox well.
Actually I've put Multi-window by mistake, it was a bit late when I saw
However you may remove this app by following steps below.
1- Deactivate Multi-window app in Xposed modules menu (uncheck)
2- Reboot
3- Open RootBrowser and go to System/app directory
4- Long press on multi_window.apk and select Delete
I didn't tested all of modules and most of them are not working properly because of Tablet UI, I'll remove both application in next firmware mod.
Sorry for inconvenience, thanks for understanding.
Hi Equancy,
I am having issues with wifi direct. I can establish the wifi direct connection with the other device (Samsung Galaxy S3) just fine, I can send files from the box to the SG3, but I absolutely can't receive files sent from the SG3 to the box (I never even get the prompt).
I also tried to use the Superbeam app, and same story: I can send files out but not receive them.
Any clue? I am not sure whether this is specific to your ROM as I haven't tried with any other.
Cheers, Merry Christmas and Happy New Year to you.
daviddema said:
Hi Equancy,
I am having issues with wifi direct. I can establish the wifi direct connection with the other device (Samsung Galaxy S3) just fine, I can send files from the box to the SG3, but I absolutely can't receive files sent from the SG3 to the box (I never even get the prompt).
I also tried to use the Superbeam app, and same story: I can send files out but not receive them.
Any clue? I am not sure whether this is specific to your ROM as I haven't tried with any other.
Cheers, Merry Christmas and Happy New Year to you.
Click to expand...
Click to collapse
hi,
Thanks for your best wishes, hoping same for you.
For the issue,
Possible answer for WiFi Direct function is Firmware related, because I didn't touched any system file except su binary and build.prop.
I also tested by my self, receiving files from TVBox is working but transfering to the device isn't via SuperBeam.
As I said before, I suppose it is a firmware bug and must be reported.
And question is:
To who
However, you may ask other users who is using another firmware versions or custom roms.
Happy new years...
NFS help needed
I tried the rom on my cr11s and i must say its awesome except that its a bit slow.. i also can't get nfs to mount thru adb nor cifsmanager.. does the supplied nfs.ko support nfsv4? Everything else is working with no major issues.. thanks for the rom anyways...
PsychicSaint said:
I tried the rom on my cr11s and i must say its awesome except that its a bit slow.. i also can't get nfs to mount thru adb nor cifsmanager.. does the supplied nfs.ko support nfsv4? Everything else is working with no major issues.. thanks for the rom anyways...
Click to expand...
Click to collapse
It is very little bit slower than v1.1 but its not really noticable on 2D applications, can you specify what have you experienced actually?
I'm using a NTFS formatted NAS drive with no problem, even watching MKV files about 40-50 mbps rate. (NetGear ReadyNAS).
All of thoose modules have been supplied but not loaded by default need manually installed or you must add lines to the init.rc from system.
This can't be automatically because Kernel needs to be modified and I don't want to do that.
NFS module is actual module for RK3188.
If you more specify problem may be I can look it for you.
And for your consideration...
Some issues are FIRMWARE RELATED, because these firmwares aren't fully optimized, just generic RK3xxx roms.
Not good drivers at all...
And not all manyfacturers optimizes their own firmwares.
Produce and forget policy.
EQUANCY said:
hi,
Thanks for your best wishes, hoping same for you.
For the issue,
Possible answer for WiFi Direct function is Firmware related, because I didn't touched any system file except su binary and build.prop.
I also tested by my self, receiving files from TVBox is working but transfering to the device isn't via SuperBeam.
As I said before, I suppose it is a firmware bug and must be reported.
And question is:
To who
However, you may ask other users who is using another firmware versions or custom roms.
Happy new years...
Click to expand...
Click to collapse
I sent a email to cloudnetgo support, let's see what comes out (probably nothing...)
daviddema said:
I sent a email to cloudnetgo support, let's see what comes out (probably nothing...)
Click to expand...
Click to collapse
You've done very well my friend, please let us know if you get an answer from them.
EQUANCY said:
You've done very well my friend, please let us know if you get an answer from them.
Click to expand...
Click to collapse
I also tried to get screen mirroring to work with the wifidisplay app included in the ROM (is this also part of the original image or did you add it?).
Again, I can set up the mirroring connection between a Samsung Note 3 and the wifidisplay app, but then actual mirroring never happens. I suspect that whatever causes wifi direct not to work also causes the mirroring not to work... pity as this is would be a nice feature...
@EQUANCY,
I have a strange issue related to sound settings, its because of the stock firmware issue, hope you give some pointers on this
in the sound devices settings, there is input sound device and o/p sound device. I understand abt the output sound device, but what is the use of input sound device ? and is by default always set. Is there a way to disable the i/p device ?.
I ask this bcasue, my sound bar sony will cutoff the sound to other devices if the cs968 device is switched-off, if in on/standby mode, the sound passthorough (via cs968 )for other devices i hv connected to my soundbar. My guess is that since sound input device is checked(Radio button on), sound bar thinks that it has to pass through cs968. If i unplug the hmdi cable from cs968, the soundbar wrks fine.
My guess is that somewhere in the settings xml file, there shd be a way of disabling the sound input device.
I tried decompiling settings.apk and settingsprovider.apk searched all file with sound as filecontent key, but could not find anything related to disabling of sound input device.
can you help me on this ???
daviddema said:
I also tried to get screen mirroring to work with the wifidisplay app included in the ROM (is this also part of the original image or did you add it?).
Again, I can set up the mirroring connection between a Samsung Note 3 and the wifidisplay app, but then actual mirroring never happens. I suspect that whatever causes wifi direct not to work also causes the mirroring not to work... pity as this is would be a nice feature...
Click to expand...
Click to collapse
Wifi Display part of firmware self, I didn't add by myself and yes it is not working properly, I've read at somewhere this application supports only Nexus devices but I'm not sure.
hanu_blr said:
@EQUANCY,
I have a strange issue related to sound settings, its because of the stock firmware issue, hope you give some pointers on this
in the sound devices settings, there is input sound device and o/p sound device. I understand abt the output sound device, but what is the use of input sound device ? and is by default always set. Is there a way to disable the i/p device ?.
I ask this bcasue, my sound bar sony will cutoff the sound to other devices if the cs968 device is switched-off, if in on/standby mode, the sound passthorough (via cs968 )for other devices i hv connected to my soundbar. My guess is that since sound input device is checked(Radio button on), sound bar thinks that it has to pass through cs968. If i unplug the hmdi cable from cs968, the soundbar wrks fine.
My guess is that somewhere in the settings xml file, there shd be a way of disabling the sound input device.
I tried decompiling settings.apk and settingsprovider.apk searched all file with sound as filecontent key, but could not find anything related to disabling of sound input device.
can you help me on this ???
Click to expand...
Click to collapse
Disabling sound input?
As much as I know, the only sound input is internal microphone.
I real don't know the other sound inputs and als no clue about disabling it.
If you mean sound output such as Analog, Optical and HDMI then may be there is option but for input, I have no idea.
Sorry.
Uninstall Apps
How can I unistall app like bsplayer?
Thanks
Hi,
Open RootBrowser (usually opens in main directory) if not then got to Main Directory first then next to
\System\App
And long press the application which you want to remove and select Delete.
Or download a root uninstaller from market then uninstall what you want.
Hope this helps.
Installation
https://github.com/LegacyHuawei/local_manifests/wiki/Installation
Bugs
https://github.com/LegacyHuawei/local_manifests/wiki/Status
Downloads
https://basketbuild.com/devs/LegacyHuawei
Changelog
https://github.com/LegacyHuawei/local_manifests/wiki/CM12.1-changelog
If you have any bugs to report, open new issue at https://github.com/LegacyHuawei/local_manifests/issues
Do not enable KSM, as video encoder/decoder stops working.
HuaweiSettings
Charge current - allows you to set custom charging current. While this actually limits the current input, it effectively decreases or increases the available current transferred to the battery. This is useful in multiple ways:
Slower, but more effective charging. Your battery will last longer.
Faster charging when connected to USB. For example, USB charging is limited to 500mA, but newer PCs allow drawing up to 800mA or even more. This can be configured via the setting.
Manual override of non-standard charger allowing to draw more than 500mA.
Magnetic sensor calibration - lets you delete previous calibration information. This is useful to recalibrate the compass (when it's inaccurate). Just tap the item & then open any compass up to recalibrate your sensor.
If the phone reboots unexpectedly, crash log is found at /data/dontpanic .
To report bugs, use this app: https://play.google.com/store/apps/details?id=com.tortel.syslog
Thank you great work blefish @Blefish zip seems corrupted really size is 75 mb ?
HoScHaKaL said:
Thank you great work blefish @Blefish zip seems corrupted really size is 75 mb ?
Click to expand...
Click to collapse
Oh indeed it is. Let me reupload
Hello there. Its so nice to see lollipop coming to this device, first than my new moto g. I have appreciated all of your work in the past, but now that my phone died i bought a motorola. Best regards from a ubber fan of your work. Happy new year Blefish
Sent from my XT1068 using XDA Free mobile app
Reuploaded. Should be good now.
If you have any issues please let me know.
Great work! Waiting for U8860!
Happy new year!
前排～感谢^ω^
thank you!!!
thank you!!!! I'm downloading now.
I'm glad hear yor still working for u8800
Bugs (in the latest version)
* Atmel TS may not recognize finger release at all times (need to be confirmed).
* Sometimes Wi-Fi has high power usage (need to be confirmed).
* Synaptics TS sometimes fails to return from suspend (reboot to fix as a workaround).
will these bugs be fixed in the coming cm12 ？
johnnysancs said:
Bugs (in the latest version)
* Atmel TS may not recognize finger release at all times (need to be confirmed).
* Sometimes Wi-Fi has high power usage (need to be confirmed).
* Synaptics TS sometimes fails to return from suspend (reboot to fix as a workaround).
will these bugs be fixed in the coming cm12 ？
Click to expand...
Click to collapse
Check the first post. I can possibly do a workaround for Wi-Fi to make it reload itself if the crash happens.
I do not believe it. You are crazy man Thank you so much for the effort you give. You are number one.
Blefish said:
Check the first post. I can possibly do a workaround for Wi-Fi to make it reload itself if the crash happens.
Click to expand...
Click to collapse
I have just install the new cm12，it feels good！?
johnnysancs said:
I have just install the new cm12，it feels good！?
Click to expand...
Click to collapse
but the new recovery can't install 4.4 ...I have to use the old recovery to back to 4.4
Blefish said:
Requirements
404020 baseband installed (this is normally installed when upgrading to 2.3)
LVM installed
SELinux enabled recovery (TWRP recommended)
Installation
Download the latest version below
Save the ZIP to SD card & reboot to recovery
If coming from a different ROM, do factory reset
Install the ZIP
Optional: Install Google Apps
Reboot (first boot takes quite some time since ART is default now)
Bugs (in the latest version)
Sometimes Wi-Fi firmware crashes, causing high battery drain.
HuaweiSettings app is not finished, BT and magnetic sensor options do not work.
720P video recording is corruped (green recording). Some other camera apps do not have this problem.
When turning Wi-Fi tethering off, phone hard reboots.
TV out is not implemented.
Downloads
cm-12-20141231-UNOFFICIAL-Blefish-u8800.zip
Changelog
Code:
31.12.2014 (These changes have been made upon the latest cm-11.0 version)
Updated codebase to cm-12.0
Wi-Fi: Added preallocation support, Wi-Fi driver is no longer aggressively allocating its memory
Wi-Fi: Updated code from prima wlan
Minor charger changes
Added support to disable charging when connected to USB for example
ext4 library fixes
Added support for f2fs in kernel side
zram updates
Increased SF heap a couple of MB
Make HWProps return invalid value on zero MAC cases. This should fix MAC address as 0 on those devices (using default MAC)
Many other smaller kernel side fixes
Removed custom RIL class, replaced everything in custom RIL library
Added r_submix and usb audio libraries (not effective currently, not tested)
Click to expand...
Click to collapse
hi,...
blefish ausome work....Happy new year...
i tried the rom but i am getting error while installing....
i have uploaded the error file...if u can check it pls....
johnnysancs said:
but the new recovery can't install 4.4 ...I have to use the old recovery to back to 4.4
Click to expand...
Click to collapse
Yes, that's how it currently is. I can possibly make it support standard partition table too (without LVM), so maybe soon you don't have to install it.
crackandroid said:
hi,...
blefish ausome work....Happy new year...
i tried the rom but i am getting error while installing....
i have uploaded the error file...if u can check it pls....
Click to expand...
Click to collapse
Make sure you installed LVM previously.
thanks..blefish ............
i installed LVM and then rom...successful.
the rom is ausome. will test and give the details..
Thank you for your hard work.
But how can I make a screenshot? And Theme engine is gone in CM12?
season 8 said:
Thank you for your hard work.
But how can I make a screenshot? And Theme engine is gone in CM12?
Click to expand...
Click to collapse
Volume down + power should do it.
CM12 is still in early development, so much of the cm features are missing. Performance menu was added only a couple days ago.
Thanks for your excelent work.
The only drawback from CM 11.0 is the lack of Xposed Framwork (its very usefull to grenify apps and still get notifications)
Keep the good work blefish
Has anyone installed the Nougat update for the Asus Zenpad 10 Z300M?
Yes I do, what do you need to know?
I didn't know there was an update to Android 7 - I'm still hoping (probably in vain) for this tablet to be rooted.
fabfor said:
Yes I do, what do you need to know?
Click to expand...
Click to collapse
I was just wondering if there were any noticeable changes or any issues with it as of yet.
Thanks for the reply.
Is the update OTA or from a website?
odyseus said:
Is the update OTA or from a website?
Click to expand...
Click to collapse
OTA
---------- Post added at 14:19 ---------- Previous post was at 14:13 ----------
PeteSeiler2010 said:
I was just wondering if there were any noticeable changes or any issues with it as of yet.
Thanks for the reply.
Click to expand...
Click to collapse
Changes are those in the changelog. I haven't noticed any issues so far but multi user support isnt't there and I was hoping yes.
ASUS ZenPad 10 Android Nougat Changelog:
Update Google security patch
Remove redundant app shortcuts “Audio Wizard” “Splendid” “System update” and “Flashlight” from all apps menu
Remove ”PC Suite” (CD ROM)
Remove “Tap and hold to show menu” form Settings > ASUS customized settings > Touch key setting. Add “Tap and hold to activate Multi-window ” in Touch key setting
Quick Settings supports multiple pages , user can swipe left to right to see more quick settings if using more than 12. User can enter edit screen by tap the edit button on top right corner to determine which settings enabling or disabling
Default Tap and hold Recent apps key to activate Multi-window
Add “Game Genie”
ZenUI Keyboard added New Unicode code 9.0 emoji and skin tone.
The preloaded Holo Spiral, Bubbles, Black Hole, and Phase Beam live wallpapers are not compatible with Android N and will be removed after system update
Add bundled notifications switch. (Settings > Notification > Configure notifications.) When multiple notifications for a single app are received, they can be bundled together into a single group. This group can be expanded to see the individual messages
Add Lock screen wallpaper slideshow
Change wallpaper every time you wake up your device. And users can go to “Settings” -> “Lock screen” -> “Wallpaper slideshow settings” for setting
Update SMMI tool to SMMI_TEST_V5.1.74_CSC_L1L2
Support Unlock tool
Click to expand...
Click to collapse
Must be US update then as still running Android 6.x here in the UK
Odd .. haven't gotten it .. and I check every couple of days ..
It could be me, but it seems like my battery dies faster after having the update for a few days.
odyseus said:
Must be US update then as still running Android 6.x here in the UK
Click to expand...
Click to collapse
No, it's worldwide.
The official website have the link of the update, and you can apply it manually.
http://dlcdnet.asus.com/pub/ASUS/Ee...62.438207375.1494693050-1331990512.1494693046
Hello, pls can anybody help? I bough z300m from second hand, turn on it (not try log in to google) and on startup screen (language select) system ask me for update to nougat, i click OK, system updated, tablet restarted and i cant log into tablet (FRP).
I search for bypass z300m on nougat, but cant find it.
This procedure dont work for me (android 7.0)
So i need flash from fastboot, but i cant find flashtool for z300m (p00c), firmware i downloaded from official page.
Any solutions?
Thanks.
Edit. I cant turn on usb debugging in developer settings (system want log in for view all options in developer settings...)
Nougat
PeteSeiler2010 said:
Has anyone installed the Nougat update for the Asus Zenpad 10 Z300M?
Click to expand...
Click to collapse
I did the nougat OTA update yesterday,it took a few minutes to download,but it is working great !
macikcz said:
Hello, pls can anybody help? I bough z300m from second hand, turn on it (not try log in to google) and on startup screen (language select) system ask me for update to nougat, i click OK, system updated, tablet restarted and i cant log into tablet (FRP).
I search for bypass z300m on nougat, but cant find it.
This procedure dont work for me (android 7.0)
So i need flash from fastboot, but i cant find flashtool for z300m (p00c), firmware i downloaded from official page.
Any solutions?
Thanks.
Edit. I cant turn on usb debugging in developer settings (system want log in for view all options in developer settings...)
Click to expand...
Click to collapse
Bad news I'm afraid. You need the original login details used to setup the device when it was originally purchased other than that it's a long winded battle with ASUS to prove you didn't steal the device.
Good luck
After update the system reboots all the time when WiFi is ON.
If I turn OFF wifi - it works fine. No other solution...
root / multi-user
fabfor said:
OTA
---------- Post added at 14:19 ---------- Previous post was at 14:13 ----------
Changes are those in the changelog. I haven't noticed any issues so far but multi user support isnt't there and I was hoping yes.
Click to expand...
Click to collapse
There is a thread right after this listing when search for Z300M on XDA that claims TWRP and asus bootloader unlock tool (not necessary 2 get twrp) and was the reason I purchased this tablet. So far errors in everything in the OP with no responses and I hate to be paranoid but once I know, if not twice I have actuall run into "FAKE" threads on XDA in the 2-3 years being on here claiming root/twrp for a device with a small amount of chit chat, responses.... that was pure BS!
Anyhow, if you ever get root here is the fix for your multi-user issue, with es file explorer, or root explorer and editing the boot. file:
Enable Multi Window and Multi User Modes
If you have a rooted Marshmallow ROM (or Nougat), you can enable the 2 features above by editing the build.prop file found in /system/
For multi-window mode, change this entry in build.prop
ro.build.type=user
to -
ro.build.type=userdebug
To enable multi-user mode, add these 2 lines to the build.prop (anywhere, it doesn't matter)
fw.max_users=3
fw.show_multiuserui=1
Once you've made these changes, reboot the tablet.
To use multi-window mode, go to Settings, Developer options, and there will be a new menu item to switch this on or off.
To use multi-user, there will be a new option under Settings called Users.
If anyone seeing this has accomplished root on the Z300M 16GB wi-fi tablet, please let me know.....
thanks,
zach
ps of course, make sure you make a copy of the boot file to ext sd card or somewhere b4 just in case.... in the 15 times I have used this on 6.0, 7.0 lenovo & LG devices & 1 HTC... never had an issue BUT...
---------- Post added at 05:26 PM ---------- Previous post was at 05:19 PM ----------
odyseus said:
Must be US update then as still running Android 6.x here in the UK
Click to expand...
Click to collapse
Actually all of the updates for the Z300M taking it to 7.0 are for the WW SKU (world wide) tablets, as well one for Japan and 1 other.........
any sign of root?
Asking around since purchasing this tablet due to thread on here claiming twrp but its falling on its face and no response as of yet.....
zach
?????
coolbeans2016 said:
Anyhow, if you ever get root here is the fix for your multi-user issue, with es file explorer, or root explorer and editing the boot. file:
Click to expand...
Click to collapse
Thank you coolbeans2016, that's right the reason I am too desperately looking for a way to root: to apply that fix.
Btw, I really do not see the reason for Asus to disable a native function (multi-user) that is - to me - obvious for a tablet. (Maybe it eats resources? i.e. storage space)
problem is
fabfor said:
Thank you coolbeans2016, that's right the reason I am too desperately looking for a way to root: to apply that fix.
Btw, I really do not see the reason for Asus to disable a native function (multi-user) that is - to me - obvious for a tablet. (Maybe it eats resources? i.e. storage space)
Click to expand...
Click to collapse
Problem is the instructions for getting TWRP flashed or even just booted up on TWRP threaded for installation of SuperSU or Magisk is failing. I've been told I'm wrong and am just not reading or following the instructions correctly but on a VERY popular device there is NO ONE claiming $$PROFIT$$ on the thread! Even the ones claiming understanding of the thread are having complications but only have an average of 6 posts as jr users with no thanks feedback.... yet they have no questions regarding using the SP Flash Tool?!!!!! Strange to me!
I'm contacting the dev on the thread AGAIN to see if I can get a detailed set of instructions in JUST getting TWRP onto this tablet, or its useless to me......
He really thought I was calling his thread a false listing but straightened it out with him about the fact he references another such thread along the same lines for the Verizon Asus A380M, which EVERYONE knows has never been, probably never will be able to get a custome recovery, let alone root of any kind!!!!!!!!
Any info you come across, or if you have tried the thread I'm mentioning please let me know your errors encountered, any ideas how WE may be not taking the instructions correctly.
zach
Hi,
I couldn'tt find any update for Z300CL.
Does anyone know if such an update is available?
Could you post the link here?
Thanks a lot
I used usb ethernet dongle on android 6 and it worked , it showed ethernet icon instead wifi. But when on android 7 the dongle does not work, seems usb host function is disabled, I dont want to root my tabled is there any way to enable usb host support ?
Hello,
I bought a Junsun V1 pro with UI 3.0 Interface and 8GB Ram + 128GB Flash Storage. It works quite well for me. However the Touch scrren calibration was a bit offset. So i searched the internet and found out, that it is possible to calibrate the touch screen after pressing the display with five fingers for some seconds. The screen calibrations also worked well but after this i relised, that my touch (or front) buttons don't work any more. I tried to reattach them to functions using the Touch Study menue in the factory settings menue (8878) but nothing happens there when i press the button (which was possible before). Does anyohne know this issue or has an idea how to solve this?
During the screen calibration you have to choose the resoloution and the direction of the first touch point to click. No possibility or options for the touch buttons.
Do you need any more information or pictures of the device?
Kind regards
I think I have a clue whats going on. When i play around with the settings Touch Origin X and Touch Origin Y I can get the display edge to work in touch study. However, i don't really get the left side to work. Could anyone take me some pictures of the factory settings menu "other". I think comparing the settings could help me out.
Kind regards
twinking said:
Hello,
I bought a Junsun V1 pro with UI 3.0 Interface and 8GB Ram + 128GB Flash Storage. It works quite well for me. However the Touch scrren calibration was a bit offset. So i searched the internet and found out, that it is possible to calibrate the touch screen after pressing the display with five fingers for some seconds. The screen calibrations also worked well but after this i relised, that my touch (or front) buttons don't work any more. I tried to reattach them to functions using the Touch Study menue in the factory settings menue (8878) but nothing happens there when i press the button (which was possible before). Does anyohne know this issue or has an idea how to solve this?
During the screen calibration you have to choose the resoloution and the direction of the first touch point to click. No possibility or options for the touch buttons.
Do you need any more information or pictures of the device?
Kind regards
Click to expand...
Click to collapse
Hello, were you able to fix your problem?
Exorzist666 said:
Hello, were you able to fix your problem?
Click to expand...
Click to collapse
Hi,
yes I was able to fix it with a backup of the factory settings menu. I got it here in the forum:
Post in thread '[Firmware] Junsun V1 8667Q - 8G/128G VHD QLED' https://forum.xda-developers.com/t/firmware-junsun-v1-8667q-8g-128g-vhd-qled.4405475/post-87647423
This is for HUs with 8667Q. I'm not sure if it will work for others. First make a backup of your current settings. You need an usb Stick with FAT32. Than download the backup and Import it to you HU:
1.Enter the factory Settings with code 8878.
2. Plug in the empty USB Stick to the 6pin port
3. Go to "MP Mode" and click the right Button (settings to usb)
4. Disconnect the usb Stick an save the Backup file to your PC (it is a *.bin in the root of the usb Stick)
5. Empty the usb Stick and copy the Backup file from the link above to it (you have to unpack it first). So dont copy the *.rar but the *.bin in it.
6. At your HU Enter the factory settings menu with Code 8878 and go to Menu "others"
7. Insert the usb Stick to 6pin Port. Click Import at the right top
8. I think your device will restart. Touch buttons should work again (if the issue was like mine). Unfortunately the Backup is polish. So May you should habe a Look how to change language before you Import it.
Do all of this on your own risk! I'm not sure if it will work or even crash your device.
twinking said:
Hi,
yes I was able to fix it with a backup of the factory settings menu. I got it here in the forum:
Post in thread '[Firmware] Junsun V1 8667Q - 8G/128G VHD QLED' https://forum.xda-developers.com/t/firmware-junsun-v1-8667q-8g-128g-vhd-qled.4405475/post-87647423
This is for HUs with 8667Q. I'm not sure if it will work for others. First make a backup of your current settings. You need an usb Stick with FAT32. Than download the backup and Import it to you HU:
1.Enter the factory Settings with code 8878.
2. Plug in the empty USB Stick to the 6pin port
3. Go to "MP Mode" and click the right Button (settings to usb)
4. Disconnect the usb Stick an save the Backup file to your PC (it is a *.bin in the root of the usb Stick)
5. Empty the usb Stick and copy the Backup file from the link above to it (you have to unpack it first). So dont copy the *.rar but the *.bin in it.
6. At your HU Enter the factory settings menu with Code 8878 and go to Menu "others"
7. Insert the usb Stick to 6pin Port. Click Import at the right top
8. I think your device will restart. Touch buttons should work again (if the issue was like mine). Unfortunately the Backup is polish. So May you should habe a Look how to change language before you Import it.
Do all of this on your own risk! I'm not sure if it will work or even crash your device.
Click to expand...
Click to collapse
very good. I have the same problem. Thank you very much. I will try the update.
Exorzist666 said:
very good. I have the same problem. Thank you very much. I will try the update.
Click to expand...
Click to collapse
Did it solve the problem for you?