Database Users

One more brick to the Cathedral

This is my first Thread and unfortunately for the worst reason, that’s right … my WISA200 (Qtek 9100) is officially a brick.
For one week now that I’m surfing this forum looking for a solution. No success.
Long story short….
I’ve “see the light” with XDA and got so addict that I’ve started to make all the ROM’s I could get my hands on…last I got RUU_Molski.Biz_226102_22610105_022511_WWE-30MB (G3 Device. IPL/SPL like: 2.xx) and I was a very happy person, thanks to Molski.
The problem was that my enthusiasm did not stop and I made the big mistake …my own ROM.
My idea was quite simple, use the 3.0 Molski Rom thaking out the extended and that’s it, clean OS … I’ve tried sereval times and versions without any problem until one week ago...
I got the boot screen and never got read of it. The strange thing is that when previously the IPL and SPL were 2.26, now is IPL 2.26 and the SPL 2.18.0001.
I’ve already tried everything, without success …..
Downgrade:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Old Molski great job (how I miss it):
and even MiniSD image:
Nothing works …..
I’ve Google search (it always goes back here) and nothing……
Has any one got this boot screen before?
Thanks in advance even for those who just will read my post and … why not …laugh on me ….brick nerd….
Obrigado,
The Nerd

If it's getting as far as the boot screen, you should still be able to get into the bootloader (see wiki) and try a flash that way.

Looking for help .....
Alan, thank you for your care and time reading my post.
Unfortunatelly I've spent my day using the different bootloaders tools and solutions and nothing works .... or I'm making the wrong procedure. I've even created (I think) a MiniSD SPL upgrade, but it did not work.
It seams the phone stops responding when I try to make any think.
MTTY without error, seams not to do anything although it connects to the phone ...
If anyone else has any ideas I would apriciate a lot.
Once more thanks Alan.

HAPPY
I did not stop trying even though the bootloader did not work properlly, so still I insisted on inserting a rom, and I've tryed this one:
Qtek_9100_Telia_Danish_2.18.7.9245
Now it is on 98% I am really happy.
I'll keep you guys posted.
Nerd!

now that u got that far.... go as alan points out to this thread with unlock advice and follow the procedure to get a good bootloader unlocked and all

the process went all the way to the end but it came back again to the bootscreen rgb screen without any change still the IPL is 2.26 and the SPL 2.18.0001, does this mean my wizard is G4 and all the problems come from there? .....
I've made the format procedure, but still gives me FAT error.
Also I made a huge digging in the wiki and all posts to get in to the bootloader to change it or correct the SPL nothing has worked for me. Does any one has a SD image (any langue dont care!) which might solve me the problem?
Thanks a million.
Nerd ....
I promisse if I solve this I will never make a rom again!!!!

Problem solved!!!!
The issue was a new motherboard ... yes... hardware failure.
As anyone expirenced similar issues?
Thanks to all support.

When you tried to flash to molski's rom it gave you an error 300 message. This message is usually displayed on a G4 device (you're SPL is a G4 SPL now). I think it could be flashed to you're device if you replace the "ROMUpdateUtility_Wizard_NoID.exe" with the one that works on G3 and G4 devices from this thread:
http://forum.xda-developers.com/showthread.php?t=291215
If this doesn't work, try flashing the wizard_love rom. It seems to flash to almost every device out there.
Good luck!

Any genius to help me out pls

hay guys pls help me out
i am having LEO asia version
yeterday i flashed it with (biggest mistake of my life)
RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2. 10.50.26_Signed_LEO_Ship
using sd card(another big blunder)
its orignal rom was
RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
now it is stuck on this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i tried hspl2 gives this
i tried hspl it gives me this
hspl1024
http://i39.tinypic.com/21cyp9i.jpg
when trying to format with official rom
just shows loading....... and hangs out
pls somebody help out i bough this phone collecting my 6 months salary

common guys any body there

Should have read the stickies bro....
Anyways, try flashing an older stock version from SD...but I think you are stuck because now phone has new SPL 2.10 on it and no HSPL out there for it yet.
You could however try flashing the new stock ROM from PC instead of SD and it should atleast give you a working phone

there is no spl for 2.10 yet... not sure you can flash a stock ROM vis PC to get it working. try flashing your stock ROM via SD.

pongster's
i tried flashing stock rom via sd also stuck on loading..........

rahul_sharma1982 said:
pongster's
i tried flashing stock rom via sd also stuck on loading..........
Click to expand...
Click to collapse
that means only one thing... I'm afraid you'll need to wait for HSPL3 or something to get HSPL for 2.10.
Bepe and Cotulla and their team are the geniuses that will be able to help you out.
you're phone still has hope... you'll have to wait though... there were those who flashed the 2.10 shipped ROM before Hspl2 came out and were stuck as well. A new Hspl for 2.10 Spl looks like your only chance.
Hopefully, I'm wrong...

Sorry to hear that Bro..
Your Leo stucked on SPL 2.10 while the most currrent HSPL is HSPL 2.08.
What I understand, original SPL can be upgraded but not downgraded.
I suggest you to bring it to HTC service center. They will definitely know that the warranty is void, but you still can ask them to repair it but you will be charged for that (but its better to try it unless the cost is more than the price of your Leo)

Flash the 2.13 rom again.
Apart from gold card its the only thing you can do until a 2.10 hardspl is released.

Reflash 2.13 with Goldcard is ur only solution.
Probably you have to change the first 2 digit from 00 to 11 in ur goldcard.
It's funny, there shipping LEO 1.5 PB81120 in whole of Asia.

hello xmoo
u suggested for gold card but i searched in this forum and found gold cards are no longer available. if u know the method pl tell me thanks

rahul_sharma1982 said:
hello xmoo
u suggested for gold card but i searched in this forum and found gold cards are no longer available. if u know the method pl tell me thanks
Click to expand...
Click to collapse
PM ur SD-Card serial nr and i'll fix you a correct goldcard!

pkoper
i tried to flash 2.13 again but error is coming .

That is sad....
Reflashing your leo 2.13 is the only option left i think.. give it a try.. or wait for the newer version of hspl.. current version of hspl2 support till only 2.08 and by flashing via sd card u have upgraded your hspl to 2.10 ..
Wait or try 2.13.. that is all you can do for now.. rest ask Bepe and cotulla for the help.. if they can do anything for you..

xmoo
thanx xmoo i will post my sd card serial nr tonight as i am in office u r my last hope man

how about flashing the 2.10
Code:
tmous rom from sd card? yes it will fail, but will it not flash the spl 2.08 before it fails?
just a thought.

samsamuel's
no i tried that also its going to 1% and phone restarts

only solutions i know about for this are the following:
1: turn your phone off, put it in the microwave for 2-3 seconds, this will destroy all data held on all chips in the HD2, essentially causing a complete failure, then return it, when they ask what happened tell them this:
I was sending an sms, the screen went all static and the device locked up, so i pulled the batter and tryed a soft reset, but the device didnt load and now it does this....
(this wil also stp them from being able to tell if you have tried to flash at all!!)
2: wait for new SPL
(it all depends on your insurance really)
MG

good suggestion i will go for 2nd one:

MysticGenius said:
only solutions i know about for this are the following:
1: turn your phone off, put it in the microwave for 2-3 seconds, this will destroy all data held on all chips in the HD2, essentially causing a complete failure, then return it, when they ask what happened tell them this:
I was sending an sms, the screen went all static and the device locked up, so i pulled the batter and tryed a soft reset, but the device didnt load and now it does this....
(this wil also stp them from being able to tell if you have tried to flash at all!!)
2: wait for new SPL
(it all depends on your insurance really)
MG
Click to expand...
Click to collapse
Number 1. works great for me...THX...

Hi,my phone is having the same problem.However,my SPL version is 2.08.I want to flash back to a stock rom but it just stucks at the white 'loading...' screen.Here's a picture of it.

Need help reformatting my Hd2

So over the weekend I bought the Hd2 and tried installing android. Which I did, to a certain point. However I get no sound because haret is launched before CLRCAD.EXE.
The reason for this is I installed one of the boot loader where it automatically runs those two files boots Android automatically.
Before I use to reformat the SD card via computer and the phone through WinMo but now I dont have an option to boot in WinMo at all. How can I reformat my device since I can run WinMo.
Any ideas? Thanks in advance

Take the card out and put it into your computer then format.

FriedSushi87 said:
Take the card out and put it into your computer then format.
Click to expand...
Click to collapse
I have done that, but it still boots the program and comes to a screen saying " Launch Android" or "File Explorer". I might have accidentally saved the program on the phone rather than the SD card.
It does not give me an option to boot in WinMo where I need to reformat my phone.
Is there any other way where I can reformat my phone?

try a hard reset
power off then back on while holding the volume button in (up and down)
follow on screen instructions.

try a task 29.search for it in the forums

I will try this later on and report back. Thanks for your help

Julian2103 said:
try a task 29.search for it in the forums
Click to expand...
Click to collapse
i agree but be careful and read everything
http://forum.xda-developers.com/showthread.php?t=653614

The follow recommendations did not work, is there any other way? I still have the android boot screen to show after a boot.
I reformated the SD card, the phone, and did factory reset and hard reset.

Julian2103 said:
try a task 29.search for it in the forums
Click to expand...
Click to collapse
Don't do this... warranty, try hard reset

contender1543 said:
The follow recommendations did not work, is there any other way? I still have the android boot screen to show after a boot.
I reformated the SD card, the phone, and did factory reset and hard reset.
Click to expand...
Click to collapse
Something you are doing wrong... did you install another ROM?
Are u trying make hard reset with another rom with a bootloader?
If you did try task29, wich rom you use?
Try to run a stock Rom
Pm if you need help

caedanne said:
Something you are doing wrong... did you install another ROM?
Are u trying make hard reset with another rom with a bootloader?
If you did try task29, wich rom you use?
Try to run a stock Rom
Pm if you need help
Click to expand...
Click to collapse
I used chunkyROM
and installed the 2.08HSPL and TMOUS Radio to 2.11
then after doing factory reset and reformating everything, it still boots energy rom where theres two links on the bottom "launch android" and " file explorer"

contender1543 said:
I used chunkyROM
and installed the 2.08HSPL and TMOUS Radio to 2.11
then after doing factory reset and reformating everything, it still boots energy rom where theres two links on the bottom "launch android" and " file explorer"
Click to expand...
Click to collapse
You need try this: http://www.htc.com/www/SupportDownload.aspx?p_id=297&cat=2&dl_id=856
First stock again, if you dont change to another Rom problem will appear again :S
After that, read this: http://forum.xda-developers.com/showthread.php?t=713977 carefully

caedanne said:
You need try this: http://www.htc.com/www/SupportDownload.aspx?p_id=297&cat=2&dl_id=856
First stock again, if you dont change to another Rom problem will appear again :S
After that, read this: http://forum.xda-developers.com/showthread.php?t=713977 carefully
Click to expand...
Click to collapse
I am not able to use the first link because I do have a Tmobile USA phone and the website stated its not recommended for that phone.
I will look into the second thread which I did not come across as of yet. Hopefully there might be something useful for me.
This is the information I get when I boot the screen
R: 2.12.50.02.2
G: 15.40.50.07u
D: D2 Energy
Then it takes me to the following screen after booting up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then this when I hit the menu button
perhaps you can shed some light on where I should look in the other thread.. Remember I tried flashing and doing factory reset to the phone and the SD card and nothing. I also used ChunkyRom

Use hspl2 or hspl3 since your on TMO-USA and reflash your bootloader then flash with a totally different rom.

Try to uninstall the the android bootloader from remove programs under settings/system?

iky10 said:
Use hspl2 or hspl3 since your on TMO-USA and reflash your bootloader then flash with a totally different rom.
Click to expand...
Click to collapse
Alright I use thread to flash my device
http://forum.xda-developers.com/showthread.php?t=653614
How do you flash your bootloader though? Or does that do it automatically when flashing the device.

mate, enter bootloader (phone off, then phone on while holding VOLUME DOWN key) then connect your phone through USB to the PC and re-flash a new ROM via PC.
Make sure you have HSPL installed on the phone! If not try searching for HSPL2 and install it while in bootloader. Make sure you read the instructions.
It should be OK!

chribruu said:
Try to uninstall the the android bootloader from remove programs under settings/system?
Click to expand...
Click to collapse
I couldnt find that file
where is it exactly located it? I checked settings/system and check individual folders on the device and sd card under file explorer..

caedanne said:
Don't do this... warranty, try hard reset
Click to expand...
Click to collapse
Task 29 wont hurt your warranty... If all else fails I would Task 29 and just re flash a ROM. Read up a bit before installing Android again OP so that you know what to do in situations like this and dont get stuck with a dead phone

De-brand - maybe a mistake.....no more OTA :(

Hi all,
A little while ago, after realising I'd received a Vodafone branded DHD I decided to de-brand it to remove all the bloat but also under the impression that would mean I'd get OTA updates from HTC as opposed to Vodafone, thus get them quicker.
Ironically Vodafone UK sent out 2.3 a few weeks before HTC and so I was a bit miffed, but then even more miffed to find out that I couldn't receive OTA updates any more at all after the de-brand, thus leaving me stuck on 2.2.1 with a buggy 1.72 stock HTC ROM.
So, my question is how do I get this phone to be able to retrieve OTA updates again? I've learnt my lesson not to meddle and would ideally like to go back to a Vodafone ROM (which matches my serial number) to get 2.3 and future OTA updates. Is this possible? Failing that can I get my phone to think it actually has a HTC serial thus get an OTA from them?
Any advice would be appreciated.
Thanks,
Chris.

did you debranded properly I mean put a stock cid which is HTC_001
The way you should debrand is run exe 1.32 do a temproot then open radio s-off app make radio s-off and stock cid and you'll receive an update

Well you are in luck.
I reverted my phone back to stock in preparation to exchange for a new working Desire HD. While on 1.32 I got the OTA file and I'm currently uploading the OTA file to my site.
As long as your on x.xx.405.x this OTA will upgrade you to Gingerbread.
The file should be uploaded soon.

Hi guys,
Thanks for the quick response and for helping me out. I appreciate I'm a noob and don't want to brick my phone so will ask for help from experienced folk.
I'm not quite sure how the de-brand was done - I obtained a de-brand pack from Fonefunshop and used that (I'm lazy and also was struggling to find exact details on how to do it manually - lots of talk about s-off etc )
It involved booting with a special SD card they supplied and it applied a stock HTC ROM taking it to 1.72. Annoyingly this was far less reliable than the 1.32 Vodafone ROM I had as standard and resulted in random reboots etc. Explains why HTC pulled it.
Anyway, I now have my DHD on HTC stock 1.72 with a Vodafone serial handset.
Do I need to create a Goldcard to do any of this? Been looking into how I do that.
I tried applying an RUU file for 2.3 (stock HTC WWE) but it complained about not being the right one for my phone which I think is because of the serial number being a Voda one. I think.

If you check your software version.
Settings > About Phone > Software Information
What does it read?

Hi Andy,
I'm on 1.72.405.3. Tried editing my post to show that but there's a 5 minute gap thing in place so it wouldn't let me.
Cheers,
Chris.

Because your on 405, thats the WWE (World Wide English) version, you can update to any build aslong as its a 405 also.
The OTA has been uploaded. Find that HERE. Download and place on your SDcard and reboot into bootloader, from there enter recovery. It should flash the update.

My god, you are a complete star mate - thankyou ever so much.
Just one quick Q. How do I get into boot loader? Is it power off, yank battery, then hold volume down and power button? Just to confirm.
Also, will this break my wifi / radio? Read somewhere about that.

Yes to the bootloader. Use the volume keys to navigate and power to press enter.
No, your wifi is safe. It would only break if you flashed this from ClockworkMod Recovery, which you don't have.
No problem, I try my best to help everyone.

Excellent, will try that now.
I take it the entire contents of the zip need to go onto the root of the SD card?
Also, is the update Vodafone or unbranded? Just curious as to what exactly I'll end up running.
Thanks again,
Chris.

Don't open or unzip that file. It is signed by HTC and will fail if you do.
Just place on your SDcard.

Ok, given that a go - no joy I'm afraid.
Tried dropping the zip on the root of SD and going into bootloader and recovery. Got a red triangle, so after a bit of searching managed to figure out that you then need to press volume up and power to get to the next step. Then tried to apply sdcard:update.zip and it came up with an invalid operation error.
So I renamed the file to update.zip and tried again - same problem.
The screen with the error reads:
E:\Can't open /cache/recovery/command
Then I try to apply the update.zip and I get the invalid operation message and it reboots my phone.
Do I need to turn S-OFF for this to work or do something funky with the .zip file?

I'm getting the same thing too. Not sure what to do with the OTA file. Try renaming to
"OTA_Ace_Gingerbread_S_HTC_WWE_2_36_405_8_R-1_32_405_6_release_187434em4h8vxqx0xssxyf.zip" and place in /download. Then run the update check from within settings

Nope, just tried that too - no joy.
How did you revert back to stock for warranty? Might as well look at doing that instead and going back to a Voda ROM. At least it'll all work again.
Failing that is it possible to get OTA to work once debranded? Can I change the Serial?

If the OTA doesn't work. Download the Gingerbread RUU from HERE. And run from your computer. It will update you to Gingerbread from there.

Thanks Andy.
I think I've already tried the RUU before and it got so far then complained about not being the right one for my phone - wonder if it's a serial no check (HTC have said to me it's a Voda serial, not one of theirs). Perhaps that stops you putting HTC ROM's on phones listed in a database as being branded?
Got a copy of the Voda 1.32 one whilst I was on your site thanks. If the HTC 2.3 one doesn't work how could I revert to the stock 1.32 Voda ROM? That would get me back on track after teaching me not to meddle.
I can live with the bloatware but not without the OTA's.

Thought so - tried the RUU and it errors when it gets to the updating signature part:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think reverting to stock Voda might be the only way. Or perhaps trying s-off and then the RUU? I'm guessing here.
EDIT - I've also looked for the Vodafone branded 2.3 RUU but can't find it. Perhaps that is the way to go?

Have you tried downgrading to 1.32.405.6, then applying the Gingerbread RUU?
I had to do that yesterday to return my phone for an exchange.

Ok, I've been thinking, and searching.
I'm thinking I need a Goldcard for this then I can re-apply the stock Voda RUU 1.32 that I now have. Then the phone is fully back to normal and OTA's will work as they should. The lack of Goldcard seems to be what's causing the RUU to fail.....I think.
How does that sound?

Does you handset currently have any Vodafone bloatware, or Vodafone boot/splash screens?
To downgrade from a Vodafone branded handset you will need a goldcard.

[HELP] Stuck at HTC boot screen (kinda)

First there are so many sub-forums on the HD2 page i couldn't chooce so i put it here.
Like this thread http://forum.xda-developers.com/showthread.php?t=982921&nocache=1
I've been having this problem of being unable to start magdlr mode or cLK mode. installed both right neither worked, did wipes,partitioning
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i start phone it's stuck at the boot HTC screen i wait for hours nothing happens.
the only thing i can open is the tricolour screen right now. i have no idea what to do now i was trying to get from Windows 6.5 to android
I have already done this right one another HD2 from 6.5 to anroid 2.3.7 and i had no problems, did same thing but it didn't work with this one.

Man, you're definitely have a lot of homework and (obviously) we need more info..
I'm sorry if I misunderstood something, but in general, here's what you'll need:
First, for custom ROMs whatever it is (winmo, wp, android) you're definitely need a HSPL (2.08HSPL for wp & android, or 3.03HSPL for winmo).
Second, a Radio ROM that support 576MB RAM.
Third, a loader (magldr for wp7 or android, or CLK for android only).
Fourth, a highly compatible & high speed uSD.
Fifth, a flashable recovery image (if you plan to use android).
Sixth, a flashable OS ROM image of your choice.
If your phone stuck at boot screen image (white background with a green HTC word if it's still stock boot screen), then it's definitely your NAND is empty.
No loader, no ROM image, nothing.
Read some sticky thread to dig up a lot more info.

Shadow_Nexus said:
Man, you're definitely have a lot of homework and (obviously) we need more info..
I'm sorry if I misunderstood something, but in general, here's what you'll need:
First, for custom ROMs whatever it is (winmo, wp, android) you're definitely need a HSPL (2.08HSPL for wp & android, or 3.03HSPL for winmo).
Second, a Radio ROM that support 576MB RAM.
Third, a loader (magldr for wp7 or android, or CLK for android only).
Fourth, a highly compatible & high speed uSD.
Fifth, a flashable recovery image (if you plan to use android).
Sixth, a flashable OS ROM image of your choice.
If your phone stuck at boot screen image (white background with a green HTC word if it's still stock boot screen), then it's definitely your NAND is empty.
No loader, no ROM image, nothing.
Read some sticky thread to dig up a lot more info.
Click to expand...
Click to collapse
As i said i have done this before. many times on different android devices so i know the basics i need.
I got the ROM i'm planning to put and 2.08HSPL is on the phone.
Not sure what i need the Radio ROM is for
I tried putting magldr didn't work, neither did CLK... they were put on succesfully but then i couldn't load them due to the fact there's no current ROM on the phone
SD Card is there. It's a good one
Got the recovery image

Still need help.

Probably the partition is to small and can't load, flash again and make bigger partition.

eclyptos said:
Probably the partition is to small and can't load, flash again and make bigger partition.
Click to expand...
Click to collapse
Flash what again? i never got to putting the ROM itself. It always said empty Image version.

Smileyz0r said:
Flash what again? i never got to putting the ROM itself. It always said empty Image version.
Click to expand...
Click to collapse
Did you flashed? You did not because it not say anything? Well, to me happened many time. If you have the right image in the folder should not be any problem. Just flash. If you still stuck in boot it's because the partition is small or you using a wrong image.

eclyptos said:
Did you flashed? You did not because it not say anything? Well, to me happened many time. If you have the right image in the folder should not be any problem. Just flash. If you still stuck in boot it's because the partition is small or you using a wrong image.
Click to expand...
Click to collapse
When i flashed nothing happend. I'm at the point where i don't know if it's even fixable. it's not bricked tho