Database Users

One more brick to the Cathedral

This is my first Thread and unfortunately for the worst reason, that’s right … my WISA200 (Qtek 9100) is officially a brick.
For one week now that I’m surfing this forum looking for a solution. No success.
Long story short….
I’ve “see the light” with XDA and got so addict that I’ve started to make all the ROM’s I could get my hands on…last I got RUU_Molski.Biz_226102_22610105_022511_WWE-30MB (G3 Device. IPL/SPL like: 2.xx) and I was a very happy person, thanks to Molski.
The problem was that my enthusiasm did not stop and I made the big mistake …my own ROM.
My idea was quite simple, use the 3.0 Molski Rom thaking out the extended and that’s it, clean OS … I’ve tried sereval times and versions without any problem until one week ago...
I got the boot screen and never got read of it. The strange thing is that when previously the IPL and SPL were 2.26, now is IPL 2.26 and the SPL 2.18.0001.
I’ve already tried everything, without success …..
Downgrade:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Old Molski great job (how I miss it):
and even MiniSD image:
Nothing works …..
I’ve Google search (it always goes back here) and nothing……
Has any one got this boot screen before?
Thanks in advance even for those who just will read my post and … why not …laugh on me ….brick nerd….
Obrigado,
The Nerd

If it's getting as far as the boot screen, you should still be able to get into the bootloader (see wiki) and try a flash that way.

Looking for help .....
Alan, thank you for your care and time reading my post.
Unfortunatelly I've spent my day using the different bootloaders tools and solutions and nothing works .... or I'm making the wrong procedure. I've even created (I think) a MiniSD SPL upgrade, but it did not work.
It seams the phone stops responding when I try to make any think.
MTTY without error, seams not to do anything although it connects to the phone ...
If anyone else has any ideas I would apriciate a lot.
Once more thanks Alan.

HAPPY
I did not stop trying even though the bootloader did not work properlly, so still I insisted on inserting a rom, and I've tryed this one:
Qtek_9100_Telia_Danish_2.18.7.9245
Now it is on 98% I am really happy.
I'll keep you guys posted.
Nerd!

now that u got that far.... go as alan points out to this thread with unlock advice and follow the procedure to get a good bootloader unlocked and all

the process went all the way to the end but it came back again to the bootscreen rgb screen without any change still the IPL is 2.26 and the SPL 2.18.0001, does this mean my wizard is G4 and all the problems come from there? .....
I've made the format procedure, but still gives me FAT error.
Also I made a huge digging in the wiki and all posts to get in to the bootloader to change it or correct the SPL nothing has worked for me. Does any one has a SD image (any langue dont care!) which might solve me the problem?
Thanks a million.
Nerd ....
I promisse if I solve this I will never make a rom again!!!!

Problem solved!!!!
The issue was a new motherboard ... yes... hardware failure.
As anyone expirenced similar issues?
Thanks to all support.

When you tried to flash to molski's rom it gave you an error 300 message. This message is usually displayed on a G4 device (you're SPL is a G4 SPL now). I think it could be flashed to you're device if you replace the "ROMUpdateUtility_Wizard_NoID.exe" with the one that works on G3 and G4 devices from this thread:
http://forum.xda-developers.com/showthread.php?t=291215
If this doesn't work, try flashing the wizard_love rom. It seems to flash to almost every device out there.
Good luck!

I need the original Vodafone splash image

Hello,
In order to take it to repair (again) for the G sensor problem I need to put back the original Vodafone splash screen.
Can someone upload it somewhere?
Also I have an engineered spl (had the perfect one). Should I change it too? Or the guys from the repair won't notice that?
Thanks

you should change the spl to a standard one really as they will tell straight away. Do you know what your orignal one was?
Cant find the original splash screen but heres a similar one i have made
The image looks pants in preview but is perfect once splashed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks for the image.
I had the 1.33.0010 one. Now it's the same but engineered with S-OFF.
Where can I find the original one?
I had a nandroid backup of my original rom after changing the SPL. Now i'm running the original software, but with wrong spl. It will be enough just to apply the the perfect SPL before going to repairs?

I woudnt like to say really, i have had mine repaired it had the spl for g1/dream n it (bricked) i didnt get charged for the repair
This thread has shipment spl Thanks to AMON_RA

I had mine repaired too, ut it was bricked...so it was impossible to say that i had another rom/spl. But now the scenario is different...the phone is up and running. Only the G sensor isn't working

you tried doing a factory reset?

And not just once...
In Teeter game the ball is going in the upper right corner and is staying there no matter what.

Have you tried amon ra recovery 1.2.3?has a fix rotate option in the recovery,you don't have to flash it only boot.
Could you tell me all The about phone info like kernel etc for the original voda rom? Would be a great help to me.

Just tried the repair from the recovery...no luck with it.
Also i jst figured that I don't have the original ROM anymore....I will try to take it from someone else. And after that....repairing center
Another thing....how can I put back the original perfect SPL (1.33.0010)?

I made a nandroid backup of the South African Magic ROM when I first got the phone. If someone can tell me how to upload it, I will.
In return, if someone can help me root the phone, that would be greatly appreciated. I've got the recovery flasher loaded, and it seems to work, but any attempt to load a custom ROM just ends up in a hang and I need to revert.
I don't think most ROMs are compatible with whatever customised software we use here. It may have something to do with the radio version. DON'T FLASH A RADIO UPGRADE! I learnt that the hard way.
Regard,
H

I've managed to change the eng SPL 1.33.2010 S-OFF to 1.33.0009 S-ON and now I cannot change the splash screen anymore...
How can I keep it on the original SPL side but with the Vodafone splash image?
Thanks

flash the image BEFORE you flash the perfect spl

I couldn't find the perfect SPL...so now it's in the repair center wit 1.33.0009 S-ON spl and the original rom image in it...maybe they won't find that as it's a hardware issue for sure.

Please help...my HD2 stuck in " Stick together " screen

please help me...i up a lot of "rom ship" but my HD2 still stuck at " stick together screen" although all process of uploading rom is ok. I've used Task 29 but cant help me...
i dont know why...
here is my bootloader and my sitiuation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sometime my Leo can boot in to OS and i can capture my information about my LEO for you:
my LEO is not T-mobile..
please help me.
thank you all.

hlpdt10 said:
please help me...i up a lot of "rom ship" but my HD2 still stuck at " stick together screen" although all process of uploading rom is ok. I've used Task 29 but cant help me...
i dont know why...
here is my bootloader and my sitiuation:
my LEO is not T-mobile..
please help me.
thank you all.
Click to expand...
Click to collapse
Friend, by your images it looks like you have indeed flashed the US T-mobile ship rom (the radio at least). Is your HD2 a 1024 flash size even?
To me it looks like possible bad radio/rom & device pairing. Is it possible for you to flash a stock rom for your phone? This would be my first approach.
Good luck!

zkid2010 said:
Friend, by your images it looks like you have indeed flashed the US T-mobile ship rom (the radio at least). Is your HD2 a 1024 flash size even?
Click to expand...
Click to collapse
doesn't matter, regular leo can take tmous roms fine with hspl.

Yes, i tried asia WWE shipped rom:"HTC_Asia_1.66.707.1_Radio 2.06.51.07": before tmous shipped rom : "TMOUS_2.13.531.1_Radio 2.10.50.26"
but two shipped rom above cant help me...i still have this problem.....
after shipped rom..i 've try some custom roms but nothing better.

hlpdt10 said:
Yes, i tried asia WWE shipped rom:"HTC_Asia_1.66.707.1_Radio 2.06.51.07": before tmous shipped rom : "TMOUS_2.13.531.1_Radio 2.10.50.26"
but two shipped rom above cant help me...i still have this problem.....
after shipped rom..i 've try some custom roms but nothing better.
Click to expand...
Click to collapse
Okay but please see, the 2.06.51 and the 2.10.50 ...the 51 and 50 are completely different locale radios, as .51 is see in Europe and Asian devices, I use .50 radios and am in the US using T-mobile.
I believe that you have possibly a clash with the radio on your device is not meant for your device. Are you in Asia somewhere? I would try to flash first a radio with 2.xx.51.xx possibly, then a rom that is meant to work for that radio.
As I said from your pictures, you appear to have a radio you should not
Perhaps task29 again but in this process use a 2.xx.51.xx radio, if you can do this successfully you may be then able to get proper rom back on but you must make sure the rom you flash, if it has radio as ship roms usually do, must match your device (the 2.xx.51 most likely!!).
This is very important or you can damage phone. If you can somehow get OS to load on occasion, all hope may not be lost

Thanks for your advices...
Yes i'm in Asia
now i will retry Task 29 => up Radio v2.06.51.07
after that i will upload shipped rom:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship ( using usb cable)
i will tell you my result..

hlpdt10 said:
Thanks for your advices...
Yes i'm in Asia
now i will retry Task 29 => up Radio v2.06.51.07
after that i will upload shipped rom:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i will thell you my result..
Click to expand...
Click to collapse
Okay I see - you know the 2nd rom radio in ship rom (2.05.51.05_2) will probably overwrite your task29 radio 2.06.51.07. Ship rom will usually also flash radio.

My Hd2 is 512 flash size...
using task 29: ok
upload radio: ok
upload shipped rom: Not OK
my HD2 have the screen like this:
i 'll retry again

hlpdt10 said:
My Hd2 is 512 flash size...
using task 29: ok
upload radio: ok
upload shipped rom: Not OK
my HD2 have the screen like this:
i 'll retry again
Click to expand...
Click to collapse
to look at your recent picture, the flashing process stops using Asia rom? This may be hardware issue then
Can you just flash only the ship rom without radio flash first? or! Perhaps run task29 with the include 5mb 'empty' rom file which flashes no radio, then flash ship rom. something in the combination of task29 radio flash and rom flash (upload) is causing issue. If that doesn't work could possibly be hardware issue? My expertise is very limited as I have only flashed bad radio 2 times but could recover with ship rom flash

now i try to re flash radio of rom ship ( that i 've just axtract from RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship_2)

now i cant update the radio....
i alway still stuck at 9% ( uploading radio process ) when i'm using shipped rom
if i'm using GC to update only radio
(radio i axtracted by tool NBHTOOLS_OLIPRO from rom : RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship_2
or rom:
RUU_Leo_HTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)
but it stucks at this screen :
or
it stuck at screen with red message:
"radio_v2 - rsa fail"
how can i do now???

zkid2010 said:
Okay but please see, the 2.06.51 and the 2.10.50 ...the 51 and 50 are completely different locale radios, as .51 is see in Europe and Asian devices, I use .50 radios and am in the US using T-mobile.
I believe that you have possibly a clash with the radio on your device is not meant for your device. Are you in Asia somewhere? I would try to flash first a radio with 2.xx.51.xx possibly, then a rom that is meant to work for that radio.
As I said from your pictures, you appear to have a radio you should not
Perhaps task29 again but in this process use a 2.xx.51.xx radio, if you can do this successfully you may be then able to get proper rom back on but you must make sure the rom you flash, if it has radio as ship roms usually do, must match your device (the 2.xx.51 most likely!!).
This is very important or you can damage phone. If you can somehow get OS to load on occasion, all hope may not be lost
Click to expand...
Click to collapse
Just an info, my HD2 is from Hongkong. Currently I installed HSPL 2.08 and using Radio 2.12.50. I never have bad experience in using radio both 2.XX.50 and 2.XX.51.
If I were in the situation, I would do the following:
1. go into bootloader screen and checked if HSPL 3 is installed. If not yet, try to install it;
2. with HSPL installed, I will do the Task 29 (2 times)
3. flash the radio 2.12.50
4. install custom rom.
Please correct me if this wrong solution.
Cheers

silverwind said:
Just an info, my HD2 is from Hongkong. Currently I installed HSPL 2.08 and using Radio 2.12.50. I never have bad experience in using radio both 2.XX.50 and 2.XX.51.
If I were in the situation, I would do the following:
1. go into bootloader screen and checked if HSPL 3 is installed. If not yet, try to install it;
2. with HSPL installed, I will do the Task 29 (2 times)
3. flash the radio 2.12.50....i'm stucking at 96% when flash only this radio....
4. install custom rom.
Please correct me if this wrong solution.
Cheers
Click to expand...
Click to collapse
how can i do now ?

hlpdt10 said:
how can i do now ?
Click to expand...
Click to collapse
I'm afraid I don't have any more suggestions You may indeed have a hardware issue. The strange thing is how you could sometimes load the OS. If the phone was completely 'bricked', I doubt you would ever get to the point the OS would actually load. Because of this inconsistency in operation, it leads me to think that perhaps there is indeed hardware issues at play here.
I wish I had other advice but you have errors I have not seen and someone else with similar device does not have same issues.
Best of luck friend

i dont know why but some after times retry...now i'm successful uploading my radio to 2.12.50..
now i'll upload a custom rom...

That's good to know. Give more updates on what happens next.

after update radio....i update one custom rom....after i finish..it still stuck at "stick together " screen..
after that..i reboot the device...but now it cant power on...(
now i'm charging my battery..hope...(

after update radio....i update one custom rom....after i finish..it still stuck at "stick together " screen..
after that..i reboot the device...but now it cant power on...(
now i'm charging my battery..hope...(

now my LEO cant turn on..poor me...

you seem to be flashing random shipped roms.
In theory, when we advise 'flash stock rom', we usually mean the rom that came on the phone, not just any old rom, (however in practice it shouldn't matter, so long as hspl is installed)
Also, to clear up a few of the posts above, regular leos can use tmous radios fine, so ignore stuff like
Okay but please see, the 2.06.51 and the 2.10.50 ...the 51 and 50 are completely different locale radios, as .51 is see in Europe and Asian devices, I use .50 radios and am in the US using T-mobile.
Click to expand...
Click to collapse
Radios are area independant, and only tmous has problems with wrong radio versions. Regular leo can use .50. radios fine, and the ionly time a radio will cause a regular leo problems is if you flash a 576RAM enabled rom and still have a ..51.. radio installed, in which case the phone hangs at grey screen until you flash the ..50.. radio.
You should
0 - remove sd card and sim
1 - task 29
2 - boot to bootloader - confirm that your spl is "x.xx.hspl" and not "x.xx.0000"
2.5 - if it ends 0000 then run hspl3 and choose 2.08.hspl
3 - connect to usb
4 - flash a rom
5 - once flash is complete, and teh phone begins to boot, pull teh battery and force a hard reset
6 - if you chose a custom rom, you should now confirm you have a matching radio. (i.e a .50. radio if the rom has 576RAM unlocked, or is a 2.x tmous base version)
7 - if you flashed a stock rom, then let it boot.
let us know how it goes.
EDIT - oh and stop using sd card to flash, if you flash a stock from sd it removes hspl, so everything after that will fail. You sure you dont have an nbh image on your sd card you forgot about?

Need help reformatting my Hd2

So over the weekend I bought the Hd2 and tried installing android. Which I did, to a certain point. However I get no sound because haret is launched before CLRCAD.EXE.
The reason for this is I installed one of the boot loader where it automatically runs those two files boots Android automatically.
Before I use to reformat the SD card via computer and the phone through WinMo but now I dont have an option to boot in WinMo at all. How can I reformat my device since I can run WinMo.
Any ideas? Thanks in advance

Take the card out and put it into your computer then format.

FriedSushi87 said:
Take the card out and put it into your computer then format.
Click to expand...
Click to collapse
I have done that, but it still boots the program and comes to a screen saying " Launch Android" or "File Explorer". I might have accidentally saved the program on the phone rather than the SD card.
It does not give me an option to boot in WinMo where I need to reformat my phone.
Is there any other way where I can reformat my phone?

try a hard reset
power off then back on while holding the volume button in (up and down)
follow on screen instructions.

try a task 29.search for it in the forums

I will try this later on and report back. Thanks for your help

Julian2103 said:
try a task 29.search for it in the forums
Click to expand...
Click to collapse
i agree but be careful and read everything
http://forum.xda-developers.com/showthread.php?t=653614

The follow recommendations did not work, is there any other way? I still have the android boot screen to show after a boot.
I reformated the SD card, the phone, and did factory reset and hard reset.

Julian2103 said:
try a task 29.search for it in the forums
Click to expand...
Click to collapse
Don't do this... warranty, try hard reset

contender1543 said:
The follow recommendations did not work, is there any other way? I still have the android boot screen to show after a boot.
I reformated the SD card, the phone, and did factory reset and hard reset.
Click to expand...
Click to collapse
Something you are doing wrong... did you install another ROM?
Are u trying make hard reset with another rom with a bootloader?
If you did try task29, wich rom you use?
Try to run a stock Rom
Pm if you need help

caedanne said:
Something you are doing wrong... did you install another ROM?
Are u trying make hard reset with another rom with a bootloader?
If you did try task29, wich rom you use?
Try to run a stock Rom
Pm if you need help
Click to expand...
Click to collapse
I used chunkyROM
and installed the 2.08HSPL and TMOUS Radio to 2.11
then after doing factory reset and reformating everything, it still boots energy rom where theres two links on the bottom "launch android" and " file explorer"

contender1543 said:
I used chunkyROM
and installed the 2.08HSPL and TMOUS Radio to 2.11
then after doing factory reset and reformating everything, it still boots energy rom where theres two links on the bottom "launch android" and " file explorer"
Click to expand...
Click to collapse
You need try this: http://www.htc.com/www/SupportDownload.aspx?p_id=297&cat=2&dl_id=856
First stock again, if you dont change to another Rom problem will appear again :S
After that, read this: http://forum.xda-developers.com/showthread.php?t=713977 carefully

caedanne said:
You need try this: http://www.htc.com/www/SupportDownload.aspx?p_id=297&cat=2&dl_id=856
First stock again, if you dont change to another Rom problem will appear again :S
After that, read this: http://forum.xda-developers.com/showthread.php?t=713977 carefully
Click to expand...
Click to collapse
I am not able to use the first link because I do have a Tmobile USA phone and the website stated its not recommended for that phone.
I will look into the second thread which I did not come across as of yet. Hopefully there might be something useful for me.
This is the information I get when I boot the screen
R: 2.12.50.02.2
G: 15.40.50.07u
D: D2 Energy
Then it takes me to the following screen after booting up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then this when I hit the menu button
perhaps you can shed some light on where I should look in the other thread.. Remember I tried flashing and doing factory reset to the phone and the SD card and nothing. I also used ChunkyRom

Use hspl2 or hspl3 since your on TMO-USA and reflash your bootloader then flash with a totally different rom.

Try to uninstall the the android bootloader from remove programs under settings/system?

iky10 said:
Use hspl2 or hspl3 since your on TMO-USA and reflash your bootloader then flash with a totally different rom.
Click to expand...
Click to collapse
Alright I use thread to flash my device
http://forum.xda-developers.com/showthread.php?t=653614
How do you flash your bootloader though? Or does that do it automatically when flashing the device.

mate, enter bootloader (phone off, then phone on while holding VOLUME DOWN key) then connect your phone through USB to the PC and re-flash a new ROM via PC.
Make sure you have HSPL installed on the phone! If not try searching for HSPL2 and install it while in bootloader. Make sure you read the instructions.
It should be OK!

chribruu said:
Try to uninstall the the android bootloader from remove programs under settings/system?
Click to expand...
Click to collapse
I couldnt find that file
where is it exactly located it? I checked settings/system and check individual folders on the device and sd card under file explorer..

caedanne said:
Don't do this... warranty, try hard reset
Click to expand...
Click to collapse
Task 29 wont hurt your warranty... If all else fails I would Task 29 and just re flash a ROM. Read up a bit before installing Android again OP so that you know what to do in situations like this and dont get stuck with a dead phone

Software update failed! Please try again. - Error

Hey guys,
I recently had issues with the HD2 I purchased from ebay. The seller said it was fine and it was, just a few little screen cracks and lag issues had to be mended.
So I did what most people do and took it to my local phone repair store.
Now, I sent it in and it was booting magldr and android RAFdroid 2.2 or something like that and everything was fine just lagging and shutting down when I ran large games or large apps ( main problem ) <-- the reason I wanted it fixed.
But now it came back into my possession and it wont boot at all it just comes up with the image posted below.
the only thing I have managed to boot onto it is the HTC default stock - RUU_Leo_Telstra_WWE_1.72.841.0 -
BUT
Even the - RUU_Leo_S_HTC_WWE_3.14.405.2 - Didn't work.
Is my phone screwed? where should I go from here?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

you flashed telstra rom, but sure its a telstra model hd2? That screen is usually encountered when one tries to flash the wrong stock rom whilst hspl is installed.

Hey I also just tried installing the
and that failed but I got this message (read below), any ideas?
I'm going to continue trying to flash more stock roms until one works that isn't the telstra one.
Do you have any idea's on what I could do to maybe erase all the data on it and start again?
(I'm pretty sure task29 only does a specific part of data deletion)

well first off, IS it a telstra? It will say telstra on the actual phone if i'm not mistaken? (or perhaps not, cant remember)
Secondly, what does it say in bootloader? (all lines, please)

I had the same problem
Hi, I had the same problem yesterday but soon had it fixed!
First you have to make sure you've got the correct stock ROM, as samosamuel pointed out. You should just be able to go to your countries HTC site and find your ROM.
Download the ROM, rename it to .zip and extract the files. Find the file with the .nbh extension, copy it to the root of your micro-sd card. Boot your phone holding down power and volume down. It should now install fine.

Thank you all so much for your help.
After installing the correct stock rom I was able to re-install the HSPL and then Magldr Thank you.

software update failed
Hey guys,
I recently had issues with the HD2 I purchased from ebay. The seller said it was fine and it was, just a few little screen cracks and lag issues had to be mended.
So I did what most people do and took it to my local phone repair store.
Now, I sent it in and it was booting magldr and android RAFdroid 2.2 or something like that and everything was fine just lagging and shutting down when I ran large games or large apps ( main problem ) <-- the reason I wanted it fixed.
But now it came back into my possession and it wont boot at all it just comes up with the image posted below.
the only thing I have managed to boot onto it is the HTC default stock - RUU_Leo_Telstra_WWE_1.72.841.0 -
BUT
Even the - RUU_Leo_S_HTC_WWE_3.14.405.2 - Didn't work.
Is my phone screwed? where should I go from here?

soliman83 said:
the only thing I have managed to boot onto it is the HTC default stock - RUU_Leo_Telstra_WWE_1.72.841.0 -
Even the - RUU_Leo_S_HTC_WWE_3.14.405.2 - Didn't work.
Click to expand...
Click to collapse
well for a start there are no hd2s that would take both of those roms, , , they are for different versions. The wwe 3.14 is for unbranded (carrier unlocked) regular hd2s, the 1.72 one is for telstra branded hd2s, , so a phone that took one wouldn't take the other (well unless using hspl of course, but im just making the point that it isn't as simple as getting 'a' stock rom).
so, first job - enter bootloader (power off - voldown(keep holding this) - tap and release power)
in stripey screen, (bootloader) please write out all the lines (or take a picture)

Captain_coco265 said:
Hey guys,
I recently had issues with the HD2 I purchased from ebay. The seller said it was fine and it was, just a few little screen cracks and lag issues had to be mended.
So I did what most people do and took it to my local phone repair store.
Now, I sent it in and it was booting magldr and android RAFdroid 2.2 or something like that and everything was fine just lagging and shutting down when I ran large games or large apps ( main problem ) <-- the reason I wanted it fixed.
But now it came back into my possession and it wont boot at all it just comes up with the image posted below.
the only thing I have managed to boot onto it is the HTC default stock - RUU_Leo_Telstra_WWE_1.72.841.0 -
BUT
Even the - RUU_Leo_S_HTC_WWE_3.14.405.2 - Didn't work.
Is my phone screwed? where should I go from here?
Click to expand...
Click to collapse
Just download HSPL4 and reinstall hspl to version 2.08 and then flash your rom. Its all over the forum how to solve this problem. Just search the forum.
Sent from my HTC HD2 using xda premium

Flash back to window... I seen that image or prompt before...
Sent from my LG-P999 using xda premium

Thnk u...
Veggi said:
Hi, I had the same problem yesterday but soon had it fixed!
First you have to make sure you've got the correct stock ROM, as samosamuel pointed out. You should just be able to go to your countries HTC site and find your ROM.
Download the ROM, rename it to .zip and extract the files. Find the file with the .nbh extension, copy it to the root of your micro-sd card. Boot your phone holding down power and volume down. It should now install fine.
Click to expand...
Click to collapse
Thnx buddy...