Database Users

One more brick to the Cathedral

This is my first Thread and unfortunately for the worst reason, that’s right … my WISA200 (Qtek 9100) is officially a brick.
For one week now that I’m surfing this forum looking for a solution. No success.
Long story short….
I’ve “see the light” with XDA and got so addict that I’ve started to make all the ROM’s I could get my hands on…last I got RUU_Molski.Biz_226102_22610105_022511_WWE-30MB (G3 Device. IPL/SPL like: 2.xx) and I was a very happy person, thanks to Molski.
The problem was that my enthusiasm did not stop and I made the big mistake …my own ROM.
My idea was quite simple, use the 3.0 Molski Rom thaking out the extended and that’s it, clean OS … I’ve tried sereval times and versions without any problem until one week ago...
I got the boot screen and never got read of it. The strange thing is that when previously the IPL and SPL were 2.26, now is IPL 2.26 and the SPL 2.18.0001.
I’ve already tried everything, without success …..
Downgrade:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Old Molski great job (how I miss it):
and even MiniSD image:
Nothing works …..
I’ve Google search (it always goes back here) and nothing……
Has any one got this boot screen before?
Thanks in advance even for those who just will read my post and … why not …laugh on me ….brick nerd….
Obrigado,
The Nerd

If it's getting as far as the boot screen, you should still be able to get into the bootloader (see wiki) and try a flash that way.

Looking for help .....
Alan, thank you for your care and time reading my post.
Unfortunatelly I've spent my day using the different bootloaders tools and solutions and nothing works .... or I'm making the wrong procedure. I've even created (I think) a MiniSD SPL upgrade, but it did not work.
It seams the phone stops responding when I try to make any think.
MTTY without error, seams not to do anything although it connects to the phone ...
If anyone else has any ideas I would apriciate a lot.
Once more thanks Alan.

HAPPY
I did not stop trying even though the bootloader did not work properlly, so still I insisted on inserting a rom, and I've tryed this one:
Qtek_9100_Telia_Danish_2.18.7.9245
Now it is on 98% I am really happy.
I'll keep you guys posted.
Nerd!

now that u got that far.... go as alan points out to this thread with unlock advice and follow the procedure to get a good bootloader unlocked and all

the process went all the way to the end but it came back again to the bootscreen rgb screen without any change still the IPL is 2.26 and the SPL 2.18.0001, does this mean my wizard is G4 and all the problems come from there? .....
I've made the format procedure, but still gives me FAT error.
Also I made a huge digging in the wiki and all posts to get in to the bootloader to change it or correct the SPL nothing has worked for me. Does any one has a SD image (any langue dont care!) which might solve me the problem?
Thanks a million.
Nerd ....
I promisse if I solve this I will never make a rom again!!!!

Problem solved!!!!
The issue was a new motherboard ... yes... hardware failure.
As anyone expirenced similar issues?
Thanks to all support.

When you tried to flash to molski's rom it gave you an error 300 message. This message is usually displayed on a G4 device (you're SPL is a G4 SPL now). I think it could be flashed to you're device if you replace the "ROMUpdateUtility_Wizard_NoID.exe" with the one that works on G3 and G4 devices from this thread:
http://forum.xda-developers.com/showthread.php?t=291215
If this doesn't work, try flashing the wizard_love rom. It seems to flash to almost every device out there.
Good luck!

I need the original Vodafone splash image

Hello,
In order to take it to repair (again) for the G sensor problem I need to put back the original Vodafone splash screen.
Can someone upload it somewhere?
Also I have an engineered spl (had the perfect one). Should I change it too? Or the guys from the repair won't notice that?
Thanks

you should change the spl to a standard one really as they will tell straight away. Do you know what your orignal one was?
Cant find the original splash screen but heres a similar one i have made
The image looks pants in preview but is perfect once splashed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks for the image.
I had the 1.33.0010 one. Now it's the same but engineered with S-OFF.
Where can I find the original one?
I had a nandroid backup of my original rom after changing the SPL. Now i'm running the original software, but with wrong spl. It will be enough just to apply the the perfect SPL before going to repairs?

I woudnt like to say really, i have had mine repaired it had the spl for g1/dream n it (bricked) i didnt get charged for the repair
This thread has shipment spl Thanks to AMON_RA

I had mine repaired too, ut it was bricked...so it was impossible to say that i had another rom/spl. But now the scenario is different...the phone is up and running. Only the G sensor isn't working

you tried doing a factory reset?

And not just once...
In Teeter game the ball is going in the upper right corner and is staying there no matter what.

Have you tried amon ra recovery 1.2.3?has a fix rotate option in the recovery,you don't have to flash it only boot.
Could you tell me all The about phone info like kernel etc for the original voda rom? Would be a great help to me.

Just tried the repair from the recovery...no luck with it.
Also i jst figured that I don't have the original ROM anymore....I will try to take it from someone else. And after that....repairing center
Another thing....how can I put back the original perfect SPL (1.33.0010)?

I made a nandroid backup of the South African Magic ROM when I first got the phone. If someone can tell me how to upload it, I will.
In return, if someone can help me root the phone, that would be greatly appreciated. I've got the recovery flasher loaded, and it seems to work, but any attempt to load a custom ROM just ends up in a hang and I need to revert.
I don't think most ROMs are compatible with whatever customised software we use here. It may have something to do with the radio version. DON'T FLASH A RADIO UPGRADE! I learnt that the hard way.
Regard,
H

I've managed to change the eng SPL 1.33.2010 S-OFF to 1.33.0009 S-ON and now I cannot change the splash screen anymore...
How can I keep it on the original SPL side but with the Vodafone splash image?
Thanks

flash the image BEFORE you flash the perfect spl

I couldn't find the perfect SPL...so now it's in the repair center wit 1.33.0009 S-ON spl and the original rom image in it...maybe they won't find that as it's a hardware issue for sure.

Need help reformatting my Hd2

So over the weekend I bought the Hd2 and tried installing android. Which I did, to a certain point. However I get no sound because haret is launched before CLRCAD.EXE.
The reason for this is I installed one of the boot loader where it automatically runs those two files boots Android automatically.
Before I use to reformat the SD card via computer and the phone through WinMo but now I dont have an option to boot in WinMo at all. How can I reformat my device since I can run WinMo.
Any ideas? Thanks in advance

Take the card out and put it into your computer then format.

FriedSushi87 said:
Take the card out and put it into your computer then format.
Click to expand...
Click to collapse
I have done that, but it still boots the program and comes to a screen saying " Launch Android" or "File Explorer". I might have accidentally saved the program on the phone rather than the SD card.
It does not give me an option to boot in WinMo where I need to reformat my phone.
Is there any other way where I can reformat my phone?

try a hard reset
power off then back on while holding the volume button in (up and down)
follow on screen instructions.

try a task 29.search for it in the forums

I will try this later on and report back. Thanks for your help

Julian2103 said:
try a task 29.search for it in the forums
Click to expand...
Click to collapse
i agree but be careful and read everything
http://forum.xda-developers.com/showthread.php?t=653614

The follow recommendations did not work, is there any other way? I still have the android boot screen to show after a boot.
I reformated the SD card, the phone, and did factory reset and hard reset.

Julian2103 said:
try a task 29.search for it in the forums
Click to expand...
Click to collapse
Don't do this... warranty, try hard reset

contender1543 said:
The follow recommendations did not work, is there any other way? I still have the android boot screen to show after a boot.
I reformated the SD card, the phone, and did factory reset and hard reset.
Click to expand...
Click to collapse
Something you are doing wrong... did you install another ROM?
Are u trying make hard reset with another rom with a bootloader?
If you did try task29, wich rom you use?
Try to run a stock Rom
Pm if you need help

caedanne said:
Something you are doing wrong... did you install another ROM?
Are u trying make hard reset with another rom with a bootloader?
If you did try task29, wich rom you use?
Try to run a stock Rom
Pm if you need help
Click to expand...
Click to collapse
I used chunkyROM
and installed the 2.08HSPL and TMOUS Radio to 2.11
then after doing factory reset and reformating everything, it still boots energy rom where theres two links on the bottom "launch android" and " file explorer"

contender1543 said:
I used chunkyROM
and installed the 2.08HSPL and TMOUS Radio to 2.11
then after doing factory reset and reformating everything, it still boots energy rom where theres two links on the bottom "launch android" and " file explorer"
Click to expand...
Click to collapse
You need try this: http://www.htc.com/www/SupportDownload.aspx?p_id=297&cat=2&dl_id=856
First stock again, if you dont change to another Rom problem will appear again :S
After that, read this: http://forum.xda-developers.com/showthread.php?t=713977 carefully

caedanne said:
You need try this: http://www.htc.com/www/SupportDownload.aspx?p_id=297&cat=2&dl_id=856
First stock again, if you dont change to another Rom problem will appear again :S
After that, read this: http://forum.xda-developers.com/showthread.php?t=713977 carefully
Click to expand...
Click to collapse
I am not able to use the first link because I do have a Tmobile USA phone and the website stated its not recommended for that phone.
I will look into the second thread which I did not come across as of yet. Hopefully there might be something useful for me.
This is the information I get when I boot the screen
R: 2.12.50.02.2
G: 15.40.50.07u
D: D2 Energy
Then it takes me to the following screen after booting up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then this when I hit the menu button
perhaps you can shed some light on where I should look in the other thread.. Remember I tried flashing and doing factory reset to the phone and the SD card and nothing. I also used ChunkyRom

Use hspl2 or hspl3 since your on TMO-USA and reflash your bootloader then flash with a totally different rom.

Try to uninstall the the android bootloader from remove programs under settings/system?

iky10 said:
Use hspl2 or hspl3 since your on TMO-USA and reflash your bootloader then flash with a totally different rom.
Click to expand...
Click to collapse
Alright I use thread to flash my device
http://forum.xda-developers.com/showthread.php?t=653614
How do you flash your bootloader though? Or does that do it automatically when flashing the device.

mate, enter bootloader (phone off, then phone on while holding VOLUME DOWN key) then connect your phone through USB to the PC and re-flash a new ROM via PC.
Make sure you have HSPL installed on the phone! If not try searching for HSPL2 and install it while in bootloader. Make sure you read the instructions.
It should be OK!

chribruu said:
Try to uninstall the the android bootloader from remove programs under settings/system?
Click to expand...
Click to collapse
I couldnt find that file
where is it exactly located it? I checked settings/system and check individual folders on the device and sd card under file explorer..

caedanne said:
Don't do this... warranty, try hard reset
Click to expand...
Click to collapse
Task 29 wont hurt your warranty... If all else fails I would Task 29 and just re flash a ROM. Read up a bit before installing Android again OP so that you know what to do in situations like this and dont get stuck with a dead phone

Software update failed! Please try again. - Error

Hey guys,
I recently had issues with the HD2 I purchased from ebay. The seller said it was fine and it was, just a few little screen cracks and lag issues had to be mended.
So I did what most people do and took it to my local phone repair store.
Now, I sent it in and it was booting magldr and android RAFdroid 2.2 or something like that and everything was fine just lagging and shutting down when I ran large games or large apps ( main problem ) <-- the reason I wanted it fixed.
But now it came back into my possession and it wont boot at all it just comes up with the image posted below.
the only thing I have managed to boot onto it is the HTC default stock - RUU_Leo_Telstra_WWE_1.72.841.0 -
BUT
Even the - RUU_Leo_S_HTC_WWE_3.14.405.2 - Didn't work.
Is my phone screwed? where should I go from here?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

you flashed telstra rom, but sure its a telstra model hd2? That screen is usually encountered when one tries to flash the wrong stock rom whilst hspl is installed.

Hey I also just tried installing the
and that failed but I got this message (read below), any ideas?
I'm going to continue trying to flash more stock roms until one works that isn't the telstra one.
Do you have any idea's on what I could do to maybe erase all the data on it and start again?
(I'm pretty sure task29 only does a specific part of data deletion)

well first off, IS it a telstra? It will say telstra on the actual phone if i'm not mistaken? (or perhaps not, cant remember)
Secondly, what does it say in bootloader? (all lines, please)

I had the same problem
Hi, I had the same problem yesterday but soon had it fixed!
First you have to make sure you've got the correct stock ROM, as samosamuel pointed out. You should just be able to go to your countries HTC site and find your ROM.
Download the ROM, rename it to .zip and extract the files. Find the file with the .nbh extension, copy it to the root of your micro-sd card. Boot your phone holding down power and volume down. It should now install fine.

Thank you all so much for your help.
After installing the correct stock rom I was able to re-install the HSPL and then Magldr Thank you.

software update failed
Hey guys,
I recently had issues with the HD2 I purchased from ebay. The seller said it was fine and it was, just a few little screen cracks and lag issues had to be mended.
So I did what most people do and took it to my local phone repair store.
Now, I sent it in and it was booting magldr and android RAFdroid 2.2 or something like that and everything was fine just lagging and shutting down when I ran large games or large apps ( main problem ) <-- the reason I wanted it fixed.
But now it came back into my possession and it wont boot at all it just comes up with the image posted below.
the only thing I have managed to boot onto it is the HTC default stock - RUU_Leo_Telstra_WWE_1.72.841.0 -
BUT
Even the - RUU_Leo_S_HTC_WWE_3.14.405.2 - Didn't work.
Is my phone screwed? where should I go from here?

soliman83 said:
the only thing I have managed to boot onto it is the HTC default stock - RUU_Leo_Telstra_WWE_1.72.841.0 -
Even the - RUU_Leo_S_HTC_WWE_3.14.405.2 - Didn't work.
Click to expand...
Click to collapse
well for a start there are no hd2s that would take both of those roms, , , they are for different versions. The wwe 3.14 is for unbranded (carrier unlocked) regular hd2s, the 1.72 one is for telstra branded hd2s, , so a phone that took one wouldn't take the other (well unless using hspl of course, but im just making the point that it isn't as simple as getting 'a' stock rom).
so, first job - enter bootloader (power off - voldown(keep holding this) - tap and release power)
in stripey screen, (bootloader) please write out all the lines (or take a picture)

Captain_coco265 said:
Hey guys,
I recently had issues with the HD2 I purchased from ebay. The seller said it was fine and it was, just a few little screen cracks and lag issues had to be mended.
So I did what most people do and took it to my local phone repair store.
Now, I sent it in and it was booting magldr and android RAFdroid 2.2 or something like that and everything was fine just lagging and shutting down when I ran large games or large apps ( main problem ) <-- the reason I wanted it fixed.
But now it came back into my possession and it wont boot at all it just comes up with the image posted below.
the only thing I have managed to boot onto it is the HTC default stock - RUU_Leo_Telstra_WWE_1.72.841.0 -
BUT
Even the - RUU_Leo_S_HTC_WWE_3.14.405.2 - Didn't work.
Is my phone screwed? where should I go from here?
Click to expand...
Click to collapse
Just download HSPL4 and reinstall hspl to version 2.08 and then flash your rom. Its all over the forum how to solve this problem. Just search the forum.
Sent from my HTC HD2 using xda premium

Flash back to window... I seen that image or prompt before...
Sent from my LG-P999 using xda premium

Thnk u...
Veggi said:
Hi, I had the same problem yesterday but soon had it fixed!
First you have to make sure you've got the correct stock ROM, as samosamuel pointed out. You should just be able to go to your countries HTC site and find your ROM.
Download the ROM, rename it to .zip and extract the files. Find the file with the .nbh extension, copy it to the root of your micro-sd card. Boot your phone holding down power and volume down. It should now install fine.
Click to expand...
Click to collapse
Thnx buddy...

after boot to android welcome screen, the screen fade to black

hi,
i try to figure why , buy when i start the device he boot regular to adnroid but after 3 sec the screen fade to black and not responding.
the device worked good.
i decide to back to wm 6.5 and then all this mess start.
use hspl 2.08 , radio 2.15.50.14 , leo t8585 , magldr 1.13 .
any idea?
thanks.

Need more info ...
What ROM were you using?
What was the last thing you had done before this problem started?
Are you on NativeSD, SD or NAND? if NAND, which recovery?
We can't help you if you don't help us help you.

thanks for your help.
last thing i did is downloaded wm stock : RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
but after installed this stock , phone was stuck on htc white screen with some letters in red in the left corner.
after i saw that i cant install this wm so i tried to back to the old nanndroid.
installed hspl 2.08
magldr 1.13
recovery 150M
clockwork mode 3.0.0.5
with this i installed once :
typhoon rom and hyperdroid
after that i used recovery with 400M and coredroid rom.
maybe its importent to tell that in the recovery and in the boot animation and pics there is no problam.
same same with all this
thanks again.

I wonder why people flash back to stock, and when they get problems they flash back to android.
Okay, use the HD2 Toolkit (google it) to repartition your NAND and install a later recovery. Choose a bigger partition than 150, like say 180. After that, install Typhoon or Hyperdroid and see if it works.
I am telling you this because I can't see anything wrong in your steps.

Luckycookies said:
thanks for your help.
last thing i did is downloaded wm stock : RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
but after installed this stock , phone was stuck on htc white screen with some letters in red in the left corner.
after i saw that i cant install this wm so i tried to back to the old
Click to expand...
Click to collapse
Did you switch HSPL back before flashing WinMo??
Luckycookies said:
installed hspl 2.08
magldr 1.13
recovery 150M
clockwork mode 3.0.0.5
after that i used recovery with 400M and coredroid rom.
maybe its importent to tell that in the recovery and in the boot animation and pics there is no problam.
Click to expand...
Click to collapse
I hope that 150 MB for recovery is wrong! Your recovery partition should only be 7-10 MB!
Further you said 400 MB - is that the system partition? Are you planning to use DataOnEXT?
Make sure you set partition sizes correctly for the ROM being installed. If you have the space make the system partition 20-100 MB larger than minimum recommended in case you have bad blocks.
Hanging at boot animation can be a sign of insufficient free space in system or data partition or corrupt binaries.
This is one of the few times I might recommend a Task 29 to start clean.
---
Don't walk behind me; I may not lead. Don't walk in front of me; I may not follow. Just walk beside me and be my friend. (via Tapatalk)

hi,
i already use the task29 to delete all.
i used recovery 400 because i use ext partition with coredroid rom that use sens3.5.
after flashed wm from the start, i return to spl 2.08.
i preffer to back to wm , so if someone can help with that it will be the best.
the phone stuck after flash with the htc white screen
r 2.15.50.14
g 15.42.50.1 1u
d 3.14.04666
mayb this will help you to help me

I think you're confusing the /system partition and the recovery partition. You should change the /system partition to whatever is needed by the ROM but leave the recovery partition the same. The easiest thing to do is follow what both of the above posts say and flash a slightly larger than needed partition to account for any bad blocks by using the HD2 toolkit.
If you want to flash back to WinMo then just flash the Stock RUU from the bootloader. You shouldn't need HSPL to do this (AFAIK) but I'd flash HSPL2.08 just in case. As Marvlesz said, I also don't see anything wrong with your steps. If that doesn't work, try flashing a stock ROM from the SD card (google it).

ny_limited said:
I hope that 150 MB for recovery is wrong! Your recovery partition should only be 7-10 MB!
Further you said 400 MB - is that the system partition? Are you planning to use DataOnEXT?
Click to expand...
Click to collapse
Nigeldg said:
I think you're confusing the /system partition and the recovery partition. You should change the /system partition to whatever is needed by the ROM but leave the recovery partition the same
Click to expand...
Click to collapse
He's probably referring to the old recovery packages. The 150mb, 250mb and 400mb. Hence the old recovery version(?)

Marvlesz said:
He's probably referring to the old recovery packages. The 150mb, 250mb and 400mb. Hence the old recovery version(?)
Click to expand...
Click to collapse
Yeah I think ny_limited is pointing out the fact that he said 'recovery partition' when he meant 'system partition'. The old recovery version shouldn't matter, I still use the old packages and edit the flash.cfg and all ROMs I try work fine for me.

Luckycookies said:
i preffer to back to wm , so if someone can help with that it will be the best.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Depending on what you have used (HSPL 2 or 4) make sure you are set on either 1.66.000 SPL (HSPL2 file) or 2.08.000 (HSPL4 file).
Make sure you have the original Stock ROM/SPL for your appropriate HD2 - there probably are others but these are the ones I can find quickly at the moment:
T-Mobile Stock ROM/SPL
ELL HTC HD2 Stock ROM/SPL
French HTC HD2 Stock ROM/SPL
NLD HTC HD2 Stock ROM/SPL​
Extract the .zip file the ROM comes in (if it comes in one).
Plug your phone in via USB.
Sync it with ActiveSync or Windows Device Center 6.1 and wait for it to finish.
Double click the .exe file inside the folder we extracted earlier.
Follow the prompts and wait for it to finish flashing.
Once it is done, click ok, close the program, and reboot the phone.
If all goes well that should bring you back to Windows Mobile...

already flashed a lot of roms in the last 48 hour with any method.
sd, treecolor bootloader, android, wp7.
wp7 work, android stuck when it finish loading system, winmo stuck when it in the htc screen with red letters in the left corner.
i did try with nativesd and same same.
all installs finish sucessfully.
hspl 2.08, 3.03, 1.66 everything :|
full wipe before.
wp7 works well so its not a hardware problem.
full phone details:
SKU,HTC,English-WWE,GBR,RigidGray,w/oSIM Lock,LEO-C9#EMEA
UNITED KINGDOM
vergin phone
i am desperate

someone ? :\

Luckycookies said:
already flashed a lot of roms in the last 48 hour with any method.
sd, treecolor bootloader, android, wp7.
Click to expand...
Click to collapse
Any ROM is flashed through the "treecolor bootloader", and if you can't flash your original WinMo through SD, there might be a "big" problem.
Luckycookies said:
wp7 work, android stuck when it finish loading system, winmo stuck when it in the htc screen with red letters in the left corner.
Click to expand...
Click to collapse
Explain further, what do you mean byt "android stuck when it finish loading system"? You mean you can see the setup wizard/lock screen but then your screen becomes unresponsive? Or you get bootloops? Or Everything force closes? What is "stuck" exactly?
Luckycookies said:
i did try with nativesd and same same.
all installs finish sucessfully.
hspl 2.08, 3.03, 1.66 everything :|
Click to expand...
Click to collapse
Did you REALLY try nativeSD or you're just adding it to your thread without knowing what it is? Because NativeSD should have worked unless your device has a hardware issue or your setup was incorrect
You don't need HSPL to flash windows mobile, and MAGLDR doesn't work on other than 2.08.HSPL, so why flash 3.03 and 1.66? Just flash the 2.08 and stick to it.
Luckycookies said:
full wipe before.
wp7 works well so its not a hardware problem.
Click to expand...
Click to collapse
Not necessarily, but if it's not, then you must be doing something wrong you're not telling us about .
Luckycookies said:
full phone details:
SKU,HTC,English-WWE,GBR,RigidGray,w/oSIM Lock,LEO-C9#EMEA
UNITED KINGDOM
vergin phone
i am desperate
Click to expand...
Click to collapse
You can try this method: http://forum.xda-developers.com/showthread.php?t=1633243
Even though you don't have fatal hit, you can't flash anything (as you say)
I still can't understand how you can flash MAGLDR, CWM and WP7 yet you can't install Windows Mobile.
Are you sure that everything installs successfully?

yes im sure that everything install successfully...
ill try it later today thanks

hi,
this method not work to.
any other ideas? :\
when i flash android with magldr its complete. when i start config the screen fade to a blank.
computer still recognize the hd2 , charge led display and buttons led 2.