Database Users

[Q] Real world noticeable benefits of Over clocking G2?

Hey,
So I'm on the fence about perma rooting and over clocking my G2, but i have a few questions:
1) Will my battery life suffer greatly due to over clocking say to 1Ghz or 1.4Ghz?
2) Are there any real world noticeable real world performance gains besides benchmark scores?
3) Will perma-Rooting it decrease performance? (Back when i had the mytouch 3g, the phone never felt as snappy after i rooted and installed custom roms, as compared to stock).
Thanks

1) battery life is the same if not better when overclocked with setcpu in ondemand mode at 245/1100mhz
2) there is a definite performance increase
3) custom roms can decrease performance depending on the rom and ui (sense is a bit heavy). Just simply rooting will not decrease performance. Also, CM6.1 is super snappy, especially using Launcher42
DO IT!
Sent from my T-Mobile G2

thedarkpassenger said:
1) battery life is the same if not better when overclocked with setcpu in ondemand mode at 245/1100mhz
2) there is a definite performance increase
3) custom roms can decrease performance depending on the rom and ui (sense is a bit heavy). Just simply rooting will not decrease performance. Also, CM6.1 is super snappy, especially using Launcher42
DO IT!
Sent from my T-Mobile G2
Click to expand...
Click to collapse
Launcher42? that's a heck lot of upgrade from Launcher2 I'd like to check it out
but he's right overclocking is not going to eat up your battery much. Heavy graphic ROMs do however suck up battery and performance. I personally like to stick to rooted stock roms and tune up here and there to fit my personal needs.
You should however read carefully and make sure to understand every steps you're doing if you want to root your phone.

androidtoy09 said:
Launcher42? that's a heck lot of upgrade from Launcher2 I'd like to check it out
but he's right overclocking is not going to eat up your battery much. Heavy graphic ROMs do however suck up battery and performance. I personally like to stick to rooted stock roms and tune up here and there to fit my personal needs.
You should however read carefully and make sure to understand every steps you're doing if you want to root your phone.
Click to expand...
Click to collapse
thedarkpassenger said:
1) battery life is the same if not better when overclocked with setcpu in ondemand mode at 245/1100mhz
2) there is a definite performance increase
3) custom roms can decrease performance depending on the rom and ui (sense is a bit heavy). Just simply rooting will not decrease performance. Also, CM6.1 is super snappy, especially using Launcher42
DO IT!
Sent from my T-Mobile G2
Click to expand...
Click to collapse
Alright I'm going to give it a shot later tonight probably, i forgot about the SETCPU profiles where you can have the phone under clocked while the screen is off. That should definitely give me better battery life. Ill be back to post results

kcm117 said:
Alright I'm going to give it a shot later tonight probably, i forgot about the SETCPU profiles where you can have the phone under clocked while the screen is off. That should definitely give me better battery life. Ill be back to post results
Click to expand...
Click to collapse
Good luck and I'm sure you will enjoy your G2.
Oh, and don't forget to show it off to your friends. Let them see how this thing "Fly"

I oc to 1.4+ with setcpu and a few profiles set up i get much better bat life then stock. Im also running a sense rom which feels sluggish until you oc. At 1.4 it runs smooth as can be with live wallpapers plus all the pretty sense animations. The only problem i have is i hate the sense dialer and msg system also i want to change the "personalise" tab....do people really change theyre settings everyday that they need a dedicated button for it? Anyway i digress
Sent from my HTC Vision using XDA App

Excuse me, since when does increasing the clockspeed of your CPU INCREASE battery life?!

convolution said:
Excuse me, since when does increasing the clockspeed of your CPU INCREASE battery life?!
Click to expand...
Click to collapse
No, that's not entirely true BUT with SetCPU you can profile it with different mode which can benefit the battery life.

kcm117 said:
Hey,
So I'm on the fence about perma rooting and over clocking my G2, but i have a few questions:
1) Will my battery life suffer greatly due to over clocking say to 1Ghz or 1.4Ghz?
2) Are there any real world noticeable real world performance gains besides benchmark scores?
3) Will perma-Rooting it decrease performance? (Back when i had the mytouch 3g, the phone never felt as snappy after i rooted and installed custom roms, as compared to stock).
Thanks
Click to expand...
Click to collapse
I don't notice any difference in battery and I have the 1.9ghz kernel. I normally keep it at 1ghz though. I enjoy it overclocked. My games run incredibly smooth, when navigating my phone it literally almost feels like it knows what i'm pressing a split second before i do and benchmarks rape the face off anyone else I know with an android phone. It's just sooo smooth. It really boils down to being the kind of person who likes to hold a powerhouse of a phone in the palm of their hand. (Literally) with even just the 1.4ghz OC you'll never have to ask yourself "can my phone run this without being sluggish?" because the answer is yes, it can probably even run two or three instances of whatever made you question yourself in the first place without being sluggish. Any if you're worried about custom roms from the past, just remember how outdated your old android is compared to this one. No offense because I can relate, I used to have a G1 that is now a hand-me-down to my brother and whenever he asks me to mod something on it, I'm just amazed at how slow it is and really don't know how I tolerated it for the last 2 years. I mean I'd score a 150 quadrant on the G1 (on a good day) but with my full OC on, the G2 scores 3000~3100. That's roughly 20 times faster...
Bottom line is that you won't need to worry about "will this make my device sluggish?" for quite some time.

Hey
Alright guys i got the phone perma rooted now, but i havent installed an OC kernel yet, two questions.
-Which kernal should i install if i want 1.4Ghz? there seems to be two threads with 1.4ghz kernels
-Do i need to install Bacon Bits for the kernel?

kcm117 said:
Alright guys i got the phone perma rooted now, but i havent installed an OC kernel yet, two questions.
-Which kernal should i install if i want 1.4Ghz? there seems to be two threads with 1.4ghz kernels
-Do i need to install Bacon Bits for the kernel?
Click to expand...
Click to collapse
just install cm6.1 and setCPU and you will be fine, then you can tweak it up to 1.42 if you like or whatever you want it at

Any heat related issues? Let's say I get into a zone and play some graphics intensive game 6 hours straight on USB power at 1.4Ghz? Wouldn't that put out more heat then the G2 was design to handle possibly shortening its life span?

convolution said:
Excuse me, since when does increasing the clockspeed of your CPU INCREASE battery life?!
Click to expand...
Click to collapse
It doesn't. However, overclocking is misnomer. What we really mean is over and UNDER clocking. For example with SetCPU is can create a profile that greatly slows down my CPU when the screen is off. This saves the battery a lot, since my screen is nearly always off.
Also, I can create profiles that slow down the CPU as the battery lowers in order to offset the fact that I overclock the CPU when the battery is fuller.

manvstech said:
Wouldn't that put out more heat then the G2 was design to handle possibly shortening its life span?
Click to expand...
Click to collapse
Probably could shorten the life span. I keep phones for a year or two, though, and shortened life span for me isn't an issue. The phone becomes outdated before the CPU gives up.

cparekh said:
It doesn't. However, overclocking is misnomer. What we really mean is over and UNDER clocking. For example with SetCPU is can create a profile that greatly slows down my CPU when the screen is off. This saves the battery a lot, since my screen is nearly always off.
Also, I can create profiles that slow down the CPU as the battery lowers in order to offset the fact that I overclock the CPU when the battery is fuller.
Click to expand...
Click to collapse
^This.
I've gone a full 10 hours with my battery still reporting 100%.
Sent from my HTC Vision using XDA App

my default sense rom does not feel sluggish at all.
this oc is not really required from my point of view. and it also does not increase battery. the thing what increased is the underclocking when screen is off.
and this you can do even without overclocking. and THEN it brings even more gain.

an example of "real world" for me is how well my g2 plays PSX games on the emulator. I have it overclocked at 1.5 on setcpu and it runs chrono cross pretty much flawlessly with no noticeable slow down.

i use setcpu for underclocking since i don't do enough just yet to overclock, i haven't noticed any battery increase just yet and i've been using it for a few days now. i almost questioned my self if i was losing battery life due to my system mhz always fluctuating? is this a possibility? i just added a profile for screen off 245/245 but i still had to choose on demand? what should i put there. thanks for ur help everyone

I installed the bacon bits 1.4ghz kernel and setup some setcpu profiles.....battery life is much better now.
Sent from my T-Mobile G2 using XDA App

screen off profile doesn't work with G2
noone has any proof it does change anything.
with or without widget running

Set cpu help/question

Ok so I have searched all over the forums and through google to find an answer to this and I can't any where so here goes. I am currently running the syndicate rom with the extreme kernal installed and when I go to use set cpu I have it set to conservative but any time I try to limit the cpu speed with the sliders it doesn't tae effect. The green numbers above the sliders will change stating my preferences but the white numbers that show the actual speed of the processor will continue to climb past my desired bottleneck. It looks like thecpu always stays between a range of 200 mhz and 1.2 ghz no matter what I set it at. If I change the style to something other than conservative it will change the behavior like performance will keep it at 1.2 or what I select and battery saver will keep it at the minimum. On demand and interactive seem to respond as well but are a little buggy and any little touch on the screen will make the processor jump straight to the maximum and stay there fr a bit which I would assume would kill my battery quite a bit faster. Does any one know if this is an issue with the phone, rom, kernal and if there is maybe a better settng than conservative or a different kernal I could use I was looking into the phoenix or fluff kernal. Any help or recomendations would begreatly appreciated. Thanks
Sent from my SPH-D700 using XDA App

Its been a long time since Ive used it (2.2.1 scales pretty good) if I remeber right,interactive is what you want to select,but on some kernels conservtive is what you want to select.I never used the profiles,I think they dont work all the time.

That's odd I never had that problem with syndicate. And I know for sure that almost every overclocking kernel recommends conservative, for some reason the other profiles can cause problems. There's a couple things that I've learned.
Conservative, for one thing, is never going to be an on demand setting. Typically it will just up the cpu to the max you set it at whenever there is some sort of activity on the phone. Which begs the question, what do you have the max set at? if its 1ghz, remember that the kernel is overclocked, so a setting of 1ghz will allow you to go to 1.2ghz. (I'm almost positive you don't want to set it at 1.2, because then it will peak higher than that) I think the max you set it to should be the listed physical limit of the processor (ours is 1ghz obviously), and the overclocking handles it from there (at least that's been my experience).
Also, remember that when there is no activity (your phones in your pocket), the cpu will be at your minimum. So you save battery in that regard, because with out setting cpu limits, like if you're running stock, I think it might run at the max all the time. (I don't that for a fact tho) again, we pretty much have to run conservative, (I've read its something to do with these hummingbirds and setcpu and overclock widget aren't built fot them) so its an all or nothing deal, you can't get "just enough" processor setting.
Try creating different conditions to help yourself out. When I had syndiccate I had a different setting for the screen being off, for being plugged in to a wall, for being plugged in to a computer, and for being below a certain battery %. Those are really cool features and help out a lot.
And as far as other roms...I use baked snack right now with his ultimate kernel. Its only sllliggghttly less stable than syndicate (but most most most defintly stable enough for a daily driver), and I get much better battery life and performance. He recommends using overclock widget, which isn't as flexible as setcpu, but defintly gets the job done. You'll have to google baked snack and find his website since they kicked him off of here.
Hope that helps, let me know if I didn't quite answer your question correctly.
Sent from my baked and emotionless SPH-D700

From my experience,you need to set it to 1.2 to activate OC...That being said,there are some kernels that need the interactive setting to work right...and 2.2.1 scales to the lowest setting when screen off even without setcpu,thats why I dont use it anymore.I will again once we have an official OC kernel for 2.2.1.
Sent from my SPH-D700 using XDA App

I actually used to have bakedsnacks rom and I liked it but it became a bit glitchy on me but I did think the battery life was a bit better. I only am using eclair as I want to wait for a final build of froyo to come out from sprint so the developers can utilize it better. I tried some of the leaked ones but I prefered the 2.1 better, all of the 2.2 ones were missing minor things that I used so I switched back. Also interactive setting just keeps the processor at max clock for a really long time before it scales back down and I didn't like that. Has anyone used the fluff ondemand kernal that is supposed to be for bettery battery life with syndicated 2.1? So I have deleted setcpu but it seemed to eat my battery faster so I put it back on. Maybe I will try some other kernal configurations since I was told that I can swap kernals without looseing data.
Sent from my SPH-D700 using XDA App

Fluff was glitchy for me,I liked Xtreme kernel the best.

Please share your voltage and governor

Please share
1. your favorite governor (do you use any different governor on different profiles?)
2. your voltage parameters
3. Your benchmark using quadrant
Thanks

No one wants to play?

Maybe like me, they have no idea what you are talking about
What is a governor?
What voltage do you mean?
My quadrant score is 3900 ish

Thanks for the reply, I don't think I'm good enough to explain but, in a nutshell,
A governor is a a piece of code in the kernel that decides on the cpu speed. each kernel has multiple governors
voltage is where you can decide what voltage is delivered to your cpu at certain frequency. undervoltage will usually help you save battery. we have to pay attention not to go too low or it phone will freeze
download setcpu it will all become clearer

I will give this another bump before letting it die

Even I would be intrested in sharing this
currently I am using CF root with ondemand and its working all good

FM kernel with interactive. I find my phone snappier with this governor. I liked it the most with smartassv2 on Abysssomething (don't remember now) kernel, but too many teething problems with this one, had to revert to FM. I'll give it another shot soon though.

pjm77 said:
FM kernel with interactive. I find my phone snappier with this governor. I liked it the most with smartassv2 on Abysssomething (don't remember now) kernel, but too many teething problems with this one, had to revert to FM. I'll give it another shot soon though.
Click to expand...
Click to collapse
Do you use any additional profiles with Interactive?

Nope, I like the way it is.

pjm77 said:
Nope, I like the way it is.
Click to expand...
Click to collapse
Have you tried InteractiveX? Or, better yet, know the differences between the two? I am currently using smartassv2, FM kernel and have no complaints but would be interested if there was something a bit snappier when opening an app (I still get a bit of lag if I quickly select an app after unlocking the phone).

Yes, I've tried InteractiveX and OndemandX - they're both absolute rubbish (at least from my point of view). Both responsiveness and benchmark results were dismal (2800-3300 quadrant advanced). These are governors for anally retentive battery life lovers. Nothing wrong with that itself but beats the purpose when buying state of the art top shelf performance smartphone IMO.

Good to know. I appreciate the advice. Does that mean you also tried smartassv2 with the FM kernel? Any discernible difference between that and interactive, if you have? And sorry for all the questions but it saves me the trouble of trying them!

I just flashed the 1.3 FM a moment ago. Now running 100-1704 smartassv2, haven't played with voltages yet. Responsiveness in terms of screen scolling, lags & stutters seems better than 200-1400 interactive. Performance in Quadrant Advanced and Nenamark2 seems a tiny bit worse (but I don't really care about that, I use benchmarks only to roughly estimate, smoothness is what I'm after). I can't give you direct sources because I don't remember, but having spent several hours digging last weekend I concluded that for people who put performance slighly over battery life governors to be considered are interactive, smartass(v2), savagedzed and performance. Funny enough - I'm getting consistently worse benchmarks on performance governor on all kernels. I wonder why?

Thanks again. I will play around with some of the governors and settings to find the right fit. I think I will try savagedzen next but I am pretty happy with smartassv2 and may just stick with it.

Handy explanation of most of the governor options available in custom Note kernels: http://forum.xda-developers.com/showthread.php?t=1369817
AND
http://forum.xda-developers.com/showthread.php?t=1242323

Smartassv2 and vr. After reading a bit about it they seem to be the best for performance and balanced battery life.

i share with you my SetCPU config, voltage ...
it's very stable for me. It's not performance oriented but battery friendly.
what you think ?
EDIT : I use AbyssNote Kernel 1.2

I'm getting nice results here on FM Kernel 1.3. 1704mHz (1375mV) - 100mHz (775mV), lulzactive governor. 5000-5872 in Quadrant advanced, 32-35 in Nenamark2. Battery life good with low to med usage, poor when playing games, running satnav etc. - hardly a surprise We'll see about stability but so far so good.

This thread is finally picking off ! thank you all
I am currently on FM 1.3 and preferring lulzactive
I don't use any over clocking I guess I don't dare. is it safe?
I think i'm pretty aggressive with under voltage i'm running 1175mv at 1400mhz and 775mv at 200mhz. For some reason my phone freezes any time I use the 100mhz no matter the voltage .
Can you share the whole voltage for a comparison ?
with all this I can hardly get a full day of use with my battery but I guess I'm a pretty heavy on usage. no gaming or anything extensive but wifi-browsing-emails-3g-bluetooth all day

ArcticCat said:
For some reason my phone freezes any time I use the 100mhz no matter the voltage .
Click to expand...
Click to collapse
I read on some other kernel thread that Samsung's implementation of the 100mhz step is incomplete/buggy. That's probably why it doesn't work properly.

[Q] setcpu and evo battery life

hi
i have a htc evo 4g running android 2.3.5 and kernel 2.6.35.10-g4b48446 [email protected] #1 and i have a few questions on setcpu. its a stock rom and it is rooted.
I shut off my profiles and disabled the perflock - it said success. So i ran the long bench test and only got 2078 ms, not 5000. so i dont know if its really working. I reengaged the profiles and i think it works with the screen off. the rest of the time i am not so sure. in fact it seems to still drain fairly rapidly unless i turn on some battery saver or something. I have the following settings on my profile all are set to ondemand except charging which is set to performance. the only other setting i can choose is user
in call 998 max and 245 min priority 91
screen off 384 max and 245 min priority 88
charging any 998 max and 245 min priority 85
battery <25% 460 max 245 min priority 81
bbattery <50% 883 max 245 min priority 65
Temp> 42 C 614 max 245 min priority 50
what am i doing wrong? I have it enabled and i have notifications off
i have system panel to try and monitor but its not recording and it also drains the battery like crazy so i think thats set wrong as well but i dont know why.
i also tried juice defender but it doesnt work right because it says the AOSP file isnt found in the system/app folder. I looked there and also in teh data/app folder and its not there. So i dont know what to do about that.
thanks

stock sense is just not all that efficient really. (well thats my opinion) profiles seem to look ok but also finding a different kernel with different governors (smartass v2 is rather efficient and changing around the frequencies as needed)
auto sync settings as well? turning some stuff of that you dont use or look at and so on can help too
and calibrating battery a bit can help aka a full discharge a full charge and full discharge will sure help (also what i have found personally)

kernels
thanks for the reply. You mentioned different kernels. I understand about rooting my phone but not so much about how to load a different kernel or different rom. Where do i go to learn about that?

jjdonohue said:
thanks for the reply. You mentioned different kernels. I understand about rooting my phone but not so much about how to load a different kernel or different rom. Where do i go to learn about that?
Click to expand...
Click to collapse
look around in the development section as there are some great kernels available right now...Ca1ne just released a new version of the underworld SBC v6 that i personally like with great battery life ...Mason kernels are also great with great battery...just make sure u read the threads completely to make sure u are using the right kernel for the rom u are using...ie there are kernels for ics...sense....and so on......also the kernels load through recovery...just load kernel to sd and wipe cashe and dalvik and flash zip...hope this helps...Carp

Hi another question about kernels. I am a bit of a newbie other than rooting my phone so i want to understand what advantages/disadvantages different kernels have. You mentioned smartassv2. i have seen others like
chopsuey kernal
freedom kernel
golden monkey kernel
savaged-zen kernel
tiamat kernel
all of these i think support sense roms.
as i understand it , you have to go into the recovery screen and load hte zip file off the sd card and reboot with the new kernel. What are the risks/rewards of doing so? I guess i am trying to understand which one would suit me best.
i have the current sprint lovers rom i guess since it is factory stock so should i also be considering changing the rom? Maybe i am getting ahead of myself here.
thank you again.

which rom are u wanting to run....this will help us steer u in the right direction
im sorry your entire post didnt load on my end i see ur running sprint stock....that is a fine rom but i have not ran it myself....
---------- Post added at 01:53 AM ---------- Previous post was at 01:36 AM ----------
i personally have switched to sbc kernels when they came out with a sense version...i am addicted to sense 3.5...just my personal likings...sbc is superior battery charging whichcarp will give u better full charge on your battery so when the light turns green and u unplug it it wont drop down to like 90% battery in just a few mins....i can squeeze another couple hours out of my battery with sbc and even more depending on light usage....but u will stil need to play around with different cpu speeds like 786..921 and so on to see what your individual evo can stand....what works for 1 may or will not work for another....lags and bootloops etc...

You don't need to change Roms, you can if you want, but changing kernels will unleash new features. Some features are:
Full hdmi mirroring
The ability to over/under clock CPU
2 way call recording
Improve battery charging
Enable swap space
Improved performance of phone
Some kernels allow under volting CPU to further save battery (this can cause some stability issues so start slow with undervolting)
You may want to take a look at Lionfish kernel also, just note first boot may take a while.
Also ditch the profiles in set CPU, I tried profiles and it never seemed to work right. A good governor will handle all your profile settings.
I like smartass, and intellidemand the most on my set up.
As an idea ok the battery life I am getting, I streamed Pandora over 3g for about 8 hours not much other phone use, screen off most of the time, and my phone was at like 20 %. I thought that was pretty good.
Sent from my Synergized Aggressive Lionfish Evo using the XDA app

thanks detcup4evr for helping out explaining that better...i blew out my back and between no sleep and pain meds the brain just dont want to fire...thanks for stepping in bro....carp

smartassV2 vs InteractiveX ... which one giver better performance AND battery life??? currently I am running LIONFISH 1.8 with interactive X

Using profiles in setcpu actually uses more battery life. Because it has to be running all the time and monitoring phone state to know when to change to a different profile.
interactiveX vs smartassv2 all depends on how you use the phone and really which kernel it is. I've noticed little things like on mason's I got better battery with smartassv2 but on other kernels I get better battery with interactiveX. As far as performance, you won't realize a difference.

ok so it sounds like i should try the sbc sense 3.5 kernel with the smartassv2 governor. Did i get that right? i will look around to see where i can download that.

Were you refering to this kernel?
Underworld Sense Kernel v0.6

yes this is the kernel i run with ODJDub HD Bliss!! Sense 3.5...if u choose to run this rom it will give u alot of different options of kernels and apps and other things from the installer....if i can help u more just feel glad to hit me up....carp

Ok so with lionfish 1.8 kernel and interactivex, I should not use a profile? What does CPU go to on screen off? also where does it mention profiles use battery? I'd like to read more into this..
Thanks
Sent from my PC36100 using Tapatalk 2

Sense rom with Underworld v 0.6
At Carp -
thank you for the advice. I was thinking maybe i would use my ROM still (its a sense i believe) and load the underworld v0.6 kernel with sbc and see how that goes. I havent done very much research on ROMs so i dont know that i want to get that deep into this just yet. It seems like underworld has alot of nice features. One thing that i am wonderig though is with the new kernel would have any further ability to unload some of the sprint bloatware or do i need a new rom to do that or is there another way to do it? Things like qik video , gmail, accuweather blockbuster etc all load themselves periodically. I kill them but then they come back like weeds. Even programs i do like , like pandora, wheres my droid etc come back also. But i dont want them to.

no u will be fine getting rid of apps and bloatware u dont wont...u wont need a special rom....i use a free app in the market called root uninstaller to get rid of useless bloatware,apps etc...then u can go in and manually uninstall what u don't want...be careful not to uninstall anything which the phone needs to boot and operate such as android system...you will see the things u are looking for when u load the app...hope this helps...carp

I actually did something unusual.
I have universal aggressive lionfish SBC 1.8, swagged out stock N, and smartassv2
I set the ideal, sleep, and wake freq for smartass v2 to 128, while setting the up rate to 245. I used set cpu to lower the min freq for my device to 128. I set max load to 100, and min load to 85, and down time to 0. I then set a profile for "ondemand" during screen off, of 128-384.
I actually have pretty awesome battery life (I'm an uber heavy user).
Sometimes it reads that I spend over 70% of my time at 128mhz.
I feel no lag. It clocks to 998mhz maybe 15% of the time, mainly when loading web pages.

flashed underworld v 0.6
Hi Carp,
well, i flashed the underworld v 0.6. So i see in set cpu that i can underclock to 128 and overclock to 1228. however, i slid the slider over to 1228 by accident and it froze the phone even though it says its still at 998 mhz. then it rebooted by itself. so i guess that wasnt a good idea. Anyway, theres a ton of governor choices now in the profiles section. i am not familiar with alot of them but i was wondering which of those would provide the most benefit. they are as follows -
ondemandx
interactive x
intellidemand
smartass
interactive
conservative
smartass 2v2
performance
along with ondemand and user space from before.
thanks

Good to hear....u will need to try different settings as each evo will be a little different...ie.. some can take alot of overclock and as u said when u went to high it locked up......my evo likes min 245 and i dont go very little over 998...mine does not like high overclock....i run between 768 and 998 or until i can see a lag or slow down in performance..depends on which rom i am running...i like ondemand x and smartass 2 on my evo but there is a good read in papa smurph's smurphed out v6.6 thread in development on governors and such...go to post #2....i wish there was a perfect setting i could give u but u will have to see what your evo can take...part of the fun of android.....carp

Governors
Thanks carp. I guess experimentation is the only way to know. i charged my phone last night ad i noticed that it does take alot longer to go from 100% charge to 90% but i also noticed that the phone temp was at like 110 deg F and a voltage around 4.263 or so. i have read some thread where they claim its bad for the Lithium ion batt to be over 4.2 V but as soon as i unplug it it drops to 4.1 something usually. I am using battery indicator app to measure it. i am using the underworld w/sbc kernal currently but the voltage being higher has me a bit concerned that i am damaging the battery kind of like pumping water into a jar with the the lid on tight til it bursts. Or in the batteries case - too hot i guess or until it plates.

Best GPU Govenor for any custom rom?

Can you guys give me the best GPU govenor for any kind of rom? thanks!

derking1 said:
Can you guys give me the best GPU govenor for any kind of rom? thanks!
Click to expand...
Click to collapse
That'll depend on what you need your phone for.
If you want all your cores to run at max speed thereby maximizing performance on games and browsing pick the performance kernel.
Otherwise for normal usage just pick the interactive governer.
There's a lot of governors available but these 2 are the only ones that are important and actually useful. Major kernel developers only give support to these 2 governors as they are the most useful when compared to others.
Dont use any battery saving governer. Trust me, your phone will slow down and make it unusable.
Hope this helps!

Best for what?
Governors are built into the kernel, so if you want choices, you'll have to flash a kernel that has those choices. Some are for high performance. Some are for saving battery. And then there's ones in between. Some might work better if you underclock or undervolt to save battery. Some might work better if you run only 2 cores. Some have better wake-up speed from sleep. "Best" depends on what you plan to do with your phone.
Don't forget about profiles either. For example, I've been playing around with HellsCore kernel and HellsCore Manager. You can create profiles depending on what you're doing. Like, if you're plugged in and playing a game, set it for max performance. If you need it to last as long as possible, limit the max clock speed, run only 2 cores, and use a battery saving governor. With HellsCore Manager you can even mix it up; Performance or normal until battery hits 50% (or whatever), and then switches to a battery saving profile. Pretty nifty.