Hey,
So I'm on the fence about perma rooting and over clocking my G2, but i have a few questions:
1) Will my battery life suffer greatly due to over clocking say to 1Ghz or 1.4Ghz?
2) Are there any real world noticeable real world performance gains besides benchmark scores?
3) Will perma-Rooting it decrease performance? (Back when i had the mytouch 3g, the phone never felt as snappy after i rooted and installed custom roms, as compared to stock).
Thanks
1) battery life is the same if not better when overclocked with setcpu in ondemand mode at 245/1100mhz
2) there is a definite performance increase
3) custom roms can decrease performance depending on the rom and ui (sense is a bit heavy). Just simply rooting will not decrease performance. Also, CM6.1 is super snappy, especially using Launcher42
DO IT!
Sent from my T-Mobile G2
thedarkpassenger said:
1) battery life is the same if not better when overclocked with setcpu in ondemand mode at 245/1100mhz
2) there is a definite performance increase
3) custom roms can decrease performance depending on the rom and ui (sense is a bit heavy). Just simply rooting will not decrease performance. Also, CM6.1 is super snappy, especially using Launcher42
DO IT!
Sent from my T-Mobile G2
Click to expand...
Click to collapse
Launcher42? that's a heck lot of upgrade from Launcher2 I'd like to check it out
but he's right overclocking is not going to eat up your battery much. Heavy graphic ROMs do however suck up battery and performance. I personally like to stick to rooted stock roms and tune up here and there to fit my personal needs.
You should however read carefully and make sure to understand every steps you're doing if you want to root your phone.
androidtoy09 said:
Launcher42? that's a heck lot of upgrade from Launcher2 I'd like to check it out
but he's right overclocking is not going to eat up your battery much. Heavy graphic ROMs do however suck up battery and performance. I personally like to stick to rooted stock roms and tune up here and there to fit my personal needs.
You should however read carefully and make sure to understand every steps you're doing if you want to root your phone.
Click to expand...
Click to collapse
thedarkpassenger said:
1) battery life is the same if not better when overclocked with setcpu in ondemand mode at 245/1100mhz
2) there is a definite performance increase
3) custom roms can decrease performance depending on the rom and ui (sense is a bit heavy). Just simply rooting will not decrease performance. Also, CM6.1 is super snappy, especially using Launcher42
DO IT!
Sent from my T-Mobile G2
Click to expand...
Click to collapse
Alright I'm going to give it a shot later tonight probably, i forgot about the SETCPU profiles where you can have the phone under clocked while the screen is off. That should definitely give me better battery life. Ill be back to post results
kcm117 said:
Alright I'm going to give it a shot later tonight probably, i forgot about the SETCPU profiles where you can have the phone under clocked while the screen is off. That should definitely give me better battery life. Ill be back to post results
Click to expand...
Click to collapse
Good luck and I'm sure you will enjoy your G2.
Oh, and don't forget to show it off to your friends. Let them see how this thing "Fly"
I oc to 1.4+ with setcpu and a few profiles set up i get much better bat life then stock. Im also running a sense rom which feels sluggish until you oc. At 1.4 it runs smooth as can be with live wallpapers plus all the pretty sense animations. The only problem i have is i hate the sense dialer and msg system also i want to change the "personalise" tab....do people really change theyre settings everyday that they need a dedicated button for it? Anyway i digress
Sent from my HTC Vision using XDA App
Excuse me, since when does increasing the clockspeed of your CPU INCREASE battery life?!
convolution said:
Excuse me, since when does increasing the clockspeed of your CPU INCREASE battery life?!
Click to expand...
Click to collapse
No, that's not entirely true BUT with SetCPU you can profile it with different mode which can benefit the battery life.
kcm117 said:
Hey,
So I'm on the fence about perma rooting and over clocking my G2, but i have a few questions:
1) Will my battery life suffer greatly due to over clocking say to 1Ghz or 1.4Ghz?
2) Are there any real world noticeable real world performance gains besides benchmark scores?
3) Will perma-Rooting it decrease performance? (Back when i had the mytouch 3g, the phone never felt as snappy after i rooted and installed custom roms, as compared to stock).
Thanks
Click to expand...
Click to collapse
I don't notice any difference in battery and I have the 1.9ghz kernel. I normally keep it at 1ghz though. I enjoy it overclocked. My games run incredibly smooth, when navigating my phone it literally almost feels like it knows what i'm pressing a split second before i do and benchmarks rape the face off anyone else I know with an android phone. It's just sooo smooth. It really boils down to being the kind of person who likes to hold a powerhouse of a phone in the palm of their hand. (Literally) with even just the 1.4ghz OC you'll never have to ask yourself "can my phone run this without being sluggish?" because the answer is yes, it can probably even run two or three instances of whatever made you question yourself in the first place without being sluggish. Any if you're worried about custom roms from the past, just remember how outdated your old android is compared to this one. No offense because I can relate, I used to have a G1 that is now a hand-me-down to my brother and whenever he asks me to mod something on it, I'm just amazed at how slow it is and really don't know how I tolerated it for the last 2 years. I mean I'd score a 150 quadrant on the G1 (on a good day) but with my full OC on, the G2 scores 3000~3100. That's roughly 20 times faster...
Bottom line is that you won't need to worry about "will this make my device sluggish?" for quite some time.
Hey
Alright guys i got the phone perma rooted now, but i havent installed an OC kernel yet, two questions.
-Which kernal should i install if i want 1.4Ghz? there seems to be two threads with 1.4ghz kernels
-Do i need to install Bacon Bits for the kernel?
kcm117 said:
Alright guys i got the phone perma rooted now, but i havent installed an OC kernel yet, two questions.
-Which kernal should i install if i want 1.4Ghz? there seems to be two threads with 1.4ghz kernels
-Do i need to install Bacon Bits for the kernel?
Click to expand...
Click to collapse
just install cm6.1 and setCPU and you will be fine, then you can tweak it up to 1.42 if you like or whatever you want it at
Any heat related issues? Let's say I get into a zone and play some graphics intensive game 6 hours straight on USB power at 1.4Ghz? Wouldn't that put out more heat then the G2 was design to handle possibly shortening its life span?
convolution said:
Excuse me, since when does increasing the clockspeed of your CPU INCREASE battery life?!
Click to expand...
Click to collapse
It doesn't. However, overclocking is misnomer. What we really mean is over and UNDER clocking. For example with SetCPU is can create a profile that greatly slows down my CPU when the screen is off. This saves the battery a lot, since my screen is nearly always off.
Also, I can create profiles that slow down the CPU as the battery lowers in order to offset the fact that I overclock the CPU when the battery is fuller.
manvstech said:
Wouldn't that put out more heat then the G2 was design to handle possibly shortening its life span?
Click to expand...
Click to collapse
Probably could shorten the life span. I keep phones for a year or two, though, and shortened life span for me isn't an issue. The phone becomes outdated before the CPU gives up.
cparekh said:
It doesn't. However, overclocking is misnomer. What we really mean is over and UNDER clocking. For example with SetCPU is can create a profile that greatly slows down my CPU when the screen is off. This saves the battery a lot, since my screen is nearly always off.
Also, I can create profiles that slow down the CPU as the battery lowers in order to offset the fact that I overclock the CPU when the battery is fuller.
Click to expand...
Click to collapse
^This.
I've gone a full 10 hours with my battery still reporting 100%.
Sent from my HTC Vision using XDA App
my default sense rom does not feel sluggish at all.
this oc is not really required from my point of view. and it also does not increase battery. the thing what increased is the underclocking when screen is off.
and this you can do even without overclocking. and THEN it brings even more gain.
an example of "real world" for me is how well my g2 plays PSX games on the emulator. I have it overclocked at 1.5 on setcpu and it runs chrono cross pretty much flawlessly with no noticeable slow down.
i use setcpu for underclocking since i don't do enough just yet to overclock, i haven't noticed any battery increase just yet and i've been using it for a few days now. i almost questioned my self if i was losing battery life due to my system mhz always fluctuating? is this a possibility? i just added a profile for screen off 245/245 but i still had to choose on demand? what should i put there. thanks for ur help everyone
I installed the bacon bits 1.4ghz kernel and setup some setcpu profiles.....battery life is much better now.
Sent from my T-Mobile G2 using XDA App
screen off profile doesn't work with G2
noone has any proof it does change anything.
with or without widget running
Related
Is there a point when overclocking becomes dangerous for our phones? Right now I'm at 1536 MHz max with 245MHz min, I'm kinda new to all of this stuff so I was just wondering if there are enough pros for overclocking that much, thanks
Sent from my Gingerbreaded HTC HD2 using XDA App
No offense to the chefs/devs around here who OC'd their ROMs, but *I* find it almost useless. Sure it gives me nice benchmark numbers, but so what? What's good are those benchmark numbers if it decreases my battery life, causes stutter/laggy UI, programs from running correctly, and to top it off, overheat the phone? It's a $900 investment and I'm not about to blow that over some number. Believe me, i overclock every computer that I've own (even my trusty eeepc 1000HE), but you get people here on a weekly basis posting questions (not you OP) saying that their phone is overheating or their battery drains fast...when they've been using a OC rom after all. Of course, there's an element of users beware and the chefs/devs made a note of that, but I think having a stable ROM trumps all. Often than not, running stable and running correctly is fast and seemless, almost no overclocking required. Hell, even if you underclock it, it's still fast and smooth.
/Just my 0.02cent
I only overclock when I need the extra fps or performance boost. Other than that I leave it underclocked.
Sent from my HTC HD2 using XDA App
Well ill start off by saying I'm new here and this is my first post. I'm also very new to this stuff and have a lot to learn. A buddy of mine recently rooted and overclocked my phone using the sense 2.6.32.21 1.5ghz oc/uv kernel. I currently have it set to 1.19 max 768 min and am experiencing temps above 107 running emulators and just web browsing.. I am also seeing pretty poor batt life even using battery booster and advanced task killer.. any help is greatly appreciated!
Battery apps and task killers tend to have the opposite of their intended effect on battery. Android has a built in utility to watch battery usage, why do you need a 3rd party one? Also do some reading on task killers, you will see why they are unnecessary on Android. I've stopped using one and my phone runs faster and more stable than before.
768 min is VERY high. Might explain the heating and battery life drain quite a bit.
Try this for me, please. Set your governor to interactive and drop your min down to 245. Run that for a whole charge. You may be surprised.
Sent from my PG06100
Also, I second the post above me. Advanced Task Killer and anything like it ultimately cause more harm than good. Battery apps, such as Juice Defender, also shouldn't be necessary. Although, it is YOUR phone.
Thanks a lot for the replys. I set the min to 245 and am seeing serious changes in temps. I also uninstalled atk but installed appkik. I am also still running battery booster but may get rid of it soon.. I feel like this phone should have better batt life. Any suggestions?
bearsblack said:
Thanks a lot for the replys. I set the min to 245 and am seeing serious changes in temps. I also uninstalled atk but installed appkik. I am also still running battery booster but may get rid of it soon.. I feel like this phone should have better batt life. Any suggestions?
Click to expand...
Click to collapse
well they gave some suggestions. which it seems you dont want to listen to. you dont need task killers of any kind
Sorry I'm stubborn. Uninstalling now
No disrespect here, but seriously, if you don't know what and why you're overclocking, don't know the inherent risks, etc, why are you doing it?
Compusmurf said:
No disrespect here, but seriously, if you don't know what and why you're overclocking, don't know the inherent risks, etc, why are you doing it?
Click to expand...
Click to collapse
because all the cool kids are doing it smurf...duh.
But seriously, min. should not be set at anything greater then 245. Only use performance if you are benchmarking. Default at the moment should be interactive.
Just gonna add my 2 cents in from personal observation....after doing some reading on overlooking and stuff I've noticed when going into the different ## modes, the shift usually drops its processor cycles to pretty low numbers in the 200-300 mhz range when its just in standby or not doing anything...it only kicks it up when you need the power. So the heating up is probably caused by constantly running at what used to be its max territory...PLUS youre going above and beyond the original limits/specs at a constant so it never gets to relax even when the phone is idle...I hope that makes sense. So as one poster mentioned keep the min at the stock setting and if you really want to/need to then raise the max mhz to whatever your phone can handle reliably. Correct me if I'm wrong anyone who is more into the overlooked setups. Me personally, stock has been able to keep up with whatever I have thrown at it after 30 days and still getting 25+hrs on one charge.
Sent from my PG06100 using XDA App
I currently have it governed at 245 max screen off. Running 1.2ghz max interactive with no task killers or batt savers. Batt life seems to be somewhat better but temps still creep past 105. Thanks a lot for the info
alittle off of the beaten path, but i tried runing 245/1801 interactive on evervolv and noticed alot of random reboots. set it back at on demand and am having good luck with that. why is everyone leaning towards interactive??
Excuse me if I am wrong it's early and im too lazy to reread up on it but I believe the difference is with on demand there is a slight delay(second or two) and it gradually kicks up to where it needs to be where is interactive is a spike the second you need it...
JAREDR said:
alittle off of the beaten path, but i tried runing 245/1801 interactive on evervolv and noticed alot of random reboots. set it back at on demand and am having good luck with that. why is everyone leaning towards interactive??
Click to expand...
Click to collapse
Interactive is, usually, a lot better for battery life.
If you look at your cpu's scaling history when on the two, TYPICALLY, you'll see a whole lot more time in higher frequencies using ondemand.
That's not to say, however, that with some devices and some kernels they will act the same.
Sent from my HTC Speedy
Can over clocking the phone can burn or cause damage to the hardware except excess battery usage and does overclock an 1ghz processor to 1.5 will really give a boost or its just a gimmick
Sent from my Desire HD using XDA App
Excessive overclocking really did damage your hardware, depends on the quality.. Overclocking from 1.0ghz to 1.5ghz really give a performance boost, in benchmarking.. In real life, only noticeable in process hungry apps, such as 3d games.. Gimmick? Well, if its a gimmick, it won't give any sudden resets or lock ups.. The processor have a safety switch if the temperature increase because of oc'ing.. If it's to hardcore, for example, 1.0Ghz to 1.8Ghz or even 2.0Ghz, for sure you processor will overheat and lock ups.
Well, mine running at 1.5Ghz, no lock ups or whatever..
SAPPH1RE said:
Excessive overclocking really did damage your hardware, depends on the quality.. Overclocking from 1.0ghz to 1.5ghz really give a performance boost, in benchmarking.. In real life, only noticeable in process hungry apps, such as 3d games.. Gimmick? Well, if its a gimmick, it won't give any sudden resets or lock ups.. The processor have a safety switch if the temperature increase because of oc'ing.. If it's to hardcore, for example, 1.0Ghz to 1.8Ghz or even 2.0Ghz, for sure you processor will overheat and lock ups.
Well, mine running at 1.5Ghz, no lock ups or whatever..
Click to expand...
Click to collapse
My phone is running quite happily on 1.84Ghz.No lock ups or overheating.
ttav said:
My phone is running quite happily on 1.84Ghz.No lock ups or overheating.
Click to expand...
Click to collapse
Good for you though.. Mine can only be stable at 1.7Ghz.. At 1.8Ghz, only about couple of mins gaming, and then hang till forever..
niks_5in said:
Can over clocking the phone can burn or cause damage to the hardware except excess battery usage and does overclock an 1ghz processor to 1.5 will really give a boost or its just a gimmick
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
You will barely notice the difference in most circumstances. Even if your phone runs fine at 1.5 or 1.8 ghz it will probably reduce the life of the chip over a prolonged period.
-----
Someone Swyped my idea.
I think it will give minor boost at the cost of burning your hardware
Sent from my Desire HD using XDA App
it will help in cpu intensive tasks, that which require lots of calculations, math stuff, 3d drawing done via cpu, faster cpu, better...
in other tasks, don't even bother, there are lots of other things far slower then cpu.
downside, heating, battery drain, increased rate of damage..!
Im using SetCPU for saving battery life. Set the cpu for 384 while screen is off. Noticed quite a difference.
OP, your asking if a overclocked cpu will give a better performance or if it's a gimmick? Really??
Of course it will give you better performance, that goes without saying but the question is, are you willing to sacrifice battery life? The chip will most probably last for years and years if overclocked but 1 thing that kills chips is heat and volts.
I only overclock when I need to and when I'm done I go back to how it was, usually.
My phone is fast enough at 1GHz, dont need overclocking, all games and apps goes fine fine
Most OC kernals are also undervolted anyway so I wouldn't worry about it
to be honest, i use mine with "underclocked" at 800mhz, trying to get at least a half-hour of battery life... i don't see the point in overclock a 1ghz processor, imo, even with a speed gain, the bad side effects easily override the good ones...
i truly believe that overclock my old milestone was the main cause of the problem that happens after...
thiagodark said:
to be honest, i use mine with "underclocked" at 800mhz, trying to get at least a half-hour of battery life... i don't see the point in overclock a 1ghz processor, imo, even with a speed gain, the bad side effects easily override the good ones...
i truly believe that overclock my old milestone was the main cause of the problem that happens after...
Click to expand...
Click to collapse
I'd look at other reasons for your battery life, if it's really that bad.
I'm running at just a touch above 1GHz with no side affects what so ever and get 24+hrs with heavy use, 30+hrs with moderate use and 40+hrs with light use, and that's never turning wifi / 3G off unless I'm in bed when I switch to 2G.
At 1GHz the OCUV kernal I have installed uses less voltage than stock kernal at stock speeds so in theory it's actually safer.
It's not that bad, but it's not so great as yours too. I got about 16hrs with 'hard' use, what is enought most time, but sometimes i get in home with the blinking orange led. Quite annoying...
I try my best to improve the battery life, but i was becoming a battery freak, or something like that, always checking currentwidget...
I get 3 or 4ma at stand by, what is considered normal, i guess... and always use full brightness, hate to use anything bellow...
Sent from my Desire HD using XDA App
thiagodark said:
It's not that bad, but it's not so great as yours too. I got about 16hrs with 'hard' use, what is enought most time, but sometimes i get in home with the blinking orange led. Quite annoying...
I try my best to improve the battery life, but i was becoming a battery freak, or something like that, always checking currentwidget...
I get 3 or 4ma at stand by, what is considered normal, i guess... and always use full brightness, hate to use anything bellow...
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Full brightness is your problem. I bet it uses like 70% of the current while you use your phone.
going up to 1.8GHz still running stable, thats crazy man!
smurcoch said:
Full brightness is your problem. I bet it uses like 70% of the current while you use your phone.
Click to expand...
Click to collapse
Yep, you are correct, it's using about 75% of the battery...
Sent from my Desire HD using XDA App
Any performance boost on 1.8 ghz
Sent from my Desire HD using XDA App
Hey there, I just a few days ago rooted and flashed the Syndicate Frozen rom and am not getting such good battery life...
I was wondering how big of a difference SetCpu makes on battery life/performance in general? With moderate/heavy use (internet browsing, facebook, email, txt messaging) how much should it improve battery life? am getting around 10hours at the moment with moderately light use... Is there any free alternative app that runs comparatively well?
I guess what I'm really asking is: is it worth it to buy setcpu, and will it make a dramatic difference on my battery life? This Rom is supposed to improve battery life, and I think I read is overclocked to 1.2... Will setcpu let me set this underclocked to 1,0 and then like 800 with screen off, 600 idle? Am new to the android thing [have had my EPIC only around 2 weeks today]
Thanks for any help!
Overclock widget does pretty much the same thing, and you're going to want to set something like
20mhz min 1 or 1.2ghz max
Then 100mhz min 400mhz max for screen off.
You can set the speed to.anything you want. If you want battery to be the best then.set it to 100/1000 on demand. If you emwant performance then 100/1200. Also I don't set profiles cause I was reading somewhere that they aren't good to use on any galaxy phone.
Sent From My Evo Killer!
http://www.setcpu.com/
Nice info read up on it and yes you can set it anyway you want like stated above. I bought mine from the market to support the dev for the hard work involved in making setcpu, dont know if you know but it is free for xda members just search for setcpu. It is only $2.00 well worth the price so please support the dev if you can.
063_XOBX said:
Overclock widget does pretty much the same thing, and you're going to want to set something like
20mhz min 1 or 1.2ghz max
Then 100mhz min 400mhz max for screen off.
Click to expand...
Click to collapse
20Mhz would freeze the phone. :O
I personally like running it @ 100 Mhz when screen is off and 1Ghz when screen is on.
Overstew said:
20Mhz would freeze the phone. :O.......
Click to expand...
Click to collapse
I am pretty sure XOBX meant 200, cause your right 20 is pretty much crawling...
Yep, I meant 200, the damn autocorrect kept changing mhz to Hz and I must've clicked backspace one too many times.
Thanks, so it would make a big difference in battery life?
Sent from my EPIC 4G FROZEN and Syndicated
androikid said:
Thanks, so it would make a big difference in battery life?
Sent from my EPIC 4G FROZEN and Syndicated
Click to expand...
Click to collapse
Don't expect it to magically give you another 4 hours up time. 1 extra hour would be high hopes.
I use SetCPU with the CPU set to 200/1000 and ondemand, and the battery life has improved GREATLY, well worth the $2 to support the Dev, IMO, even though XDA members get it free.
I've abandoned SetCPU and uninstalled it. Unnecessary consumption of system resources.
Same with any other user-space app/widget to control CPU speed scaling.
In the Bonsai ROM, the exact same capability, sans the profiles which I (and most people) don't use anyway, can be achieved by setting clock range and governor in /etc/init.d/24-cpufreq script. I expect that all the other OC kernels, if not every custom kernel, has a similar way to set CPU clock governor.
I have mine set to 100/1200 on demand, and it works well for the demands I put on it. Way low consumption at idle, but when I need something it instantly responds.
I routinely get 16-18 hours off the charger, and put it back on the charger with sometimes as much as 40% remaining, but as always YMMV. A lot of it has to do with the ROM, but I'd say that CPU scaling has realized a tangible gain for me.
dwallersv said:
I've abandoned SetCPU and uninstalled it. Unnecessary consumption of system resources.
Same with any other user-space app/widget to control CPU speed scaling.
In the Bonsai ROM, the exact same capability, sans the profiles which I (and most people) don't use anyway, can be achieved by setting clock range and governor in /etc/init.d/24-cpufreq script. I expect that all the other OC kernels, if not every custom kernel, has a similar way to set CPU clock governor.
Click to expand...
Click to collapse
Talking about Bonsai ROM tweaks on a Syndicate thread would be like me talking about BMW mods on a Honda forum. Either way, I looked around in the system folders and I can't find the 24-cpu file you're talking about. I upgraded yestereday from the 2.1 SyndicateROM to this, and for the first few hours, the ROM itself was definately quicker...I don't know if that's just because I came from 2.1 to 2.2, not to mention all the other 2.2 tweaks. After a few hours, I completely forgot that I could overclock this to 1.2Ghz. Installing SetCPU and bumping it to 1.2Ghz felt like just another jump. System resource consumption aside, it makes the phone all that much quicker while going between screen, apps list, closing apps, etc.
I could care less about battery life because I've learned to always have a charger around me since my days of the Moment, of hell, even my Treo's. I want fast, SetCPU is something I can see the difference in just from turning it on and off and seeing the differences.
OK for those that boast supreme bat life and performance please share your "EXACT" setup for set CPU, rom, kernel etc. Pretty please.
btucker2003 said:
OK for those that boast supreme bat life and performance please share your "EXACT" setup for set CPU, rom, kernel etc. Pretty please.
Click to expand...
Click to collapse
I'm guessing you're looking to underclock your CPU right?
Because "supreme bat life" and overclocking in the same sentence is an oxymoron.
The best thing I did was uninstall setcpu and let the custom kernel work,
Sent from my Nexus S 4G using xda premium
Currently running Taboonay 2.1b with rtrip's custom kernel 3.4 - it had issues with setcpu so I uninstalled it and am letting the kernel do it's thing - OC'd t 1.4 and it's smooth and fast but still has a decent battery life despite running a bunch of stuff, games, music, email and navigation - wifi on always...
Standby is about 3.5 days / on constantly about 7.5 hour life, so..yeah...Me likey..
YMMV
kjy2010 said:
I'm guessing you're looking to underclock your CPU right?
Because "supreme bat life" and overclocking in the same sentence is an oxymoron.
Click to expand...
Click to collapse
LOL, I was wondering the same thing about "boast supreme bat life and performance". This reminded me of my days of tuning cars and we we used to say "Fast, cheap, and reliable. You can have 2 of the 3."
OP, all machines won't react exactly the same way and people use their tablets for difference purposes, so having others post exactly what they have setup probably isn't the best way to go. First, you need to find a kernel that works and is stable for everything you need. Kernels are changing all the time, sometimes they move two steps forward and 1 step back before they are stable again and support everything a user needs (docking, NTFS mount, cifs, 3G etc.). After you find a kernel that is stable and suits your needs using the defaults, then you can take it a step further if you wish.
If you want a performance minded setup, setup a profile (in setcpu or one of the others) using the desired clock speed. Try 1.4 or 1.5 Ghz to start as that seems to work for most. Use the governor recommended by the kernel developer for best results. The more you over-clock, the more battery you will consume.
If things are stable with the default voltages, then experiment with under-volting to get the best battery life you can for your performance profile. Start with the recommended voltages with your kernel and adjust down -10uV at your max CPU frequency to find out how much voltage you can reduce and still have a stable system. Make sure you run through all the things you typically do and give it a good workout before moving down to another voltage. Using benchmarks can be helpful for finding stability, but may not match how you use the tablet in the real world.
If you want the best battery life, then experiment with under-clocking to 912MHz and then try under-volting that clock speed to find your stable point. You could then setup a setup "battery mizer" profile for that.
If this sounds too difficult and time consuming for you, then do as the others have stated and just install a custom kernel that does what you need and let it work for you. It should give you a good "in-between" setup. For me, I am addicted to 1.5GHz as the increased smoothness from stock is very noticeable for me. I can recharge every night after 6 hrs or so, so this works great for me. If I go on the road and need to take it easy on the battery, I use another profile to get better battery life for the time being.
Hope this helps you out.
kjy2010 said:
I'm guessing you're looking to underclock your CPU right?
Because "supreme bat life" and overclocking in the same sentence is an oxymoron.
Click to expand...
Click to collapse
_motley said:
LOL, I was wondering the same thing about "boast supreme bat life and performance". This reminded me of my days of tuning cars and we we used to say "Fast, cheap, and reliable. You can have 2 of the 3."
OP, all machines won't react exactly the same way and people use their tablets for difference purposes, so having others post exactly what they have setup probably isn't the best way to go. First, you need to find a kernel that works and is stable for everything you need. Kernels are changing all the time, sometimes they move two steps forward and 1 step back before they are stable again and support everything a user needs (docking, NTFS mount, cifs, 3G etc.). After you find a kernel that is stable and suits your needs using the defaults, then you can take it a step further if you wish.
If you want a performance minded setup, setup a profile (in setcpu or one of the others) using the desired clock speed. Try 1.4 or 1.5 Ghz to start as that seems to work for most. Use the governor recommended by the kernel developer for best results. The more you over-clock, the more battery you will consume.
If things are stable with the default voltages, then experiment with under-volting to get the best battery life you can for your performance profile. Start with the recommended voltages with your kernel and adjust down -10uV at your max CPU frequency to find out how much voltage you can reduce and still have a stable system. Make sure you run through all the things you typically do and give it a good workout before moving down to another voltage. Using benchmarks can be helpful for finding stability, but may not match how you use the tablet in the real world.
If you want the best battery life, then experiment with under-clocking to 912MHz and then try under-volting that clock speed to find your stable point. You could then setup a setup "battery mizer" profile for that.
If this sounds too difficult and time consuming for you, then do as the others have stated and just install a custom kernel that does what you need and let it work for you. It should give you a good "in-between" setup. For me, I am addicted to 1.5GHz as the increased smoothness from stock is very noticeable for me. I can recharge every night after 6 hrs or so, so this works great for me. If I go on the road and need to take it easy on the battery, I use another profile to get better battery life for the time being.
Hope this helps you out.
Click to expand...
Click to collapse
Hah! Well thanks but I'm pretty sure I didn't say "overclocking" but gotcha thanks for the feedback and answers. I was merely looking for setups compared to what I'm running now. TIA