[Q] cab sending error, please help - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

hello,
after flashing yuki/xboxmod back to the future v2 rom i hard reset the phone (after 123456 gogogo ) and updated through zune as far as zune went (7392 nodo).
now i wanted to send cab files. followed all instructions, but when i pressed S (or B, no difference in results) i got the following error:
Error: Retrieving the com class factory for component with CLSID <77CB935D-D0CC4249-86433C387A514A27> failed due to the following error: 80040154.
Call stack:
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager .Iinitialize<>
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager .get_Instance<>
at wm7update.Program.Main<String[] args>
does anybody know how to solve this problem?
i tried it on a windows vista x64 system, starting the cab sender as both admin and not.
i did do a hard reset after installing nodo 7392. this did not solve the problem.
deviceprovisioning.cab is in the cab sender folder. i did not unpack this.
hope anyone of you can help me fix this problem. thanks in advance
jronimo

If you are at 7392 then you shouldn't need to send cabs to get to official Mango, Zune should offer an update.
You can try to force an update using http://www.wpcentral.com/force-mang...ne-software?utm_source=wpc&utm_medium=twitter. Please report back your findings.

Related

RUU Update Utility Error 200. Help. Thank you

I have a HTC Cingular 8525 with WM6.1, I was doing an upgrade to WM6.5 and I do not want to display the PPC WM6.5 and not acerita the installation of another ROM. Anybody know how to sde can insert another ROM, but would have tried the following warning appears:
(200) ERROR: INVALID UPDATE TOOL
Please get newer update utility.
Has lost the device?

[q] tool version dosent match !!! Hd2

hi all
tried to find answer myself but couldnt find anything related my problem is ive flashed the new xboxmod + yuki wp7 rom (7004) done every thing to letter it gets two updates from zune to (7392) then i tried to send cab files and it fails with this massage " installed version of zunewmdu <4.8.2345.0> dosent match tool version <4.8.2134.0>
now zune tries to update to mango beta 7403 and fails with error code 80180005
any help would be great plus im not a developer i just eat what the chefs here provide so i not sure what u need to know from me plus if this has been solved elsewhere sorry and pls point me to it
many thanks in advance
cmully said:
hi all
tried to find answer myself but couldnt find anything related my problem is ive flashed the new xboxmod + yuki wp7 rom (7004) done every thing to letter it gets two updates from zune to (7392) then i tried to send cab files and it fails with this massage " installed version of zunewmdu <4.8.2345.0> dosent match tool version <4.8.2134.0>
now zune tries to update to mango beta 7403 and fails with error code 80180005
any help would be great plus im not a developer i just eat what the chefs here provide so i not sure what u need to know from me plus if this has been solved elsewhere sorry and pls point me to it
many thanks in advance
Click to expand...
Click to collapse
in the cab sender, there should be 3 folders, one of them says if needed, install this tool. try installing that (there is 1 32bit and 1 64bit so just install the one for your system). also make sure the cab sender app stays in the same folder as those 3 folders. so in the WP7 Cab sender folder (or whatever the main folder is called)you have:
FOLDER: if needed install this tool
FOLDER: logs
FOLDER: tools
and the WP7 Update Cab Sender.bat file
thanks gonna TRY NOW ill report back
hi
just tried again and it returned a new message (as below) am i missing something.
and y does it want to update me to 7403 isnt it supossed to update to 7220 first as zune already updated me to 7392 ????
thanks again
Error:
Update device 7938612c - b493e145 - 90cfab34 - dc9e259e Complete with error code
: 80180011, error message: IU (Image Update) installation failed on phone: None
of the packages in the update are applicable.
■
╚══════» Done
Press any key to continue . . .
thought id cracked it tried to install mango rtm cabs and this come back if this is any help
think i might start again if so do i need to task 29 or can i just re flash the rom
Name: HTC HD2
KITLName: QSD8XXX07185665
Manufacturer: HTC
ModelId: 1
Model: HD2
MobileOperator: 000-00
Version: 07.00.07392.03-00.00.00000.00-00.00.00000.00
Error:
Update device 7938612c - b493e145 - 90cfab34 - dc9e259e Complete with error code
: 80180005, error message: IU (Image Update) installation failed: The update pac
kage isn't a valid CAB file.
■
╚══════» Done
Press any key to continue . . .

th damn zune 800B010A error

BTTF 7200 with sp1, old HTC drivers for Touch explorer.
I have tried all suggestions in :
http://www.1800pocketpc.com/htc-hd2-mango-update-fails-with-error-800b010a/23301/
http://forum.xda-developers.com/showthread.php?t=1283466
http://forum.xda-developers.com/showthread.php?t=1281902
rebooted computer and phone more than 10 times, took out sim card, updated computer device driver. tried on different PCs. damn, the weird error code just persisted.
why couldn't those stupid Zune developers add more descriptive error message for troubleshooting? pulling my hair.
any other suggestions? is there a update cab sender cab for this ISV Beta Cleanup update?
jessezx said:
BTTF 7200 with sp1, old HTC drivers for Touch explorer.
I have tried all suggestions in :
http://www.1800pocketpc.com/htc-hd2-mango-update-fails-with-error-800b010a/23301/
http://forum.xda-developers.com/showthread.php?t=1283466
http://forum.xda-developers.com/showthread.php?t=1281902
rebooted computer and phone more than 10 times, took out sim card, updated computer device driver. tried on different PCs. damn, the weird error code just persisted.
why couldn't those stupid Zune developers add more descriptive error message for troubleshooting? pulling my hair.
any other suggestions? is there a update cab sender cab for this ISV Beta Cleanup update?
Click to expand...
Click to collapse
Hi there, I think you will have more chances to find a solution if you post in the HD2 Windows 7 section. THis is the Android side of the force

[Q] Dell Venue Pro; Update failed, recover not successfull

Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx
If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300
THX!
I will try ... downloading ...
So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...
I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(
Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.
YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415
so it´s over ... i send the phone back ...
Thank u very much 4 helping.

[Q] Updating WP7

Sorry for reposting this, but I really need an answer. I think I have downloaded all the necessary files to update my phone, all I need to know now is how to work the cab sender. Is there a video on this or is there an easy solution? I tried updating via Zune, but it freezes my HD2 and makes me reflash. I am on version 7004. I want to be able to use the marketplace and I already activated my phone. Help???
L4zyBear said:
Sorry for reposting this, but I really need an answer. I think I have downloaded all the necessary files to update my phone, all I need to know now is how to work the cab sender. Is there a video on this or is there an easy solution? I tried updating via Zune, but it freezes my HD2 and makes me reflash. I am on version 7004. I want to be able to use the marketplace and I already activated my phone. Help???
Click to expand...
Click to collapse
use this to flash all the way to 8107...just execute the first .bat file. do not exit the cab sender after part 1 is complete...press any key to complete to 8107. it's the 7004 to 8107 autoinstaller you want. do not reset phone. go straight into sending sp1..see below.
http://xboxmod.sylvester20007.com/CABS/OSBUILD.CAB/
then use cab sender to flash sp1 by itself using the regular cab sender you downloaded. place the sp1 cab file in the same directory as the .bat file. hard reset phone after sp1.
cab sender grabs whatever cabs you place into its directory to send. be sure to delete the cab(s) after sending before sending another cab. you can send multiple cabs per run. again, be sure to delete cabs already sent before another run.
╔══════» Creating list of cabs
■
■
╠══════» Updating device
■
UpdateWP version 4.8.2345.0
Error: Retrieving the COM class factory for component with CLSID {77CB935D-D0CC-
4249-8643-3C387A514A27} failed due to the following error: 80040154.
Call stack:
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.Initialize()
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.get_Instance()
at wm7update.Program.Main(String[] args)
■
╚══════» Done
Press any key to continue . . .
Any Ideas? Solved the problem thanks for your help!

Categories

Resources