Database Users

Certificate-issues when attempting to install on QTEK 9100

I've recieved a QTEK9100 (HTC Wizard) from my employer. The ROM-version is 2.18.7.4 NOR.
This unit seems to be application locked in some way.
Among other things, I have tried to install two different sharewhare GPS-programs on this unit (PTGMAP and OZIExplorer). When installing or running the .exe files i get error messages like:
- "Cannot open the file PTGMAP. It either lacks a signed certificate or cannot find one of the components" (my translation).
- ".. can not be installed because it does not have a digitally signed certificate" (also my translation)
- or simply "cannot be installed"
I've searched this forum and quite a few others, but I have not been able to find a solution. I've found some .cab files, but these have been for other units that the QTEK 9100/HTC Wizard. I was even able to install this one, but it seems to have made no difference:
ftp://[email protected]/Universal/Extended_ROMs/Default_Signed_DisableSecurity.CAB
(I do realise this is for another unit)
I've also tried SignCode - It's says that the executable is certified, but I still get the same error message when I try to run the programe.
Finally, because my ROM has been configured (by an external supplier) with Pylon Anywhere for syncronization, I guess I can't install another ROM, as I will lose this software which I need.
Can anyone help me here? --- Please!?! ---

Try this reg tweak
Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM\Security\Policies\Policies\0000101a = 0 (DWORD decimal)

Registry editor
but... I've tried to install the registry wizard:
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
But I get the same error-message "cannot install RegistryWizard_PPC_ARMV4.cab"..
Any ideas?

Copy this exe to your device via activesync and click on file through file explorer. It is a registry editor and go to those keys i described.

Still doesn't work
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!

Re: Still doesn't work
kloksa said:
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Click to expand...
Click to collapse
Try the above file in main memory - take your storage card out and soft reset. Then click on the file again - sometimes it is a corrupt storage card that causes that error. Otherwise its some software thats caused this security error and you will need to hard reset or update rom. Yes you would have to reinstall all your software.

Unsuccessful instalation of .Net Framework cf 3.5

Hello
I have a problem with installation .NET framework. I can t install it because the blackstone wrote the installation was unsuccessful.
Please help

I had the same error. Problem solved after a hard reset.
So if you don't have too much programs installed...

once you installed it on your pc go to
C:\Program Files\Microsoft.NET\SDK\CompactFramework\v3.5\WindowsCE
there you will find some cabs for wm!
install: NETCFv35.wm.armv4i.cab

are you trying to install it on your storage card ?

thanks umexed. its working.

mascot4m said:
thanks umexed. its working.
Click to expand...
Click to collapse
came across the same problem a few days ago glad i helped!

To get it installed on mine I just had to run the setup on my PC, then I plugged in my HD and it updated the device on its own

Sorry, i'm a big noob - it's my first wm phone, so i think it's better to ask then to sc**w something up....
I can't start .msi file on the phone because it says the file is not associated with any prog on the phone. If I install this on my pc and copy just NETCFv35.wm.armv4i.cab (if i understood correct) on HD - after i click on it twice it will install?

denied1977 said:
Sorry, i'm a big noob - it's my first wm phone, so i think it's better to ask then to sc**w something up....
I can't start .msi file on the phone because it says the file is not associated with any prog on the phone. If I install this on my pc and copy just NETCFv35.wm.armv4i.cab (if i understood correct) on HD - after i click on it twice it will install?
Click to expand...
Click to collapse
Installations of .exe and .msi are for pc.. if you run them on the pc it'll automatically send it for installation to the ppc via activesync.
if the installation isnt successful for some reason, copy the .cab file mentionted on the previous post and run it from the ppc

Thanks, it worked!!!

I get "Installation error" aswell, but is there any other to to get around this other than doing a hard reset?

anyone have any ideas?

Bennyboy1985 said:
I get "Installation error" aswell, but is there any other to to get around this other than doing a hard reset?
Click to expand...
Click to collapse
No luck, I am still looking.....

Same problem, it won't install.
I 1st installed the MSI, then tried to install the app via Active Sync. No errors, but it just doesn't install.
Then tried copying the CAB file to my phone and running it. It simply won't start on my mobile, again no errors...
Any help would be welcomed

Well, I got it to work. When I soft-reset my mobile, it asked if I wanted to install it, and I did, and it works. Kinda weird/stupid it doesn't initially say you need to reboot to install...

Error msg while installing Mocrosoft Net Framework 35
Hi guys,
I have this problem with my HD. Been using this device without any problem since Sept 08. My problem is I can't install Net Framework on my device.
I've tried to install from the device.
It indicates installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 2.
Done the said but still the same.
Any Help Pls
This is the log I've found
Installation folder is: '\Windows'.
05/07/2009 12:38:23: Build 3.5.7283.00
05/07/2009 12:38:23: Opened CF registry key OK.
05/07/2009 12:38:23: Looking for upgradeable installations for version '3.5.7283.00'
05/07/2009 12:38:23: Got version value '3.5.7283.00'
05/07/2009 12:38:24: Upgradeable installation '3.5.7283.00' detected.
05/07/2009 12:38:24: Record '3.5.7283.00' deleted.
05/07/2009 12:38:24: Got version value '2.0.7045.00'
05/07/2009 12:38:24: Side by side version '2.0.7045.00' found and skipped.
05/07/2009 12:38:24: CF registry key closed.
05/07/2009 12:38:24: Delete GAC list file: failure (E:00000002)
07/05/2009 04:38:24: CGACUTIL: Initializing
07/05/2009 04:38:24: \Windows\mscoree3_5.dll
07/05/2009 04:38:25: CGACUTIL: Initialized
07/05/2009 04:38:25: CGACUTIL: Done
07/05/2009 04:38:25: CGACUTIL: Exiting
05/07/2009 12:38:25: Run: '\Windows\cgacutil.exe /o "Microsoft .NET CF 3.5.LOG.TXT" /silent /refresh ', error code: 0 (00000000), exit code: -1 (FFFFFFFF)
05/07/2009 12:38:25: Refreshed GAC.
05/07/2009 12:38:35: Entered Uninstall_Exit()
Can anyone decipher cos I'm a nooob here
Thanks

there is registry hack
this is from tutorial by geistteufel
install ".NET Compact 3.5", because by default on official first rom (I have the 1.14), it come with ".NET Compact 2.0" which is know to be slower than the "3.5" version.
So, go there : Microsoft .NET Compact 3.5
Install it on your phone (Internal of course, not Storage card)
After, install TCMD or any registry tools to change registry value
TCMD Web Site
Open it, go to "\\Registry\HKLM\Software\Microsoft\.NETCompactFra mework"
You have 2 entry :
2.0.7045.00
and
3.5.7283.00
So edit the 2.0, change value from "1" to "0"
and edit the 3.5, change value from "0" to "1"
Ok, now .NETCompact 3.5 is the default one.
Thank geistteufel for this if it worked properly

I installed orginally by active syc
I installed by active sync method worked like a charm for me once i did the hack
if you are trying to install by cab then close tf3d and install from windows today's page and see, use task manager to close all programs it is a large cab 33 mb
pls check the registry once more to see if it has installed

thnx for ur work umexed

[Q] cab sending error, please help

hello,
after flashing yuki/xboxmod back to the future v2 rom i hard reset the phone (after 123456 gogogo ) and updated through zune as far as zune went (7392 nodo).
now i wanted to send cab files. followed all instructions, but when i pressed S (or B, no difference in results) i got the following error:
Error: Retrieving the com class factory for component with CLSID <77CB935D-D0CC4249-86433C387A514A27> failed due to the following error: 80040154.
Call stack:
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager .Iinitialize<>
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager .get_Instance<>
at wm7update.Program.Main<String[] args>
does anybody know how to solve this problem?
i tried it on a windows vista x64 system, starting the cab sender as both admin and not.
i did do a hard reset after installing nodo 7392. this did not solve the problem.
deviceprovisioning.cab is in the cab sender folder. i did not unpack this.
hope anyone of you can help me fix this problem. thanks in advance
jronimo

If you are at 7392 then you shouldn't need to send cabs to get to official Mango, Zune should offer an update.
You can try to force an update using http://www.wpcentral.com/force-mang...ne-software?utm_source=wpc&utm_medium=twitter. Please report back your findings.

[q] tool version dosent match !!! Hd2

hi all
tried to find answer myself but couldnt find anything related my problem is ive flashed the new xboxmod + yuki wp7 rom (7004) done every thing to letter it gets two updates from zune to (7392) then i tried to send cab files and it fails with this massage " installed version of zunewmdu <4.8.2345.0> dosent match tool version <4.8.2134.0>
now zune tries to update to mango beta 7403 and fails with error code 80180005
any help would be great plus im not a developer i just eat what the chefs here provide so i not sure what u need to know from me plus if this has been solved elsewhere sorry and pls point me to it
many thanks in advance

cmully said:
hi all
tried to find answer myself but couldnt find anything related my problem is ive flashed the new xboxmod + yuki wp7 rom (7004) done every thing to letter it gets two updates from zune to (7392) then i tried to send cab files and it fails with this massage " installed version of zunewmdu <4.8.2345.0> dosent match tool version <4.8.2134.0>
now zune tries to update to mango beta 7403 and fails with error code 80180005
any help would be great plus im not a developer i just eat what the chefs here provide so i not sure what u need to know from me plus if this has been solved elsewhere sorry and pls point me to it
many thanks in advance
Click to expand...
Click to collapse
in the cab sender, there should be 3 folders, one of them says if needed, install this tool. try installing that (there is 1 32bit and 1 64bit so just install the one for your system). also make sure the cab sender app stays in the same folder as those 3 folders. so in the WP7 Cab sender folder (or whatever the main folder is called)you have:
FOLDER: if needed install this tool
FOLDER: logs
FOLDER: tools
and the WP7 Update Cab Sender.bat file

thanks gonna TRY NOW ill report back

hi
just tried again and it returned a new message (as below) am i missing something.
and y does it want to update me to 7403 isnt it supossed to update to 7220 first as zune already updated me to 7392 ????
thanks again
Error:
Update device 7938612c - b493e145 - 90cfab34 - dc9e259e Complete with error code
: 80180011, error message: IU (Image Update) installation failed on phone: None
of the packages in the update are applicable.
■
╚══════» Done
Press any key to continue . . .

thought id cracked it tried to install mango rtm cabs and this come back if this is any help
think i might start again if so do i need to task 29 or can i just re flash the rom
Name: HTC HD2
KITLName: QSD8XXX07185665
Manufacturer: HTC
ModelId: 1
Model: HD2
MobileOperator: 000-00
Version: 07.00.07392.03-00.00.00000.00-00.00.00000.00
Error:
Update device 7938612c - b493e145 - 90cfab34 - dc9e259e Complete with error code
: 80180005, error message: IU (Image Update) installation failed: The update pac
kage isn't a valid CAB file.
■
╚══════» Done
Press any key to continue . . .

[Q] Dell Venue Pro; Update failed, recover not successfull

Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx

If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300

THX!
I will try ... downloading ...

So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...

I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(

Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.

YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415

so it´s over ... i send the phone back ...
Thank u very much 4 helping.