Database Users

[Q] Dell Venue Pro; Update failed, recover not successfull

Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx

If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300

THX!
I will try ... downloading ...

So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...

I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(

Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.

YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415

so it´s over ... i send the phone back ...
Thank u very much 4 helping.

[Q] Updating WP7

Sorry for reposting this, but I really need an answer. I think I have downloaded all the necessary files to update my phone, all I need to know now is how to work the cab sender. Is there a video on this or is there an easy solution? I tried updating via Zune, but it freezes my HD2 and makes me reflash. I am on version 7004. I want to be able to use the marketplace and I already activated my phone. Help???

L4zyBear said:
Sorry for reposting this, but I really need an answer. I think I have downloaded all the necessary files to update my phone, all I need to know now is how to work the cab sender. Is there a video on this or is there an easy solution? I tried updating via Zune, but it freezes my HD2 and makes me reflash. I am on version 7004. I want to be able to use the marketplace and I already activated my phone. Help???
Click to expand...
Click to collapse
use this to flash all the way to 8107...just execute the first .bat file. do not exit the cab sender after part 1 is complete...press any key to complete to 8107. it's the 7004 to 8107 autoinstaller you want. do not reset phone. go straight into sending sp1..see below.
http://xboxmod.sylvester20007.com/CABS/OSBUILD.CAB/
then use cab sender to flash sp1 by itself using the regular cab sender you downloaded. place the sp1 cab file in the same directory as the .bat file. hard reset phone after sp1.
cab sender grabs whatever cabs you place into its directory to send. be sure to delete the cab(s) after sending before sending another cab. you can send multiple cabs per run. again, be sure to delete cabs already sent before another run.

╔══════» Creating list of cabs
■
■
╠══════» Updating device
■
UpdateWP version 4.8.2345.0
Error: Retrieving the COM class factory for component with CLSID {77CB935D-D0CC-
4249-8643-3C387A514A27} failed due to the following error: 80040154.
Call stack:
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.Initialize()
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.get_Instance()
at wm7update.Program.Main(String[] args)
■
╚══════» Done
Press any key to continue . . .
Any Ideas? Solved the problem thanks for your help!

[Q] HTC HD2: WP 7.8 cellular data problem

I flashed "2_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8858.136 RMT v8.7" ROM and than I get a cellular data connection problem: the configuration is good, when I tried to load a internet page, the loader bar seems in progress but it stops at a certain point and nothing happened... Can someone help me understanding what's wrong? Thank you.

send cab file fix... is many times written in Pdaimatejam ROM topic...
http://forum.xda-developers.com/showpost.php?p=35489458&postcount=6348

dxdy said:
send cab file fix... is many times written in Pdaimatejam ROM topic...
http://forum.xda-developers.com/showpost.php?p=35489458&postcount=6348
Click to expand...
Click to collapse
Thanks, how can I send it? I haven't read about it (too many pages) ... Hope this will solve the problem

read tutorial (from my signature or download from pdaimatejam)...

dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
Ok, now everything's is fine! Thank you! :fingers-crossed:

problem with cab sender
dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
Hello!
I would like to ask your help!
I have a problem with internet connection, mail sync and etc. what is using mobile internet (cellular data connection).
I tried to use the cab sender as described in the tutorial but, I get this error message in the dos promt window when I want to select the "send cabs to device" function.
error message: 'CHOICE' is not recognized as an internal or external command, operable program or batch file
Thanks in advance!
Regards: Gyula

For XP you must use http://xboxmod.sylvester20007.com/TOOLS/wp7_cabsender_winxpfix.rar

dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
I use the XPcabfixer but I have another problem, I have a guess but I am not sure what should be the problem.
Please help me a little more
error code: 800B010A
error message: A certificate chain could not be built to a trusted root authority
Thanks

send files
gianniJ said:
Thanks, how can I send it? I haven't read about it (too many pages) ... Hope this will solve the problem
Click to expand...
Click to collapse
to send the files to the device using cab sender i have to start the phone with volume down+start button?????

radukw said:
to send the files to the device using cab sender i have to start the phone with volume down+start button?????
Click to expand...
Click to collapse
no... phone must be turned ON and connected via USB... Zune must be closed... all is described in install tutorial...

HD2 windows 7.8 DTF
Hi can any one Please help me ive followed all the video steps from juicyboose's tutorial ive got as far as the DFt install i click next and next again but it comes up with these errors
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
PLEASE HELP

did you set magldr options before flash WP7?
read install tutorial from my signature

Thank you
dxdy said:
did you set magldr options before flash WP7?
read install tutorial from my signature
Click to expand...
Click to collapse
I didnt set magldr flash, how do u do that.... please
i just followed the tutorial like for like .. in the same time ... but the last inbstall failed comimg up with that error message
please help ,..

did you set USELAST24NAND?

zune
dxdy said:
no... phone must be turned ON and connected via USB... Zune must be closed... all is described in install tutorial...
Click to expand...
Click to collapse
sorry for asking but i bought the htc hd 2 one week ago,so am i a begginer. what is is zune?i read the tutorial for cab sender.zune is the last problem,i hope.

zune is PC application for sync media files and update WP devices... "must have tool" if you have WP...
also all recommended tools and apps for WP and PC is written in install tutorial... this you must have if you want use WP... all links for download is there also
also is recommended to have Windows 7 or 8... with Windows XP you can something but if you want use WP and all potential is recommended to have Win 7 or 8

it worked!
dxdy said:
zune is PC application for sync media files and update WP devices... "must have tool" if you have WP...
also all recommended tools and apps for WP and PC is written in install tutorial... this you must have if you want use WP... all links for download is there also
also is recommended to have Windows 7 or 8... with Windows XP you can something but if you want use WP and all potential is recommended to have Win 7 or 8
Click to expand...
Click to collapse
thanks a lot! i had some problems with my laptop and i couldn't send the files to my phone but today i resolved and data connection works

800705B4 problem
When I run CABsender.bat or wCabSender, update of any CAB always fails due error 800705B4 : timeout/not enough space.
Computer sends CAB to the phone and then phone reboots. After reboot phone stays black for 30 secs, than it shows "connect USB" image and after that it reboots. WP7 says that update was unsuccessful, CAB sender reports error 800705B4.
Code:
Setting the installing update state.
Error during update: Function: UpdateMain::ReadConfig, Line: 242, Hr: 0x800705b4, GetLastError: 0
Error during update: Function: UpdateMain::Init, Line: 143, Hr: 0x800705b4, GetLastError: 0
Error during update: Function: UpdateMain::StartUpdate, Line: 1216, Hr: 0x800705b4, GetLastError: 0
Update failed. hr = 0x800705b4
Update Application - Completed Post Update @ 00:02:09
Update Application - Returning 0x800705b4
Unable to unset simulation mode
Attempting to clear the 'installing IU' update state
succeeded
Clearing the persistent update flag.
succeeded
I have 4GB SD card and phone recognizes it fine. I tried to reflash phone ROM without SD-card, CAB sending has same problem. Although most of the phone and live services work fine, many programs like "Leo advanced", "Program manager", "Connection setup" do not launch.

[Q] Update Unsuccessful When Using CAB Sender

I have attempted to install the 8862 Update via CAB sender on Yuki's ROM and Dynamics 8852 and after installing the update the script shows "Restarting Phone" and the HD2 boots into WP7 and says that the update was failed, I have seen a few sucess stories on this, what could be the problem? (Windows 7 x64, HD2 Dynamics ROM, any other info you need just ask!)
Error:
Update device 05f33ccd - 2cb7d1fb - 5284bf4a - 280015f4 Complete with error code
: 80070070, error message: There is not enough space on the disk.

[Q] 80180048 error while updating (phone version : 7.10.8779.3)

Hi,
My phone is an Omnia 7 branded SFR.
I have also another Omnia 7 that I have updated with success to 7.8 using Seven-Eighter.
For a few month, I have an update that I can't install on my SFR Omnia 7 which is named "Samsung update" on Zune.
Every time, I get 80180048 error (I tried from different computers, tried to free some space on the phone, nothing helps).
So I decided to try with Seven-Eighter but I got the same error.
Finally, I read this post (http://forum.xda-developers.com/showpost.php?p=37384687&postcount=1478), and some page in the same thread but you're always talking about 7.10.8779.8. My version is 7.10.8779.3. I was not able to find any update from 7.10.8779.3 to 7.10.8779.8, am I missing something ?
If I try to deploy the cab for 7.10.8779.8 I get error 80180011 (package not applicable) for the OS, and 80180015 for the language files.
Any idea ?
Thank you in advance

Actually, I realized that my phone is refered as 7.10.8779.8 in Settings/About, but referred as 07.010.08779.03 when using UpdateWP.exe.
However, I still have my update problem.
I tried to reinstall all packages for 7.10.8779.8, some languages were installed, but when I try to deploy 7.10.8783.12 I still get my 80180048 error

I have Nokia Lumia 800 and having the same problem described above.
A help in this regard will be greatly appreciated.
Thanks