hello,
here I have a problem with the touch of my legend!
I will explain:
Last night I was bored I decided to disassemble my story legend to clean of the sudden I also remove the touch screen! after I start pumping, the mobile works well on touch and everything works! the problem is that after about ten minutes the Touch does not work anymore! I did a reboot and make sure it works but klk minute after the problem becomes: (!
you think it's a software prob: I am under Cyanogen 7.1.0RC
or hardware prob! that are not properly align a panel with the screen can cause this kind of prob knowing that when the tile work is not precise shifting at least that's what I think!
a thank you for helping me solve my prob I count on you guys!
help please
You dissassembled it and afterwards occurs a touch screen issue ... What do you personally think: hardware- or software-problem?
Related
Hi
I have and XDA11 which has been work fine until today.
I was finding my XDA just freezing so Isoft and hard reset and when it came back on the screen would not work.
Has any one else had this problem and was it easy to fix.
Any advise welcome.
Thanks in advance
Solution
Just to let every one know I solved the problem with my touch screen.
Solution: let both the main and back-up battery run down the reconnect to cradle and charge as is new.
Hope this help all the people with the same problem
what exactly was your problem with your screen? Cos I am having a problem with the touch screen - no matter where i touch it it thinks I am touching it on the far right of the screen, (I can only scroll)...
is this the same problem?
Dead Touch Screen
My problem was when I touched my screen (which looked fine-) I got no response at all the whole screen seemed dead.
Solution was to let the XDA11i back-up battery run down-then completely. I then reconnect to cradle and recharge.
This worked for me.
hi. my touchscreen stopped working suddently i tried soft-resetting and that didnt work so i did a hard-reset hoping that would fix the problem but it only made it worse bacuse now i cant even pass the first screen where windows ask you to touch the screen to set up the device so my question is has anyone had any similar problems? how did you fix it? how can i get pass the first screen without touching the screen? is this software related or hardware? i didnt dropped the phone it was a bit dirty but the screen just stopped working without any reasons.
btw i didnt have any aligment issues before like other people have exerienced. thanks for any help you can provide
SOLVED
i found the answer. Remote Screen Alignment software its a wonderful tool and its free. google it to find the program and if you are having issues with your screen aligment i think its worth the try.
I have my Jade about 4 months and everything works perfectly until today.When i try to select something on the screen the phone selects items above or under my selection. When i restart my phone (even hard restart 2 times, aligning the screen countless times) for a first 5 minutes everything is OK but later its coming back (the same issue)
Please someone help.Any solutoin???
EDIT: I flashed the phone with newest HTC rom.The phone now reacts better but sometimes the issue with the screen happens again.Not that often as before.Anyone????
If the screen looses his adjustment very often you have to think for an hardware-defect.
I think it's a hardware problem. I experienced that before, not HTC though but O2. Changed the screen.. wallla. Better utilise your warranty clause now.
only need to change the touch pad layer not the whole screen which can b extremly costly
Thanks guys i think its the only one solution, i take it to the htc store for repair under warranty period.Thanks again.
How about re-calibrating the screen? Have you tried that?
Joe
jfranek said:
How about re-calibrating the screen? Have you tried that?
Joe
Click to expand...
Click to collapse
I think he did several times ("aligning" is supposed to mean "calibrating" in #1, I presume).
Hi everyone. I bought my jade 5 days ago. at first it was running smoothly until the touchflo suddenly failed to launch. will somebody help me fix the problem? thanks in advance
dokdelvo said:
Hi everyone. I bought my jade 5 days ago. at first it was running smoothly until the touchflo suddenly failed to launch. will somebody help me fix the problem? thanks in advance
Click to expand...
Click to collapse
Only to make it clear: The program "TouchFlo" = user interface does not launch - so what do you see exactly (normal home-screen?)? Or do you mean that the touch function of the screen does not work?
After I installed new rom on my blackstone a new problem came out...
Time to time something hapens to my touch screen. It gets very very imprecise. For example, when I'm writing a SMS message I press the "V" button but then "G" is written on the screen... But this doesn't happen just when I'm writing a SMS but it happens no matter what I'm doing with the phone... Everything seems to be "shifted"/moved for about 1 centimetre upwards.
I made a hard reset and reinstalled rom but nothing didn't helped...
But it's funny because this isn't happening all the time but just time to time. Then I recalibrate the screen (voUp and voDO + tap the screen) and it helps for a few moments and than the same problem again. Then I'm doing the recalibration procedure till this problem vanish...
What is the problem, how can I solve it???
Please help because it is really annoying...
Hi,
May be that the change of Rom is only a coincidence?
It is not excluded that the touch screen of your blackstone can be a little damaged.
I have a pda that sometimes have the same problem, but I not updated any Rom to it.
Simply I stressed his touch screen with some abnormal pressure (I think).
thanks for reply...
It's funny because it works fine all day but suddenly you need to write a SMS or just answer the call, but that is not possible.
Well the screen might been damaged but it's weird because when I start calibrating the screen I tap the cross and it's not moved...
What can I do?
Same problem
I have same problem and I didn't make any ROM update. I didn't install any new software, but suddenly my screen started to be unaccurate and shifted somehow. calibration helps but after while it's shifted again. I was thinking about updating ROM, but if this is not a solution, then I don't want to ...
Well I send my phone to repair. They said that it was a mechanical issue so I think you should send it also due it looks like this is the only way to solve this problem. I hope you still have your phone under guarantee...
Oh and make sure whether you need original ROM or you may use the changed one, because in Slovenia you need stock ROM and no programs installed (like Garmin etc.). So the best think to do is to hard reset the phone and then send it to repair, so you don't have any problems...
hi there just got a g1 and the touchscreen stoped working and when i go to the dailer it dose not work i wont to reload the os on the phone to see if it will fix my problem can any body help
Just re-flashing ROM, and it will fix this issue. So did I.
Remenber wipe it first. No other way.
hi how do i do that and were do i get the rom from
I was thinking of wiping/reflashing my g1. It has excess screen bouncing. touching bottom of the screen will result in it responding in the center of the screen. Im almost to the point of buying a knew screen and or digitizer. I have thought about wiping/reflashing like i said. but i check the rom thats on it and its the most update cyanagon mod.
thanks in advance,
Lord CraiguS