hi. my touchscreen stopped working suddently i tried soft-resetting and that didnt work so i did a hard-reset hoping that would fix the problem but it only made it worse bacuse now i cant even pass the first screen where windows ask you to touch the screen to set up the device so my question is has anyone had any similar problems? how did you fix it? how can i get pass the first screen without touching the screen? is this software related or hardware? i didnt dropped the phone it was a bit dirty but the screen just stopped working without any reasons.
btw i didnt have any aligment issues before like other people have exerienced. thanks for any help you can provide
SOLVED
i found the answer. Remote Screen Alignment software its a wonderful tool and its free. google it to find the program and if you are having issues with your screen aligment i think its worth the try.
Related
Hi
I have and XDA11 which has been work fine until today.
I was finding my XDA just freezing so Isoft and hard reset and when it came back on the screen would not work.
Has any one else had this problem and was it easy to fix.
Any advise welcome.
Thanks in advance
Solution
Just to let every one know I solved the problem with my touch screen.
Solution: let both the main and back-up battery run down the reconnect to cradle and charge as is new.
Hope this help all the people with the same problem
what exactly was your problem with your screen? Cos I am having a problem with the touch screen - no matter where i touch it it thinks I am touching it on the far right of the screen, (I can only scroll)...
is this the same problem?
Dead Touch Screen
My problem was when I touched my screen (which looked fine-) I got no response at all the whole screen seemed dead.
Solution was to let the XDA11i back-up battery run down-then completely. I then reconnect to cradle and recharge.
This worked for me.
Please Help! The touchscreen on my WING stopped responding but everything else functioned well, so I kept on using it with the hardware buttons. I was still keen to sort out the root problem and one of the suggestions I got from this forum was to do a hard reset.
After the hard reset, the touchscreen is still not responding, but the phone prompts me to align the screen, I have failed to get past this as it requires the use of the touchscreen. I would rather still use my WING without the touchscreen as where I am located its almost impossible to get a replacement screen which I now believe is the permanent solution.
Is there any way that I can bypass the align screen so I can at least still use the phone?
The same thing happened to me once, and I had to return it and get a new one from Tmo
Thanks David, but am in Africa and it was sent it to me as gift. I don't have many options available apart from this forum..
oh no! Well, that sucks man. I don't know what to tell you.
The touch screen alignment on my Diamond occasionally gets misaligned and inadvertently aligns itself without warning. When I tap in one place, it registers in another. It is a really big nuisance especially in circumstances where I need to quickly input data into the PPC.
I was hoping that somebody had a solution for this?
odell said:
The touch screen alignment on my Diamond occasionally gets misaligned and inadvertently aligns itself without warning. When I tap in one place, it registers in another. It is a really big nuisance especially in circumstances where I need to quickly input data into the PPC.
I was hoping that somebody had a solution for this?
Click to expand...
Click to collapse
have u tried realign???
I had that problem on my 2nd Diamond. Tried different version of ROMs but the problem still there, so I returned it and get a new one. My first one had a problem of self-restarting. Finally, now I'm happy my third Diamond
So ask if you can get a replacement, otherwise send it for repair.
Probably worth mentioning. I had a similar problem and it was driving me mad.
I was about to return the device for service, then I discovered it was a result of installing the GSen screen rotation program. I'd installed it to try it a few weeks ago and forgotten about it.
It turned out it that was switching the digitiser orientation without rotating the screen.
Uninstalled GSen and it's all fine now.
I'm hoping that uninstalling GSen will do the trick. Will give it a try tonight.
GSen was uninstalled and the problem still exists. Does anyone know if there is a firmware upgrade that handles this problem?
Have the same problem...
The touchscreen decalibrates itself.
2 minutes after calibrating it changes everything again. And just randomly.
Seems to be a hardware mistake, because even a hard reset didn't bring any help.
Anybody a solution?
Greetz
Hi I'm using HTC P3450 (Elf01000).. Everything was fine till yesterday.
Now i have the Cube working for me but the screen doesn't respond to stylus. I'm able to activate and deavtivate cube... thats it. Nothing else works...
Please help me
murali509 said:
Hi I'm using HTC P3450 (Elf01000).. Everything was fine till yesterday.
Now i have the Cube working for me but the screen doesn't respond to stylus. I'm able to activate and deavtivate cube... thats it. Nothing else works...
Please help me
Click to expand...
Click to collapse
Have you tried a soft reset?
Have you tried realigning the screen?
What have you done to your device recently? Flashed any new Roms?, Installed any apps? Played with registry? If anyone is going to be able to help you, you have to give us some information. What ROM are you using?
Hi Thanks for the reply..
I had tried aligning the screen and it got stuck there.
After a bit of googling, I was able to get past the align screen using Remote screen align, but my screen stopped responding to screen taps. Strangely I don't have any problem activating and rotating the cube.
I'm using the original Rom..
RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship
My phone is just lying useless now... other than recieving calls, couldn't do anything.
Please let me know if u need more info
You didn't answer all of the questions from my last post. If you hadn't done anything to your device and all it did was suddenly stop responding, perhaps your screen is faulty now and needs replacing. I don't know what else it would be personally, but feel that I may not have enough experience to be able to help you further.
hello,
here I have a problem with the touch of my legend!
I will explain:
Last night I was bored I decided to disassemble my story legend to clean of the sudden I also remove the touch screen! after I start pumping, the mobile works well on touch and everything works! the problem is that after about ten minutes the Touch does not work anymore! I did a reboot and make sure it works but klk minute after the problem becomes: (!
you think it's a software prob: I am under Cyanogen 7.1.0RC
or hardware prob! that are not properly align a panel with the screen can cause this kind of prob knowing that when the tile work is not precise shifting at least that's what I think!
a thank you for helping me solve my prob I count on you guys!
help please
You dissassembled it and afterwards occurs a touch screen issue ... What do you personally think: hardware- or software-problem?