[Q] goggle g1 touchscreen not working - G1 General

hi there just got a g1 and the touchscreen stoped working and when i go to the dailer it dose not work i wont to reload the os on the phone to see if it will fix my problem can any body help

Just re-flashing ROM, and it will fix this issue. So did I.
Remenber wipe it first. No other way.

hi how do i do that and were do i get the rom from

I was thinking of wiping/reflashing my g1. It has excess screen bouncing. touching bottom of the screen will result in it responding in the center of the screen. Im almost to the point of buying a knew screen and or digitizer. I have thought about wiping/reflashing like i said. but i check the rom thats on it and its the most update cyanagon mod.
thanks in advance,
Lord CraiguS

Related

Any way I can bypass the Align Screen startup??

Please Help! The touchscreen on my WING stopped responding but everything else functioned well, so I kept on using it with the hardware buttons. I was still keen to sort out the root problem and one of the suggestions I got from this forum was to do a hard reset.
After the hard reset, the touchscreen is still not responding, but the phone prompts me to align the screen, I have failed to get past this as it requires the use of the touchscreen. I would rather still use my WING without the touchscreen as where I am located its almost impossible to get a replacement screen which I now believe is the permanent solution.
Is there any way that I can bypass the align screen so I can at least still use the phone?
The same thing happened to me once, and I had to return it and get a new one from Tmo
Thanks David, but am in Africa and it was sent it to me as gift. I don't have many options available apart from this forum..
oh no! Well, that sucks man. I don't know what to tell you.

touch screen problem - calibration

After I installed new rom on my blackstone a new problem came out...
Time to time something hapens to my touch screen. It gets very very imprecise. For example, when I'm writing a SMS message I press the "V" button but then "G" is written on the screen... But this doesn't happen just when I'm writing a SMS but it happens no matter what I'm doing with the phone... Everything seems to be "shifted"/moved for about 1 centimetre upwards.
I made a hard reset and reinstalled rom but nothing didn't helped...
But it's funny because this isn't happening all the time but just time to time. Then I recalibrate the screen (voUp and voDO + tap the screen) and it helps for a few moments and than the same problem again. Then I'm doing the recalibration procedure till this problem vanish...
What is the problem, how can I solve it???
Please help because it is really annoying...
Hi,
May be that the change of Rom is only a coincidence?
It is not excluded that the touch screen of your blackstone can be a little damaged.
I have a pda that sometimes have the same problem, but I not updated any Rom to it.
Simply I stressed his touch screen with some abnormal pressure (I think).
thanks for reply...
It's funny because it works fine all day but suddenly you need to write a SMS or just answer the call, but that is not possible.
Well the screen might been damaged but it's weird because when I start calibrating the screen I tap the cross and it's not moved...
What can I do?
Same problem
I have same problem and I didn't make any ROM update. I didn't install any new software, but suddenly my screen started to be unaccurate and shifted somehow. calibration helps but after while it's shifted again. I was thinking about updating ROM, but if this is not a solution, then I don't want to ...
Well I send my phone to repair. They said that it was a mechanical issue so I think you should send it also due it looks like this is the only way to solve this problem. I hope you still have your phone under guarantee...
Oh and make sure whether you need original ROM or you may use the changed one, because in Slovenia you need stock ROM and no programs installed (like Garmin etc.). So the best think to do is to hard reset the phone and then send it to repair, so you don't have any problems...

[Q] my touch screen not acting properly

please can anybody tel me what could be the reason tha my touch screen is not working.. i hav htc touch hd.
it sometimes works and some times doesnt.
thnx
Touch hd screen not responding to touch or stylus
Touch hd screen not responding to touch or stylus
--------------------------------------------------------------------------------
In early February I upgraded my Touch HD to 6.5 from 6.1 and if am right it was energy.blackstone.21891.leo_Max. It worked for about two week and and then one day I struggled to get a gps fix on my tomtom. The next day the screen just froze with no response of any touching or stylus.
Managed to put the original orange rom back on it but could not cariberate the screen due to its not responding. I sent the phone to HTC UK for repairs but they said due to my having used unauthorised software the motherboard needs to be replaced and they were asking me to pay 168 pounds so they could go ahead with the repairs. I got the HD2 on a new contract.
Still love the TOUCH HD and was wondering is there another way of breathing life into this thing. Responds well to install new roms but the screen continues to remain frozen
Hello.
I have same kind of Problem.
My HTC had broken Screen, I had it repaired.
After it came back the touchscreen worked OK. Than I flashed it with the ENERGY Blackstone ROM.
Flashing etc was OK. Device started again and came to the Point where you have to tip on the screen to do the SETUP. But that did not work. I tried Softreset. Hardreset but No change of Problem.
Send it back to the repairshop and after I recevied it again the Energy was still on it and working.
Since a new ENERGY rom was out, I flashed it again . Result, Same Error, NOT working. To make sure that the ENERGY-ROM wasn't the error, I reflashed it with the Original HTC ROM.
Also this one does not work. It also comes to the point where I need to tap to do the Setup. Nothing happes.
When I attach the Phone to PC with ACTIVESYNCH, the Synchronisation works OK.
Any Help Any Idea ??
Probably you need to replace digitizer(touch screen layer, not LCD) Look on ebay for a new one.
Rigdzondorje said:
Hello.
I have same kind of Problem.
My HTC had broken Screen, I had it repaired.
After it came back the touchscreen worked OK. Than I flashed it with the ENERGY Blackstone ROM.
Flashing etc was OK. Device started again and came to the Point where you have to tip on the screen to do the SETUP. But that did not work. I tried Softreset. Hardreset but No change of Problem.
Send it back to the repairshop and after I recevied it again the Energy was still on it and working.
Since a new ENERGY rom was out, I flashed it again . Result, Same Error, NOT working. To make sure that the ENERGY-ROM wasn't the error, I reflashed it with the Original HTC ROM.
Also this one does not work. It also comes to the point where I need to tap to do the Setup. Nothing happes.
When I attach the Phone to PC with ACTIVESYNCH, the Synchronisation works OK.
Any Help Any Idea ??
Click to expand...
Click to collapse
Damn, I have almost the same problem!
I have used Energy roms for a year, without any major problem. I have installed dec. 20. NRG rom, and today it is completely messed up my HD. No response on touching the screen or pressing any button. After a hard reset the touchscreen alignment was came up, and the touchscreen is working, but I can't align the screen, it starts over and over again... and thats all. I cant do anything else with it. I have reflashed stock rom and spl, still the same.
mchaals said:
Damn, I have almost the same problem!
I have used Energy roms for a year, without any major problem. I have installed dec. 20. NRG rom, and today it is completely messed up my HD. No response on touching the screen or pressing any button. After a hard reset the touchscreen alignment was came up, and the touchscreen is working, but I can't align the screen, it starts over and over again... and thats all. I cant do anything else with it. I have reflashed stock rom and spl, still the same.
Click to expand...
Click to collapse
same with me here... I also have got an EnergyRom installed. For more then one day now I get no response from the touchscreen. Everything else seems to work properly, e.g. the popups which remind me appointments are there.
Exactly the same here!
I installed energy sense last week, phone worked fine for 4 days then i came to use it and it didnt respond to the touch screen, however tapping the screen would bring back on the backlight?
I hard resetted it and also flashed a new ROM on, still the same, I found that it was responding but taking up to 5 mins to respond, i.e if you tap the first calibration point, after about 3 minutes the point moves, however calibration never completes.
I think the phone is scrap.
retsam88 said:
Probably you need to replace digitizer(touch screen layer, not LCD) Look on ebay for a new one.
Click to expand...
Click to collapse
Yeah, this is digitizer problem.
Check my post

problem with the touch of my legend!

hello,
here I have a problem with the touch of my legend!
I will explain:
Last night I was bored I decided to disassemble my story legend to clean of the sudden I also remove the touch screen! after I start pumping, the mobile works well on touch and everything works! the problem is that after about ten minutes the Touch does not work anymore! I did a reboot and make sure it works but klk minute after the problem becomes: (!
you think it's a software prob: I am under Cyanogen 7.1.0RC
or hardware prob! that are not properly align a panel with the screen can cause this kind of prob knowing that when the tile work is not precise shifting at least that's what I think!
a thank you for helping me solve my prob I count on you guys!
help please
You dissassembled it and afterwards occurs a touch screen issue ... What do you personally think: hardware- or software-problem?

[Q] Touchscreen problem

Hi,
i have a problem with the milestone 2 of my wife.
Part of the screen is not working, a half-circle, starting from "settings" button to th "home" button.
All that's left is working. And i don't think it's hardware related, because there is schratches or damages on the screen.
I have installed the EngleMars's kitkat rom wich work great; but problem is still here.
I have tested three rom, the issue remain.
Has anyone encounter this problem or a similar one, or is there any hope of recovering the screen?
ThePsilopat said:
Hi,
i have a problem with the milestone 2 of my wife.
Part of the screen is not working, a half-circle, starting from "settings" button to th "home" button.
All that's left is working. And i don't think it's hardware related, because there is schratches or damages on the screen.
I have installed the EngleMars's kitkat rom wich work great; but problem is still here.
I have tested three rom, the issue remain.
Has anyone encounter this problem or a similar one, or is there any hope of recovering the screen?
Click to expand...
Click to collapse
It looks like dying digitizer(touch screen). I had a same problem on Milestone 1. Sometimes it help when you put your phone to a sack of rice so that it will suck moisture. But eventually you will need to replace it.
---UFO--- said:
It looks like dying digitizer(touch screen). I had a same problem on Milestone 1. Sometimes it help when you put your phone to a sack of rice so that it will suck moisture. But eventually you will need to replace it.
Click to expand...
Click to collapse
I'm going to try and update...
I hop it's not that but, it's true that it's an old phone, still i will be sad it's hard to find good phones with keyboard in France...

Categories

Resources