Database Users

[Q] HTC BLISS - WWE SENSE 3.5 FOR HD2 [v1.1]

Hello everybody
I have to post here because I can't in NAND development...
This is a general question, but I post the title of the Bliss sense 3.5 rom because I actually have this...
This is a great rom , but I have 2 problems with my EU 512mb HD2...
The first, and very important, is the room left... Looking with Apps2sdgui those are my general info:
internal memory free(total): 25mb(206mb)
sd-ext free(total): 1392mb(1830mb)
cache free(total): 25mb(206mb)
So, what can I exactly delete using root explorer? Can you explain me please what exactly apps2sdgui does? I haven't understood its function, because my internal memory is full though Apps2sdgui says "apps are on SD"...
The second is the available ram... I have max 60/70mb free, according to Apps2sdgui... Sometimes, when switch from an app to another, I see the white screen with the htc green word in the middle for a 10-15 seconds... What can I do to make my phone faster and more fluid?

You do not have to delete anything using root explorer, and your apps seems to be in your SD card's EXT partition. Your cache seems poetry high though- not much you can do without backing up, repartitioning and restoring.
The free memory seems ok, though not great. Sense 3.5 builds are still being developed and are not stable yet. The HTC logo that flashes by is your Android rebooting.
If you prefer stability, choose an AOSP or CM7 build...
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)

ph03n!x said:
You do not have to delete anything using root explorer, and your apps seems to be in your SD card's EXT partition. Your cache seems poetry high though- not much you can do without backing up, repartitioning and restoring.
The free memory seems ok, though not great. Sense 3.5 builds are still being developed and are not stable yet. The HTC logo that flashes by is your Android rebooting.
If you prefer stability, choose an AOSP or CM7 build...
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)
Click to expand...
Click to collapse
According to your words, I don't need anything? or can I do something?
Sorry for my bad english, I hav never studied it in a good way, I'm trying to learn it now.....

Stuck on Quitely briliant screen
Hi
I have tried flashing this rom through CLW and everything goes well until the device reboots. it gets stuck on the Quietly brilliant screen. I left it run for 30 minutes with no luck of actually booting the system.
I have noticed when i pull my battery out and mount the device nothing is created on the SD card (no folders or files).
I have a 3 GB SD card and I have partitioned it through AD recovery with 2GB and 0 swap EXT partition.
I flashed MYUI again since i was using it before but i would really like to try your Sense Rom on my HD2 (T-Mobile).
Am I missing something? I have to say that I also tried using other Sense Roms and got the same problem. stuck on the HTC green screen or the Quietly brilliant screen and my system never loads!
Thanks for you help and keep up the good work.

My HD2 is the european version...
But perhaps I can help you... Have you partitioned your cwr?

franklinzappa said:
My HD2 is the european version...
But perhaps I can help you... Have you partitioned your cwr?
Click to expand...
Click to collapse
Hey,
Thanks for the reply. I am not really sure I have done CWR partition. All I have done is SD partition to 2GB and 0 swap since I have always used MIUI Roms on my HD2 and before I had WM7 and stock Roms.
If CWR partition is needed for this rom how do u do that?
Thanks

franklinzappa said:
Hello everybody
I have to post here because I can't in NAND development...
This is a general question, but I post the title of the Bliss sense 3.5 rom because I actually have this...
This is a great rom , but I have 2 problems with my EU 512mb HD2...
The first, and very important, is the room left... Looking with Apps2sdgui those are my general info:
internal memory free(total): 25mb(206mb)
sd-ext free(total): 1392mb(1830mb)
cache free(total): 25mb(206mb)
So, what can I exactly delete using root explorer? Can you explain me please what exactly apps2sdgui does? I haven't understood its function, because my internal memory is full though Apps2sdgui says "apps are on SD"...
The second is the available ram... I have max 60/70mb free, according to Apps2sdgui... Sometimes, when switch from an app to another, I see the white screen with the htc green word in the middle for a 10-15 seconds... What can I do to make my phone faster and more fluid?
Click to expand...
Click to collapse
Because this ROM very big so it need use many NAND space and SD-EXT Partition to store sytem and app.
App was moved to EXT partition but Dalvik cache still on NAND so you can move Dalvik cache to EXT to save more Internal memory (when you move Dalvik to EXT, you will have about 150-200 Mb free on NAND)

nickshel81 said:
Hey,
Thanks for the reply. I am not really sure I have done CWR partition. All I have done is SD partition to 2GB and 0 swap since I have always used MIUI Roms on my HD2 and before I had WM7 and stock Roms.
If CWR partition is needed for this rom how do u do that?
Thanks
Click to expand...
Click to collapse
Ok, as I thought, you didn't
If you already have magldr, this is what you have to do:
1. flash recovery. this is the link: http://www.mediafire.com/?f81pamq6fbjmtw5
(I've found this link here in the forum)
download it, then you have to modify this file: flash.cfg
you have to open it with notepad, but put an eye on NOT change permanently the extension ( it's .cfg, have to be .cfg)
once you opened it, you have to modify like that:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 440M
cache ya 5M
userdata ya|asize|hr allsize
-my english is not very good, if you don't understand PLEASE tell me and I'll explain it again-
save the changes, then go to magldr menu, connect phone to pc, search in your phone in magldr menu "usb flasher", run DAF.exe in recovery folder on pc, follow the guide. Your phone will reboot and go to magldr menu.
Choose "ad recovery".
2.wipe full data, and dalvik cache
3. flash rom: in ad recovery, choose "install zip from sd card", and select your rom
4. reboot
If someting goes wrong, please tell me

langthang said:
Because this ROM very big so it need use many NAND space and SD-EXT Partition to store sytem and app.
App was moved to EXT partition but Dalvik cache still on NAND so you can move Dalvik cache to EXT to save more Internal memory (when you move Dalvik to EXT, you will have about 150-200 Mb free on NAND)
Click to expand...
Click to collapse
thank you langthang, I'll move dalvik cache...
Can I ask you if this will make my phone slower???

franklinzappa said:
Ok, as I thought, you didn't
If you already have magldr, this is what you have to do:
1. flash recovery. this is the link: http://www.mediafire.com/?f81pamq6fbjmtw5
(I've found this link here in the forum)
download it, then you have to modify this file: flash.cfg
you have to open it with notepad, but put an eye on NOT change permanently the extension ( it's .cfg, have to be .cfg)
once you opened it, you have to modify like that:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 440M
cache ya 5M
userdata ya|asize|hr allsize
-my english is not very good, if you don't understand PLEASE tell me and I'll explain it again-
save the changes, then go to magldr menu, connect phone to pc, search in your phone in magldr menu "usb flasher", run DAF.exe in recovery folder on pc, follow the guide. Your phone will reboot and go to magldr menu.
Choose "ad recovery".
2.wipe full data, and dalvik cache
3. flash rom: in ad recovery, choose "install zip from sd card", and select your rom
4. reboot
If someting goes wrong, please tell me
Click to expand...
Click to collapse
cool.
Thanks again for your help. ill try it out and let you know if it worked
one thing though if I made those changes will I be able to use other Roms in case I didnt like this one? i.e. can i use MIUI in case i changed my mind?
Thanks

nickshel81 said:
cool.
Thanks again for your help. ill try it out and let you know if it worked
one thing though if I made those changes will I be able to use other Roms in case I didnt like this one? i.e. can i use MIUI in case i changed my mind?
Thanks
Click to expand...
Click to collapse
You're welcome ( is this the way to say this?)
Yes of course, you can always change rom
If you want to change to miui, cm7 and so on, you only have to change cwr version to v3.0.2.5 or else ( it's written in rom thread )...
if you want to change recovery partition, you only have to use notepad again and run daf.exe again... I think it's quite simple...
Please tell me the result

franklinzappa said:
You're welcome ( is this the way to say this?)
Yes of course, you can always change rom
If you want to change to miui, cm7 and so on, you only have to change cwr version to v3.0.2.5 or else ( it's written in rom thread )...
if you want to change recovery partition, you only have to use notepad again and run daf.exe again... I think it's quite simple...
Please tell me the result
Click to expand...
Click to collapse
Just tried it. It looks amazing and exactly as I expected.
Only one thing that I don't like is that it is very choppy! as in when u click on something it takes few seconds to load or when u switch screens there is a lag or a drag as if there is not enough memory to run the command.
Anyway we can tweak the settings of the recovery to make it faster?
thanks again for all your help

nickshel81 said:
Just tried it. It looks amazing and exactly as I expected.
Only one thing that I don't like is that it is very choppy! as in when u click on something it takes few seconds to load or when u switch screens there is a lag or a drag as if there is not enough memory to run the command.
Anyway we can tweak the settings of the recovery to make it faster?
thanks again for all your help
Click to expand...
Click to collapse
Yes, I experience it too... If you read my whole thread, I asked for some solution, but I think there aren't... Sense-based roms are slowlier than non-sense, hd2's hardware is perhaps a bit too old, but this is only my opinion... Have you read the thread in Nand development? I've tried some sense 3.0 rom, but I can say with no doubt this is the fastest...
This is the 1.1 release, next update will probably be better in speed... And I hope in camera and bluetooth fix as soon as possible... I'm pretty satisfied, for maximum sense experience, I think we should buy sensation, evo or other younger htc
You can try deleting some apps, if you don't use them, and look at task manager, it helps you stopping background apps, that can free ram memory...
Which kernel do you use? Most of people wrote in rom thread in nand development that jw-tytung is faster, and I confirm... All these things will help you, this is my opinion...

Hey there,
i'm using the HTC Bliss Rom for 2 days now and i think it's really great, but i have one problem, and it is significant. Everytime the display goes in standby-mode the connection gets lost. Even when i call somebody and put the phone to my ear, the connection breaks up immediately when the display turns itself off.
I really want to keep this rom, so please can somebody help me

[Q] Wont Boot into Andriod

My HD2 wont successively boot into android. I've tried many Different Roms sense and non sense, but still wont work. I either get get a (status 0) error in CWM or it says it installs but i reboot and choose to boot nand via MAGLDR and get the error "no boot sources" I'm I doing something wrong? I wipe my system before each install and portion it correctly. I had it booting Andriod Cm7 via Haret and Cdlar or what ever. I'm stuck Please Help out

Renegade99 said:
My HD2 wont successively boot into android. I've tried many Different Roms sense and non sense, but still wont work. I either get get a (status 0) error in CWM or it says it installs but i reboot and choose to boot nand via MAGLDR and get the error "no boot sources" I'm I doing something wrong? I wipe my system before each install and portion it correctly. I had it booting Andriod Cm7 via Haret and Cdlar or what ever. I'm stuck Please Help out
Click to expand...
Click to collapse
What are your partition sizes? Particularily sense roms require a large partition. If your partition isn't large enough for the system, it will not boot.
Edit: Sorry I just reread where you said you partition is correctly.
Make sure your downloading the correct rom ?? Sorry I'm not much help on this.

Yeah, i partitioned it right 1024 and 0 swap, Sense roms give me a status 0 error and non sense give me that no boot sources error on MAGLDR

Did u tried cLK ? Did u did full install proces ?

Cjovecje! said:
Did u tried cLK ? Did u did full install proces ?
Click to expand...
Click to collapse
I dont have that installed? isnt that just Clockwork mod

every type of isntall has its steps. Did u followed exactly ?

Yeah...wipe, partition SD, install via zip CWM or at least that's what I do
Sent from my HTC HD2 using XDA App

Did u did task29 ?

Is this U´r first Try to flash Rom´s?

Renegade99 said:
Yeah, i partitioned it right 1024 and 0 swap, Sense roms give me a status 0 error and non sense give me that no boot sources error on MAGLDR
Click to expand...
Click to collapse
I think what he meant was is the system partition correct? Not SD-EXT.

Nigeldg said:
I think what he meant was is the system partition correct? Not SD-EXT.
Click to expand...
Click to collapse
Yea that's exactly what I meant if your system isn't partitioned correctly there will be boot problems every time. Search for "HD2 Toolkit" it makes it so much easier.
Task 29
Then install magldr or clk with the correct system partitions.*most important part*
Install clockwork mod
Flash your rom
Reboot and it should start fine.
Sent from my HD2 using xda premium

I have two HD2s this one is running off NAND Hard Droid 2. I did all the steps I did with this one. Flashed Hspl3 choose spl 2.08 after that was done flashed magldr then installed CWM via SD and portitioned the SD? Not sure about system. Swap 0 as it said in instructions. Flashed zip and I get the errors. Could someone tell how to task 29. Isn't that a nand wipe?
Sent from my HTC HD2 using XDA App

Needs that tool box thing xD
Sent from my HTC HD2 using XDA App

I'm on my phone so I can't give you the specific link. If you go to the guide in my signature I have a link to hd2 toolkit. You need this program. It will solve your problems because your system partitions are not correct. Swap and things like that matters but its on your SD card. Your problem is with the internal partitions.
Download the program I promise its worth it. If you don't like it delete it but at least try it so you can boot and experience android on nand.
If you want to use clk my guide might help you with that to.
Sent from my HD2 using xda premium

Task 29 deletes all data on your phone but not SD card.
Sent from my HD2 using xda premium

Alright I'll try it later when I'm on the computer
Sent from my HTC HD2 using XDA App

I don't know if I can ask my question in this topic, but I think partitioning is part of my issue. On my HD2, I installed Ice Cream Sandwich Beta7. Used Magdlr. At first it won't booit into android either, but that was because I used the recovery_1.3400MB. Later I used the 250MB.
But then I got problems with installing apps: Internal space was insufficient. So I read this topic:http://forum.xda-developers.com/showthread.php?p=20577589 See page 12.
So I followed these steps:
Backup your SD card data (and prefferably nandroid backup your rom) and use recovery to repartition your SD.
Go to recovery, advanced, Partition SD Card
Partitioning to 1024 works wel, but 2048 won't. I don't know why, cause it's a 2GB sd card. But after partitioning, Android isn't using the space on the sd-card.
I can manually copy apps to the SD card, but it still gives errors about insufficient internal memory......

2gb=2000mb that's a problem if only using a 2gb for partitioning over 2gigs xD
Sent from my HTC HD2 using XDA App

Renegade99 said:
2gb=2000mb that's a problem if only using a 2gb for partitioning over 2gigs xD
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Actually 2GB = 2048 MB...
But still the question is; when I choose 1024, why doesn't android use this partition as extra storage?? So why am I getting errors of insufficient space?

Check your properties on the SD because they usually lie to you about how much storage it is. Its rarely plain out too gigs
Sent from my HTC HD2 using XDA App

Nand problem

Hi
During more than year of my "android on hd2 experience" I've had no problems at all. To be honest i became quite handy on this field.
recently I was using two roms daily HyperDroid-CM7 and testing NexusHD2-IceCreamSandwich Beta.
on NexusHD2 rom i install Data2SDInstaller.
and my problem started when I wanted to go back to HyperDroid.
boot animation stuck, of course i tried clk / magdlr different partition sizes always task29...without any effects. Now I tried NexusHD2 ICS 4.0.3 CM9 V1.0 , finally went through boot animation,when i saw Setup Wizard the messages appear immediately: "Unfortunetly, the process ....... has stopped" and when I click OK appears next and the next message , such as contacts, Email, calendar, etc. i thing all of the possible .. later message: Setup Wizard not responding.
And it happens on magdlr/300/5
I've read already about bad NAND blocks, and in recovery.log I did not detect any of them
I tried to run MTTY but I have a problem with drivers win7x64: - /
Does anyone know what's wrong with my HD2 and how to solve it.

you remembered to wipe the sd-ext partition and .android folder (cwm - wipe data / factory reset) right?
there are folders on both sd-ext and on the fat32 partition that will screw with new installs.

samsamuel said:
you remembered to wipe the sd-ext partition and .android folder (cwm - wipe data / factory reset) right?
there are folders on both sd-ext and on the fat32 partition that will screw with new installs.
Click to expand...
Click to collapse
Like he said, you need to wipe your sd card, ext and fat32. Both parts. This is majorly important since you used Apps 2SD!!
Another thing, I think your system size is way off. 200/5 for cLK if not 180/5 and for magldr probably like 200/44 but at least 10mb of cache..

I'm not too sure if this will help or not but this is my experience.
I have been on these forums for a while and using Hyperdroid for quite some time now as well. The reason why I do not have any posts on this account is because I switched over just today, my old account was imarte068.
When trying to update my Hyperdroid the other day through magdlr I encountered an issue. No matter the partition size or sd-card, it always managed to get stuck on boot. I got frustrated and attempted to re-flash countless times. After many attempts I gave up and just used an MIUI rom.
Several days later I devoted myself to solving the issue. After about an hour or so of trial and error I fixed it. I simply re-flashed the kernel after the installation of the rom. I am using magdlr therefore I do not know if the process will be the same for clk.
Hope I could be of help.

I thought it was a sdcard and i delete all partition and make it new.
I do always full wipe and dalvic...

QuRa said:
I thought it was a sdcard and i delete all partition and make it new.
I do always full wipe and dalvic...
Click to expand...
Click to collapse
Try re-flashing the kernel as I said in the post above.
Link to kernel here.
Hope I could be of help.

This may spur some argument, but in my experience task 29 is the key if you're having problems. many people say wipe with cwm the system boot davlik cache, etc but in my testing when I'm having a problem and need to solve it task 29 has been the answer almost everytime. Partition size is huge as well. Another thing if you were using apps2 SD on ics it was bugged. Without formatting your SD it is possible that it could bug your system.
Sent from my HD2 using xda premium

http://forum.xda-developers.com/showthread.php?t=1326217
In this thread you can find complete guide for install rom written by me. If that fails contact me for further solutions. Good Luck

kylew1212 said:
Like he said, you need to wipe your sd card, ext and fat32. Both parts. This is majorly important since you used Apps 2SD!!
Another thing, I think your system size is way off. 200/5 for cLK if not 180/5 and for magldr probably like 200/44 but at least 10mb of cache..
Click to expand...
Click to collapse
Im using 220 with 5mb cache. ICS running smooth without any problems. And no need to fully wipe sdcard. Would be stupid to delete the whole card just for flashing a new rom hehe. Its enough to wipe the (dalvik) cache and sd-ext partition via CWM.
For data2sd use the 'how to' from post #207 and the flashable file from post #174 in tytungs ics cm9 v1 thread. I think it removes old app2sd or data2sd scripts. Worked without any formatting of my sdcard.. works like a charm.
Btw.. ever tried to fix permissions? First thing you should try if you get FC.
Just do (re)install the rom like the guy in post #207 described but with the file from #174 (40ad2sdx-a2Recovery.zip)
And im using my hd2 now for more then one year. NEVER used task29.
Hf
Edit: btw for problems with your Usb? Driver on win7 machines try to install new version of WMDC (windows mobile device center)
Solved the problem for a friend
Sent from my NexusHD2

redplate said:
Im using 220 with 5mb cache. ICS running smooth without any problems. And no need to fully wipe sdcard. Would be stupid to delete the whole card just for flashing a new rom hehe. Its enough to wipe the (dalvik) cache and sd-ext partition via CWM.
For data2sd use the 'how to' from post #207 and the flashable file from post #174 in tytungs ics cm9 v1 thread. I think it removes old app2sd or data2sd scripts. Worked without any formatting of my sdcard.. works like a charm.
Btw.. ever tried to fix permissions? First thing you should try if you get FC.
Just do (re)install the rom like the guy in post #207 described but with the file from #174 (40ad2sdx-a2Recovery.zip)
And im using my hd2 now for more then one year. NEVER used task29.
Hf
Edit: btw for problems with your Usb? Driver on win7 machines try to install new version of WMDC (windows mobile device center)
Solved the problem for a friend
Sent from my NexusHD2
Click to expand...
Click to collapse
As I said people will disagree. I will say that in most cases you're right though, wiping the davlik cache is enough. I am just saying from my personal experience there are sometimes when it isn't (at least on my phone). I'm not trying to start an argument, I just want to help him.
Sent from my HD2 using xda premium

big thanks mates for advice.
So far I haven't had time for it but for sure tomorrow or on the weekend, I will deal with this and I will let you know how it goes.

In brief I run ICS all fine, but HyperDroid not starting.
Here is how i try:
________
Ok I was using WP7 and whats I made:
SD card: I delete all partition, I make only one Fat32 than in CWM I made ext partition.
Task29 > Clk 200/5 > recovery > install HyperDroid-CM7-v5.7.0 > And here phone stuck before boot animation, only white android robo > then as flamgodian advice I install kernel thins. > Same without boot animation.
Second try
Task29>clk 220/5>recovery>wipe(all possible)>install HyperDroid-CM7-v5.7.0>same robo>fix permision> install kernel this> I saw robo for 10s and phone self reboot after reboot > stuck :/
I have not seen even the boot animation.
Task29>clk 220/5>recovery>wipe(all possible)>install NexusHD2-ICS-CM9>Kernel>
He goes
__
I make like redplate(Big Thanks) write with installation 40ad2sdx, and everything runs great.
I will stay with ICS but it is strange why my phone doesn't like HyperDroid Rom.
And from here I would like to thank you all for advice.

CAN'T BOOT TO 4.0 but 2.3 is fine???

how come none of the ICS 4.0 works but all 2.3 works? did it flash the wrong MAGDLR and HSPL or something? all 2.3 takes 3 minutes to boot. but all ICS are passing 1 hour and it's still not booting 4.0

what size of system partition u using ?

_JaSoN_ said:
what size of system partition u using ?
Click to expand...
Click to collapse
not sure what you mean. maybe that's the problem

http://forum.xda-developers.com/showthread.php?t=1434860
check there
Installations:
Please use at least 165MB system partition and at least 2MB cache partition.

sigh... this is disheartening...

i don't get it. i go to 8. AD RECOVERY and partition SD to at least 200mb and least 2mb and still just loads and loads and loads on the colorful boot screen.

No, you don't partition your SD, you flash a new CWM partition layout. Download CWM, change the flash.cfg to whatever size is necessary then enter USB flasher mode on the phone and flash from the PC. On your SD card a 1gb EXT partiton is recommended which is probably what you had before changing it.

Nigeldg said:
No, you don't partition your SD, you flash a new CWM partition layout. Download CWM, change the flash.cfg to whatever size is necessary then enter USB flasher mode on the phone and flash from the PC. On your SD card a 1gb EXT partiton is recommended which is probably what you had before changing it.
Click to expand...
Click to collapse
yeah... no idea what you're talking about.

upsidedownbanana said:
yeah... no idea what you're talking about.
Click to expand...
Click to collapse
Well then go do some research and don't bother flashing any phones in the future if you can't figure it out after that

Nigeldg said:
Well then go do some research and don't bother flashing any phones in the future if you can't figure it out after that
Click to expand...
Click to collapse
This thread made my day xP
Sent from my HTC HD2 using Tapatalk

your system partition is not big enough...220is needed

got it working. had to download the NAND tool by searching google. because none of the links on this forum works. that's what i really needed. everything else was silk

upsidedownbanana said:
got it working. had to download the NAND tool by searching google. because none of the links on this forum works. that's what i really needed. everything else was silk
Click to expand...
Click to collapse
*slow sarcastic clapping* Well done, you used Google. Next time, do this before posting unnecessary threads

ah come on be easy on the noob! as great as this whole thread is, just remember there was SOME point you had to ask some question for the millionth only to answer it yourself.
but seriously ... try google first!

Help .cant install tbd rom android !!!

Hi guys little help pleaseeeee over hereeee......
i installed win 7 after android ....dont like it...my sd was locked... i unlocked with nokia after 2 weeks !!! now im tryingggg to put android again and i CANTTTT !!!! i cantttttt im going to jump from the building i dont now what to doooooooooo ... i trying to install tbd rom and im getting the messeage (status 0) installation aborted !
a guide please...im comfused.... i dont now what to flash first ... i have flash hspl after mag after recovery...... what recovery is the right one? 150 ? 250? 400 ? anyway then in recovery go to wipe data factory then wipe cache partition then wipe dalvik cache then partition sd card 1024m and then copy the zip rom in sd and install it with recovery

win7???tell me how u did it....
wp7???
format your sdcard with the sdcard reader---download a rom copy to sd--
flash maglrd1.1.3---flash recovery5---flash rom---reboot----wait for a while---done..

you can see the correct size of Recovery in the description of the ROM which you want to install
Sent from my HTC HD2 using XDA

110718 said:
Hi guys little help pleaseeeee over hereeee......
i installed win 7 after android ....dont like it...my sd was locked... i unlocked with nokia after 2 weeks !!! now im tryingggg to put android again and i CANTTTT !!!! i cantttttt im going to jump from the building i dont now what to doooooooooo ... i trying to install tbd rom and im getting the messeage (status 0) installation aborted !
a guide please...im comfused.... i dont now what to flash first ... i have flash hspl after mag after recovery...... what recovery is the right one? 150 ? 250? 400 ? anyway then in recovery go to wipe data factory then wipe cache partition then wipe dalvik cache then partition sd card 1024m and then copy the zip rom in sd and install it with recovery
Click to expand...
Click to collapse
Half of your post is indecipherable, please learn how to spell! Using multiple letters won't help you in any way.
As for your question, the correct partition sizes will be stated in your ROM of choice. Just use the HD2 NAND toolkit to make everything easier.

u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/

gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
I would suggest the newer radio...
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium

gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
Yes, this, except skip steps 1 to 4 and only flash a new recovery
As I said, use the HD2 NAND toolkit to repartition, it makes things much easier. If you want to you can also download the suggested Recovery_150M_system_5M_cache then change the file inside that folder called Flash.cfg to the required size

saroni said:
win7???tell me how u did it....
wp7???
format your sdcard with the sdcard reader---download a rom copy to sd--
flash maglrd1.1.3---flash recovery5---flash rom---reboot----wait for a while---done..
Click to expand...
Click to collapse
I dont remember how i did it with windows mobile 7...in mag i did something with the 24 last nand i think after i flash a rom ithink...
wait ....
1. flash mag (in bootloader run the rom update utility exe) right?
2. flash recovery (cant find in rom what recovery to install i look a lot of times ) this is the rom : http://forum.xda-developers.com/showthread.php?t=1275119 can you find it PLEASEEEEE ????
3. copy rom in sd and run it from recovery in (run zip file from sd ) right?
This is the steps?????????

kali926 said:
you can see the correct size of Recovery in the description of the ROM which you want to install
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
i cant find it please can you look? http://forum.xda-developers.com/showthread.php?t=1275119

Nigeldg said:
Half of your post is indecipherable, please learn how to spell! Using multiple letters won't help you in any way.
As for your question, the correct partition sizes will be stated in your ROM of choice. Just use the HD2 NAND toolkit to make everything easier.
Click to expand...
Click to collapse
Sorry not very good with english....nand toolkit? hmmm.. ok i look for that... thanks...

gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
i have HSPL3_PKG its not good?
radio i think i have 2.08 yes
mag 113 ok
and recov 150 ok...
and what is the steps..what to flash first?????

Nigeldg said:
Yes, this, except skip steps 1 to 4 and only flash a new recovery
As I said, use the HD2 NAND toolkit to repartition, it makes things much easier. If you want to you can also download the suggested Recovery_150M_system_5M_cache then change the file inside that folder called Flash.cfg to the required size
Click to expand...
Click to collapse
Ok so..i will flash the 150 recovery only? if i want to do it fresh? from the start how i will do it?

110718 said:
i have HSPL3_PKG its not good?
radio i think i have 2.08 yes
mag 113 ok
and recov 150 ok...
and what is the steps..what to flash first?????
Click to expand...
Click to collapse
All you need to do is flash a new recovery. This post says it's 172mb. Task29 and stuff really won't help you uness you are experiencing major problems.

Nigeldg said:
All you need to do is flash a new recovery. This post says it's 172mb. Task29 and stuff really won't help you uness you are experiencing major problems.
Click to expand...
Click to collapse
My hd2 is now with the unfinished rom install ..its in the error ...should i format something? no? only recovery? ok exist recovery 172 mb? i have 150m 250m and 400mb ...please helpp..... i dont understand....

Dont need to ext partition the sd??? i have eu model ! i dont undestand

110718 said:
Dont need to ext partition the sd??? i have eu model ! i dont undestand
Click to expand...
Click to collapse
Yes you need to create an SD EXT partition, but this can easily be done in CWM. To flash a 172 MB partition, download any recovery size then open the file flash.cfg (not flash.cfg.txt) with notepad, then change the system partition size to 172 MB and leave everything else the same

Nigeldg said:
Yes you need to create an SD EXT partition, but this can easily be done in CWM. To flash a 172 MB partition, download any recovery size then open the file flash.cfg (not flash.cfg.txt) with notepad, then change the system partition size to 172 MB and leave everything else the same
Click to expand...
Click to collapse
I Install the right recovery and THE PHONE WORK !!!! YEAAA I DID IT!!!! but without the steps you are saying ..I didn't do any partition ! Now? My phone don't work properly ??? My Rom is tbd 3.6 the last..

110718 said:
I Install the right recovery and THE PHONE WORK !!!! YEAAA I DID IT!!!! but without the steps you are saying ..I didn't do any partition ! Now? My phone don't work properly ??? My Rom is tbd 3.6 the last..
Click to expand...
Click to collapse
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone

Kameirus said:
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone
Click to expand...
Click to collapse
Massive +1 to this, if you can't be bothered to read don't bother flashing anything. Seriously.

Kameirus said:
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone
Click to expand...
Click to collapse
No its not that ! im new to this and i dont now good english my phone was locked from win 7 1 month and i was trying trying trying by my self to fix it ! yesterday i run again for the first time android again.. with a lot of reading and time ! and im not expert on mobile ... all this seems to me very difficult ! i try to set up a partition with the other recovery i have but i was getting always error now i install the proper recovery from the tbd post.. (TBD_4EXT_New_7_172_7)
and the phone works but i dont understand how to do partition and i dont now if i have done partition and i dont now it...my card when i connect it to pc is 13gb but my sd card is 16 gb !! where is the other 3gb ??? is there a partision? how can i see if i have it in my hd2 ?????