Hello everybody
I have to post here because I can't in NAND development...
This is a general question, but I post the title of the Bliss sense 3.5 rom because I actually have this...
This is a great rom , but I have 2 problems with my EU 512mb HD2...
The first, and very important, is the room left... Looking with Apps2sdgui those are my general info:
internal memory free(total): 25mb(206mb)
sd-ext free(total): 1392mb(1830mb)
cache free(total): 25mb(206mb)
So, what can I exactly delete using root explorer? Can you explain me please what exactly apps2sdgui does? I haven't understood its function, because my internal memory is full though Apps2sdgui says "apps are on SD"...
The second is the available ram... I have max 60/70mb free, according to Apps2sdgui... Sometimes, when switch from an app to another, I see the white screen with the htc green word in the middle for a 10-15 seconds... What can I do to make my phone faster and more fluid?
You do not have to delete anything using root explorer, and your apps seems to be in your SD card's EXT partition. Your cache seems poetry high though- not much you can do without backing up, repartitioning and restoring.
The free memory seems ok, though not great. Sense 3.5 builds are still being developed and are not stable yet. The HTC logo that flashes by is your Android rebooting.
If you prefer stability, choose an AOSP or CM7 build...
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)
ph03n!x said:
You do not have to delete anything using root explorer, and your apps seems to be in your SD card's EXT partition. Your cache seems poetry high though- not much you can do without backing up, repartitioning and restoring.
The free memory seems ok, though not great. Sense 3.5 builds are still being developed and are not stable yet. The HTC logo that flashes by is your Android rebooting.
If you prefer stability, choose an AOSP or CM7 build...
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)
Click to expand...
Click to collapse
According to your words, I don't need anything? or can I do something?
Sorry for my bad english, I hav never studied it in a good way, I'm trying to learn it now.....
Stuck on Quitely briliant screen
Hi
I have tried flashing this rom through CLW and everything goes well until the device reboots. it gets stuck on the Quietly brilliant screen. I left it run for 30 minutes with no luck of actually booting the system.
I have noticed when i pull my battery out and mount the device nothing is created on the SD card (no folders or files).
I have a 3 GB SD card and I have partitioned it through AD recovery with 2GB and 0 swap EXT partition.
I flashed MYUI again since i was using it before but i would really like to try your Sense Rom on my HD2 (T-Mobile).
Am I missing something? I have to say that I also tried using other Sense Roms and got the same problem. stuck on the HTC green screen or the Quietly brilliant screen and my system never loads!
Thanks for you help and keep up the good work.
My HD2 is the european version...
But perhaps I can help you... Have you partitioned your cwr?
franklinzappa said:
My HD2 is the european version...
But perhaps I can help you... Have you partitioned your cwr?
Click to expand...
Click to collapse
Hey,
Thanks for the reply. I am not really sure I have done CWR partition. All I have done is SD partition to 2GB and 0 swap since I have always used MIUI Roms on my HD2 and before I had WM7 and stock Roms.
If CWR partition is needed for this rom how do u do that?
Thanks
franklinzappa said:
Hello everybody
I have to post here because I can't in NAND development...
This is a general question, but I post the title of the Bliss sense 3.5 rom because I actually have this...
This is a great rom , but I have 2 problems with my EU 512mb HD2...
The first, and very important, is the room left... Looking with Apps2sdgui those are my general info:
internal memory free(total): 25mb(206mb)
sd-ext free(total): 1392mb(1830mb)
cache free(total): 25mb(206mb)
So, what can I exactly delete using root explorer? Can you explain me please what exactly apps2sdgui does? I haven't understood its function, because my internal memory is full though Apps2sdgui says "apps are on SD"...
The second is the available ram... I have max 60/70mb free, according to Apps2sdgui... Sometimes, when switch from an app to another, I see the white screen with the htc green word in the middle for a 10-15 seconds... What can I do to make my phone faster and more fluid?
Click to expand...
Click to collapse
Because this ROM very big so it need use many NAND space and SD-EXT Partition to store sytem and app.
App was moved to EXT partition but Dalvik cache still on NAND so you can move Dalvik cache to EXT to save more Internal memory (when you move Dalvik to EXT, you will have about 150-200 Mb free on NAND)
nickshel81 said:
Hey,
Thanks for the reply. I am not really sure I have done CWR partition. All I have done is SD partition to 2GB and 0 swap since I have always used MIUI Roms on my HD2 and before I had WM7 and stock Roms.
If CWR partition is needed for this rom how do u do that?
Thanks
Click to expand...
Click to collapse
Ok, as I thought, you didn't
If you already have magldr, this is what you have to do:
1. flash recovery. this is the link: http://www.mediafire.com/?f81pamq6fbjmtw5
(I've found this link here in the forum)
download it, then you have to modify this file: flash.cfg
you have to open it with notepad, but put an eye on NOT change permanently the extension ( it's .cfg, have to be .cfg)
once you opened it, you have to modify like that:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 440M
cache ya 5M
userdata ya|asize|hr allsize
-my english is not very good, if you don't understand PLEASE tell me and I'll explain it again-
save the changes, then go to magldr menu, connect phone to pc, search in your phone in magldr menu "usb flasher", run DAF.exe in recovery folder on pc, follow the guide. Your phone will reboot and go to magldr menu.
Choose "ad recovery".
2.wipe full data, and dalvik cache
3. flash rom: in ad recovery, choose "install zip from sd card", and select your rom
4. reboot
If someting goes wrong, please tell me
langthang said:
Because this ROM very big so it need use many NAND space and SD-EXT Partition to store sytem and app.
App was moved to EXT partition but Dalvik cache still on NAND so you can move Dalvik cache to EXT to save more Internal memory (when you move Dalvik to EXT, you will have about 150-200 Mb free on NAND)
Click to expand...
Click to collapse
thank you langthang, I'll move dalvik cache...
Can I ask you if this will make my phone slower???
franklinzappa said:
Ok, as I thought, you didn't
If you already have magldr, this is what you have to do:
1. flash recovery. this is the link: http://www.mediafire.com/?f81pamq6fbjmtw5
(I've found this link here in the forum)
download it, then you have to modify this file: flash.cfg
you have to open it with notepad, but put an eye on NOT change permanently the extension ( it's .cfg, have to be .cfg)
once you opened it, you have to modify like that:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 440M
cache ya 5M
userdata ya|asize|hr allsize
-my english is not very good, if you don't understand PLEASE tell me and I'll explain it again-
save the changes, then go to magldr menu, connect phone to pc, search in your phone in magldr menu "usb flasher", run DAF.exe in recovery folder on pc, follow the guide. Your phone will reboot and go to magldr menu.
Choose "ad recovery".
2.wipe full data, and dalvik cache
3. flash rom: in ad recovery, choose "install zip from sd card", and select your rom
4. reboot
If someting goes wrong, please tell me
Click to expand...
Click to collapse
cool.
Thanks again for your help. ill try it out and let you know if it worked
one thing though if I made those changes will I be able to use other Roms in case I didnt like this one? i.e. can i use MIUI in case i changed my mind?
Thanks
nickshel81 said:
cool.
Thanks again for your help. ill try it out and let you know if it worked
one thing though if I made those changes will I be able to use other Roms in case I didnt like this one? i.e. can i use MIUI in case i changed my mind?
Thanks
Click to expand...
Click to collapse
You're welcome ( is this the way to say this?)
Yes of course, you can always change rom
If you want to change to miui, cm7 and so on, you only have to change cwr version to v3.0.2.5 or else ( it's written in rom thread )...
if you want to change recovery partition, you only have to use notepad again and run daf.exe again... I think it's quite simple...
Please tell me the result
franklinzappa said:
You're welcome ( is this the way to say this?)
Yes of course, you can always change rom
If you want to change to miui, cm7 and so on, you only have to change cwr version to v3.0.2.5 or else ( it's written in rom thread )...
if you want to change recovery partition, you only have to use notepad again and run daf.exe again... I think it's quite simple...
Please tell me the result
Click to expand...
Click to collapse
Just tried it. It looks amazing and exactly as I expected.
Only one thing that I don't like is that it is very choppy! as in when u click on something it takes few seconds to load or when u switch screens there is a lag or a drag as if there is not enough memory to run the command.
Anyway we can tweak the settings of the recovery to make it faster?
thanks again for all your help
nickshel81 said:
Just tried it. It looks amazing and exactly as I expected.
Only one thing that I don't like is that it is very choppy! as in when u click on something it takes few seconds to load or when u switch screens there is a lag or a drag as if there is not enough memory to run the command.
Anyway we can tweak the settings of the recovery to make it faster?
thanks again for all your help
Click to expand...
Click to collapse
Yes, I experience it too... If you read my whole thread, I asked for some solution, but I think there aren't... Sense-based roms are slowlier than non-sense, hd2's hardware is perhaps a bit too old, but this is only my opinion... Have you read the thread in Nand development? I've tried some sense 3.0 rom, but I can say with no doubt this is the fastest...
This is the 1.1 release, next update will probably be better in speed... And I hope in camera and bluetooth fix as soon as possible... I'm pretty satisfied, for maximum sense experience, I think we should buy sensation, evo or other younger htc
You can try deleting some apps, if you don't use them, and look at task manager, it helps you stopping background apps, that can free ram memory...
Which kernel do you use? Most of people wrote in rom thread in nand development that jw-tytung is faster, and I confirm... All these things will help you, this is my opinion...
Hey there,
i'm using the HTC Bliss Rom for 2 days now and i think it's really great, but i have one problem, and it is significant. Everytime the display goes in standby-mode the connection gets lost. Even when i call somebody and put the phone to my ear, the connection breaks up immediately when the display turns itself off.
I really want to keep this rom, so please can somebody help me
Related
Its not opening anything..
Followed the guide.. Help!!!
Hegemor said:
Its not opening anything..
Followed the guide.. Help!!!
Click to expand...
Click to collapse
Do you have HardSPL 2.08 and a new 2.**.50.** Radio flashed?
What version of Magldr do you have?
Are you trying to install a Magldr (*.exe) or ClockworkMod (*.zip) Rom?
Please list EXACTLY what you did and what happened as the information you gave doesnt tell us anything.
Mark.
As I was answering you question I realised that i have used the wrong android file, so Now its working... hehe..
The only problem is now the storage on the phone, ther is almost no space on the phone... When I set up active sync on my phon, will the emails take place in the phone or the SD card?
Hegemor said:
The only problem is now the storage on the phone, ther is almost no space on the phone... When I set up active sync on my phon, will the emails take place in the phone or the SD card?
Click to expand...
Click to collapse
I think the low storage issue is most probably coz of your /system partiton (400mb cfg file?). Now I don't know what size your roms /system cfg file should be (next time link to your rom, makes it easier for us to solve your problem), therefore I can't give an accurate answer right now, but to increase space you either have to find what /system your rom uses and flash cfg accordingly or make an EXT2/3/4 partiton on your sd card and use a2sd.
azer0 said:
I think the low storage issue is most probably coz of your /system partiton (400mb cfg file?). Now I don't know what size your roms /system cfg file should be (next time link to your rom, makes it easier for us to solve your problem), therefore I can't give an accurate answer right now, but to increase space you either have to find what /system your rom uses and flash cfg accordingly or make an EXT2/3/4 partiton on your sd card and use a2sd.
Click to expand...
Click to collapse
I have the Desire version on my HD2, and i dont have Apps2SD.
I made partitions on my SD card (FAR32 of 6.5GB and EXT3 of 1GB).
What do you mean with: "use a2sd" and "flash cfg"?
Ok, as far as I can tell this is the rom you are using http://forum.xda-developers.com/showthread.php?t=1010498?
Did you follow the exact instructions in post 2? Its seems that you forgot to edit flash.cfg file. Do a fresh install following the guide in in post 2, word by word.
I did not change the flash file..
it says:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 8M
system ya 120M
cache ya 8M
userdata ya|asize|hr allsize
Witch step do I start from?
I used this guide
http://forum.xda-developers.com/showthread.php?t=1013852
According to your rom.s thread you'd need to edit this line system ya 120M to system ya 150 from your flash.cfg and reflash hope that'll help. One more thing to use sd-ext partition download data2ext from the same page.
I now did it over again, but still have low space..
I think I even have less internal space now...
only 172 mb
Can you explain "to use sd-ext partition download data2ext from the same page." in a way a girl can understand?
That's it, there wont be more than that, maybe if you tweaked the flash.cfg you'd get ~50M more. That's where you sd-ext will come into play, its the same as your internal space but hosted in your SD, and that's where your apps and data will be stored, instead of the actual interal memory.
azer0 said:
That's it, there wont be more than that, maybe if you tweaked the flash.cfg you'd get ~50M more. That's where you sd-ext will come into play, its the same as your internal space but hosted in your SD, and that's where your apps and data will be stored, instead of the actual interal memory.
Click to expand...
Click to collapse
But how can I tweak that file... so I get more space..
Im so confused...
Sorry for all the stupid questions...
If you implement sd-ext then you don't need the extra space coz your ext2/3/4 will be used instead. As for data2sd, I think the rom you are using has a2sd, which means that if you had setup an ext2/3/4 then a2sd will automatically detect you ext partition and will install all your apps there (ext partition).
In any case here is a link to increase internal memory http://forum.xda-developers.com/showpost.php?p=11189394&postcount=1826, now this is rom specific and I don't know if it'll work with your rom.
Ok I tried to ext sd card to 2048M and chose swap size 0M hope that will work..
MY SD card is 16gb
But it says please wait and have been like this for a long time now..
I did it!!!! Who would have known that a girl could do this!!
Thank you so much for the help!!!
Hegemor said:
I did it!!!! Who would have known that a girl could do this!!
Thank you so much for the help!!!
Click to expand...
Click to collapse
Gad you got it all working in the end
Mark.
Hegemor said:
I did it!!!! Who would have known that a girl could do this!!
Thank you so much for the help!!!
Click to expand...
Click to collapse
Hurrah. Nice to know that u got it working, in the end that's all it matters. Have fun.
hey guys i have a HTC HD2 i already added the new radio
an installed magdlr ( i think thats the name) so far, i havnt had any luck flashin any roms...they flash, but never boot
i have this one flashed atm moment HyperDroidGBX-v12
but as i just started i cant post in that thread
sorry, i used the search bar, so dont eat me alive plz
i get to the blue android, but it just hangs, reboots, an does it again
help me out, what am i doin wrong
I have installed everything but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android
^ kinda like this
but im usin a regualr battery
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
rauschkugl said:
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Click to expand...
Click to collapse
yea i installed it, but im not sure if i did the partion size thingy?
maybe, but just in case i didnt, how do i do that step by step?
also do i have to fromat my sd card for this to work, its already fat 32
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
ill try that after soem one explain the pastion thing to me
although i think i did,i went to clockwork an set it to 1024
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
i set it to 1024,an 0 for the swap
an did everything in your post
still restarting, gettin worried
what do i now?
bumping
in the hopes of being helped just teeny bit quicker
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
mutil said:
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
Click to expand...
Click to collapse
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
SubZeroMaster said:
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
Click to expand...
Click to collapse
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
mutil said:
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
Click to expand...
Click to collapse
i used the program...fine
i wiped..fine
i flashed rom...fine
restarted fine...
didnt boot in to android???
whats goin on?
also thanks for the help so far, but dont abadon me yet plz
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Marvlesz said:
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Click to expand...
Click to collapse
followed this to the TEETH
an loopin......
ARRGGH plz guys dont forsake me just yet
also thx for every
bumptastic
142 people have viewed this thread
but only 4 or so people helped!
come on guys!!
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
SubZeroMaster said:
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Click to expand...
Click to collapse
man which rom you want to use? you had said hyperdoid and now you talk about 250mb nand which has nothing to do with hyperdroid!?
Marvlesz said:
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
Click to expand...
Click to collapse
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
an thanks for everyone helpin get this far
SubZeroMaster said:
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
Click to expand...
Click to collapse
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Marvlesz said:
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Click to expand...
Click to collapse
saw it in in some guys signature (250 nand ) although i dont knwo if that relates to me
no, i cant put the recorvery stuff on my sd becuase, windows is saying i have to format first (then is says it cant)
is was fine yesterday, maybe all this "stuff" i may/may not have done something
anyway how i can fromat so i can proceed?
Today I was updating my android rom (one of the first nands) and I've updated magldr and installed CWM.
Then I installed a new rom with CWM and after reboot he keeps showing the bootscreen of the rom, I've tried another rom and it's the same...
Can anybody help me?
The most common reason for being stuck at bootscreen is improper partition size. You sure you got that right?
I've taken the largest partition size (400mb)...
you don't take the largest, but rather the most suitable. (or the one stated in the rom's thread) you should also take into consideration whether the rom NEEDS sd-ext or not.
What rom do you want to use/upgrade?
Have you met the requirements? (sd-ext/system partition/cache/radio)
I've a EU 512mb HTC HD2. I don't know my rom anymore that I used but I think its a darkforce froyo rom...
I've parted my sd with cwm: 1024ext, 64mb swap and used the 400mb CWM
Now I want to install the Runnymede 3.5 or the Desire HD 3.06.405.1 - Sense 3.0 - Android 2.3.5 [v1.4][RAFPIGNA 1.9GB], i don't know which one is better...
link to those roms please?
http://forum.xda-developers.com/showthread.php?t=1275119
and
http://forum.xda-developers.com/showthread.php?t=1264828
okay for the first one (runnymede) you need 6/200/8. that means 200mb system partition, 6 boot partition and 8 cache partition. AND A 1GB SD-EXT
And for the second one you need 5/155/5. which means 155mb system partition and 5 megs for both cache and boot. AND YOU NEED 1GB SD-EXT.
Neither of these ROMs will run under a 400mb system partition ~!
And remember, always wash your hands and wipe your phone/sd before attempting another rom
Marvlesz said:
okay for the first one (runnymede) you need 6/200/8. that means 200mb system partition, 6 boot partition and 8 cache partition. AND A 1GB SD-EXT
And for the second one you need 5/155/5. which means 155mb system partition and 5 megs for both cache and boot. AND YOU NEED 1GB SD-EXT.
Neither of these ROMs will run under a 400mb system partition ~!
And remember, always wash your hands and wipe your phone/sd before attempting another rom
Click to expand...
Click to collapse
Thank you very much, I'll try it ...
And does anyone know wath's the better rom of this 2?
Marvlesz said:
okay for the first one (runnymede) you need 6/200/8. that means 200mb system partition, 6 boot partition and 8 cache partition. AND A 1GB SD-EXT
And for the second one you need 5/155/5. which means 155mb system partition and 5 megs for both cache and boot. AND YOU NEED 1GB SD-EXT.
Neither of these ROMs will run under a 400mb system partition ~!
And remember, always wash your hands and wipe your phone/sd before attempting another rom
Click to expand...
Click to collapse
Can some1 explain how i change those setting? I want the same rom (runnymede) but it stays stuck in the bootloader screen
*I change the Sd-ext part. in 1024 but how do i change the 200 mb settings and the 6 boot part.?
Slagers said:
Can some1 explain how i change those setting? I want the same rom (runnymede) but it stays stuck in the bootloader screen
*I change the Sd-ext part. in 1024 but how do i change the 200 mb settings and the 6 boot part.?
Click to expand...
Click to collapse
If you're using the old method, then look for a file called config.cfg, edit that using any file editor.
But if you're using the NAND Toolkit, you can edit them by selecting the desired partition from the panels on the left or the right, depending on your bootloader, and the cache is just right below those panels.
Marvlesz said:
If you're using the old method, then look for a file called config.cfg, edit that using any file editor.
But if you're using the NAND Toolkit, you can edit them by selecting the desired partition from the panels on the left or the right, depending on your bootloader, and the cache is just right below those panels.
Click to expand...
Click to collapse
can you give me more info please. I dont use the Nand toolkit were can i download it because all download links are down for the HD2 Toolkit. I dont now what file you mean
Slagers said:
can you give me more info please. I dont use the Nand toolkit were can i download it because all download links are down for the HD2 Toolkit. I dont now what file you mean
Click to expand...
Click to collapse
You'll find it here:
http://www.mediafire.com/?881bpw2xer88h23
Hi
During more than year of my "android on hd2 experience" I've had no problems at all. To be honest i became quite handy on this field.
recently I was using two roms daily HyperDroid-CM7 and testing NexusHD2-IceCreamSandwich Beta.
on NexusHD2 rom i install Data2SDInstaller.
and my problem started when I wanted to go back to HyperDroid.
boot animation stuck, of course i tried clk / magdlr different partition sizes always task29...without any effects. Now I tried NexusHD2 ICS 4.0.3 CM9 V1.0 , finally went through boot animation,when i saw Setup Wizard the messages appear immediately: "Unfortunetly, the process ....... has stopped" and when I click OK appears next and the next message , such as contacts, Email, calendar, etc. i thing all of the possible .. later message: Setup Wizard not responding.
And it happens on magdlr/300/5
I've read already about bad NAND blocks, and in recovery.log I did not detect any of them
I tried to run MTTY but I have a problem with drivers win7x64: - /
Does anyone know what's wrong with my HD2 and how to solve it.
you remembered to wipe the sd-ext partition and .android folder (cwm - wipe data / factory reset) right?
there are folders on both sd-ext and on the fat32 partition that will screw with new installs.
samsamuel said:
you remembered to wipe the sd-ext partition and .android folder (cwm - wipe data / factory reset) right?
there are folders on both sd-ext and on the fat32 partition that will screw with new installs.
Click to expand...
Click to collapse
Like he said, you need to wipe your sd card, ext and fat32. Both parts. This is majorly important since you used Apps 2SD!!
Another thing, I think your system size is way off. 200/5 for cLK if not 180/5 and for magldr probably like 200/44 but at least 10mb of cache..
I'm not too sure if this will help or not but this is my experience.
I have been on these forums for a while and using Hyperdroid for quite some time now as well. The reason why I do not have any posts on this account is because I switched over just today, my old account was imarte068.
When trying to update my Hyperdroid the other day through magdlr I encountered an issue. No matter the partition size or sd-card, it always managed to get stuck on boot. I got frustrated and attempted to re-flash countless times. After many attempts I gave up and just used an MIUI rom.
Several days later I devoted myself to solving the issue. After about an hour or so of trial and error I fixed it. I simply re-flashed the kernel after the installation of the rom. I am using magdlr therefore I do not know if the process will be the same for clk.
Hope I could be of help.
I thought it was a sdcard and i delete all partition and make it new.
I do always full wipe and dalvic...
QuRa said:
I thought it was a sdcard and i delete all partition and make it new.
I do always full wipe and dalvic...
Click to expand...
Click to collapse
Try re-flashing the kernel as I said in the post above.
Link to kernel here.
Hope I could be of help.
This may spur some argument, but in my experience task 29 is the key if you're having problems. many people say wipe with cwm the system boot davlik cache, etc but in my testing when I'm having a problem and need to solve it task 29 has been the answer almost everytime. Partition size is huge as well. Another thing if you were using apps2 SD on ics it was bugged. Without formatting your SD it is possible that it could bug your system.
Sent from my HD2 using xda premium
http://forum.xda-developers.com/showthread.php?t=1326217
In this thread you can find complete guide for install rom written by me. If that fails contact me for further solutions. Good Luck
kylew1212 said:
Like he said, you need to wipe your sd card, ext and fat32. Both parts. This is majorly important since you used Apps 2SD!!
Another thing, I think your system size is way off. 200/5 for cLK if not 180/5 and for magldr probably like 200/44 but at least 10mb of cache..
Click to expand...
Click to collapse
Im using 220 with 5mb cache. ICS running smooth without any problems. And no need to fully wipe sdcard. Would be stupid to delete the whole card just for flashing a new rom hehe. Its enough to wipe the (dalvik) cache and sd-ext partition via CWM.
For data2sd use the 'how to' from post #207 and the flashable file from post #174 in tytungs ics cm9 v1 thread. I think it removes old app2sd or data2sd scripts. Worked without any formatting of my sdcard.. works like a charm.
Btw.. ever tried to fix permissions? First thing you should try if you get FC.
Just do (re)install the rom like the guy in post #207 described but with the file from #174 (40ad2sdx-a2Recovery.zip)
And im using my hd2 now for more then one year. NEVER used task29.
Hf
Edit: btw for problems with your Usb? Driver on win7 machines try to install new version of WMDC (windows mobile device center)
Solved the problem for a friend
Sent from my NexusHD2
redplate said:
Im using 220 with 5mb cache. ICS running smooth without any problems. And no need to fully wipe sdcard. Would be stupid to delete the whole card just for flashing a new rom hehe. Its enough to wipe the (dalvik) cache and sd-ext partition via CWM.
For data2sd use the 'how to' from post #207 and the flashable file from post #174 in tytungs ics cm9 v1 thread. I think it removes old app2sd or data2sd scripts. Worked without any formatting of my sdcard.. works like a charm.
Btw.. ever tried to fix permissions? First thing you should try if you get FC.
Just do (re)install the rom like the guy in post #207 described but with the file from #174 (40ad2sdx-a2Recovery.zip)
And im using my hd2 now for more then one year. NEVER used task29.
Hf
Edit: btw for problems with your Usb? Driver on win7 machines try to install new version of WMDC (windows mobile device center)
Solved the problem for a friend
Sent from my NexusHD2
Click to expand...
Click to collapse
As I said people will disagree. I will say that in most cases you're right though, wiping the davlik cache is enough. I am just saying from my personal experience there are sometimes when it isn't (at least on my phone). I'm not trying to start an argument, I just want to help him.
Sent from my HD2 using xda premium
big thanks mates for advice.
So far I haven't had time for it but for sure tomorrow or on the weekend, I will deal with this and I will let you know how it goes.
In brief I run ICS all fine, but HyperDroid not starting.
Here is how i try:
________
Ok I was using WP7 and whats I made:
SD card: I delete all partition, I make only one Fat32 than in CWM I made ext partition.
Task29 > Clk 200/5 > recovery > install HyperDroid-CM7-v5.7.0 > And here phone stuck before boot animation, only white android robo > then as flamgodian advice I install kernel thins. > Same without boot animation.
Second try
Task29>clk 220/5>recovery>wipe(all possible)>install HyperDroid-CM7-v5.7.0>same robo>fix permision> install kernel this> I saw robo for 10s and phone self reboot after reboot > stuck :/
I have not seen even the boot animation.
Task29>clk 220/5>recovery>wipe(all possible)>install NexusHD2-ICS-CM9>Kernel>
He goes
__
I make like redplate(Big Thanks) write with installation 40ad2sdx, and everything runs great.
I will stay with ICS but it is strange why my phone doesn't like HyperDroid Rom.
And from here I would like to thank you all for advice.
I want to try a ROM which says:
Partition Layout (5/155/5) use hd2 toolkit
SDext: min. 500mb
I am not 100% sure what does it mean SDext is probably 500 ext patition bigger than 500
5/155/5 is
5 cashe
155 data and
5 WHAT????
Cant figure this out.
Thank you
Do you have any android rom installed? If yes, then you should (I had on every rom) have an option on reboot menu: reboot, recovery and BOOTLOADER - choose this one. And there you have SETTINGS->REPARTITION NAND and there set these ones your roms prefers. If you have not, then try to install this rom choosen by you, and maybe there will be option BOOTLOADER on menu. These are partitions, for example 155data(system) is space for system (I think). But standard settings are good for me and works with every rom.
[EDIT]
Try to boot phone by holding [back] nad [Power]. This opens bootloader and there you can set all.
Partition your nand using HD2 Nand Tookit.
First 5 is boot partition set to 5 by default
155 is system partition,
next 5 is cache size.
sdext partition can be set up from recovery (in cwm recovery go to advanced menu and select partition sd card), follow instructions for your rom. This can be used as if it was internal memory by your rom..
ALSO you might want to take a look HERE..
Edit: best to post any questions about any specific ROM in the ROM thread
This question was not "how-to", but more "what does 5/155/5 mean" type of question. Last time I played with internal memory of the device all I had to do was select the appropriate CWM version. This is why I asked here, I think it belongs, cos is general knowledge kind of thing.
I kind of dont see how to fiddle the size of /boot, no problems with /data and /cashe, but since you say this is default I wont have to, I suppose.
A few days ago I was pissed of by CyanogenMod (and stock Andriod in general), cos the only option to deal with Vcards is Handsend sms, but Handsend will not search for contacts correctly in Bulgarian (CYR) when installed on vanilla Android - small letters will not match capital and vice versa in contact names. This is why I decided to go for Sense - the message app is simply better...
Rather than using toolkit, download the CWM package and inside is a file called flash.cfg. Open this file and you should get this (maybe a different system or cache size)
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 150M
cache ya 5M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
5/155/5 is basically the middle three lines, i.e. 5Mb boot partition, 150Mb system partition and 5Mb cache partition. I don't know why chefs post it like this as I'm reasonably sure the boot is always 5Mb (I've never seen differently) so they could just post the system partition size (as quite a lot do). Hope this helps
shanman-2 said:
Partition your nand using HD2 Nand Tookit.
First 5 is boot partition set to 5 by default
155 is system partition,
next 5 is cache size.
sdext partition can be set up from recovery (in cwm recovery go to advanced menu and select partition sd card), follow instructions for your rom. This can be used as if it was internal memory by your rom..
ALSO you might want to take a look HERE..
Edit: best to post any questions about any specific ROM in the ROM thread
Click to expand...
Click to collapse
?????????!!!!!! ???
shanman-2 said:
?????????!!!!!! ???
Click to expand...
Click to collapse
mmmm which part for the "?????????!!!!!! ???" ?
! that bit
You can use CWM Recovery it's very easy to use for repartition your nand, but you must install MAGLDR or CLK first if you want go to recovery..
ariebower said:
You can use CWM Recovery it's very easy to use for repartition your nand, but you must install MAGLDR or CLK first if you want go to recovery..
Click to expand...
Click to collapse
Hm, this is something I missed!
1. I use mainly Ubuntu, hence I have have to rely on Wine or a pc I almost dont use for windows
2. I have CWM and MAGLDR installed
How to re-partition based on config file only? Can I do it?
Put the config where? (sdcard, ROM.zip)
Run what in CWM.
You would make my day, since I am away form how, with my laptop only, the ROM I run has a bug with wifi tether and I have to change it, but options are quite limited, since I dont know how to re-part, I have to choose ROMs that rely on system less or equal to 155 at teh moment. And I need a Sense, since others cant receive 100% vcards in Bulgarian (CYR)
deckoff said:
Hm, this is something I missed!
1. I use mainly Ubuntu, hence I have have to rely on Wine or a pc I almost dont use for windows
2. I have CWM and MAGLDR installed
How to re-partition based on config file only? Can I do it?
Put the config where? (sdcard, ROM.zip)
Run what in CWM.
You would make my day, since I am away form how, with my laptop only, the ROM I run has a bug with wifi tether and I have to change it, but options are quite limited, since I dont know how to re-part, I have to choose ROMs that rely on system less or equal to 155 at teh moment. And I need a Sense, since others cant receive 100% vcards in Bulgarian (CYR)
Click to expand...
Click to collapse
Maybe this thread will help you to do it without a PC