Database Users

[Q] Installing new ROM- NEED HELP

hey guys i dont wanna sound like a dumbass or anything
but ive been trying to install these two roms for a long tiime now and i just cant seem to get it done
if anyone would be kind enough to tell me like a step by step and what software i need to do it..IT WILL BE GREATLY APPRECIATED.
http://forum.xda-developers.com/showthread.php?t=1038694
http://forum.xda-developers.com/showthread.php?t=1112810
thanks alooooot guys and i appreciate it in advance.!

the first one is quite simple (i think you use winmo). download and unrar it.find the folder android and copy this folder to the root of your sd.then in phone explorer go to sd-find folder android-click clrcad then haret-you'll see something like 'starting linux'.it may take half an hour at the first loading.each time you reset you go to winmo,so in order to go to android you'll do clrcad-haret.
the second ron is a nand rom.for that you must wipe winmo.

i forgot winmo is windows mobile
im already on android running 2.3.3. with sense ..any way i can get these two roms to work through android?
please and thanks

please guys, if any of u could help ..im really tryina get at least one of these working. please and thanks

do you have mgldr in phone? i should also say that these roms aren't stable yet. their camcorder doesn't work properly and tyey have graphic glitches(whit horizontal stripes)

yeah thats what i read but i wanted to try either way
what could u suggest that has sense, and is something somewhat advance? 720p or 3d... and that new sense 3.0 lockscreen?
thanks mate!

http://forum.xda-developers.com/showthread.php?t=1075703
http://forum.xda-developers.com/showthread.php?t=1185087
i can say these two are the best as sense 3 roms.they record 720p but laggy and only can be watched by paid app vplayer.you can find necessary informations in their op. for sd rom you can use the one you mentioned in op.

im sorry to sound like an idiot again..
but how do i install these two? because im more familiar with the ZIP way ,where i just copy them to sd card..go to boot menu and load them
thank u again mate!

these are zip files. do you know how to make nand partition? if not download and install this tool. download the rom you choose and put to your sd. make an sd-ext partition of 1 gb in sd (if you don't have one).then ask again when you are ready.also say which rom you have chosen.
http://forum.xda-developers.com/showthread.php?t=1090783

I'm using the dungphp 2.0 ROM. Runs great except the camcorder lag. Scroll down just a bit on the page and they give you step-by-step directions.
http://forum.xda-developers.com/showthread.php?t=1075703&page=538

hoss93 said:
I'm using the dungphp 2.0 ROM. Runs great except the camcorder lag. Scroll down just a bit on the page and they give you step-by-step directions.
http://forum.xda-developers.com/showthread.php?t=1075703&page=538
Click to expand...
Click to collapse
do i download the MAGLDR version or the clk?

ehi , do you have mgldr or clk or none of them in your phone? restart your phone and hold down power key if you see mgldr menu then you have mgldr. if not then you have clk. control and inform.

mutil said:
ehi , do you have mgldr or clk or none of them in your phone? restart your phone and hold down power key if you see mgldr menu then you have mgldr. if not then you have clk. control and inform.
Click to expand...
Click to collapse
i got mgldr, i got it when i first flashed my phone from windows..
so is that mean i download the magldr version and just run it thru bootloader?

no in mgldr you dont use bootloader to flash rom.first download and install this tool to your pc http://forum.xda-developers.com/showthread.php?t=1090783
if you have an eu hd2 you should also have an sd-ext partition of at least 1 gb. meanwhile download mgldr version of the rom and be careful if it is eu or tmous.put it to your sd.when you complete these turn here again.

mutil said:
no in mgldr you dont use bootloader to flash rom.first download and install this tool to your pc http://forum.xda-developers.com/showthread.php?t=1090783
if you have an eu hd2 you should also have an sd-ext partition of at least 1 gb. meanwhile download mgldr version of the rom and be careful if it is eu or tmous.put it to your sd.when you complete these turn here again.
Click to expand...
Click to collapse
alright so i tried just loading it into bootloader, and it got stuck on the htc; quietly brilliant screen
now i got the hd2 toolkit.. what do u flash with it?

you can flash many things with it. now you'll make a nand partition. you didn't say but i think you have ah eu hd2 (512 mb). if not warn me. now connect your phone to pc. go to mgldr menu(i hope it still works) choose flasher.see usb flasher...usb.then in nand toolkit choose mgldr repartition-choose partition size 'custom'-choose cache size 5-at left bottom choose repartition.write 240 in the opening window.
after installation complete in mgldr menu choose ad recovery-install zip from sd-choose zip from sd-find your rom.zip. after installation is complete reboot.

nope i have a tmobile us hd2

i edited my former post according to tmous.follow and ask for help if you stuck.

this is what it says at the end in HD2 toolkit:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
and before that it said.. the program cant start because RAPI.dll is missing from ur computer. try reinstalling the program to fix this program.
help???

in mgldr menu(list with 12 choices) did you go to usb flasher choice

[Q] Black and white face is still on the screen

Hi all,
I have finished to install Android 2.3 with sence 3.5 on my HTC HD2, but, at me moment of the final reboot, the balck and white face of woman is still on my screen. I have waitted 2 hours, but this picture don't go. And I can't use my phone, because I can't do nothing!!
Please help me!!

yannick 1rst said:
Hi all,
I have finished to install Android 2.3 with sence 3.5 on my HTC HD2, but, at me moment of the final reboot, the balck and white face of woman is still on my screen. I have waitted 2 hours, but this picture don't go. And I can't use my phone, because I can't do nothing!!
Please help me!!
Click to expand...
Click to collapse
Don't leave it for too long because you may run it out of battery, and you'll end up having to cut open a USB cable to charge it again. You need to provide a tonne more information.
Have you got HSPL?
Have you got a .50 radio?
Which bootloader are you using?
What partition size are you using?
Which specific ROM are you using?

HSPL: yes
Radio: 2.15.50.14
Bootlaoder: MAGLDR
Partition size: (for 4Go card) 1rst partition 2,76 Go FAT32, 2nd 1 Go ext4
Rom: RUNNYMEDE 1.22.461.2 - Sense 3.5 [v2.5][MARC 0.1.6]
thx

yannick 1rst said:
HSPL: yes
Radio: 2.15.50.14
Bootlaoder: MAGLDR
Partition size: (for 4Go card) 1rst partition 2,76 Go FAT32, 2nd 1 Go ext4
Rom: RUNNYMEDE 1.22.461.2 - Sense 3.5 [v2.5][MARC 0.1.6]
thx
Click to expand...
Click to collapse
No as in partition in CWM

Where can I see it? I had just followed the steps and don't remenber this partition

But in the tuto, they have said that for this rom, we don't ave to change the partition. so I think (guess?) that partition is 175 M

yannick 1rst said:
But in the tuto, they have said that for this rom, we don't ave to change the partition. so I think (guess?) that partition is 175 M
Click to expand...
Click to collapse
Any sense ROM I've ever seen needed at very least 300M so change it to 300 and try that
Sent from my HTC HD2 using Tapatalk

How to change it please? can you help me? I'm inexperienced in this!

Just see this guide and you should be fine. In order to change the partition size, either use the HD2 Toolkit or do the following:
1. Open CWM folder
2. Open 'flash.cfg' in notepad
3. Edit the line 'system ya xxx M' to whatever the ROM you want specified.
4. Save the file
5. Run DAF.exe and flash it to your phone via USB flasher.

Thank you, I will try it and get back

Please how to go back? because mn phone is still freeze on the black and white face picture. I have changed the partition in the file "flash", but in DAFexe, it don't see my phone when I connect to the USB... (sorry for the english)

yannick 1rst said:
Please how to go back? because mn phone is still freeze on the black and white face picture. I have changed the partition in the file "flash", but in DAFexe, it don't see my phone when I connect to the USB... (sorry for the english)
Click to expand...
Click to collapse
Pull the battery? Don't tell me you actually left it on all this time. You do realise that in MAGLDR you can't charge the phone when it's off, right?

right! but when I pull the battery and put it, I have this message:
booting android from NAND
Android load at 18000000
from NAND
yaffs2 part is/ boot
load z Image
load initrd.gz
[K] 118000000:2219(?)4 1122000000:195756
load done!
123456
GO GO GO
and the B&W girl face appears! and don't moov until I pull the battery again, and when I put it, the same restarts!

yannick 1rst said:
right! but when I pull the battery and put it, I have this message:
booting android from NAND
Android load at 18000000
from NAND
yaffs2 part is/ boot
load z Image
load initrd.gz
[K] 118000000:2219(?)4 1122000000:195756
load done!
123456
GO GO GO
and the B&W girl face appears! and don't moov until I pull the battery again, and when I put it, the same restarts!
Click to expand...
Click to collapse
*sigh* please use some common sense at least. Hold down the power button to get into MAGLDR. TBH I'm rather surprised that you've managed to get even this far in flashing Android

Thank you very much! now I have android in my HD2

HTC HD 2 instalation problem..

Hi,i am reading this forum since april and i still can't install android on my HTC HD2.Can somebody support me on team viwer?
I will appreciate that.
Thanks

Banica Dardu said:
Hi,i am reading this forum since april and i still can't install android on my HTC HD2.Can somebody support me on team viwer?
I will appreciate that.
Thanks
Click to expand...
Click to collapse
The guides are really simple. All you need to do is read evrything carefully. All the steps are layed down and are very clear. Would u like me to reccomend a guide?
Sent from my HD2 using XDA

http://forum.xda-developers.com/showthread.php?t=. There you go. Read carefully
Sent from my HD2 using XDA

After instaling Task 29 with Radio 2.15.50.14 windows won't run.It say green HTC and don't startup.
Thanks a lot for **** up my phone ...
What i can do ?

download radio '2.15.50', the 'nand toolkit' and 'paranoidandroid' rom from android NAND section. (You can change later, i'm just keeping it simple.)
phone into bootloader (voldown and power)
connect USB
when the word 'serial' changes to 'USB' on phone screen, ,
run hspl4.exe and choose 2.08.hspl NOT 2.08.0000, it MUST be 2.08.hspl ONLY.
when phone reboots, hold voldown to return to bootloader
serial changes to --> USB
install the radio (either run the customRUU.exe that came with teh radio,
OR
in the nand tookit, at the bottom left ''browse|install RUU'' choose browse and find the radio file you downloaded (RUU_Signed.nbh probably) then click install RUU
when phone reboots, quickly hold voldown to return to bootlaoder
when serial --> USB
in the NAND tookit click 'install magldr'
when phone reboots, don't touch it, it will start the magldr menu. if it doesn't,. you probably skipped the radio step.
In the magldr menu choose USB flasher
in the nand toolkit at the top left make sure 'magldr repart' is selected, then below that click the 150 MB
below that type 5 in the cache size box
then in the bottom left click 'repartition'.
when phone reboots let it load the magldr menu,
choose option 8 - AD recovery - this will start clockworkmod
in the clockwork mod menu choose mounts and storage - mount sd card-
copy the paranoid android rom.zip (dont unzip it) to your sd card
(you can also do this through a card reader if you have one)
still in clockwork mod, press end to step back untill you see the 'install zip from sd ', select that, then 'choose zip from sd' , , find where you copied the rom to, select it, sit back, let it install, then choose reboot system now.
done.

zzz i'm newbie,it looks a bit hard....
Can u support me via Team viwer pls? ...ofc if u have time..

It can't be more simple.. You can also use HD2 Toolkit thread (with screenshots). Link in my signature.
Sent from my HTC HD2 using XDA App

If anybody can help me via Team Viwer i wait messages/PMs....
Thanks..

If you find a list of step by steps complicated, then no offence but you probably shouldn't be flashing.
Why not try SD Android?

I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...

Banica Dardu said:
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Click to expand...
Click to collapse
If you just read everything carefully you won't have any problems. As samsamuel said you can't get simpler than that and just use SD Android if you don't know what to do.
Sent from my NexusHD2 using XDA

Banica Dardu said:
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Click to expand...
Click to collapse
listen and read this CAREFULLY. In order to install android on your internal memory ie. NAND installation, you have to follow these steps,
1. Install HSPL 2.08
2. Install Radio 2.15
3. Install MAGLDR or clK ( BOOTLOADERS )
4. Install CWM(clockworkmod recovery)
5. Install the Rom via CWM
6. Voila
You can google how to do this. Flashing means installing(if you dont know)
This is a very simple guide which takes you through all the above steps and all files are available for download. READ READ and READ somemore
http://forum.xda-developers.com/showthread.php?p=11097380

Just a bity of help with installing the ROM on the HD2
adil1508 said:
listen and read this CAREFULLY. In order to install android on your internal memory ie. NAND installation, you have to follow these steps,
1. Install HSPL 2.08
2. Install Radio 2.15
3. Install MAGLDR or clK ( BOOTLOADERS )
4. Install CWM(clockworkmod recovery)
5. Install the Rom via CWM
6. Voila
You can google how to do this. Flashing means installing(if you dont know)
This is a very simple guide which takes you through all the above steps and all files are available for download. READ READ and READ somemore
http://forum.xda-developers.com/showthread.php?p=11097380
Click to expand...
Click to collapse
Sometimes you may run into strange problems when you install the ROM.
Therefore, my recommendation is after installing CWM do:
- Partition your HD2 (using HD2 Tool) 170 Mb (Custom) and 5 Mb Cache
- Copy your ROM to the SD Card (Using USB Mount in CWM)
- Flash your ROM using Choose ZIP from SD Card
- Waitn till it has finished
- FLASH YOUR ROM A SECOND TIME (This may solve written data to Bad Blocks)
- Do not reboot but go to Advanged in CWM and do Error Report
- Copy Recovery.log to your PC Using USB Mount and check this with your favourite Wordprocessor (eg. MS-Word) and look for errors
- if there are errors, try flash again of go back and create a bigger partition (5 Mb Increments will work)
- if OK, then reboot type your SIM/PIN ans leave the phone alone for 5 nimutes at least (all sorts of homekeeping going on)
- Log on using your Google account and after you finish, let the phone finish all synchronisations (may take 10 minutes)
- Then fix your Google Play and start installing apps.
Worked for me

utrecht56 said:
S........... my recommendation is after installing CWM do:
- Partition your HD2 (using HD2 Tool) 170 Mb (Custom) and 5 Mb Cache.
Click to expand...
Click to collapse
During the partitioning process is when CWM is installed, , partitioning wipes / resets the recovery partition, and loads cwm into it, so partitioning 'after' installing cwm is nonsensical.

I assume what you're essentially pointing out is that you have to select a partition size when installing CWM anyway so you may as well do it right the first time, right? Just wanted to clarify to anyone who was unsure of what this meant.
Sent from my NexusHD2 using XDA

yea. for most users, 'partitioning' and 'installing cwm' are the same step. Certainly for magldr, , , perhaps cLK is a little different, but i suspect anyone that knows how to apply cwm without repartitioning, how-to lists don't apply to. Anyone that needs a list, however, could do without teh confusaion of figuring out how to apply cwm and THEN partition.

[Q] Magldr isnt booting.

Hi,
I'm a little frustrated right now!
I want to install this ROM:
NexusHD2-JellyBean-4.1.2-CM10 V1.2
First problem:
I wasnt able to flash because my accept-softkey was broken.
New MMI-Board - check!
Now:
I had this ROM on my device again:
RUU_Leo_S_Vodafone_DE_3.14.162.5_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
(Installed via SD-Card)
--
SPL 3.03 --> SPL 3.03 HSPL - check!
Radio Rom --> Radio_2.15.50.14 - check!
Task 29 - check!
Want to install Magldr --> installed / reboot but stuck at the HTC screen
So - what did I wron till now?!
Or is there anything I could do?!
The 3-colours-screen says:
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
Cortulla HSPL 0x50
On the SD Card are:
1. LEOIMG.nbh (The Vodafone ROM)
2. NexusHD2-JellyBean-CM10_V1.2.zip
Thx in advance

try flash hspl2.08 and then flash magldr .I have forgotten if you need to set maldr space for install the rom.If it need keep follow the instructions on tytung's suggestion.And I think you have to give it 350mb space.
Sent from my HTC HD2 using xda app-developers app

Shefe91 said:
Hi,
I'm a little frustrated right now!
I want to install this ROM:
NexusHD2-JellyBean-4.1.2-CM10 V1.2
First problem:
I wasnt able to flash because my accept-softkey was broken.
New MMI-Board - check!
Now:
I had this ROM on my device again:
RUU_Leo_S_Vodafone_DE_3.14.162.5_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
(Installed via SD-Card)
--
SPL 3.03 --> SPL 3.03 HSPL - check!
Radio Rom --> Radio_2.15.50.14 - check!
Task 29 - check!
Want to install Magldr --> installed / reboot but stuck at the HTC screen
So - what did I wron till now?!
Or is there anything I could do?!
The 3-colours-screen says:
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
Cortulla HSPL 0x50
On the SD Card are:
1. LEOIMG.nbh (The Vodafone ROM)
2. NexusHD2-JellyBean-CM10_V1.2.zip
Thx in advance
Click to expand...
Click to collapse
Disclaimer: I am a cLK user so the information I provide may not be totally accurate or up to date.
Now that's out the way I believe your issue is HSPL 3.0.3. The OP of Magldr states you need HSPL 2.0.8. This is also stated in the HSPL Reference Thread. However I am aware that both threads are rather old, but I would try downgrading your HSPL to 2.0.8 and reinstalling magldr.

That was the reason!
Thank you guys
But what is 3.03.HSPL good for?!

needed for running 3.14 winmo roms on a regular hd2 (because 3.14 roms are very unstable if the spl ISNT 3.03 whn on regular hd2)

samsamuel said:
needed for running 3.14 winmo roms on a regular hd2 (because 3.14 roms are very unstable if the spl ISNT 3.03 whn on regular hd2)
Click to expand...
Click to collapse
Thank you!
It seems you know a lot about that topic - so may you can answer this question, too (everyone else can add a answer as well) - I would like how to set the values from this table:
misc ya 1M
recovery rrecov|ro|nospr 7M recovery_leo.img
boot yboot|ro 5M
system ya 220M
cache ya 2M
userdata ya|asize|hr allsize
(I am using magldr - and want to use the ROM (mentioned in the first post) as nativeSD
Where can I set this values?
I didnt found really helpful answers up to know

Shefe91 said:
Thank you!
It seems you know a lot about that topic - so may you can answer this question, too (everyone else can add a answer as well) - I would like how to set the values from this table:
misc ya 1M
recovery rrecov|ro|nospr 7M recovery_leo.img
boot yboot|ro 5M
system ya 220M
cache ya 2M
userdata ya|asize|hr allsize
(I am using magldr - and want to use the ROM (mentioned in the first post) as nativeSD
Where can I set this values?
I didnt found really helpful answers up to know
Click to expand...
Click to collapse
The easiest way is to download the HD2 NAND Toolkit, with which repartitioning is fairly self-explanatory. There are also guides in the OP of the link so I doubt you'll have any trouble using it.
Alternatively, you can do the following:
1. Download CWM from the original thread or from the NAND flashing guide in my sig
2. Open the CWM folder then find the file 'flash.cfg' (not flash.cfg.txt)
3. Open flash.cfg with Notepad
4. Edit it to be the same as you posted and save it
5. Boot into MAGLDR and go to USB flasher
6. Connect your phone to your PC and run the CWM installer.
In your post, it also says that you want to run the ROM as NativeSD. I don't know anything about NativeSD, but I thought that since it runs from the SD card it shouldn't require CWM partitoning? I think you're getting confused here between the instructions to flash NAND Android and the instructions for NativeSD. If someone knows otherwise, then please correct me since I don't want to be spreading incorrect info.

Thank you for the answer - i thought it might be possible to adjust the values anywhere in magldr - because with the NAND-Tool its just possible to take more or less values in 50's steps
Then the next thing with the adjustment with the flash.cfg was the \RSPL\RSPL.cpp (723) but I just had to get rid of a tick in activesync.
Lets see if its now working correctly -last time I installed Jelly Bean everytime i downloades something from the market it just rebootet ...
€: Its working (yay) - but I would still like to know the things

Shefe91 said:
Thank you for the answer - i thought it might be possible to adjust the values anywhere in magldr - because with the NAND-Tool its just possible to take more or less values in 50's steps
Click to expand...
Click to collapse
choose custom
Then the next thing with the adjustment with the flash.cfg was the \RSPL\RSPL.cpp (723) but I just had to get rid of a tick in activesync.
Lets see if its now working correctly -last time I installed Jelly Bean everytime i downloades something from the market it just rebootet ...
€: Its working (yay) - but I would still like to know the things
Click to expand...
Click to collapse

Shefe91 said:
Thank you!
It seems you know a lot about that topic - so may you can answer this question, too (everyone else can add a answer as well) - I would like how to set the values from this table:
misc ya 1M
recovery rrecov|ro|nospr 7M recovery_leo.img
boot yboot|ro 5M
system ya 220M
cache ya 2M
userdata ya|asize|hr allsize
(I am using magldr - and want to use the ROM (mentioned in the first post) as nativeSD
Where can I set this values?
I didnt found really helpful answers up to know
Click to expand...
Click to collapse
I don't think that you have enough space.I have tried 220.I start the system difficultly.And after start the system,the dev is laggy sometimes.And you can't restart it again.

wxl104 said:
I don't think that you have enough space.I have tried 220.I start the system difficultly.And after start the system,the dev is laggy sometimes.And you can't restart it again.
Click to expand...
Click to collapse
Yeah - you need 300. Then everything is fine - that was my problem first, too!
Everytime I downloaded something from the Playstore - reboot! now everything is cool
Thank you for the answer - i thought it might be possible to adjust the values anywhere in magldr - because with the NAND-Tool its just possible to take more or less values in 50's steps
choose custom
Click to expand...
Click to collapse
Yeah and when I choose this where do I set the values then?
& Is there really no option via magldr?
Btw. everything is fine right now - but I want still to know that stuff

You can't change the partition sizes from within MAGLDR, unfortunately. It's not so bad for someone like me who doesn't really flash ROMs too much, but for self-professed 'flashaholics' it's pretty annoying. If you really desperately need that function for whatever reason, you can flash cLK 1.5

Choose custom, and after you hit re partition a popup asks you what size. (does no one ever just try anything and see what happens nowadays;? ? )

Nigeldg said:
You can't change the partition sizes from within MAGLDR, unfortunately. It's not so bad for someone like me who doesn't really flash ROMs too much, but for self-professed 'flashaholics' it's pretty annoying. If you really desperately need that function for whatever reason, you can flash cLK 1.5
Click to expand...
Click to collapse
Thank you for that information but cLK and native-sd seems not to work so easily like magldr for me
& I do not change the ROMs that often that it would be annoying but it would have been pretty nice.
samsamuel said:
Choose custom, and after you hit re partition a popup asks you what size. (does no one ever just try anything and see what happens nowadays;? ? )
Click to expand...
Click to collapse
Ah, okay.
'nd no ... im not flashing that often and I dont want to do soemething really stupid :angel:

[Q] Change WP 7.8 to Android 4.2 on HD2

I have HTC HD2. I am non-technical but have succeeded in installing WP 7.8.
Can't handle this but am very comfortable with Android. Should have done this in the first place!
How can I remove WP and install Android 4.2 in a manner that takes advantage of the various preliminary procedures I carried out to install WP.
Many thanks for a solution. Step by step would be brilliant.

simple:
use NAND Toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
dont forget format SDcard... use https://www.sdcard.org/downloads/formatter_4/SDFormatter4exe.zip
in option select Format size adjustment to ON and format SDcard....
notice: if you used Yuki ROM (BTTF) Sdcard is locked and must unlock first before format... other WP7 ROM's not lock cards
use Task29 to erase NAND on HD2
install magldr
select system size partition (in every ROM description is mentioned recommended partition size)
put ROM on SDcard (in zip file)
boot to magldr
select adrecovery
if needed make ext partition on Sdcard
flash ROM...

brianew said:
I have HTC HD2. I am non-technical but have succeeded in installing WP 7.8.
Can't handle this but am very comfortable with Android. Should have done this in the first place!
How can I remove WP and install Android 4.2 in a manner that takes advantage of the various preliminary procedures I carried out to install WP.
Many thanks for a solution. Step by step would be brilliant.
Click to expand...
Click to collapse
1. Download and install HTC HD2 Toolkit: http://forum.xda-developers.com/showthread.php?t=1090783
2. Run the Toolkit, and click on Task29 (this will whipe your phone, all your data will be lost!)
3. Make sure you are using radio 2.15.50.14 (if you're not sure, just install it again)
4. Install MAGLDR 1.13
5. Install ClockworkMod Recovery (make sure you use the right partition size, check the page of the ROM you're gonna use)
6. Install the ROM of your choice!
If you want more detailed instructions, take a look here: CLICK, and start with Phase 2 (I take, since your used WP, that HSPL 2.08 is installed). Good luck!

Thank you dxdy
Very helpful.:good:

How to make a dual but vm7.8 and JB 4.2.2!?

Someone that can help me......
Monin' at all,
i have a big problem ( for me) and i need a help.
My HD2 (italia) was passed from W 6.5 to android many years ago and until yesterday on it there was a Langhtang rom .
Yesterday i hav put Win 7.8 but i see that have some problem and i prove to put another time Android.
Here born the problem.
I make:
1 task
2 radio
task
malgdr
exact partition ( for Lang rom)
put Lang rom in a NEW card SD
when i go to on
i see the the Malgdr screen but when i push ADRECOVERY ( to go in Recovery),
the phone goes in the next screen ( ...... go go go) ......and remains there until I touch the Fullscreen with finger.
After the recovery start, i put the rom, the rom goes but when the phone is switched off, if I press the button to turn it back on, it not turn on ( the screer remain like off),
until I touch the Fullscreen with finger.
Someone can help me? Tank's in advance.
Luci