Database Users

[26.03.12] THE ULTIMATE GUIDE FOR YOUR HTC HD2 -must read! --->ASK QUESTIONS HERE<---

[26.03.12] THE ULTIMATE GUIDE FOR YOUR HTC HD2 -must read! --->ASK QUESTIONS HERE<---
IF YOU HAVE ANY SUGGESTIONS ON SOMETHING ELSE I SHOULD ADD TO THE THREAD, PLEASE REPLY, AS I WANT THIS THREAD TO BE HELPFUL FOR EVERYONE, AND A THREAD WHERE PEOPLE CAN FIND THEIR ANSWERS, INSTEAD OF MAKING NEW THREADS ASKING THE SAME QUESTION.​
Hey guys. I have read alot of threads where people are having similar issues, which is actually really easy to fix. I'm not going to write 500 words explaining it.. Just follow those steps bellow
Fix most similar issues (CLEAN INSTALL):​
MAKE SURE YOU HAVE HSPL 2.08 http://forum.xda-developers.com/showthread.php?t=611433
Task 29 simply clears all the cache, data everything on your phone.. it makes your phone brand new.
1. download task 29 http://forum.xda-developers.com/showthread.php?t=644781
2. enter bootloader mode (hold volume down button while clicking on power button once) PS: make sure your phone is off.
3. install task 29
now you will have nothing on your phone.
4. install radio Leo_RADIO_2.15.50.14 http://forum.xda-developers.com/showthread.php?t=611787 (highly recommended rom for mostly nand roms)
You can now flash an android rom. (if you have to install it with cwm, look at the instructions below:
How to install CWM on MAGLDR (NOT CLK!)​First install magldr (run updateutility.exe as an admin) http://forum.xda-developers.com/showthread.php?t=893618
If you want to install Clockwork Mod download CWM. You will see 3 versions. 150mb, 250mb and 400mb. To know which one to flash, check what the chef of your android rom has written. If not, ask him
Download: http://forum.xda-developers.com/showthread.php?t=987531 (scroll down)
(make sure your phone is turned off) Turn on your phone. Hold down the power button untill you enter MAGLARD. CLick on usb flasher. Now right click on DAF.exe (clockworkmod) and run as an admin. After flash is done, you are ready to flash an android rom trough Clockworkmod. Go to ad recovery and install your rom
Clk and MAGLDR are differant bootloaders!​Clk:
- charge while phone is turned off
- better rom manager support
- faster bootup
- Open source
- PPP
Magldr:
-Wp7 support
-Rmnet
-Tetris Support
How to install CLK the professional way:​​download:
clk1.4_150mb (3).rar
cLK_recovery_3.0.2.5 (4).zip / recovery_3.2.0.0_leo.img is the newest recovery
fastboot drivers for manual installation (2).rar http://www.mediafire.com/download.php?3xbr1nqoonhkcrh
ALL THE DOWNLOAD LINKS, EXEPT FASTBOOT DRIVERS, ARE ATTACHED BELOW!
extract them all.
1. Now install clk 1.4 as you would install wm 6.5/task29 etc.
2. When that is done, you should see a code on your phone. Now install the fastboot drivers. (go to contol panel, drivers. You will see android with a yellow "!" there. Click on it, and choose install manually, the locate to fastboot drivers.rar and install it. (after the installation is done, you should see (fastboot processing commands on your phone)
3. Put the clk_recovery into the data.rar folder. Now hold "shift" on your keyboard, and right click no your mouse. Choose "open command prompt here". Now type in: fastboot flash recovery clk_recovery_3.0.2.5.img.
4. When the flash is done, type in fastboot reboot. NOW PRESS THE HOME BUTTON ON YOUR PHONE QUICKLY, and install the rom through CWM.
Sources: http://forum.xda-developers.com/showthread.php?t=901305
http://forum.xda-developers.com/showthread.php?t=987531
HOW TO INSTALL CLK, THE NEWB WAY ​​TOOLKITS (MAKES INSTALLiING CLK
MUCH MORE EASIER!
http://forum.xda-developers.com/showthread.php?t=1090783
(ClockWorkMod 3.2.0.0 Installer/Updater/Partitioner)
(new toolkit!) http://forum.xda-developers.com/showthread.php?t=1136644
Clk 5.x.x.x Fastboot commands:​
Code:
Fastboot command list and usage:
fastboot oem help
- This simple help
fastboot oem cls
- Clear screen
fastboot oem part-add name:size
- Create new partition with given name and size (in Mb, 0 for autosize all space)
- example: fastboot oem part-add system:160 - this will create system partition with size 160Mb
fastboot oem part-resize name:size
- Resize partition with given name to new size (in Mb, 0 for autosize all space
- example: fastboot oem part-resize system:150 - this will resize system partition to 150Mb
fastboot oem part-del name
- Delete named partition
fastboot oem part-create-default
- Delete curent partition table and create default one
fastboot oem part-read
- Reload partition layout from NAND
fastboot oem part-commit
- Save curent layout to NAND. All changes to partition layout are tmp. untill commited to nand!
fastboot oem part-list
- Display current partition layout
fastboot oem part-clear
- Clear current partition layout
fastboot oem format-all
- WARNING !!! THIS COMMAND WILL FORMAT COMPLETE NAND (except bootloader)\n - ALSO IT WILL DISPLAY BAD SECTORS IF THERE ARE ANY
- !!! THIS IS EQUIVALENT TO TASK 29 !!!
Remember to commit partition layout after you are satisfied with it !!!
GPS FIX​ - http://forum.xda-developers.com/showthread.php?t=953630
http://forum.xda-developers.com/showthread.php?t=1100114 (guaranteed working! got gps lock in 2 seconds)
To make the gps lock even faster, remember to edit the gps.conf file inside system/etc to the location where you live. You can find the ntp pool server from here:
http://www.pool.ntp.org/en/
check my sign for a guide with pics
Fix mini FC issues/wifi not working​Stuck at android screen or cm7 loading screen? try this:
At clockworkmod (option 8) wipe cache, factory reset, then go to advanced and wipe dalvik chache and battery stats, if it doesnt work, try to reinstall everything. (sometimes, just reinstalling the rom works) + MAKE SURE YOU ARE USING THE RIGHT CLOCKWORKMOD, IF NOT YOU HD2 WILL BE STUCK AT ANDROID SCREEN,,,,,,, if you dont have the right radio, it will be stuck at htc screen.
If you get : nand kernel open failed, make sure you are trying to install a MAGLDR rom and not a CLK ROM
If your wifi is not working, do a task29, then wipe cache/data/dalvik cache from cwm. Then reinstall the rom.
to fix wifi issue, try wiping cache and dalvik cache, flash the kernel and fix permissions. You can also try to replace the wpa_suppliciant from your rom.
Nand USB Init Failed on MAGLDR​Try this: http://forum.xda-developers.com/showthread.php?t=895655
If that doesn't work, make sure you are running DAF.exe as an admin
Fix robotic voice issue:​1. First solution, disable “Audible touch tones” from the “Sound Settings” menu(just uncheck the box) and reboot your phone. (Note: Disable it right after you flash a new ROM and reboot, that way your phone system will remember it.) So, no more Robo Voice for you.
2. Second solution, while you experienced the Robotic-Voice call, enable the loud speaker, and disable it. You will have no more Robotic-Voice until your next boot.
How to fix robotic voice sound issue
How to fix the 2 seconds delay issue​Head over to this thread: http://forum.xda-developers.com/showthread.php?t=1222427
confirmed working on many people, (mostly magldr), worked on me (I'm usng Clk) (update [Sep] WWORKING ON ALL AUO SCREENS!)
HOW TO FIX RANDOMLY REBOOTING ISSUE!​Go to settings - Wireless & Networks - Mobile Networks - Network operators, search for operators, then choose your operator.
Ever since android nand came out, I had randomly reboots, after doing this, it never happened again.
It can also happen because of under/overvolting.
I HAVE TRIED EVERYTHING, BUT NOTHING WORKS!!​ok, try this
- Download a stock Rom from htc.com
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
(after it is done, install hspl 2.08, radio 2.15, clk/magldr, and from cwm wipe data/cache/dalvik cache)
(http://forum.xda-developers.com/showthread.php?t=609477)
My Icons are to small!​Locate to system using root explorer. Open build.prop, and edit the lcd density. 240 is normal. You can do this before flashing a rom too.
My battery life is so bad/ I want more RAM!!!
​Try to remove the widgets you are not using.
Dont use live wallpapers.
Dont turn on wifi/gps/cellular data/bluetooth unless you need it!
-------------------------------------------------------------------------------------------------------------------------------------
Recommended gingerbread 2.3/2.4 roms:
TyphooN CyanogenMod
HyperDroid-CM7
NexusHD2-Gingerbread (no cyanogenmod)
HyperDroidGBX
Recommended sense roms:
HD2 CoreDroid HD
CMYLXGOs Stock Desire HD
RAFDROID HD
Extra info:
Save battery while running ANY Android build
How to Install NAND Android on HTC HD2 w ClockWorkMod Recovery
The Definitve Guide To Android On HTC HD2
RAM, Speed ,Battery SAVE,NO HOME REFRESH, Tweaks for CM7 HTC HD2 2.3.4
HD2 Android NAND Development - Sticky Roll-Up Thread
​I hope this fixes your issues.
Feel free to ask questions
I'm not responsable for any damage on your device. ^^ and if you want cookies, go buy it.... duuh

Radio Install is not needed Task29 does not remove your Radio,SPL,or Splash Screen.

Maybe you can also explain how dalvic and other caches do work in magldr?
Seems the OP's love the CWM and are developing more and more that way.

wrecless said:
Radio Install is not needed Task29 does not remove your Radio,SPL,or Splash Screen.
Click to expand...
Click to collapse
Yes, I know that, but radio 2.15 is recommended by alot of chefs.. That's why I included it in my post.

thanks a lot man. task29 helped me with installing a clean Android build after I had set up dual boot to WP7 & SD Android and wanted to go back to Android

aditya_r12 said:
thanks a lot man. task29 helped me with installing a clean Android build after I had set up dual boot to WP7 & SD Android and wanted to go back to Android
Click to expand...
Click to collapse
I'm glad to hear that

Hey! Very good thread! I have a question, i have a ROM but i want change this ROM to another. How do i do? Thank You very much!

yz.hd said:
Task 29 simply clears all the cache, data everything on your phone.. it makes your phone brand new.
download task 29 http://forum.xda-developers.com/showthread.php?t=644781
Click to expand...
Click to collapse
Hey. I cant do that because i have this error:
ERROR [260]: CONNECTION

Rafa1986 said:
Hey. I cant do that because i have this error:
ERROR [260]: CONNECTION
Click to expand...
Click to collapse
anyone please? i have my mobile phone connected with my pc. Thank You.

Rafa1986 said:
anyone please? i have my mobile phone connected with my pc. Thank You.
Click to expand...
Click to collapse
Do you have Activesync ? if you dont, uninstall and isntall again. then try. You have hspl right ?

Rafa1986 said:
Hey! Very good thread! I have a question, i have a ROM but i want change this ROM to another. How do i do? Thank You very much!
Click to expand...
Click to collapse
You want to install a custom rom? like android.. or a normal rom ?

GPS issues on all roms
Do you know if it fixes some issues like the GPS making the screen freeze and the phone lock up? My roms are running well, I only have that problem when I use GPS.
P.S.: I've already configured the gps.config for my location (Brazil) and the GPS is finding the satellites very fast but the it make the phone crashes very often

Hi, great thread! Thanks for the info.
I have a question about the SD-card. Is it necessary to format the card before installing a ROM? And if so what format (FAT32 or..)?

Thanks and regards but what problems that requires this meathod to be fixed

Thanks for the info.

metalican said:
Hi, great thread! Thanks for the info.
I have a question about the SD-card. Is it necessary to format the card before installing a ROM? And if so what format (FAT32 or..)?
Click to expand...
Click to collapse
No, it isn't. If you do, FAT32 works fine

Digital Outcast said:
No, it isn't. If you do, FAT32 works fine
Click to expand...
Click to collapse
+1 to that

hoss_n2 said:
Thanks and regards but what problems that requires this meathod to be fixed
Click to expand...
Click to collapse
phone randomly reboots, laggy phone, stuffs not working etc.

SonyGlamber said:
Do you know if it fixes some issues like the GPS making the screen freeze and the phone lock up? My roms are running well, I only have that problem when I use GPS.
P.S.: I've already configured the gps.config for my location (Brazil) and the GPS is finding the satellites very fast but the it make the phone crashes very often
Click to expand...
Click to collapse
happened to me to, but i changed my rom, it's not happening anymore something in the rom you are using may cause your phone crash when you use your gps. Maybe you should ask the chef of the rom if the issue is familiar, and if it is a fix for it ?

yz.hd said:
happened to me to, but i changed my rom, it's not happening anymore something in the rom you are using may cause your phone crash when you use your gps. Maybe you should ask the chef of the rom if the issue is familiar, and if it is a fix for it ?
Click to expand...
Click to collapse
Which Rom are you using?

Bootloops again and again with every Rom I use

Hello Android user
First off all, sorry to bother you with this problem but I already used Google and the searchengine but I wasn't able to find a solution.
I have the HTC hd2 nand flashed with the newest maglrd version. (I am completely new in this scene)
I had Android 2.3.4 installed when I bought this phone but I wished to have an Android with HTC sense so I downloaded an nand Rom for hd2 but it was no use, I got always those screen freezes (boot loops) , till I took an autoinstaller from dark force team and know I am still messing up with a bad moddet 2.2 rom, could someone write an step by step tutorial for me?
I want to get 2.3.4 again (in the best case with sense)
I found a lot of other tuts but I can't understand the meaning of the steps because I am an noob, a tutorial for dummy would be great, I would really appreciate it !
Thanks a lot for reading my thread.
-Zakkusu
Sent from my HTC HD2 using XDA App

you must repartition your nand according to the needs of the rom.at first page of android nand thread there is hd2 nand tool kit dowload it. connect your phone to pc-in mgldr menu choose usb flasher-see usb flasher....usb-in toolkit choose appropriate partition sizes then click repartition. in addition if you are an eu hd2 user you should have sd-ext partition for sense roms.ifyou stuck ask again

Thanks Pal, I will try it !
Sounds pretty easy, I will contact you, if I stuck on my effort, but thanks for the
hint
Awesome !

Zakkusu said:
Thanks Pal, I will try it !
Sounds pretty easy, I will contact you, if I stuck on my effort, but thanks for the
hint
Awesome !
Click to expand...
Click to collapse
Yeah AOSP roms (CM7, etc) use much smaller partitions than Sense roms. For example with a TMOUS HD2 a AOSP rom like Typhoon uses roughly 130mb system partion wheras a Sense rom use 390-400mb partition. If you do not change this and try to flash a Sense rom then you are essentially running out of space before the rom can be fully installed, ergo the bootloop.
Like the previous poster said, check the first page of each rom you download as they usually tell you what size partition to use. Some will even have a daf.exe file for you to flash the appropriate partion & recovery.
Good luck

Hay guys, thanks for your adives but it was no use, I still get those damn loops,
could anyone give me his instant messanger adress, so he could guide me through the installation.
I am pretty dessperate

In your opening post you say "screen freezes(bootloops)"
Which is it? Freezing or looping? Cos they're two different things.
Looping is often associated with power problems such as a bent battery pin, whilst freezing could be not clearing the data/cache/sdext partition, or overheating, (amongst various others)

Important Notice: If you were given a direct link to this post, edit step #8 and choose a ROM you prefer from the NAND sub-forum and edit step #11 and enter the values you get from the ROM's thread/OP.
HD2 Android NAND for dummies:
1-This tutorial assumes that you have HSPL already installed, your device is connected to your pc and you have the latest drivers, please carry on.
1a- Fully Charge your phone (use external charger, or manage yourself!)
2- Go to ksubedi's Thread and download his HD2 NAND Toolkit (thanks ksubedi!)
3- After Installing it, Power Off your device (HD2) and power on into bootloader mode (Power on while Holding Volume down)
4- After seeing ("Serial" changed to "USB") on your phone, run the toolkit with Administrator rights (default).
5-(Optional) From bottom right corner choose "Wipe (Task29)", go through the steps and when your device reboots go into bootloader again (Volume Down and Power On).
6- Choose from bottom right corner "Install MAGLDR", go through the process and when your phone restarts hold the power button (not the volume!)
7- MAGLDR Screen will appear, Go down (using volume rockers) to Option 5. USB Flasher and wait for it to say "wait USB".
8- Go to Tyween's Thread and download his ROM (Thanks tyween)
**8- Typhoon is a CM7 build not sense (Sense takes more NAND Space and can be somewhat laggy and slow )
9-After Downloading the MAG Build, put the ZIP file on your sd card and put it into your phone.
10- On the toolkit, from the top panel choose "MAGLDR Repartition" and from the left panel choose 150mb system partition and from the bottom set the cache size to 5mb then click on repartition and go through it.
11- Reboot your phone into MAGLDR screen (by holding the Power on button)
11-a (Optional) if you think you may need extra storage for your apps/games, create an ext3 or ext4 partition on your sdcard using Easeus Partition Manager on your PC.
12- Go to Option 8.Android Recovery (Using volume rockers) and hit the Green Button (Dial Button) to go to recovery.
13- A Black screen with orange/blue text will show up (This is recovery) go to "Install Zip from sd card" And then choose the second option then choose your recently downloaded ROM and hit green button, now look at step 13a before confirming, then hit yes.
13a- If you chose to create an ext partition on your sdcard in step 11-a, don't forget to either a-select NAND with DataOnExt when installing the ROM. (If supported by ROM) or b-flash an a2sd script after flashing the ROM immediately.
14-a Now it will begin the flashing process, just wait for it.
14-b when it finish, simply choose "Reboot system now" and let the device boot into Android.
14-c After the device has booted, dont touch your phone but let it initialize for at least 3 minutes before using it.
Is this what you asked for?
Please read the following F.A.Q before sending me any PMs or making a post!
F.A.Q:
Q: What do you mean by drivers in step #1?
A: Read this short post.
Q: In step #1, you say "HSPL". What is that? And how do I install it?
A: Read this.
Q: In step #7 my device never says "wait USB"?
A: Sometimes, it may be connected without "wait USB" appearing. You can try to continue without waiting for it. But if the flashing fails, you need to check your steps.
Q: I cannot find the MAG build for the ROM I want?
A: Recently, they have been combining both cLK and MAGLDR into one zip. If the developer doesn't mention cLK or MAGLDR, it's a universal zip so download it and install it.
Q: When installing the ROM, I was asked to use "PPP or RMNET". Which one do I choose?
A: Choose RMNET. (You can choose PPP, but it drops sometimes).
Q: I did all the steps but I am stuck in a bootloop, what do I do?
A: It could be anything, but mostly bad blocks. Increase the system partition by ~20MB.
Q: The ROM I want to use says "SD-EXT" or "EXT partition" is required. What does that mean?
A: It means step 11a is mandatory for you.

Thanks a lot Marvlesz, you really made my day haha
I am fastin because of ramadan and when everyone is eating at shool I just play around with my phone, you realy helped me out of this mess !
Ramadan Kareem Bro!
PS: an very very easy tutorial, very simple, make a thread out of it with some pictures, everyyone would love it

Zakkusu said:
Thanks a lot Marvlesz, you really made my day haha
I am fastin because of ramadan and when everyone is eating at shool I just play around with my phone, you realy helped me out of this mess !
Ramadan Kareem Bro!
PS: an very very easy tutorial, very simple, make a thread out of it with some pictures, everyyone would love it
Click to expand...
Click to collapse
Haha !! it's 2 AM here , 1 hour left before we fast
I'm really glad that I helped you, and there are "simple, easy" tutorials floating everywhere, I dont think another one is essential

too big partition possible? Problems with Pyramid.
RAFdroid works perfect on my HD2 EU. Nand partition is 400.
When I try to install one of the available Pyramid ROMS, they all keep repeating the white/green "quietly brilliant" screen (One time I let it for 2 hours, but no effect). Is this because I did not change the NAND partition? It's bigger than needed. In recovery I allways do factory reset and whipe Dalvik cache.

change your nand partition.because it is much more bigger than the rom wants and this may cause problem.

Changing the NAND partition was the solution. Why do they use such a small partition in NAND, and such a big one on SD. Is the remaining NAND still in use for something?

Could some one of you recommond a android rom with 2.3.x with htc sense
like an htc desire hd rom!

http://forum.xda-developers.com/showthread.php?t=1075703
http://forum.xda-developers.com/showthread.php?t=1185087

awesome, thanks buddy !

Hello fellaz !
Could you post like Marvlesz an tutorial for android roms with sense, I want to install ths rom so bad: http://forum.xda-developers.com/showthread.php?t=1185087
I did what the tutorial asked for but I got again an bootloop with the black htc logo -.-
-salam

1-have you wiped data/factory reset in ad recovery
2-do you have sd-ext partition in sd card
3-have you made 5-160-5 nand partition
4-have you downloaded the right file(mgldr-clk)

Can you explain this "2-do you have sd-ext partition in sd card" to me?
And yes, I downloaded the magldr version pal
- salam

Zakkusu said:
Can you explain this "2-do you have sd-ext partition in sd card" to me?
And yes, I downloaded the magldr version pal
- salam
Click to expand...
Click to collapse
the rom you have chosen doesnt boot without an sd-ext partition.this procedure will erase your sd.so make a backup to pc.this can be done at pc but i try to teach doing it at mgldr.in mgldr menu go to:ad recovery-advanced-partition sd card-2048m(since this rom is big i recommend this)-then 0 as swap(i use 128m to support ram but you shuld know that swap may harm your sd). now put your backup to sd:in mgldr ad recovery-mounts and storage-mount usb storage now your pc will see your sd.

Thanks a lot !
Could you be so kind and write the tutorial just like Marvlesz ?
(You can almost copy the biggest part from him)
It would help me a lot !
EDIT:
Here I go, I finally made it, to understand the how to's,
My Tutorial is for this ROM >>KLICK<< (Thanks Langthang)
(a big part is from Marvlesz, thanks Bro )
1-This tutorial assumes that you have HSPL already installed, your device is connected to your pc and you have the latest drivers, please carry on.
1a- Fully Charge your phone (use external charger, or manage yourself ! )
2-Go to ksubedi's Thread and download his HD2 NAND Toolkit (thanks ksubedi!)
3- After Installing it, Power Off your device (HD2) and power on into bootloader mode (Power on while Holding Volume down)
4- After seeing ("Serial" changed to "USB") on your phone, run the toolkit with Administrator rights (default).
5- From bottom right corner choose "Wipe (Task29)", go through the steps and when your device reboots go into bootloader again (Volume Down and Power On).
6- Choose from bottom right corner "Install MAGLDR", go through the process and when your phone restarts hold the power menu (not the volume !)
7- MAGLDR Screen will appear, Go down (using volume rockers) to Option 4. USB Flasher and wait for it to say "wait USB".
8- Download the Recovery Mode Link download newest Recovery 3.0.2.4: (thanks seadersn)
http://www.mediafire.com/?f81pamq6fbjmtw5
9- Extract the folder and open "flash" (open it with notepad)
10- Make this changes:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 160M
cache ya 5M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
(Its nearly the same text, only the numbers are different and if not you opened the wrong "flash.cfg".
11- Go now to your phone, in the mgldr menu and choose the USB-Flasher menu and wait (5 seks.)
12 - Open now with the admin rights "DAF" (RIGHT CLICK AND OPEN AS ADIMIN!! otherwise it will not work)
13- go now to Recovery Mode in your phone and open advanced
14- Choose Wipe Dalvik Cache
15- go to Paritition SD Card and Choose 2048MB and 0 MB (you can choose also 128MB to support your RAM but it can woope your sd cards ass up ! (thanks to mutil)
16- Go now back with the arrow button on the buttom of your phone and choose "install zip. from sdcard".
17- choose know "choose zip from sdcard)
18- choose know your zip. and wait for the construktions in the rom !
And start enjoying your ROM !
thanks to all for your teaching !
selam aleykum.
PS: Ramadan Kareem @all

[Q] Installing new ROM- NEED HELP

hey guys i dont wanna sound like a dumbass or anything
but ive been trying to install these two roms for a long tiime now and i just cant seem to get it done
if anyone would be kind enough to tell me like a step by step and what software i need to do it..IT WILL BE GREATLY APPRECIATED.
http://forum.xda-developers.com/showthread.php?t=1038694
http://forum.xda-developers.com/showthread.php?t=1112810
thanks alooooot guys and i appreciate it in advance.!

the first one is quite simple (i think you use winmo). download and unrar it.find the folder android and copy this folder to the root of your sd.then in phone explorer go to sd-find folder android-click clrcad then haret-you'll see something like 'starting linux'.it may take half an hour at the first loading.each time you reset you go to winmo,so in order to go to android you'll do clrcad-haret.
the second ron is a nand rom.for that you must wipe winmo.

i forgot winmo is windows mobile
im already on android running 2.3.3. with sense ..any way i can get these two roms to work through android?
please and thanks

please guys, if any of u could help ..im really tryina get at least one of these working. please and thanks

do you have mgldr in phone? i should also say that these roms aren't stable yet. their camcorder doesn't work properly and tyey have graphic glitches(whit horizontal stripes)

yeah thats what i read but i wanted to try either way
what could u suggest that has sense, and is something somewhat advance? 720p or 3d... and that new sense 3.0 lockscreen?
thanks mate!

http://forum.xda-developers.com/showthread.php?t=1075703
http://forum.xda-developers.com/showthread.php?t=1185087
i can say these two are the best as sense 3 roms.they record 720p but laggy and only can be watched by paid app vplayer.you can find necessary informations in their op. for sd rom you can use the one you mentioned in op.

im sorry to sound like an idiot again..
but how do i install these two? because im more familiar with the ZIP way ,where i just copy them to sd card..go to boot menu and load them
thank u again mate!

these are zip files. do you know how to make nand partition? if not download and install this tool. download the rom you choose and put to your sd. make an sd-ext partition of 1 gb in sd (if you don't have one).then ask again when you are ready.also say which rom you have chosen.
http://forum.xda-developers.com/showthread.php?t=1090783

I'm using the dungphp 2.0 ROM. Runs great except the camcorder lag. Scroll down just a bit on the page and they give you step-by-step directions.
http://forum.xda-developers.com/showthread.php?t=1075703&page=538

hoss93 said:
I'm using the dungphp 2.0 ROM. Runs great except the camcorder lag. Scroll down just a bit on the page and they give you step-by-step directions.
http://forum.xda-developers.com/showthread.php?t=1075703&page=538
Click to expand...
Click to collapse
do i download the MAGLDR version or the clk?

ehi , do you have mgldr or clk or none of them in your phone? restart your phone and hold down power key if you see mgldr menu then you have mgldr. if not then you have clk. control and inform.

mutil said:
ehi , do you have mgldr or clk or none of them in your phone? restart your phone and hold down power key if you see mgldr menu then you have mgldr. if not then you have clk. control and inform.
Click to expand...
Click to collapse
i got mgldr, i got it when i first flashed my phone from windows..
so is that mean i download the magldr version and just run it thru bootloader?

no in mgldr you dont use bootloader to flash rom.first download and install this tool to your pc http://forum.xda-developers.com/showthread.php?t=1090783
if you have an eu hd2 you should also have an sd-ext partition of at least 1 gb. meanwhile download mgldr version of the rom and be careful if it is eu or tmous.put it to your sd.when you complete these turn here again.

mutil said:
no in mgldr you dont use bootloader to flash rom.first download and install this tool to your pc http://forum.xda-developers.com/showthread.php?t=1090783
if you have an eu hd2 you should also have an sd-ext partition of at least 1 gb. meanwhile download mgldr version of the rom and be careful if it is eu or tmous.put it to your sd.when you complete these turn here again.
Click to expand...
Click to collapse
alright so i tried just loading it into bootloader, and it got stuck on the htc; quietly brilliant screen
now i got the hd2 toolkit.. what do u flash with it?

you can flash many things with it. now you'll make a nand partition. you didn't say but i think you have ah eu hd2 (512 mb). if not warn me. now connect your phone to pc. go to mgldr menu(i hope it still works) choose flasher.see usb flasher...usb.then in nand toolkit choose mgldr repartition-choose partition size 'custom'-choose cache size 5-at left bottom choose repartition.write 240 in the opening window.
after installation complete in mgldr menu choose ad recovery-install zip from sd-choose zip from sd-find your rom.zip. after installation is complete reboot.

nope i have a tmobile us hd2

i edited my former post according to tmous.follow and ask for help if you stuck.

this is what it says at the end in HD2 toolkit:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
and before that it said.. the program cant start because RAPI.dll is missing from ur computer. try reinstalling the program to fix this program.
help???

in mgldr menu(list with 12 choices) did you go to usb flasher choice

[Q] Some noob questions before flashing, again

Hey, i flashed my HTC HD2 some months ago.
I used the nexus-hd2 gingerbread build but this one is already outdatet (gingerbread 2.3.3...) and i want something new
Ive decided to try out this rom http://forum.xda-developers.com/showthread.php?t=769026
Ive read the Steps how to proceede
1. Install HSPL 2.08 onto your device by following the directions in that thread or by watching the above video.
2. Install the newest version of MAGLDR. Unzip the file into a folder on your desktop for easy access. With the phone off Power up your device by holding the volume down button and red power button at the same time. You should see a rainbow colored screen as shown in the video above. RIGHT Click the ROMUpdateUtility.exe file and "Run as Administrator". Follow the on screen instructions. When the process is finished your phone should now boot into MAGLDR with a Kernel failed to load error.
3. Download the appropriate ClockWorkMod 150MB file from HERE. Extract this file into a folder on your desktop in preparation. On the Phone select the option 5. USB Flasher using the Volume Down hardkey and press the Green Send button to confirm. Connect the phone to your PC with USB cable and wait until it says USB connected. Go to your ClockWorkMod folder and RIGHT CLICK on the DAF.exe file and "Run as Administrator". Follow the on screen instructions. **If you want the newest version of CWM before flashing the above file, CLICK HERE and follow the instructions.
4. You now have all the tools to install HyperDroid on your device. Insert your SD card into a card reader and connect to your PC. Copy the MAGLDR version zip of the ROM to the root of the card. DO NOT USE MAGLDR USB MASS STORAGE TO TRANSFER ROM FILES IT CAN CORRUPT THEM. Place the SD card back into your phone and press and HOLD the power button until the MAGLDR menu appears again. Select option 9. AD Recovery. Select the option "install zip from sdcard" with the volume up/down keys and confirm with green send button. Choose the ROM file and press the Green button. Scroll down to YES and press the Green button. Wait. You have successfully installed the awesomeness that is HyperDroid onto your Device.
5. For future use when upgrading versions. ClockWorkMod's NANDROID BACKUP IS YOUR FRIEND PLEASE USE IT BEFORE FLASHING ANYTHING NEW TO YOUR DEVICE. The "wipe data/factory reset" option in ClockWorkMod will completely reset or (Full Wipe) your device. You still need to go to the "advanced" option and "Wipe Dalvik Cache" as well. If you are trying to keep your data just choose the two options "wipe cache partition" from the main menu and "wipe dalvik cache" option from the advanced menu, then install the new version with "install zip from sd card".
Click to expand...
Click to collapse
My first question: I read in the thread that this instructions are made for a
This guide is assuming you have a completely stock HTC HD2 running Windows Mobile 6.5.
Click to expand...
Click to collapse
So: do i have to flash first back to the stock rom? If yes, would you be so kind to give me a link?
i really searched but didnt rly found something.
I have a 512 EU HTC HD2 (and the Problem is, im not sure which rom i should use because i bought the cell phone directly, not from a provider, so which provider should i choose?) (im confused because the roms allways have a name like ...E-Plus, O² so im not sure which to use.
1. HSPL 2.08 is already installed.
2. Magladr 1.33 is also already installed
3. Is mostly clear (when i installed the rom i currently use, no cwm was required)
4. Does that mean, that i must have a card reader? because i have no one So can i not install the rom?
The instruction to copy the magldr build zip to the root.. is the root the "highest" folder/layer like in a tree?(i think so?)
But before i do this. Have i to format the SD card fist? if yes, which format?
5. have i to use this backup utility or is it "just" recommended
Thanks in advance,
regards Helgon

Helgon2000 said:
Hey, i flashed my HTC HD2 some months ago.
I used the nexus-hd2 gingerbread build but this one is already outdatet (gingerbread 2.3.3...) and i want something new
Ive decided to try out this rom http://forum.xda-developers.com/showthread.php?t=769026
Ive read the Steps how to proceede
My first question: I read in the thread that this instructions are made for a
So: do i have to flash first back to the stock rom? If yes, would you be so kind to give me a link?
i really searched but didnt rly found something.
I have a 512 EU HTC HD2 (and the Problem is, im not sure which rom i should use because i bought the cell phone directly, not from a provider, so which provider should i choose?) (im confused because the roms allways have a name like ...E-Plus, O² so im not sure which to use.
1. HSPL 2.08 is already installed.
2. Magladr 1.33 is also already installed
3. Is mostly clear (when i installed the rom i currently use, no cwm was required)
4. Does that mean, that i must have a card reader? because i have no one So can i not install the rom?
The instruction to copy the magldr build zip to the root.. is the root the "highest" folder/layer like in a tree?(i think so?)
But before i do this. Have i to format the SD card fist? if yes, which format?
5. have i to use this backup utility or is it "just" recommended
Thanks in advance,
regards Helgon
Click to expand...
Click to collapse
you don't need to get a stock rom as you already have hspl2.08 and magldr 1.13,i'd suggest downloadin xda apk,then you can download a rom,it'll save to ur sd card(as u dnt have a reader),get recovery 5.0.2.6,then u should be good to go without any probs

Hey. thnaks for your awsner but what ist this xda apk and what recovery?
regards helgon
edit: i just watched a howo install cwm video and in this the guy booted into magldr, selected usb connection and then copied the rom files to the root. is this right? why do i need then a card reader?
edit2: and in the video the guy just copied the "boot" folder from the rom (contains initrd.zip and zImage). why just this folder. do you have maybe a link to a video wheres explained how to install cwm (maybe also the rom then).
EDIT 3 : Haha.. yes edit3
ive got the idea that my laptop has n card reader and i have and micro sd to sd adapter.. what a coicidence
so. my single last question is: do i have to format my sd card first? (and if yes, what format). do i have to copy all files from the HyperDroid-CM7-Killer-Koala-v5.5.2-magldr-signed.zip or the whole zip file?
regards

So, to rephrase the edits:
My last questions are:
- Do I have to format my SD Card(if yes - which format?) before i install the CWM and then the new ROM (is it recommended?)
- I want to use this ROM http://forum.xda-developers.com/showthread.php?t=769026 HyperDroid-CM7-Killer-Koala-v5.5.2-magldr-signed.zip. Do I need to copy the whole zip file or just the exported files to the root?
Regards

push thread

formatting sd is recommended but not necessary.just in ad recovery 'wipe data factory reset'
you must put the rom.zip to sd ,dont extract it. you can put it using your usb connection.
your present cwr partition goes well with hyperdroid too. but flashing a new cwr each time is recommended strongly.

worked perfect, thank you guys <3 *nohomo*

[GUIDE] Install MaGLDR 1.13, ClockworkMod Recovery and MIUI ROM for HD2

Hi, I've been having some trubles to find the way to first, update MaGLDR to 1.13, then install ClockworkMod Recovery and finally MIUI ROM. First I googled how to update MaGLDR to 1.13, but I couldn't follow the directions I found on the original thread, I didn't had ActiveSync. So I'm writing this thead so if someone has the same problems as I had, I hope this can help someone. And if you want to install any other ROM, this may be usefull too. I find the ROM installation from Recovery easier and faster then installing it by RUU, but, that's my opinion.
I want to make clear that all the files on this post are not my work, I just uploaded again, so you can find anything you need on this same post. I'll upload the MIUI ROM for HD2 too, I just want to add, that I rather this ROM for HD2 beacause it is very light and fast, but that's just my opinion too.
Before we begin, make sure your HD2 battery is at least 50% charge. So, let's begin.
Updating MaGLDR to 1.13 version
Downloads
MaGLDR v1.13
http://forum.xda-developers.com/attachment.php?attachmentid=1553616&stc=1&d=1355196631
As I mentioned it, my problem was to stablish an ActiveSync connection with the PC, so to solve that I've conected my HD2 on boot mode.
1. Connect your HD2 on boot mode(holding volume down key + Power button).
2. Wait for Windows to install drivers
3. Decompress the content of the file above on an empty folder
4. Rigth click on the ROMUpdateUtility.exe file and select Run as Administrator
5. Click the check box and click next, and repeat
6. Your phone will show a screen saying HTC with a progress bar for a little while, once it finishes it will restart, hold the power button so it shows the MaGLDR menu options, the option AD Recovery should be on the menu, and there you got, you just updated MaGLDR to 1.13 version.
Installing ClockworkMod Recovery
Before you choose which file to download here is an explanation from the original thread.
Q. I dont know which partition size to download
A. Depending on what type of roms you plan on using, you should choose the partition size based on the following.
150MB Partition - For bare roms including CyanogenMod, AOSP, and MiUI
250MB Partition - For Standard sense roms including Desire and EVo based ROMs, can also be used for some squashed HD builds
400MB Partition - For Larger roms including unsquashed Desire HD and Z roms, ROMs REQUIRE data2sd for EU HD2 with 512MB NAND
Downloads
Recovery v1.3 150MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553658&stc=1&d=1355196154
Recovery v1.3 250MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553671&stc=1&d=1355196518
Recovery v1.3 400MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553673&stc=1&d=1355196627
1. Turn on your phone and hold Power button until MaGLDR menu shows up
2. Select USB Flasher option and press Send(Green button)
3. Wait for windows to install drivers
4. Decompress the content of the file you choose to download on an empty folder and right click on the DAF.exe file and click Run as Administrator
5. Wait until the program detects the phone and follow the instructions until the program has finished
6. Detach the phone and turn it on and hold Power button so you can access to the MaGLDR menu
7. Select the AD Recovery option and you'll see the Recovery menu
Installing MIUI ROM
Personaly I like to create a SD partition, so here are the steps once you are into the Recovery
1. Select advanced click Send
2. Select Partition SD Card
3. Select the size of the Ext partition
4. Select the size of the swap file
5. Select Yes
Downloads
MIUI ROM Android HD2 2.4.20
http://www.mediafire.com/download.php?w6ul6y9cne5yhvc
1. Download the zip file to your SD ROM, do not decompress and insert your SD card in your phone
2. Turn on your phone into MaGLDR menu, select AD Recovery option and press Send
3. Select install zip from sdcard
4. Select choose zip from sdcard
5. Select the miuiandroid_HD2-2.4.20.zip
6. Select Yes and wait for the installation to end
7. Select reboot system now and wait for your phone to start, the forst time it takes a few minutes and there you got.
This may be a little repetitive, may be you can find some more information on other posts, but this is my first one and I just want to help because I tryed two days to figure out how to flash my HD2 and maybe this post will help someone to don't take that much time on searching. So thanks anyway

sharedito said:
Hi, I've been having some trubles to find the way to first, update MaGLDR to 1.13, then install ClockworkMod Recovery and finally MIUI ROM. First I googled how to update MaGLDR to 1.13, but I couldn't follow the directions I found on the original thread, I didn't had ActiveSync. So I'm writing this thead so if someone has the same problems as I had, I hope this can help someone. And if you want to install any other ROM, this may be usefull too. I find the ROM installation from Recovery easier and faster then installing it by RUU, but, that's my opinion.
I want to make clear that all the files on this post are not my work, I just uploaded again, so you can find anything you need on this same post. I'll upload the MIUI ROM for HD2 too, I just want to add, that I rather this ROM for HD2 beacause it is very light and fast, but that's just my opinion too.
Before we begin, make sure your HD2 battery is at least 50% charge. So, let's begin.
Updating MaGLDR to 1.13 version
Downloads
MaGLDR v1.13
http://forum.xda-developers.com/attachment.php?attachmentid=1553616&stc=1&d=1355196631
As I mentioned it, my problem was to stablish an ActiveSync connection with the PC, so to solve that I've conected my HD2 on boot mode.
1. Connect your HD2 on boot mode(holding volume down key + Power button).
2. Wait for Windows to install drivers
3. Decompress the content of the file above on an empty folder
4. Rigth click on the ROMUpdateUtility.exe file and select Run as Administrator
5. Click the check box and click next, and repeat
6. Your phone will show a screen saying HTC with a progress bar for a little while, once it finishes it will restart, hold the power button so it shows the MaGLDR menu options, the option AD Recovery should be on the menu, and there you got, you just updated MaGLDR to 1.13 version.
Installing ClockworkMod Recovery
Before you choose which file to download here is an explanation from the original thread.
Q. I dont know which partition size to download
A. Depending on what type of roms you plan on using, you should choose the partition size based on the following.
150MB Partition - For bare roms including CyanogenMod, AOSP, and MiUI
250MB Partition - For Standard sense roms including Desire and EVo based ROMs, can also be used for some squashed HD builds
400MB Partition - For Larger roms including unsquashed Desire HD and Z roms, ROMs REQUIRE data2sd for EU HD2 with 512MB NAND
Downloads
Recovery v1.3 150MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553658&stc=1&d=1355196154
Recovery v1.3 250MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553671&stc=1&d=1355196518
Recovery v1.3 400MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553673&stc=1&d=1355196627
1. Turn on your phone and hold Power button until MaGLDR menu shows up
2. Select USB Flasher option and press Send(Green button)
3. Wait for windows to install drivers
4. Decompress the content of the file you choose to download on an empty folder and right click on the DAF.exe file and click Run as Administrator
5. Wait until the program detects the phone and follow the instructions until the program has finished
6. Detach the phone and turn it on and hold Power button so you can access to the MaGLDR menu
7. Select the AD Recovery option and you'll see the Recovery menu
Installing MIUI ROM
Personaly I like to create a SD partition, so here are the steps once you are into the Recovery
1. Select advanced click Send
2. Select Partition SD Card
3. Select the size of the Ext partition
4. Select the size of the swap file
5. Select Yes
Downloads
MIUI ROM Android HD2 2.4.20
http://www.mediafire.com/download.php?w6ul6y9cne5yhvc
1. Download the zip file to your SD ROM, do not decompress and insert your SD card in your phone
2. Turn on your phone into MaGLDR menu, select AD Recovery option and press Send
3. Select install zip from sdcard
4. Select choose zip from sdcard
5. Select the miuiandroid_HD2-2.4.20.zip
6. Select Yes and wait for the installation to end
7. Select reboot system now and wait for your phone to start, the forst time it takes a few minutes and there you got.
This may be a little repetitive, may be you can find some more information on other posts, but this is my first one and I just want to help because I tryed two days to figure out how to flash my HD2 and maybe this post will help someone to don't take that much time on searching. So thanks anyway
Click to expand...
Click to collapse
I got error in connection (through ActSync,) what is the solution. i have installed HTCSync but it doesnt detect my device.
Device Info :
Model No : T-Mobile_LEO
Platform : PocketPC
Radio : 2.10.50.26
OS : 5.2.21892
Protocol : 15.39.50.07U
What to do ?????

Easy WAY
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....

No problem
Django64 said:
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....
Click to expand...
Click to collapse
No problem, I made this post log time ago, but I'm glad to know at least it helped. And lol, I have parts of HD2 too, I am now on a i777, so let's see how it goes

Santbohara said:
I got error in connection (through ActSync,) what is the solution. i have installed HTCSync but it doesnt detect my device.
Device Info :
Model No : T-Mobile_LEO
Platform : PocketPC
Radio : 2.10.50.26
OS : 5.2.21892
Protocol : 15.39.50.07U
What to do ?????
Click to expand...
Click to collapse
Well, sorry for taking so long to reply, but your problem seemed to lay on te cable cord o maybe on you Bootloader version, I don't remember well enoght to say exactli whats your problem. Sorry

Well ...
Django64 said:
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....
Click to expand...
Click to collapse
sharedito said:
No problem, I made this post log time ago, but I'm glad to know at least it helped. And lol, I have parts of HD2 too, I am now on a i777, so let's see how it goes
Click to expand...
Click to collapse
Well ... Dear Friend ... I'm Sure you missed Something so lets check This :
1- The Windows Should be XP ( If have 7 You need To install active sync and HTC Drivers To make the "Serial" ( In boot loader ) cange ino "USB")
2- Try HD2Toolkit ( thanks to @ksubedi )To install any Of MAGLDR or CLK
..: Good Luck :..
With Best Wishes
Hitman1376​

Thanks
hitman1376 said:
Well ... Dear Friend ... I'm Sure you missed Something so lets check This :
1- The Windows Should be XP ( If have 7 You need To install active sync and HTC Drivers To make the "Serial" ( In boot loader ) cange ino "USB")
2- Try HD2Toolkit ( thanks to @ksubedi )To install any Of MAGLDR or CLK
..: Good Luck :..
With Best Wishes
Hitman1376​
Click to expand...
Click to collapse
Maybe I missed about HD2Toolkit, but the steps I wrote, I executed them on Windows 7 and it all worked perfectly several times, and yet indeed you need either the drivers, that I downloaded throught Windows Update, or ActiveSync from the HTC webpage, or you can just google them, but I agree on the fact that Windows XP is better when flashing any device, and HD2Toolkit, if you can get your hands on it, is a very useful set of tools, depending on what you want to do
Thanks a lot Hitman1376

Glad to hear that ...
sharedito said:
Maybe I missed about HD2Toolkit, but the steps I wrote, I executed them on Windows 7 and it all worked perfectly several times, and yet indeed you need either the drivers, that I downloaded throught Windows Update, or ActiveSync from the HTC webpage, or you can just google them, but I agree on the fact that Windows XP is better when flashing any device, and HD2Toolkit, if you can get your hands on it, is a very useful set of tools, depending on what you want to do
Thanks a lot Hitman1376
Click to expand...
Click to collapse
Gladt to know I could help ... Was my duty ... Good luck
With Best Wishes
Hitman1376​

I installed this MAGLDR (it says aMAGLDR v1.13 at the top), but cannot set AD SD dir, when I go to Services->BootSettings, highlight 3. AD SD Dir and press left button (Green?) it goes straight to MAGLDR home, giveing me no option to choose folder.
Partitions on my SD card:
1. Unallocated - 8MB
2. FAT32 - 17,2GB
3. Ext4 - 1GB
4. Ext4 - 4.1GB
5. Unformatted - 7GB
If I understand right it should see 2 as /sdcard and (after flash of Android) - 3 as /system and 4 as /data?
Forgot setting FAT32 as primary... idiot...