Database Users

[26.03.12] THE ULTIMATE GUIDE FOR YOUR HTC HD2 -must read! --->ASK QUESTIONS HERE<---

[26.03.12] THE ULTIMATE GUIDE FOR YOUR HTC HD2 -must read! --->ASK QUESTIONS HERE<---
IF YOU HAVE ANY SUGGESTIONS ON SOMETHING ELSE I SHOULD ADD TO THE THREAD, PLEASE REPLY, AS I WANT THIS THREAD TO BE HELPFUL FOR EVERYONE, AND A THREAD WHERE PEOPLE CAN FIND THEIR ANSWERS, INSTEAD OF MAKING NEW THREADS ASKING THE SAME QUESTION.​
Hey guys. I have read alot of threads where people are having similar issues, which is actually really easy to fix. I'm not going to write 500 words explaining it.. Just follow those steps bellow
Fix most similar issues (CLEAN INSTALL):​
MAKE SURE YOU HAVE HSPL 2.08 http://forum.xda-developers.com/showthread.php?t=611433
Task 29 simply clears all the cache, data everything on your phone.. it makes your phone brand new.
1. download task 29 http://forum.xda-developers.com/showthread.php?t=644781
2. enter bootloader mode (hold volume down button while clicking on power button once) PS: make sure your phone is off.
3. install task 29
now you will have nothing on your phone.
4. install radio Leo_RADIO_2.15.50.14 http://forum.xda-developers.com/showthread.php?t=611787 (highly recommended rom for mostly nand roms)
You can now flash an android rom. (if you have to install it with cwm, look at the instructions below:
How to install CWM on MAGLDR (NOT CLK!)​First install magldr (run updateutility.exe as an admin) http://forum.xda-developers.com/showthread.php?t=893618
If you want to install Clockwork Mod download CWM. You will see 3 versions. 150mb, 250mb and 400mb. To know which one to flash, check what the chef of your android rom has written. If not, ask him
Download: http://forum.xda-developers.com/showthread.php?t=987531 (scroll down)
(make sure your phone is turned off) Turn on your phone. Hold down the power button untill you enter MAGLARD. CLick on usb flasher. Now right click on DAF.exe (clockworkmod) and run as an admin. After flash is done, you are ready to flash an android rom trough Clockworkmod. Go to ad recovery and install your rom
Clk and MAGLDR are differant bootloaders!​Clk:
- charge while phone is turned off
- better rom manager support
- faster bootup
- Open source
- PPP
Magldr:
-Wp7 support
-Rmnet
-Tetris Support
How to install CLK the professional way:​​download:
clk1.4_150mb (3).rar
cLK_recovery_3.0.2.5 (4).zip / recovery_3.2.0.0_leo.img is the newest recovery
fastboot drivers for manual installation (2).rar http://www.mediafire.com/download.php?3xbr1nqoonhkcrh
ALL THE DOWNLOAD LINKS, EXEPT FASTBOOT DRIVERS, ARE ATTACHED BELOW!
extract them all.
1. Now install clk 1.4 as you would install wm 6.5/task29 etc.
2. When that is done, you should see a code on your phone. Now install the fastboot drivers. (go to contol panel, drivers. You will see android with a yellow "!" there. Click on it, and choose install manually, the locate to fastboot drivers.rar and install it. (after the installation is done, you should see (fastboot processing commands on your phone)
3. Put the clk_recovery into the data.rar folder. Now hold "shift" on your keyboard, and right click no your mouse. Choose "open command prompt here". Now type in: fastboot flash recovery clk_recovery_3.0.2.5.img.
4. When the flash is done, type in fastboot reboot. NOW PRESS THE HOME BUTTON ON YOUR PHONE QUICKLY, and install the rom through CWM.
Sources: http://forum.xda-developers.com/showthread.php?t=901305
http://forum.xda-developers.com/showthread.php?t=987531
HOW TO INSTALL CLK, THE NEWB WAY ​​TOOLKITS (MAKES INSTALLiING CLK
MUCH MORE EASIER!
http://forum.xda-developers.com/showthread.php?t=1090783
(ClockWorkMod 3.2.0.0 Installer/Updater/Partitioner)
(new toolkit!) http://forum.xda-developers.com/showthread.php?t=1136644
Clk 5.x.x.x Fastboot commands:​
Code:
Fastboot command list and usage:
fastboot oem help
- This simple help
fastboot oem cls
- Clear screen
fastboot oem part-add name:size
- Create new partition with given name and size (in Mb, 0 for autosize all space)
- example: fastboot oem part-add system:160 - this will create system partition with size 160Mb
fastboot oem part-resize name:size
- Resize partition with given name to new size (in Mb, 0 for autosize all space
- example: fastboot oem part-resize system:150 - this will resize system partition to 150Mb
fastboot oem part-del name
- Delete named partition
fastboot oem part-create-default
- Delete curent partition table and create default one
fastboot oem part-read
- Reload partition layout from NAND
fastboot oem part-commit
- Save curent layout to NAND. All changes to partition layout are tmp. untill commited to nand!
fastboot oem part-list
- Display current partition layout
fastboot oem part-clear
- Clear current partition layout
fastboot oem format-all
- WARNING !!! THIS COMMAND WILL FORMAT COMPLETE NAND (except bootloader)\n - ALSO IT WILL DISPLAY BAD SECTORS IF THERE ARE ANY
- !!! THIS IS EQUIVALENT TO TASK 29 !!!
Remember to commit partition layout after you are satisfied with it !!!
GPS FIX​ - http://forum.xda-developers.com/showthread.php?t=953630
http://forum.xda-developers.com/showthread.php?t=1100114 (guaranteed working! got gps lock in 2 seconds)
To make the gps lock even faster, remember to edit the gps.conf file inside system/etc to the location where you live. You can find the ntp pool server from here:
http://www.pool.ntp.org/en/
check my sign for a guide with pics
Fix mini FC issues/wifi not working​Stuck at android screen or cm7 loading screen? try this:
At clockworkmod (option 8) wipe cache, factory reset, then go to advanced and wipe dalvik chache and battery stats, if it doesnt work, try to reinstall everything. (sometimes, just reinstalling the rom works) + MAKE SURE YOU ARE USING THE RIGHT CLOCKWORKMOD, IF NOT YOU HD2 WILL BE STUCK AT ANDROID SCREEN,,,,,,, if you dont have the right radio, it will be stuck at htc screen.
If you get : nand kernel open failed, make sure you are trying to install a MAGLDR rom and not a CLK ROM
If your wifi is not working, do a task29, then wipe cache/data/dalvik cache from cwm. Then reinstall the rom.
to fix wifi issue, try wiping cache and dalvik cache, flash the kernel and fix permissions. You can also try to replace the wpa_suppliciant from your rom.
Nand USB Init Failed on MAGLDR​Try this: http://forum.xda-developers.com/showthread.php?t=895655
If that doesn't work, make sure you are running DAF.exe as an admin
Fix robotic voice issue:​1. First solution, disable “Audible touch tones” from the “Sound Settings” menu(just uncheck the box) and reboot your phone. (Note: Disable it right after you flash a new ROM and reboot, that way your phone system will remember it.) So, no more Robo Voice for you.
2. Second solution, while you experienced the Robotic-Voice call, enable the loud speaker, and disable it. You will have no more Robotic-Voice until your next boot.
How to fix robotic voice sound issue
How to fix the 2 seconds delay issue​Head over to this thread: http://forum.xda-developers.com/showthread.php?t=1222427
confirmed working on many people, (mostly magldr), worked on me (I'm usng Clk) (update [Sep] WWORKING ON ALL AUO SCREENS!)
HOW TO FIX RANDOMLY REBOOTING ISSUE!​Go to settings - Wireless & Networks - Mobile Networks - Network operators, search for operators, then choose your operator.
Ever since android nand came out, I had randomly reboots, after doing this, it never happened again.
It can also happen because of under/overvolting.
I HAVE TRIED EVERYTHING, BUT NOTHING WORKS!!​ok, try this
- Download a stock Rom from htc.com
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
(after it is done, install hspl 2.08, radio 2.15, clk/magldr, and from cwm wipe data/cache/dalvik cache)
(http://forum.xda-developers.com/showthread.php?t=609477)
My Icons are to small!​Locate to system using root explorer. Open build.prop, and edit the lcd density. 240 is normal. You can do this before flashing a rom too.
My battery life is so bad/ I want more RAM!!!
​Try to remove the widgets you are not using.
Dont use live wallpapers.
Dont turn on wifi/gps/cellular data/bluetooth unless you need it!
-------------------------------------------------------------------------------------------------------------------------------------
Recommended gingerbread 2.3/2.4 roms:
TyphooN CyanogenMod
HyperDroid-CM7
NexusHD2-Gingerbread (no cyanogenmod)
HyperDroidGBX
Recommended sense roms:
HD2 CoreDroid HD
CMYLXGOs Stock Desire HD
RAFDROID HD
Extra info:
Save battery while running ANY Android build
How to Install NAND Android on HTC HD2 w ClockWorkMod Recovery
The Definitve Guide To Android On HTC HD2
RAM, Speed ,Battery SAVE,NO HOME REFRESH, Tweaks for CM7 HTC HD2 2.3.4
HD2 Android NAND Development - Sticky Roll-Up Thread
​I hope this fixes your issues.
Feel free to ask questions
I'm not responsable for any damage on your device. ^^ and if you want cookies, go buy it.... duuh

Radio Install is not needed Task29 does not remove your Radio,SPL,or Splash Screen.

Maybe you can also explain how dalvic and other caches do work in magldr?
Seems the OP's love the CWM and are developing more and more that way.

wrecless said:
Radio Install is not needed Task29 does not remove your Radio,SPL,or Splash Screen.
Click to expand...
Click to collapse
Yes, I know that, but radio 2.15 is recommended by alot of chefs.. That's why I included it in my post.

thanks a lot man. task29 helped me with installing a clean Android build after I had set up dual boot to WP7 & SD Android and wanted to go back to Android

aditya_r12 said:
thanks a lot man. task29 helped me with installing a clean Android build after I had set up dual boot to WP7 & SD Android and wanted to go back to Android
Click to expand...
Click to collapse
I'm glad to hear that

Hey! Very good thread! I have a question, i have a ROM but i want change this ROM to another. How do i do? Thank You very much!

yz.hd said:
Task 29 simply clears all the cache, data everything on your phone.. it makes your phone brand new.
download task 29 http://forum.xda-developers.com/showthread.php?t=644781
Click to expand...
Click to collapse
Hey. I cant do that because i have this error:
ERROR [260]: CONNECTION

Rafa1986 said:
Hey. I cant do that because i have this error:
ERROR [260]: CONNECTION
Click to expand...
Click to collapse
anyone please? i have my mobile phone connected with my pc. Thank You.

Rafa1986 said:
anyone please? i have my mobile phone connected with my pc. Thank You.
Click to expand...
Click to collapse
Do you have Activesync ? if you dont, uninstall and isntall again. then try. You have hspl right ?

Rafa1986 said:
Hey! Very good thread! I have a question, i have a ROM but i want change this ROM to another. How do i do? Thank You very much!
Click to expand...
Click to collapse
You want to install a custom rom? like android.. or a normal rom ?

GPS issues on all roms
Do you know if it fixes some issues like the GPS making the screen freeze and the phone lock up? My roms are running well, I only have that problem when I use GPS.
P.S.: I've already configured the gps.config for my location (Brazil) and the GPS is finding the satellites very fast but the it make the phone crashes very often

Hi, great thread! Thanks for the info.
I have a question about the SD-card. Is it necessary to format the card before installing a ROM? And if so what format (FAT32 or..)?

Thanks and regards but what problems that requires this meathod to be fixed

Thanks for the info.

metalican said:
Hi, great thread! Thanks for the info.
I have a question about the SD-card. Is it necessary to format the card before installing a ROM? And if so what format (FAT32 or..)?
Click to expand...
Click to collapse
No, it isn't. If you do, FAT32 works fine

Digital Outcast said:
No, it isn't. If you do, FAT32 works fine
Click to expand...
Click to collapse
+1 to that

hoss_n2 said:
Thanks and regards but what problems that requires this meathod to be fixed
Click to expand...
Click to collapse
phone randomly reboots, laggy phone, stuffs not working etc.

SonyGlamber said:
Do you know if it fixes some issues like the GPS making the screen freeze and the phone lock up? My roms are running well, I only have that problem when I use GPS.
P.S.: I've already configured the gps.config for my location (Brazil) and the GPS is finding the satellites very fast but the it make the phone crashes very often
Click to expand...
Click to collapse
happened to me to, but i changed my rom, it's not happening anymore something in the rom you are using may cause your phone crash when you use your gps. Maybe you should ask the chef of the rom if the issue is familiar, and if it is a fix for it ?

yz.hd said:
happened to me to, but i changed my rom, it's not happening anymore something in the rom you are using may cause your phone crash when you use your gps. Maybe you should ask the chef of the rom if the issue is familiar, and if it is a fix for it ?
Click to expand...
Click to collapse
Which Rom are you using?

[Guide][Updated]What is HSPL, MAGLDR, cLK, and CWM, and how to install them.?

What is HSPL, MAGLDR , cLK, and Clock Work Mod Recovery and how do you use them?​
First off I want to take time to thank XDA senior members Cotulla and Bepe and the whole Dark Forces Team for creating HSPL and MAGLDR. Also I want to thank XDA senior member Cedesmith for his cLK bootloader for Android and XDA senior member RaiderX303 for creating Clock Work Mod Recovery . With out these programs for the HD2 it would never have reached the legendary status it has reached.
This is not a guide on how to install/flash a NAND Android ROM or how to install/flash Windows Phone 7 on the HTC HD2. This guide is meant to help educate people on what these tools are, what their function is, and how to install them on the HTC HD2.
If you are looking for a guide on how to install a NAND Android ROM on the HTC HD2 then go here or here for NAND Android guides. For a guide on how to install Windows Phone 7 on the HTC HD2 go here. Thanks to senior XDA member MSkip, junior member Gunjahman, and member Omarza for the guide. Thanks to senior member Darrengladysz for the dual booting WP7 and Android guide that is linked in descriptiion of option #2 of MAGLDR. Thanks to senior member MysticGenuis for the MTTY guide I linked in option #6 of MAGLDR.
Edit, I added radio info and a warning to TMOUS users at the bottom of post #3. Also be sure to checkout the all in one flashing/installing tool by XDA Recognized Developer ksubedi.
HD2 NAND Toolkit​
Also check out XDA Senior Member kevin134's Step by step toolkit for NANDroid.
Easy Android
HSPL what is that and why do I need it?​
On the HD2 it comes stock with what is called SPL which stands for Secondary Program Loader. SPL is paired with the IPL(Initial Program Loader) to make the bootloader of the HD2 and other smartphones and PDA devices. The bootloader is the first thing to load up on your HD2 when it is turned on. It boots up the device hardware and other things into memory before the ROM starts. The bootloader also allows the flashing of a new ROM, splash screens, and radio versions to the device. The SPL and IPL that make up the bootloader are much like the BIOS of your computer and can be modified.
With that being said HSPL stands for Hard Secondary Program Loader. HSPL is a modified bootloader that disables the CID check that is run at the start of a ROM flash so you can flash official ROMs without having to use a Gold Card. It also disables the NBH signature check that is run when you flash a ROM so you can flash a unsigned /custom ROM image or any other unsigned NBH file like MAGLDR or cLK. HSPL does not get over written like SPL does when flashing a signed NBH that contains a SPL via RUU. This translates to HSPL does not get over written when you flash a official ROM via USB. HSPL makes flashing a little safer too as it reduces the chances of bricking your HD2 by flashing the wrong SPL version. It does not help protect against bricking a HD2 from flashing a wrong radio version.
Important!​
If you have a TMOUS HTC HD2 you only flash HSPL 2.08 or 3.03 to your HD2. If you have a international HTC HD2 with 448MB of ram and want to flash a 3.14 based Windows Mobile ROM. You need to flash HSPL 3.03 as 3.14 ROMs on a international HTC HD2 require SPL 3.03.0000 or HSPL 3.03 are you will have problems with your HD2 not functioning properly Plus it is one of the two requirements to unlocking the extra RAM for your HD2, the other is a radio version 2.07.50.xx or up.
So that should help you understand what HSPL is and why you need it. My sources for this information is the [HSPL/HSPL2] HowTo flash everythingand the XDA Wiki glossary.
How to Flash HSPL to your HTC HD2​
To install any SPL or HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
First go to here to download HSPL 4. I suggest HSPL 4 because it supports all SPL versions that are out right now including SPL 3.03.0000 and SPL 3.10.0000. Remember you can also use HSPL 4 to flash back to your original SPL. Once you have HSPL 4 downloaded use a zip program like WinZip, WinRar, or Win7 to extract the .exe file for the DFT installation utility to a location of your choosing on you computer. Take and put your HD2 manually into bootloader by holding the volume down button down while powering on your HD2. When you see the multicolor bootloader screen on your HD2 connect it to your computer via USB cable. If it is the first time you have connected it to your computer while in bootloader you will have to give it a minute or two for the drivers to install. When you see the Serial in the white bar of bootloader change to USB you have a HTC USB Sync connection between your HD2 and your computer. This is very important, make sure you have the latest ActiveSync or Windows Mobile Device Center version (depending on what version of Windows your computer uses) installed on your computer as it has the updated USB drivers for the HTC USB Sync connection. Go to here to download these. When you see the USB in the white bar of bootloader right click on the HSPL 4 utility and select run as administrator. Follow the on screen instructions and select the desired HSPL version when it prompts you for what version you want to install. If you want to flash MAGLDR to install NAND Android or Windows Phone 7 you have to select 2.08 HSPL. When you see “We hacked it” on your HD2 screen you click yes on your computer in the box on the screen to confirm you see “We hacked it” then click close and you have flashed HSPL to your HTC HD2.
What is MAGLDR , why do I need it, and what does it do?​
Ok so you want to know what MAGLDR is, well MAGLDR is a custom made bootloader that allows you to boot deferent OS’s directly from NAND. This bootloader was developed by the Dark Forces Team and is a closed source software that is still being developed but is free to use. MAGLDR is so much more than a bootloader though. It is disigned to work with both the T-Mobile HD2 and the EU HD2 there for it will unlock the hidden 128 MB of RAM for the EU HD2 when combined with a 2.07.50.xx or above radio. Also you have to have a 2.07.50.xx or higher radio or MAGLDR will not even boot up.
The MAGLDR bootloader boots up after or should I say in succession of the original bootloader on the HD2, so you still have the original bootloader on your HD2 and can still use it to reflash a Windows mobile ROM at anytime. To navigate through the options on the main menu you use the up and down volume buttons, the send button is the select button , and the end button is the back button. To boot into MAGLDR you have to keep the power button pressed down while your HD2 powers on. Also remember you can not charge your HD2 while in MAGLDR you have to boot into your ROM to charge your HD2, and then you can only charge your HD2 while it is powered on as long as MAGLDR is installed on it. The current version of MAGLDR is v1.13 and this is what is in the main menu of MAGLDR.
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011​
1. Boot WPH
2. Boot AD SD
3. Boot AD NAND
4. USB Mass Stg
5. USB Flasher
6. USB TTY
7. AD Hard reset
8. AD Recovery
9. Tetris
10. Services
11. Reset
12. Power Down​
Ok now I know you are saying what is all those options for. Well let me start at the beginning here.
Option #1
Boot WPH, this is what you select if have a Windows Phone 7(WP7) ROM installed to NAND and you are booted up into MAGLDR but want to boot into your WP7 ROM.
Option #2
Boot AD SD, this allows you to boot into Android from SD card. You also use this to boot Android from SD card if you have WP7 ROM or a Android ROM in NAND.( Go to here for a tutorial on how to do this.) This option also allows you to boot other Android specific software such as Clock Work Mod Recovery(CWM) that you have placed specific files for on your SD card. This option is not really needed for CWM as you no longer have to place files for it on your SD card you can flash it straight to NAND.
Option #3
Boot AD NAND, this option allows you to boot into your NAND Android ROM you have flashed if you have booted into MAGLDR.
Option #4
USB Mass Stg, this option gives you the ability to use your SD card as a Mass Storage/Removable drive when you are booted up into MAGLDR and your HD2 is connected via USB cable to your computer. You use this option to transfer files from your computer to your SD card or from your SD card to your computer.
Option #5
USB Flasher, this option allows you to flash a ROM be it Android or WP7 to NAND , or any other program or software that requires a USB connection to install. You can not flash Windows Mobile, a new radio, or a splash screen to your HD2 using this option of MAGLDR, you have to use the original (SPL/HSPL) bootloader to do this. Connect to your computer via USB cable after you select this option to use it.
Option #6
USB TTY, this option puts MAGLDR into TTY mode which allows you the ability to ability to dump dmesg after crash and etc, but this option will be mainly for developers when it is up and running. Presently it is not functional just yet as it still requires drivers to be found or developed. It will also give you the abilities equivalent to MTTY or Task 29 when it is up and running. ( Maybe in the next versionJ)
Option #7
AD Hard reset, this option allows you to hard reset your Android ROM and erase android partitions with "hr" in the flags. Also allows you to hard reset it you are using a WP7 ROM. (Anyone that used Windows Mobile long enough knows what a hard reset is )
Option #8
AD Recovery, this option allows you to do a systems recovery just like native Android devices and allows you to boot into CWM which is even more like a native Android device.
Option #9
Tetris, oh yes that is right you can play Tetris while booted into MAGLDR. Hey everybody has to have some fun somehow, and everybody likes Tetris right. Get 111111 score to unlock hidden MAGLDR feature, and no I have not done it and I do not know what the hidden feature is. Got to love a dev that thinks of everything lol.
Option #10
Services, this option has 5 sub options with 2 of those having 3 sub options of their own. I will get into them shortly.
Option #11
Reset, this option works just lick the reset button under the battery cover of the HD2. It allows you to reboot your HD2 while you are booted into MAGLDR. If you want to boot back into MAGLDR you have to hold the power button down when your HD2 is powering back on. If you want to just boot up you installed ROM you do nothing but let your HD2 boot up.
Option #12
Power Down, this option is self explanatory. You choose this option to turn your HD2 off while booted into MAGLDR.
Ok so that has the main menu covered, now let me go over the sub option in Option #10 of the main menu. Here is what is in the sub menu of Services.
Services​
1. Boot Settings
2. DMESG to SD
3. Dump UD to SD
4. Use Last 24 NAND
5. Clear SD MBR​
Ok I will go in order here so lets look at option #1 Boot Settings.
Option #1 of Services Boot settings​
1. Boot Source
2. Always Menu
3. AD SD Dir​
Option #1
Boot Source allows you to choose what source you want MAGLDR to boot your ROM from as default when you power on your HD2. You can choose Android from SD, Android from NAND, or WPH from NAND. This option is set automatically when you flash a ROM to NAND depending on if it is Android or WP7. This is the option that tells MAGLDR what it is to boot at boot up if you do not hold the power button down while powering up your phone to access MAGLDR.
Option #2
Always Menu, this option allows you to let MAGLDR to boot up and then automatically boot your ROM you have installed or to let MAGLDR boot up every time and you manually boot the ROM with either option #1, #2, or #3 from the main menu. Just press the send button if you want MAGLDR to boot up every time or press the end button if you do not want MAGLDR to boot up to the main menu everytime you boot up your HD2.
Option #3
AD SD Dir, this option gives you access to view the directories and most files on your SD card if you have Android installed to NAND on your HD2. It also lets you choose the SD card Android build you want MAGLDR to boot if you are dual booting WP& and Android from SD card.
Option #2 of Services DMESG to SD​
DMESG is a shell command for the ash shell that ADB provides to run commands on a emulator or device. The DMESG command tells MAGLDR to store debugging messages to the SD card. This is useful for developers. This is also still in development so use at your own risk.
Option #3 of Services Dump UD to SD​
Ok I have done a very good bit of research on this option. I am still not 100% sure what this option is for but this is what I found about it. In the thread for MAGLDR it say.,
DumpUDtoSD" - dumps asize partition to SD card. BUGGY, SLOW and not tested. Don't use it.
Click to expand...
Click to collapse
Now this does not say much to non-technically knowledgeable people. What I think this is for is to create a partition on the SD card for apps to SD for Android, or to create a partition on the SD card to be able to run Android from SD card. If I am wrong please someone let me know and I will change this.
Option #4 of Services Use Last 24 NAND​
This option allows you to use the last 24 MB of NAND memory. Right now if you select this option you will lose it after a soft reset, this option is still experimental also.
Option #5 of Services Clear SD MBR​
This option allows you to clear the MBR from your SD card. What is MBR you ask, MBR stands for Master Boot Record. MBR searches the partition table for the active partition, it then copies the active boot sector of that partition into memory and transfers control over to that program. The MBR runs whenever you boot your HD2.
Here are my sources for this information. [DFT]MAGLDR 1.13 released! [AD RECOV support added][FONT=&quot], [/FONT]Leo/Magldr-HTC-Linux-Mozilla, Android developers, Dark Forces Team-Places for Android newbies, tech-faq.com , and last but not least Google.
How to flash MAGLDR to a HTC HD2​
To flash MAGLDR to your HD2 , and this is very important, you must first have HSPL 2.08 flashed to your HD2 and you have to have a radio version 2.07.50.xx to 2.15.50.14. If you do not have HSPL 2.08 the flash will fail, and if you do not have radio version 2.15.50.14 or 2.14.50.02 MAGLDR will not show up on your HD2 even if it was sussefully flashed.. Download MAGLDR v1.13, when you extract the zip file it will create a folder named “MAGLDR113_DAF” so choose where you want to extract t the files to and let it extract the files. Next navigate to where you extracted the MAGLDR113_DAF to and open the file. Put your HD2 into bootloader by pressing and holding down the volume down button while powering on your HD2. Connect your HD2 to your computer via USB cable and wait until Serial in the white bar of the bootloader screen to change to USB then right click “RomUpdateUtility” that is in the MAGLDR113_DAF file and select run as administrator. Follow the instructions of the ROM update utility and when the progress bar on the computer screen and your HD2 reach 100% your computer will show in the ROM update utility it is finished click close on the ROM update utility box on your computer screen and you have MAGLDR on your HD2, your HD2 should automaticly reboot into MAGLDR. Also do not unplug your USB cable until your HD2 has rebooted itself.
Flash MAGLDR via SD Card​
You can also flash MAGLDR via SD card just like you can a Windows Mobile ROM. Just open the MAGLDR113_DAF file and copy the magldr.nbh file to the root of your SD card. Once it is copied change the name of the file on your SD card to LEOIMG.nbh. Power off your HD2 and then reboot your HD2 keep the volume down button held down until you see searching on your HD2 screen then release. Follow the on-screen instructions and let it flash.
Note when you flash MAGLDR to your HD2 it wipes your current ROM from the HD2. So you will have a ROM less HD2 until you either flash a Android ROM or WP7 to your HD2. You can also reflash a Windows Mobile stock or custom ROM but this will remove MAGLDR from your HD2.
What is cLK and what does it do?​
Well like MAGLDR, cedesmitjh's Little Kernel (cLK) is a custom bootloader for the HTC HD2. But unlike MAGLDR though, cLK just boots NAND Android ROMs for the HD2 not any other OS's or SD card builds. Also cLK is a open sourced project so anyone can help contribute to the on going development of it, unlike MAGLDR which is closed sourced. XDA senior member cedesmith originally created cLK but several great devs, such as arif-ali, have help get cLK to the stable and very usable bootloader it is now. If you would like to see who some of the other devs that or helping develop cLK go the cLK thread and read the short cridets list at the bottom of post #1. You will have to read through the thread though to see just how many devs and exactly what devs have been involved with cLK.
With cLK the HD2 has the ability to be pretty much just like a native Android device. You do not see it boot up while powering on the HD2. You can use Andriod SDK fastboot commands on the HD2 with cLK just like a native Android device. You can also use ROM Manager (can be found in the Android Market) with cLK too. With ROM manager it works hand and hand with CWM so you truly no longer need a computer to download and change ROMs, change Kernels, make and manage Nandroid backups, check for ROM updates, and even flash upated versions of CWM all from within your Android ROM. It also lets you boot straight into recovery. Last but not least cLK supports charging while the HD2 is powered off (MAGLDR ) so you don't have to worry about your battery dieing and you having to buy a external charger, borrow a friends HD2, or take more drastic measures (mutilate a USB cable) to charge your battery enough to boot your HD2.
With cLK it runs in sussesion of the original SPL bootloader so you can easily revert back to Windows Mobile 6.5, flash a new radio, flash a new splash screen, or even flash MAGLDR.
I have found no evidence that cLK can help unlock the extra 128MB of RAM on the EU HD2's. So all you EU HD2 users you will only have 448MB of RAM when using cLK. Also it is not a restiction on the HSPL or radio version you can use with cLK, but I still suggest HSPL 2.08, HSPL3.03, and radio 2.07.50.xx or higher just to be safe.
To access cLK after you have installed a Android ROM, while powering on your HD2 you have to hold down any key except the power key to get the console to come up. You hold down the home key to boot to recovery while powering on. And you hold down the back key to put your HD2 into fastboot mode so you can enter fastboot commands from your computer.
Source of information [15MAR][BOOTLOADER]+[RECOVERY] cLK v1.3.3 Google
How to install cLK ​
Just like all other custom software for the HD2 you need HSPL flashed to your HD2, I suggest HSPL 2.08 or HSPL 3.03. I also suggest you have a radio version 2.07.50.xx or higher, this is not required as far as I know but it could not hurt. Now to install cLk you need to go to the cLK thread and download "cLK_1.3.3_system_150M_cedesmith.zip" from the bottom of post #3 of the thread, or if you want the most up to date version go to post #1395 and download "cLK_1.4.0.1_layouts_arif.zip" Next you will need go to post #844 of the thread and download the "CustomRUU.zip" file. Next creat a folder named cLk or whatever you want to name it and extract the files from both the zip files the folder you created. I have a attached zip file at the bottom of this post if this is too complicated for you, but I hope is not as this is the easy part of cLK. Next put your HD2 into bootloader by holding the volume button down while powering on your HD2. Connect your HD2 to your computer via USB cable and wait for the Serial in the white bar of bootloader to change to USB. Then open the file you created and right click on the Custom RUU and select run as administrator. Follow the on screen instructions and when your HD2 reboots click finished on your computer and you have flashed cLK. Go to post #3 "How to install CWM using cLK" of this thread to learn how to flash CWM to your HD2 now.
Video thanks to XDA Senior Member 96edwy​
Edit. I attached several cLK v1.4.0.1 files with rar files with the custom RUU included with them at the bottom of post #2. I have a 100MB partion, a 150MB partion, a 200MB partion, a 260MB patition, a 300MB partion, a 360MB partition, and a 400MB partition. But you can download the 1.4.0.1 cLK and combine any of the included .nbh files with the custom RUU to flash cLK v1.4.0.1 just chose the partition size you need. It has .nbh files with 80Mb partitions all the way up to 400MB partitions. I just made rar files with the most common ones to make it easier on people. I also left the cLK 1.3.3 with custom RUU.zip for anyone that wants to use it, it is a 150MB partition.
Flashing cLK via SD card​This works best on 8GB SD cards or lower formated with Fat 32. Go to the cLK thread and download the "cLK_1.3.3_system_150_cedesmith.zip" file from the bottom of post #3 of the thread. Extract the files from the zip file to a location you can find. Then copy the RUU_signed.nbh file to the root of your SD card and then rename it to LEOIMG.nbh. Then insert your SD card into your HD2, if you used a SD card reader to transfer the file to your SD card. Power on your HD2 while holding the volume down button down until you see searching on your HD2's screen and release the volume button. Follow the on screen instructions to finish flashing cLK. Go to the post #3 "How to install CWM using cLK" of this thread to learn how to flash CWM to your HD2 now.

The rest of the guide.
What is Clockwork Mod Recovery, and how do I use it?​
Clock Work Mod Recovery is a little program that allows us HD2 owners to flash Android ROMs via SD card (the Android way) and not just by using the USB Flasher option #5 in MAGLDR. CWM is a custom recovery for native Android devices . (Would the HD2 have it any other way?)For those of you that have had a native Android device may have experienced using CWM before and will be familiar with it. CWM allows those out there that want to run Android ROMs on their HD2 the ability to apply updates via SD card, format petitions of the NAND memory, install Android ROMs via SD card, install kernels in .zip format via SD card (any .zip as long as it is recovery flashable zip format) create Nandroid backups, restore their HD2 with Nandroid backup, allows you to go into recovery mode just like a native Android device, and allows you to do a factory reset of your HD2. The reset is just for the Android ROM it will not reinstall Windows Mobile to your HD2. To navigate CWM use the up and down volume buttons to scroll up and down, use the send button to select an option, and the back arrow button to go back out of a sub menu and back to the main menu.
This is the main menu of CWM v3.0.0.5
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
-install zip from sdcard
-backup and restore
-mounts and storage
-advanced
-power off
​
Ok so what is all of that you say?
Reboot system
This option will let you reboot your HD2 from CWM. Highlight this option and press the send button and your HD2 will reboot.
Apply update from SD card
This option allows you the ability to install updates via your SD card, install kernels, install ROMs, themes, appa etc. You simply copy the update.zip file to the root of your SD card (it has to be named update.zip) using option #4 USB Flasher in MAGLDR or the mount and storage option in CWM. Then scroll down to highlight this option in the main menu of CWM and press the send button. This bringsnup a confirmation screen, scoll down and highlight Yes -- Install/sdcard/update.zip press the send button and it will install the update.
Wipe data/factory reset
This option allows you to wipe all user data from your HD2 effectively resetting your HD2 to the way it was when you istalled the Android ROM on it. It also wipes any sd.ext partition. Select this option and then scroll down to Yes -- delete all user data and press the send button this will reset your HD2. Make sure you make a Nandroid back up using the backup and restore option of CWM before doing this as this is not reversible.
Wipe cache partition
This option allows you to clean the cache partition of your HD2. It is a good idea to use this befor you install a ROM, kernel, or any custom mod to your HD2. Scroll down to highlight this option press the send button, then scroll down to highlight Yes – Wipe Cache press send button and it will wipe your cache.
Install zip from SD.
This option has four sub menu options in it, I will cover them shortly. They are the following.
-apply/sdcard/update.zip
-choose zip from sdcard
-toggle signature verification
-toggle script asserts
Backup and restore
This option has three sub menu options in it, again I will cover them shortly. They are as follows.
-Backup
-Restore
-Advanced Restore
Mounts and storage
This option has 12 sub menu options in it, all of these options are pretty much self explanatory. All the mount options simply allow you to mount or unmount the respective partition. All the format options do just that allows you to format the respective portitions. Warning if you use any of these options it will be a total wipe of that partition therefore if you choose format system it will leave you with no ROM and format boot in a native Android device would leave you with no bootloader and will brick a native Android device if a bootloader is not reinstalled before reboot. We HD2 users have to use MGLDR or cLK to boot Android, but we also still have our original bootloader too. The last option allows you to transfer data to or from your SD card via USB connection, if it is the first time you use it you will have to let the drivers load and it should show up in Devices and Printers on your computer as Android Phone. You can also view the contents of your SD card this way. Here is how the options look. To select any of these options just scroll to it to highlight the option and press the send button, for the format options you will have to select Yes – Format but remember these are not reversible once done, and last for the mount USB option you will have to connect your HD2 via USB cable and remember to press send to unmounts your card before unplugging your USB cable
-mount/data
-mount/cache
-mount/sdcard
-mount/sd-ext
-format boot
-format system
-format cache
-format sdcard
-format sd-ext
-mount USB storage
Advanced
This option has eight sub menu option in it, again I will cover these shortly. They are as follows
-Reboot Recovery
-wipe Dalvik Cache
-Report Error
-Key Test
-Partition SD Card
-Fix Permissions
Ok that gives you a good overview of the main menu in CWM. Now let us look at all the sub menus minus the mounts and storage sub menu of course.
Install zip from SD card​
-apply/sdcard/update.zip
This does the same as the apply update from sdcard option in main menu of CWM and you follow the same directions as it after you highlight and press the send button to select it.
-choose zip from sdcard
This option allows you to flash your Android ROM via SD card, kernels, apps, you name it as long as it is in the recovery flashable zip formate. You simple copy the .zip file to the root of your SD card using option #4 USB Mass Stg of MAGLDR or mounts and storage option in CWM. Boot into MAGLDR then boot CWM via option #2 Boot AD SD or option #8 AD Recovery of MAGLDR depending on the way you installed CWM. Then scroll down to highlight install zip from sdcard in the main menu press the send button to select it, then scroll down to choose zip from sdcard to high light it and press the send button to select it, then scroll through the contents of yout SD card until you highlight the zip file for your ROM and press the send button and it will flash the ROM to your HD2.
Toggle signature verification
This option does just that, it allows you to toggle signature verification on or off depending on what it says in the highlighted area when you press the send button to select it. This is for allowing custom ROMs and other custom or nonofficial software on native android devices but really has no use in the HD2 as it is not a native Android device and has no official ROM so every ROM is a custom ROM and any Android related software installed to it is unofficial.. To use this just press the send button to toggle it on and again to toggle it off while you are on the screen for this option as it will be the only highlighted option. Just to be safe I would not turn the verification on, who knows what it might do lol.
Toggle script asserts
This option does just that, it toggles script asserts on and off depending on what it says in the highlighted area when you press the send button to select it. Script asserts is a way for the ROM package to check values if you will while it is being flashed if the values of the compared components do not match then the installation will halt and give an error message. So this is something mostly for devs to use I suggest if you are not a dev just leave this alone. To use this just press the send button to toggle it on and again to toggle it off while you are on the screen for this option as it will be the only highlighted option.
Backup and restore​
Backup
This option allows you to make a Nandroid Backup of your HD2. It creates a backup for boot, system, data, cache, and sd-ext partitions. You can use this Nandroid backup to restore your settings and user information and the such, pretty much everything you will need to make the phone just like you had it before you had to reset it or flashed a new ROM. To make a backup boot into MAGLDR and choose option #2 Boot AD SD or option #8 AD Recovery in MAGLDR, which ever one you have to use depending on the way you installed CWM, and boot into CWM. Next scroll down to backup and restore to highlight it and press the send button to select it, press the send button again as backup will be the default option highlighted and let your phone complete making a backup file. The backup file is stored on your SD card.
Restore
This option allows you to restore all of your personal information and settings using a Nandroid backup file you made by using the backup option above. This restore does a complete restore of all boot, system, data, cache and sd-ext partitions. This translate into you having the same phone you had before you reset the phone or flashed a new ROM. To do a restore boot into MAGLDR and choose option #2 Boot AD SD or option #8 AD Recovery in MAGLDR, which ever one you have to use depending on the way you installed CWM, and boot into CWM. Next scroll down to backup and restore to highlight it and press the send button to select it, then scroll down to restore to highlight it and press the send button to select it. Then highlight the backup you want to use if you have more than one backup file on your SD card and press the send button to select it and the phone will then restore your settings and information to the phone. (Note if you are restoring to a new/different ROM do not use this option, go to advance restore and only restore the data and cache, as if you restore the boot and system you will just have the same ROM again as boot restores your Lenuix kernel and system restors your ROM.)
Advanced Restore
This option allows you to restore just like regular restore but it could be call selective recovery as it lets you choose which part of the backup you want to use to backup your settings and information from. Example if you want to just use the cache partition and the data partition files from the backup Advanced Restore will allow you to do this. To use Advanced Restore boot into MAGLDR and choose option #2 Boot AD SD or option #8 AD Recovery in MAGLDR, which ever one you have to use depending on the way you installed CWM, and boot into CWM. Next scroll down to backup and restore to highlight it and press the send button to select it, then scroll down to Advanced Restore to highlight it and press the send button to select it. Then scroll to highlight the partition you want to use to backup with and press the send button to select it. The phone will restore only the files that were in that partition. If you want to use more than just one partition you will have to navigate back to Advanced Restore from the main menu of CWM as when the restore is complete it will go back to the main menu of CWM.
Data restores your personal information.
Cache restores your settings and any other cached information.
System restores your ROM. ( So do not restore this if you changing ROMs)
Boot restores your Lenuix kernel . (So do not restore this if you are changing ROMs)
Advanced​
Reboot Recovery
This option simple just reboots your phone from CWM. In native Android devices this would take reboot you straight back into Recovery but being as the HD2 has to boot into bootloader then MAGLDR it can not do this. (We HD2 owners are still crossing our fingers though) Press the send button to select it as it is the default highlighted option when you go to Advanced.
Wipe Dalvik Cache
This option allows you to clear the Delvik cache on your phone. Dalvick cache is a cache area for a program named Delvik. This program is a java based virtual machine. This program is the bases for running programs with the .apk extension. The cache is a result of the optimization of running programs. It is recommended to wipe this cache any time you are going to flash a new ROM as you might encounter issues if you don’t. It is not advised to wipe this cache any other time as it might might make your system sluggish or buggy until it rebuilds the cache.
Wipe Battery Stats
This option allows you to clear your battery stats in/data, it is believed that if you fully charge your battery to 100% then wipe your battery stats and drain your battery completely down, then completely charge it to 100% again it recalibrates your battery and helps battery life. To do this just scroll down while in advanced sub menu to Wipe Battery Stats to highlight it and press the send button to select it.
Report Error
This Option allows you to create and save a log of CWM’s operations to your SD card that can be used with Android ROM manager. Highlight this option and press the send button to create the log.
Key Test
This option allows you to test the external hardware buttons (keys). Highlight this option and press the send button to select it. Once selected you can press all the hardware keys and get the corresponding value for it. After all the keys have been press you will return to the main menu of CWM. YOU should get these values.
Up volume button=Key:115
Down volume button=Key:114
Send button=231
Home button=Key:102
Windows Start button=Key:139
Back button=Key:158
End button=Key:107
Partition SD
This option allows you to be able to petition your SD card so you can take advantage of ROMs that support data2ext which allows you to use some of your SD card as the /data partition. This is internal data that contains user information. Warning using this option will wipe all data and contents of your SD card, so make a backup copy of it before you use this option. To use this option highlight it and press the send button and a list of Partition sizes will come up just choose the appropriate partition size for you. Here is a list of the partition sizes.
Ext Size​ -128M​ -256M​ -512M​ -1024​ -2048​ -4096​
Fix Permissions
This option allows you to fix the file permissions for internal memory partitions. This is useful if your HD2 starts to give errors and force closes, as these are sometimes caused by apps that have root access. Just highlight this option and that’s right you guessed it press the send button to select it lol.
This concludes the run down off Clock Work Mod Recovery for the HTC HD2. Here is my sources for this information. [01 FEB][RECOVERY] ClockworkMod Recovery for HD2 - v1.3[FONT=&quot], [/FONT]update-script syntax - A guide for ROM devs, modders, and themers[FONT=&quot], [/FONT]Android forums[FONT=&quot], [/FONT]wipe battery and rotate stats[FONT=&quot],[/FONT] What Is ClockworkMod Recovery And How To Use It On Android [Complete Guide], and last but not least Google.

How to install Clock Work Mod Recovery to your HTC HD2 using MAGLDR
​
To install CWM to your HD2 you must first have HSPL 2.08 installed and MAGLDR installed on your HD2. See the above to install both. There is two ways to install CWM to your HD2. I will give instructions on both.
New WAY​
Download the appropriate partition size recovery.zip file , check the first post by the ROM dev in the ROM thread for their suggested partition size. Go the CWM thread to download and see more instructions on how to install. Once you have the .zip file downloaded extract the contents of the zip file to the location and folder of your choosing. Next power on your HD2 but keep the power button pressed down to enter MAGLDR. Scroll down to option #5 USB flasher and connect it via USB cable to your computer. Give it a minute to install any drivers necessary and then right click on the DAF in the folder you extracted the files to and click on run as administrator. Let the progress bar on your computer and HD2 complete to 100% then click close on the last window of the installer. Your HD2 will automatically reboot it’s self but hold down the power button as it boots back up to bring up MAGLDR again. Scroll down to AD Recovery and press the send button and CWM will boot.
Old Way​
Download the appropriate partition size .zip file for SD boot, check the first post by the ROM dev in the ROM thread for their suggested partition size. Go the CWM thread to download and see more instructions on how to install. Once you have the .zip file downloaded extract the contents of the zip file to the location and folder of your choosing. Next power on your HD2 but keep the power button pressed down to enter MAGLDR. Scroll down to option #4 USB Mass Stg and connect it via USB cable to your computer. Give it a minute to install any drivers necessary and then open the file you extracted the files to. Open the file copy_to_sd_root and then copy both initrd.gz and zImage to the root of your SD card. Scroll to opyion #2 Boot AD SD and press the select button to select it. This will boot CWM
How to install CWM using cLK
To install CWM after you have flashed cLK to your HD2 you have to download and installJava JDK (needed for the Android SDK) and Andriod SDK. After Android SDK installs a couple of windows will pop up. Look for the one that says "Choose Packages to Instal", you only have to accept "Android SDK-Tools"and "Google USB Drivers", but you can accept more if you want. When the packages are done installing open "Environment Variables". To do this go to Start\right click on computer\ Properties\Advanced System Settings\ Environment Variables. In the lower section of the Environment Variables window scroll to "Path" and then click edit. In the "Variable Value" text box go all the way to the end of the text and type in, C:\Program Files\Android\android-sdk\platform-tools;.You have to include the semicolon at the end of it. Click ok on the "Edit System variables", "Environment Variables", and" Advanced System Settings" windows so you changes will be saved. Next go to post #355 of the cLK thread and download the "cLK_recovery_1.3.3_3.0.1.9.zip" file. Extract the files from this file to the tools folder in Crograqm Files\Android\android-sdk\tools. Now navigate to the that location and hold down the Shift button and right click anywhere in the window and select "Open Command Window Here" and a command window should open with that directory in it already. Now connect your HD2 via USB cable to your computer. If the USB drivers do not auto install, then go to Start\Control Panel\Device Manager and right click on "Android" and select update drivers. Then choose "Browse my computer for driver software". Navigate to the Crogram Files\Android\android-sdk\extra\google\usb_drivers then click ok then click install. When the drivers are installed you should see "fasttboot processing commands" on your HD2 screen, if you don't the drivers are not installed. Next you need to type in these commands in the command window.
​
​
fastboot erase recovery And press enter
You should get a comfirmation a time elasped. Next type the following.
fastboot flash recovery clk_recovery_1.3.3_3.0.1.9.img And press enter
You should get another comfirmation and time elasped. Next type the following .
fastboot reboot This will reboot your HD2, hold down the home key to go to CWM
Now you can flash a Android ROM using CWM. Hint do not do a restore with a Nandroid backup that was made using a MAGLDR ROM as oit will cause issues. Also if you want to flash a updated CWM version download ROM Manager from the Android Market and use it to flash the updated CWM.
Thanks to XDA senior member Newman180 for his guide.
If you are getting a error saying your computer can not find or does not have a AdbWinApi.dll file then go to post #45 of this thread by XDA member Falkenbat.
Updated version of clk with CWM built in
If you are having trouble installing Clockwork Mod Recovery via fastboot commands, or if you just want the most recent version of clk. Then go and check out the most recent version posted in the thread XDA Recognized Developer Rick_1995. i this version of clk CWM is built into clk and is flashed to your HD2 when you flash clk. Plus it has a added Hboot screen so the HD2 has a clk interface that is just like the bootloader inteface that a HTC device that runs Android natively has. He also gives a pretty good break down on the differences of MAGLDR and clk.​
Radio info​
It was mentioned that I a should add some information on radios so here it is. I did a good bit of searching and could only find basic info on the radios. Basically as it says in the, "The HTC HD2 Master Radio Thread" the radio is software that controls the radio interfaces for your HD2 and other devices. These interfaces include WiFi, Bluetooth, GPS,GPRS, GSM, UMTS and even the new LTE and WiMax being rolled out. So you see how the radio can help or hinder your reception depending on how old are new your radio version is and where you live in the world. The radio also has some control over the camera function as well, exactly how it does I do not know so please do not ask. check my sources and you will see what I mean. I will add more to this if I can find the information. The international HD2s with 448 MB of ram can flash pretty much any radio version but don't just take my word for it do your own research as a wrong radio will brick your phone. Also the international HD2s have to have a 2.08.50.xx radio or highe for them to unlock the extra ram of 576 MB. (Thanks to XDA senior member Kholk for the master radio thread., and senior member samsamuel for the info about unlocking the extra ram!)​
Warning to all TMOUS HD2 owners you can not flash a 2.04,50.xx, 2.05.50.xx, or any x.xx.51.xx version radio to your HD2.This includes radio ROM verision that are included in a ROM. These radio versions will brick/ KILL a TMOUS HD2!!!!! ​
Sources for this info are "The HTC HD2 Master Radio Thread" and the XDA wiki.​
This is the end of my Guide, I hope this is helpful to people Peace to all. Don’t forget the thanks button.
Change Log:
Originally posted guide on April 4th 2011
Added Radio information April 5th 2011
Added cLK information and the installation guide for cLK and CWM using fastboot commands. Attached cLK 1.3.3 custom RUU.zip file. May 3rd 2011
Attached cLK 1.4.0.1 100MB to 400MB partition.rar. Also edited guide so close to all the available post space is at the bottom of post #3. July 5th 2011
Added Link in post #1 to HD2 NAND Toolkit by XDA Recognized Developer ksubedi, sorry no date for this one.
Added cLK install video by XDA Senior Member 96edwy, big thanks. Added link in post #1 to the EasyAndroid toolkit by XDA Senior Member kevin134. Added Change log. August 23rd 2011
Added info and link for the updated clk with built in CWM April 7, 2012

***reserved for future comment****
nice....

Maybe you should add radio info also.
Well more in depth I mean. xD

Wow, this is really a useful and practical guide or reference to help users..
I will put in in my signature for easy reference...
Thanks and cheers

Kailkti said:
Maybe you should add radio info also.
Well more in depth I mean. xD
Click to expand...
Click to collapse
I will do some proper research and see what I can come up with.
Any particular thing or just radios in general?
silverwind said:
Wow, this is really a useful and practical guide or reference to help users..
I will put in in my signature for easy reference...
Thanks and cheers
Click to expand...
Click to collapse
Thanks glad you liked it and that is the reason I wrote it was to try and help out HD2 users and maybe even a few Android users as to what all CWM is and what you can do with it.
backlashsid said:
***reserved for future comment****
Click to expand...
Click to collapse
Still waiting on your post Backlashsid.

great job with the detailed informations. make me understand more how my hd2 run and why we need what we need to get our hd2 to where its at now.

Kailkti said:
Maybe you should add radio info also.
Well more in depth I mean. xD
Click to expand...
Click to collapse
I added some radio information to the bottom of post #3 or at least what information I could find on radios.
And this is a shameless bump.

Ah thanks. I asked for it so the guide would be informative in all areas. But like all guides it'll prolly get ignored by most noobs, due to the "feeling that they are being overwhelmed by the information"... -_-"
For those who do read it they'll be grateful so that they don't "accidentally" brick their device.
Good job btw. ^-^ Oh btw, in the radio info you have ram instead of rom, beside the 1024 part.

Kailkti said:
Ah thanks. I asked for it so the guide would be informative in all areas. But like all guides it'll prolly get ignored by most noobs, due to the "feeling that they are being overwhelmed by the information"... -_-"
For those who do read it they'll be grateful so that they don't "accidentally" brick their device.
Good job btw. ^-^ Oh btw, in the radio info you have ram instead of rom, beside the 1024 part.
Click to expand...
Click to collapse
Thanks for the nice comments and I will fix the error you mentioned. Oh and I am working on adding info on cedesmith's (L)ittle (K)ernel bootloader v1.3.1 (clK) too.

Ah I forgot about cLK too. Always admired/appreciated that piece of work. Sadly never had the time to try it out since I dun have my HD2 with me now... T.T

you deserve some recognition for this. I'm sure this has helped a lot of people
Sent from my HTC HD2 using XDA App

bbot3k said:
you deserve some recognition for this. I'm sure this has helped a lot of people
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks, I hope it will help a lot of people out but I just posted it yesterday. So not sure how many it might have helped so far, but it has had 264 views so far

Meny Thanks!!

T-Macgnolia said:
Thanks for the nice comments and I will fix the error you mentioned. Oh and I am working on adding info on cedesmith's (L)ittle (K)ernel bootloader v1.3.1 (clK) too.
Click to expand...
Click to collapse
Great Job!
A very Usefull guide for all the HD2 Owners
Thank you!

very informative post!
do you intend to explain CyanogenMod also ?

El Che said:
very informative post!
do you intend to explain CyanogenMod also ?
Click to expand...
Click to collapse
Maybe as soon as I fully understand it myself lol. But I will see what I can do bit I will have to get my busted laptop screen fixed first.

Thanks so much for all this information, Although I have been building and hacking computers for almost 30 years, I still have a lot to learn before I attempt to do similar on my HTC HD2
Mcgam2000

mcgam2000 said:
Thanks so much for all this information, Although I have been building and hacking computers for almost 30 years, I still have a lot to learn before I attempt to do similar on my HTC HD2
Mcgam2000
Click to expand...
Click to collapse
Hi,
Great first post.
People should pay attention to your wise words.

[Q] Lost installing Icecream Rojm

Hi, after reading for a long time, finally, this morning I've decided to uninstall wm 6.5 from my htc hd2, replacing it for Icecream Sandwiche.
At this moment I'm in the middle of the way and I can't continue. When I turn on the pda, appears the Magdlr v1.13 menu. Now I should select option 8. Ad Recovery to select the zip, in the sd card, with the rom, but it fails, this message appears: "no boot sources". Can anyone tell me what I have to do, thanks very much.
The step I've followed to arrive here are:
- execute hspl4_run.exe
- execute radio 2.15.50.14
- execute magldr 1.1.3

You didn't flash cwm recovery yet

mblascog said:
Hi, after reading for a long time, finally, this morning I've decided to uninstall wm 6.5 from my htc hd2, replacing it for Icecream Sandwiche.
At this moment I'm in the middle of the way and I can't continue. When I turn on the pda, appears the Magdlr v1.13 menu. Now I should select option 8. Ad Recovery to select the zip, in the sd card, with the rom, but it fails, this message appears: "no boot sources". Can anyone tell me what I have to do, thanks very much.
The step I've followed to arrive here are:
- execute hspl4_run.exe
- execute radio 2.15.50.14
- execute magldr 1.1.3
Click to expand...
Click to collapse
You haven't listed 'flash CWM' as one of the things you've done. If you haven't flashed CWM, there is no AD Recovery to be booted into, hence the message 'no boot sources'. Just follow this guide, it makes everything simple and straightforward. You can start by flashing the correct CWM partition size. Also try out the HD2 NAND Toolkit in order to make things even easier. Once you've installed CWM with the right partition size, you just install the zip from your SD card.

I'll try just now, Thanks

Hi,
I've made a mistake in my original post. I've forgot to tell one step, the Clockwordmod. In this folder there is a daf.exe that I executed, but it seems to be not ok
Now I've downloaded the 3 files of the guide and I've executed the last one. I've turned on the pda, it seems to be ok but there is only an animated screen saver and I can't do anything more.
Thanks.

mblascog said:
Hi,
I've made a mistake in my original post. I've forgot to tell one step, the Clockwordmod. In this folder there is a daf.exe that I executed, but it seems to be not ok
Now I've downloaded the 3 files of the guide and I've executed the last one. I've turned on the pda, it seems to be ok but there is only an animated screen saver and I can't do anything more.
Thanks.
Click to expand...
Click to collapse
Yeah it takes up to 10 minutes for the first boot. The bootanimation will eventually go away, and then on subsequent reboots it will be fairly fast, around a minute or so

But I'm still with the bootanimation. Should I begin all the steps again?
Thanks

Nah just pull the battery and try again. Have you checked that you used the correct partition size for your desired ROM? If you really can't tell, link me to the ROM thread and I'll tell you which size you should be using. Be aware that your battery can't charge whilst the phone is off, so don't keep it on for too long loading the bootanimation. I'd say after a full 20 minutes has passed, the ROM definitely isn't booting and you have to either pull the battery and reboot or you've done something incorrectly along the way.

Hi,
I've used Recovery_400M_system_4M_cache_v3.0.2.4, and then I rebooted.
Thanks

mblascog said:
Hi,
I've used Recovery_400M_system_4M_cache_v3.0.2.4, and then I rebooted.
Thanks
Click to expand...
Click to collapse
In that case your partition size certainly isn't too small, but it's definitely a waste of space. On NexusHD2, a 165Mb partition is required. Every mb over that is simply being wasted, so if you flashed NexusHD2 you'd have wasted 235Mb of internal storage, which is quite a lot. Although this won't help your issue, I'd recommend flashing a smaller partition as per the OP of the ROM you wish to use. To change the size which is flashed, open the folder of the downloaded recovery and navigate to the file 'flash.cfg' (not flash.cfg.txt) and open it with notepad (which it does automatically with Windows 7). Change the value of the system partition from 400 to 165 (or whatever size is recommended) and save the file. From here just boot into USB Flasher in MAGLDR and flash the new partition.

Thanks, thanks, thanks a lot. Is the first time I can't do this and I feel happy. I see the problem was the partition too big.
I've configurated just all, also my own language. Now I'm going to navigate through Icecream.

mblascog said:
Thanks, thanks, thanks a lot. Is the first time I can't do this and I feel happy. I see the problem was the partition too big.
I've configurated just all, also my own language. Now I'm going to navigate through Icecream.
Click to expand...
Click to collapse
There's a reason there's a thanks button you know
Yeah, ICS is a great OS, and it's a vast improvement over GB, let alone Windows. WinMo was absolutely ghastly

HTC HD 2 instalation problem..

Hi,i am reading this forum since april and i still can't install android on my HTC HD2.Can somebody support me on team viwer?
I will appreciate that.
Thanks

Banica Dardu said:
Hi,i am reading this forum since april and i still can't install android on my HTC HD2.Can somebody support me on team viwer?
I will appreciate that.
Thanks
Click to expand...
Click to collapse
The guides are really simple. All you need to do is read evrything carefully. All the steps are layed down and are very clear. Would u like me to reccomend a guide?
Sent from my HD2 using XDA

http://forum.xda-developers.com/showthread.php?t=. There you go. Read carefully
Sent from my HD2 using XDA

After instaling Task 29 with Radio 2.15.50.14 windows won't run.It say green HTC and don't startup.
Thanks a lot for **** up my phone ...
What i can do ?

download radio '2.15.50', the 'nand toolkit' and 'paranoidandroid' rom from android NAND section. (You can change later, i'm just keeping it simple.)
phone into bootloader (voldown and power)
connect USB
when the word 'serial' changes to 'USB' on phone screen, ,
run hspl4.exe and choose 2.08.hspl NOT 2.08.0000, it MUST be 2.08.hspl ONLY.
when phone reboots, hold voldown to return to bootloader
serial changes to --> USB
install the radio (either run the customRUU.exe that came with teh radio,
OR
in the nand tookit, at the bottom left ''browse|install RUU'' choose browse and find the radio file you downloaded (RUU_Signed.nbh probably) then click install RUU
when phone reboots, quickly hold voldown to return to bootlaoder
when serial --> USB
in the NAND tookit click 'install magldr'
when phone reboots, don't touch it, it will start the magldr menu. if it doesn't,. you probably skipped the radio step.
In the magldr menu choose USB flasher
in the nand toolkit at the top left make sure 'magldr repart' is selected, then below that click the 150 MB
below that type 5 in the cache size box
then in the bottom left click 'repartition'.
when phone reboots let it load the magldr menu,
choose option 8 - AD recovery - this will start clockworkmod
in the clockwork mod menu choose mounts and storage - mount sd card-
copy the paranoid android rom.zip (dont unzip it) to your sd card
(you can also do this through a card reader if you have one)
still in clockwork mod, press end to step back untill you see the 'install zip from sd ', select that, then 'choose zip from sd' , , find where you copied the rom to, select it, sit back, let it install, then choose reboot system now.
done.

zzz i'm newbie,it looks a bit hard....
Can u support me via Team viwer pls? ...ofc if u have time..

It can't be more simple.. You can also use HD2 Toolkit thread (with screenshots). Link in my signature.
Sent from my HTC HD2 using XDA App

If anybody can help me via Team Viwer i wait messages/PMs....
Thanks..

If you find a list of step by steps complicated, then no offence but you probably shouldn't be flashing.
Why not try SD Android?

I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...

Banica Dardu said:
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Click to expand...
Click to collapse
If you just read everything carefully you won't have any problems. As samsamuel said you can't get simpler than that and just use SD Android if you don't know what to do.
Sent from my NexusHD2 using XDA

Banica Dardu said:
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Click to expand...
Click to collapse
listen and read this CAREFULLY. In order to install android on your internal memory ie. NAND installation, you have to follow these steps,
1. Install HSPL 2.08
2. Install Radio 2.15
3. Install MAGLDR or clK ( BOOTLOADERS )
4. Install CWM(clockworkmod recovery)
5. Install the Rom via CWM
6. Voila
You can google how to do this. Flashing means installing(if you dont know)
This is a very simple guide which takes you through all the above steps and all files are available for download. READ READ and READ somemore
http://forum.xda-developers.com/showthread.php?p=11097380

Just a bity of help with installing the ROM on the HD2
adil1508 said:
listen and read this CAREFULLY. In order to install android on your internal memory ie. NAND installation, you have to follow these steps,
1. Install HSPL 2.08
2. Install Radio 2.15
3. Install MAGLDR or clK ( BOOTLOADERS )
4. Install CWM(clockworkmod recovery)
5. Install the Rom via CWM
6. Voila
You can google how to do this. Flashing means installing(if you dont know)
This is a very simple guide which takes you through all the above steps and all files are available for download. READ READ and READ somemore
http://forum.xda-developers.com/showthread.php?p=11097380
Click to expand...
Click to collapse
Sometimes you may run into strange problems when you install the ROM.
Therefore, my recommendation is after installing CWM do:
- Partition your HD2 (using HD2 Tool) 170 Mb (Custom) and 5 Mb Cache
- Copy your ROM to the SD Card (Using USB Mount in CWM)
- Flash your ROM using Choose ZIP from SD Card
- Waitn till it has finished
- FLASH YOUR ROM A SECOND TIME (This may solve written data to Bad Blocks)
- Do not reboot but go to Advanged in CWM and do Error Report
- Copy Recovery.log to your PC Using USB Mount and check this with your favourite Wordprocessor (eg. MS-Word) and look for errors
- if there are errors, try flash again of go back and create a bigger partition (5 Mb Increments will work)
- if OK, then reboot type your SIM/PIN ans leave the phone alone for 5 nimutes at least (all sorts of homekeeping going on)
- Log on using your Google account and after you finish, let the phone finish all synchronisations (may take 10 minutes)
- Then fix your Google Play and start installing apps.
Worked for me

utrecht56 said:
S........... my recommendation is after installing CWM do:
- Partition your HD2 (using HD2 Tool) 170 Mb (Custom) and 5 Mb Cache.
Click to expand...
Click to collapse
During the partitioning process is when CWM is installed, , partitioning wipes / resets the recovery partition, and loads cwm into it, so partitioning 'after' installing cwm is nonsensical.

I assume what you're essentially pointing out is that you have to select a partition size when installing CWM anyway so you may as well do it right the first time, right? Just wanted to clarify to anyone who was unsure of what this meant.
Sent from my NexusHD2 using XDA

yea. for most users, 'partitioning' and 'installing cwm' are the same step. Certainly for magldr, , , perhaps cLK is a little different, but i suspect anyone that knows how to apply cwm without repartitioning, how-to lists don't apply to. Anyone that needs a list, however, could do without teh confusaion of figuring out how to apply cwm and THEN partition.

[GUIDE] Install MaGLDR 1.13, ClockworkMod Recovery and MIUI ROM for HD2

Hi, I've been having some trubles to find the way to first, update MaGLDR to 1.13, then install ClockworkMod Recovery and finally MIUI ROM. First I googled how to update MaGLDR to 1.13, but I couldn't follow the directions I found on the original thread, I didn't had ActiveSync. So I'm writing this thead so if someone has the same problems as I had, I hope this can help someone. And if you want to install any other ROM, this may be usefull too. I find the ROM installation from Recovery easier and faster then installing it by RUU, but, that's my opinion.
I want to make clear that all the files on this post are not my work, I just uploaded again, so you can find anything you need on this same post. I'll upload the MIUI ROM for HD2 too, I just want to add, that I rather this ROM for HD2 beacause it is very light and fast, but that's just my opinion too.
Before we begin, make sure your HD2 battery is at least 50% charge. So, let's begin.
Updating MaGLDR to 1.13 version
Downloads
MaGLDR v1.13
http://forum.xda-developers.com/attachment.php?attachmentid=1553616&stc=1&d=1355196631
As I mentioned it, my problem was to stablish an ActiveSync connection with the PC, so to solve that I've conected my HD2 on boot mode.
1. Connect your HD2 on boot mode(holding volume down key + Power button).
2. Wait for Windows to install drivers
3. Decompress the content of the file above on an empty folder
4. Rigth click on the ROMUpdateUtility.exe file and select Run as Administrator
5. Click the check box and click next, and repeat
6. Your phone will show a screen saying HTC with a progress bar for a little while, once it finishes it will restart, hold the power button so it shows the MaGLDR menu options, the option AD Recovery should be on the menu, and there you got, you just updated MaGLDR to 1.13 version.
Installing ClockworkMod Recovery
Before you choose which file to download here is an explanation from the original thread.
Q. I dont know which partition size to download
A. Depending on what type of roms you plan on using, you should choose the partition size based on the following.
150MB Partition - For bare roms including CyanogenMod, AOSP, and MiUI
250MB Partition - For Standard sense roms including Desire and EVo based ROMs, can also be used for some squashed HD builds
400MB Partition - For Larger roms including unsquashed Desire HD and Z roms, ROMs REQUIRE data2sd for EU HD2 with 512MB NAND
Downloads
Recovery v1.3 150MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553658&stc=1&d=1355196154
Recovery v1.3 250MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553671&stc=1&d=1355196518
Recovery v1.3 400MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553673&stc=1&d=1355196627
1. Turn on your phone and hold Power button until MaGLDR menu shows up
2. Select USB Flasher option and press Send(Green button)
3. Wait for windows to install drivers
4. Decompress the content of the file you choose to download on an empty folder and right click on the DAF.exe file and click Run as Administrator
5. Wait until the program detects the phone and follow the instructions until the program has finished
6. Detach the phone and turn it on and hold Power button so you can access to the MaGLDR menu
7. Select the AD Recovery option and you'll see the Recovery menu
Installing MIUI ROM
Personaly I like to create a SD partition, so here are the steps once you are into the Recovery
1. Select advanced click Send
2. Select Partition SD Card
3. Select the size of the Ext partition
4. Select the size of the swap file
5. Select Yes
Downloads
MIUI ROM Android HD2 2.4.20
http://www.mediafire.com/download.php?w6ul6y9cne5yhvc
1. Download the zip file to your SD ROM, do not decompress and insert your SD card in your phone
2. Turn on your phone into MaGLDR menu, select AD Recovery option and press Send
3. Select install zip from sdcard
4. Select choose zip from sdcard
5. Select the miuiandroid_HD2-2.4.20.zip
6. Select Yes and wait for the installation to end
7. Select reboot system now and wait for your phone to start, the forst time it takes a few minutes and there you got.
This may be a little repetitive, may be you can find some more information on other posts, but this is my first one and I just want to help because I tryed two days to figure out how to flash my HD2 and maybe this post will help someone to don't take that much time on searching. So thanks anyway

sharedito said:
Hi, I've been having some trubles to find the way to first, update MaGLDR to 1.13, then install ClockworkMod Recovery and finally MIUI ROM. First I googled how to update MaGLDR to 1.13, but I couldn't follow the directions I found on the original thread, I didn't had ActiveSync. So I'm writing this thead so if someone has the same problems as I had, I hope this can help someone. And if you want to install any other ROM, this may be usefull too. I find the ROM installation from Recovery easier and faster then installing it by RUU, but, that's my opinion.
I want to make clear that all the files on this post are not my work, I just uploaded again, so you can find anything you need on this same post. I'll upload the MIUI ROM for HD2 too, I just want to add, that I rather this ROM for HD2 beacause it is very light and fast, but that's just my opinion too.
Before we begin, make sure your HD2 battery is at least 50% charge. So, let's begin.
Updating MaGLDR to 1.13 version
Downloads
MaGLDR v1.13
http://forum.xda-developers.com/attachment.php?attachmentid=1553616&stc=1&d=1355196631
As I mentioned it, my problem was to stablish an ActiveSync connection with the PC, so to solve that I've conected my HD2 on boot mode.
1. Connect your HD2 on boot mode(holding volume down key + Power button).
2. Wait for Windows to install drivers
3. Decompress the content of the file above on an empty folder
4. Rigth click on the ROMUpdateUtility.exe file and select Run as Administrator
5. Click the check box and click next, and repeat
6. Your phone will show a screen saying HTC with a progress bar for a little while, once it finishes it will restart, hold the power button so it shows the MaGLDR menu options, the option AD Recovery should be on the menu, and there you got, you just updated MaGLDR to 1.13 version.
Installing ClockworkMod Recovery
Before you choose which file to download here is an explanation from the original thread.
Q. I dont know which partition size to download
A. Depending on what type of roms you plan on using, you should choose the partition size based on the following.
150MB Partition - For bare roms including CyanogenMod, AOSP, and MiUI
250MB Partition - For Standard sense roms including Desire and EVo based ROMs, can also be used for some squashed HD builds
400MB Partition - For Larger roms including unsquashed Desire HD and Z roms, ROMs REQUIRE data2sd for EU HD2 with 512MB NAND
Downloads
Recovery v1.3 150MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553658&stc=1&d=1355196154
Recovery v1.3 250MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553671&stc=1&d=1355196518
Recovery v1.3 400MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553673&stc=1&d=1355196627
1. Turn on your phone and hold Power button until MaGLDR menu shows up
2. Select USB Flasher option and press Send(Green button)
3. Wait for windows to install drivers
4. Decompress the content of the file you choose to download on an empty folder and right click on the DAF.exe file and click Run as Administrator
5. Wait until the program detects the phone and follow the instructions until the program has finished
6. Detach the phone and turn it on and hold Power button so you can access to the MaGLDR menu
7. Select the AD Recovery option and you'll see the Recovery menu
Installing MIUI ROM
Personaly I like to create a SD partition, so here are the steps once you are into the Recovery
1. Select advanced click Send
2. Select Partition SD Card
3. Select the size of the Ext partition
4. Select the size of the swap file
5. Select Yes
Downloads
MIUI ROM Android HD2 2.4.20
http://www.mediafire.com/download.php?w6ul6y9cne5yhvc
1. Download the zip file to your SD ROM, do not decompress and insert your SD card in your phone
2. Turn on your phone into MaGLDR menu, select AD Recovery option and press Send
3. Select install zip from sdcard
4. Select choose zip from sdcard
5. Select the miuiandroid_HD2-2.4.20.zip
6. Select Yes and wait for the installation to end
7. Select reboot system now and wait for your phone to start, the forst time it takes a few minutes and there you got.
This may be a little repetitive, may be you can find some more information on other posts, but this is my first one and I just want to help because I tryed two days to figure out how to flash my HD2 and maybe this post will help someone to don't take that much time on searching. So thanks anyway
Click to expand...
Click to collapse
I got error in connection (through ActSync,) what is the solution. i have installed HTCSync but it doesnt detect my device.
Device Info :
Model No : T-Mobile_LEO
Platform : PocketPC
Radio : 2.10.50.26
OS : 5.2.21892
Protocol : 15.39.50.07U
What to do ?????

Easy WAY
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....

No problem
Django64 said:
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....
Click to expand...
Click to collapse
No problem, I made this post log time ago, but I'm glad to know at least it helped. And lol, I have parts of HD2 too, I am now on a i777, so let's see how it goes

Santbohara said:
I got error in connection (through ActSync,) what is the solution. i have installed HTCSync but it doesnt detect my device.
Device Info :
Model No : T-Mobile_LEO
Platform : PocketPC
Radio : 2.10.50.26
OS : 5.2.21892
Protocol : 15.39.50.07U
What to do ?????
Click to expand...
Click to collapse
Well, sorry for taking so long to reply, but your problem seemed to lay on te cable cord o maybe on you Bootloader version, I don't remember well enoght to say exactli whats your problem. Sorry

Well ...
Django64 said:
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....
Click to expand...
Click to collapse
sharedito said:
No problem, I made this post log time ago, but I'm glad to know at least it helped. And lol, I have parts of HD2 too, I am now on a i777, so let's see how it goes
Click to expand...
Click to collapse
Well ... Dear Friend ... I'm Sure you missed Something so lets check This :
1- The Windows Should be XP ( If have 7 You need To install active sync and HTC Drivers To make the "Serial" ( In boot loader ) cange ino "USB")
2- Try HD2Toolkit ( thanks to @ksubedi )To install any Of MAGLDR or CLK
..: Good Luck :..
With Best Wishes
Hitman1376​

Thanks
hitman1376 said:
Well ... Dear Friend ... I'm Sure you missed Something so lets check This :
1- The Windows Should be XP ( If have 7 You need To install active sync and HTC Drivers To make the "Serial" ( In boot loader ) cange ino "USB")
2- Try HD2Toolkit ( thanks to @ksubedi )To install any Of MAGLDR or CLK
..: Good Luck :..
With Best Wishes
Hitman1376​
Click to expand...
Click to collapse
Maybe I missed about HD2Toolkit, but the steps I wrote, I executed them on Windows 7 and it all worked perfectly several times, and yet indeed you need either the drivers, that I downloaded throught Windows Update, or ActiveSync from the HTC webpage, or you can just google them, but I agree on the fact that Windows XP is better when flashing any device, and HD2Toolkit, if you can get your hands on it, is a very useful set of tools, depending on what you want to do
Thanks a lot Hitman1376

Glad to hear that ...
sharedito said:
Maybe I missed about HD2Toolkit, but the steps I wrote, I executed them on Windows 7 and it all worked perfectly several times, and yet indeed you need either the drivers, that I downloaded throught Windows Update, or ActiveSync from the HTC webpage, or you can just google them, but I agree on the fact that Windows XP is better when flashing any device, and HD2Toolkit, if you can get your hands on it, is a very useful set of tools, depending on what you want to do
Thanks a lot Hitman1376
Click to expand...
Click to collapse
Gladt to know I could help ... Was my duty ... Good luck
With Best Wishes
Hitman1376​

I installed this MAGLDR (it says aMAGLDR v1.13 at the top), but cannot set AD SD dir, when I go to Services->BootSettings, highlight 3. AD SD Dir and press left button (Green?) it goes straight to MAGLDR home, giveing me no option to choose folder.
Partitions on my SD card:
1. Unallocated - 8MB
2. FAT32 - 17,2GB
3. Ext4 - 1GB
4. Ext4 - 4.1GB
5. Unformatted - 7GB
If I understand right it should see 2 as /sdcard and (after flash of Android) - 3 as /system and 4 as /data?
Forgot setting FAT32 as primary... idiot...