Related
[26.03.12] THE ULTIMATE GUIDE FOR YOUR HTC HD2 -must read! --->ASK QUESTIONS HERE<---
IF YOU HAVE ANY SUGGESTIONS ON SOMETHING ELSE I SHOULD ADD TO THE THREAD, PLEASE REPLY, AS I WANT THIS THREAD TO BE HELPFUL FOR EVERYONE, AND A THREAD WHERE PEOPLE CAN FIND THEIR ANSWERS, INSTEAD OF MAKING NEW THREADS ASKING THE SAME QUESTION.
Hey guys. I have read alot of threads where people are having similar issues, which is actually really easy to fix. I'm not going to write 500 words explaining it.. Just follow those steps bellow
Fix most similar issues (CLEAN INSTALL):
MAKE SURE YOU HAVE HSPL 2.08 http://forum.xda-developers.com/showthread.php?t=611433
Task 29 simply clears all the cache, data everything on your phone.. it makes your phone brand new.
1. download task 29 http://forum.xda-developers.com/showthread.php?t=644781
2. enter bootloader mode (hold volume down button while clicking on power button once) PS: make sure your phone is off.
3. install task 29
now you will have nothing on your phone.
4. install radio Leo_RADIO_2.15.50.14 http://forum.xda-developers.com/showthread.php?t=611787 (highly recommended rom for mostly nand roms)
You can now flash an android rom. (if you have to install it with cwm, look at the instructions below:
How to install CWM on MAGLDR (NOT CLK!)First install magldr (run updateutility.exe as an admin) http://forum.xda-developers.com/showthread.php?t=893618
If you want to install Clockwork Mod download CWM. You will see 3 versions. 150mb, 250mb and 400mb. To know which one to flash, check what the chef of your android rom has written. If not, ask him
Download: http://forum.xda-developers.com/showthread.php?t=987531 (scroll down)
(make sure your phone is turned off) Turn on your phone. Hold down the power button untill you enter MAGLARD. CLick on usb flasher. Now right click on DAF.exe (clockworkmod) and run as an admin. After flash is done, you are ready to flash an android rom trough Clockworkmod. Go to ad recovery and install your rom
Clk and MAGLDR are differant bootloaders!Clk:
- charge while phone is turned off
- better rom manager support
- faster bootup
- Open source
- PPP
Magldr:
-Wp7 support
-Rmnet
-Tetris Support
How to install CLK the professional way:download:
clk1.4_150mb (3).rar
cLK_recovery_3.0.2.5 (4).zip / recovery_3.2.0.0_leo.img is the newest recovery
fastboot drivers for manual installation (2).rar http://www.mediafire.com/download.php?3xbr1nqoonhkcrh
ALL THE DOWNLOAD LINKS, EXEPT FASTBOOT DRIVERS, ARE ATTACHED BELOW!
extract them all.
1. Now install clk 1.4 as you would install wm 6.5/task29 etc.
2. When that is done, you should see a code on your phone. Now install the fastboot drivers. (go to contol panel, drivers. You will see android with a yellow "!" there. Click on it, and choose install manually, the locate to fastboot drivers.rar and install it. (after the installation is done, you should see (fastboot processing commands on your phone)
3. Put the clk_recovery into the data.rar folder. Now hold "shift" on your keyboard, and right click no your mouse. Choose "open command prompt here". Now type in: fastboot flash recovery clk_recovery_3.0.2.5.img.
4. When the flash is done, type in fastboot reboot. NOW PRESS THE HOME BUTTON ON YOUR PHONE QUICKLY, and install the rom through CWM.
Sources: http://forum.xda-developers.com/showthread.php?t=901305
http://forum.xda-developers.com/showthread.php?t=987531
HOW TO INSTALL CLK, THE NEWB WAY TOOLKITS (MAKES INSTALLiING CLK
MUCH MORE EASIER!
http://forum.xda-developers.com/showthread.php?t=1090783
(ClockWorkMod 3.2.0.0 Installer/Updater/Partitioner)
(new toolkit!) http://forum.xda-developers.com/showthread.php?t=1136644
Clk 5.x.x.x Fastboot commands:
Code:
Fastboot command list and usage:
fastboot oem help
- This simple help
fastboot oem cls
- Clear screen
fastboot oem part-add name:size
- Create new partition with given name and size (in Mb, 0 for autosize all space)
- example: fastboot oem part-add system:160 - this will create system partition with size 160Mb
fastboot oem part-resize name:size
- Resize partition with given name to new size (in Mb, 0 for autosize all space
- example: fastboot oem part-resize system:150 - this will resize system partition to 150Mb
fastboot oem part-del name
- Delete named partition
fastboot oem part-create-default
- Delete curent partition table and create default one
fastboot oem part-read
- Reload partition layout from NAND
fastboot oem part-commit
- Save curent layout to NAND. All changes to partition layout are tmp. untill commited to nand!
fastboot oem part-list
- Display current partition layout
fastboot oem part-clear
- Clear current partition layout
fastboot oem format-all
- WARNING !!! THIS COMMAND WILL FORMAT COMPLETE NAND (except bootloader)\n - ALSO IT WILL DISPLAY BAD SECTORS IF THERE ARE ANY
- !!! THIS IS EQUIVALENT TO TASK 29 !!!
Remember to commit partition layout after you are satisfied with it !!!
GPS FIX - http://forum.xda-developers.com/showthread.php?t=953630
http://forum.xda-developers.com/showthread.php?t=1100114 (guaranteed working! got gps lock in 2 seconds)
To make the gps lock even faster, remember to edit the gps.conf file inside system/etc to the location where you live. You can find the ntp pool server from here:
http://www.pool.ntp.org/en/
check my sign for a guide with pics
Fix mini FC issues/wifi not workingStuck at android screen or cm7 loading screen? try this:
At clockworkmod (option 8) wipe cache, factory reset, then go to advanced and wipe dalvik chache and battery stats, if it doesnt work, try to reinstall everything. (sometimes, just reinstalling the rom works) + MAKE SURE YOU ARE USING THE RIGHT CLOCKWORKMOD, IF NOT YOU HD2 WILL BE STUCK AT ANDROID SCREEN,,,,,,, if you dont have the right radio, it will be stuck at htc screen.
If you get : nand kernel open failed, make sure you are trying to install a MAGLDR rom and not a CLK ROM
If your wifi is not working, do a task29, then wipe cache/data/dalvik cache from cwm. Then reinstall the rom.
to fix wifi issue, try wiping cache and dalvik cache, flash the kernel and fix permissions. You can also try to replace the wpa_suppliciant from your rom.
Nand USB Init Failed on MAGLDRTry this: http://forum.xda-developers.com/showthread.php?t=895655
If that doesn't work, make sure you are running DAF.exe as an admin
Fix robotic voice issue:1. First solution, disable “Audible touch tones” from the “Sound Settings” menu(just uncheck the box) and reboot your phone. (Note: Disable it right after you flash a new ROM and reboot, that way your phone system will remember it.) So, no more Robo Voice for you.
2. Second solution, while you experienced the Robotic-Voice call, enable the loud speaker, and disable it. You will have no more Robotic-Voice until your next boot.
How to fix robotic voice sound issue
How to fix the 2 seconds delay issueHead over to this thread: http://forum.xda-developers.com/showthread.php?t=1222427
confirmed working on many people, (mostly magldr), worked on me (I'm usng Clk) (update [Sep] WWORKING ON ALL AUO SCREENS!)
HOW TO FIX RANDOMLY REBOOTING ISSUE!Go to settings - Wireless & Networks - Mobile Networks - Network operators, search for operators, then choose your operator.
Ever since android nand came out, I had randomly reboots, after doing this, it never happened again.
It can also happen because of under/overvolting.
I HAVE TRIED EVERYTHING, BUT NOTHING WORKS!!ok, try this
- Download a stock Rom from htc.com
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
(after it is done, install hspl 2.08, radio 2.15, clk/magldr, and from cwm wipe data/cache/dalvik cache)
(http://forum.xda-developers.com/showthread.php?t=609477)
My Icons are to small!Locate to system using root explorer. Open build.prop, and edit the lcd density. 240 is normal. You can do this before flashing a rom too.
My battery life is so bad/ I want more RAM!!!
Try to remove the widgets you are not using.
Dont use live wallpapers.
Dont turn on wifi/gps/cellular data/bluetooth unless you need it!
-------------------------------------------------------------------------------------------------------------------------------------
Recommended gingerbread 2.3/2.4 roms:
TyphooN CyanogenMod
HyperDroid-CM7
NexusHD2-Gingerbread (no cyanogenmod)
HyperDroidGBX
Recommended sense roms:
HD2 CoreDroid HD
CMYLXGOs Stock Desire HD
RAFDROID HD
Extra info:
Save battery while running ANY Android build
How to Install NAND Android on HTC HD2 w ClockWorkMod Recovery
The Definitve Guide To Android On HTC HD2
RAM, Speed ,Battery SAVE,NO HOME REFRESH, Tweaks for CM7 HTC HD2 2.3.4
HD2 Android NAND Development - Sticky Roll-Up Thread
I hope this fixes your issues.
Feel free to ask questions
I'm not responsable for any damage on your device. ^^ and if you want cookies, go buy it.... duuh
Radio Install is not needed Task29 does not remove your Radio,SPL,or Splash Screen.
Maybe you can also explain how dalvic and other caches do work in magldr?
Seems the OP's love the CWM and are developing more and more that way.
wrecless said:
Radio Install is not needed Task29 does not remove your Radio,SPL,or Splash Screen.
Click to expand...
Click to collapse
Yes, I know that, but radio 2.15 is recommended by alot of chefs.. That's why I included it in my post.
thanks a lot man. task29 helped me with installing a clean Android build after I had set up dual boot to WP7 & SD Android and wanted to go back to Android
aditya_r12 said:
thanks a lot man. task29 helped me with installing a clean Android build after I had set up dual boot to WP7 & SD Android and wanted to go back to Android
Click to expand...
Click to collapse
I'm glad to hear that
Hey! Very good thread! I have a question, i have a ROM but i want change this ROM to another. How do i do? Thank You very much!
yz.hd said:
Task 29 simply clears all the cache, data everything on your phone.. it makes your phone brand new.
download task 29 http://forum.xda-developers.com/showthread.php?t=644781
Click to expand...
Click to collapse
Hey. I cant do that because i have this error:
ERROR [260]: CONNECTION
Rafa1986 said:
Hey. I cant do that because i have this error:
ERROR [260]: CONNECTION
Click to expand...
Click to collapse
anyone please? i have my mobile phone connected with my pc. Thank You.
Rafa1986 said:
anyone please? i have my mobile phone connected with my pc. Thank You.
Click to expand...
Click to collapse
Do you have Activesync ? if you dont, uninstall and isntall again. then try. You have hspl right ?
Rafa1986 said:
Hey! Very good thread! I have a question, i have a ROM but i want change this ROM to another. How do i do? Thank You very much!
Click to expand...
Click to collapse
You want to install a custom rom? like android.. or a normal rom ?
GPS issues on all roms
Do you know if it fixes some issues like the GPS making the screen freeze and the phone lock up? My roms are running well, I only have that problem when I use GPS.
P.S.: I've already configured the gps.config for my location (Brazil) and the GPS is finding the satellites very fast but the it make the phone crashes very often
Hi, great thread! Thanks for the info.
I have a question about the SD-card. Is it necessary to format the card before installing a ROM? And if so what format (FAT32 or..)?
Thanks and regards but what problems that requires this meathod to be fixed
Thanks for the info.
metalican said:
Hi, great thread! Thanks for the info.
I have a question about the SD-card. Is it necessary to format the card before installing a ROM? And if so what format (FAT32 or..)?
Click to expand...
Click to collapse
No, it isn't. If you do, FAT32 works fine
Digital Outcast said:
No, it isn't. If you do, FAT32 works fine
Click to expand...
Click to collapse
+1 to that
hoss_n2 said:
Thanks and regards but what problems that requires this meathod to be fixed
Click to expand...
Click to collapse
phone randomly reboots, laggy phone, stuffs not working etc.
SonyGlamber said:
Do you know if it fixes some issues like the GPS making the screen freeze and the phone lock up? My roms are running well, I only have that problem when I use GPS.
P.S.: I've already configured the gps.config for my location (Brazil) and the GPS is finding the satellites very fast but the it make the phone crashes very often
Click to expand...
Click to collapse
happened to me to, but i changed my rom, it's not happening anymore something in the rom you are using may cause your phone crash when you use your gps. Maybe you should ask the chef of the rom if the issue is familiar, and if it is a fix for it ?
yz.hd said:
happened to me to, but i changed my rom, it's not happening anymore something in the rom you are using may cause your phone crash when you use your gps. Maybe you should ask the chef of the rom if the issue is familiar, and if it is a fix for it ?
Click to expand...
Click to collapse
Which Rom are you using?
hey guys i dont wanna sound like a dumbass or anything
but ive been trying to install these two roms for a long tiime now and i just cant seem to get it done
if anyone would be kind enough to tell me like a step by step and what software i need to do it..IT WILL BE GREATLY APPRECIATED.
http://forum.xda-developers.com/showthread.php?t=1038694
http://forum.xda-developers.com/showthread.php?t=1112810
thanks alooooot guys and i appreciate it in advance.!
the first one is quite simple (i think you use winmo). download and unrar it.find the folder android and copy this folder to the root of your sd.then in phone explorer go to sd-find folder android-click clrcad then haret-you'll see something like 'starting linux'.it may take half an hour at the first loading.each time you reset you go to winmo,so in order to go to android you'll do clrcad-haret.
the second ron is a nand rom.for that you must wipe winmo.
i forgot winmo is windows mobile
im already on android running 2.3.3. with sense ..any way i can get these two roms to work through android?
please and thanks
please guys, if any of u could help ..im really tryina get at least one of these working. please and thanks
do you have mgldr in phone? i should also say that these roms aren't stable yet. their camcorder doesn't work properly and tyey have graphic glitches(whit horizontal stripes)
yeah thats what i read but i wanted to try either way
what could u suggest that has sense, and is something somewhat advance? 720p or 3d... and that new sense 3.0 lockscreen?
thanks mate!
http://forum.xda-developers.com/showthread.php?t=1075703
http://forum.xda-developers.com/showthread.php?t=1185087
i can say these two are the best as sense 3 roms.they record 720p but laggy and only can be watched by paid app vplayer.you can find necessary informations in their op. for sd rom you can use the one you mentioned in op.
im sorry to sound like an idiot again..
but how do i install these two? because im more familiar with the ZIP way ,where i just copy them to sd card..go to boot menu and load them
thank u again mate!
these are zip files. do you know how to make nand partition? if not download and install this tool. download the rom you choose and put to your sd. make an sd-ext partition of 1 gb in sd (if you don't have one).then ask again when you are ready.also say which rom you have chosen.
http://forum.xda-developers.com/showthread.php?t=1090783
I'm using the dungphp 2.0 ROM. Runs great except the camcorder lag. Scroll down just a bit on the page and they give you step-by-step directions.
http://forum.xda-developers.com/showthread.php?t=1075703&page=538
hoss93 said:
I'm using the dungphp 2.0 ROM. Runs great except the camcorder lag. Scroll down just a bit on the page and they give you step-by-step directions.
http://forum.xda-developers.com/showthread.php?t=1075703&page=538
Click to expand...
Click to collapse
do i download the MAGLDR version or the clk?
ehi , do you have mgldr or clk or none of them in your phone? restart your phone and hold down power key if you see mgldr menu then you have mgldr. if not then you have clk. control and inform.
mutil said:
ehi , do you have mgldr or clk or none of them in your phone? restart your phone and hold down power key if you see mgldr menu then you have mgldr. if not then you have clk. control and inform.
Click to expand...
Click to collapse
i got mgldr, i got it when i first flashed my phone from windows..
so is that mean i download the magldr version and just run it thru bootloader?
no in mgldr you dont use bootloader to flash rom.first download and install this tool to your pc http://forum.xda-developers.com/showthread.php?t=1090783
if you have an eu hd2 you should also have an sd-ext partition of at least 1 gb. meanwhile download mgldr version of the rom and be careful if it is eu or tmous.put it to your sd.when you complete these turn here again.
mutil said:
no in mgldr you dont use bootloader to flash rom.first download and install this tool to your pc http://forum.xda-developers.com/showthread.php?t=1090783
if you have an eu hd2 you should also have an sd-ext partition of at least 1 gb. meanwhile download mgldr version of the rom and be careful if it is eu or tmous.put it to your sd.when you complete these turn here again.
Click to expand...
Click to collapse
alright so i tried just loading it into bootloader, and it got stuck on the htc; quietly brilliant screen
now i got the hd2 toolkit.. what do u flash with it?
you can flash many things with it. now you'll make a nand partition. you didn't say but i think you have ah eu hd2 (512 mb). if not warn me. now connect your phone to pc. go to mgldr menu(i hope it still works) choose flasher.see usb flasher...usb.then in nand toolkit choose mgldr repartition-choose partition size 'custom'-choose cache size 5-at left bottom choose repartition.write 240 in the opening window.
after installation complete in mgldr menu choose ad recovery-install zip from sd-choose zip from sd-find your rom.zip. after installation is complete reboot.
nope i have a tmobile us hd2
i edited my former post according to tmous.follow and ask for help if you stuck.
this is what it says at the end in HD2 toolkit:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
and before that it said.. the program cant start because RAPI.dll is missing from ur computer. try reinstalling the program to fix this program.
help???
in mgldr menu(list with 12 choices) did you go to usb flasher choice
Dear all,
I've just bought a HD2 from my friend. This phone is using windows mobile..i'm a newbie here and need your help to transform my device from windows mobile to android 2.3(Gingerbread). Kindly please let me know step by step process so that i can follow it thoroughly. I'm from Malaysia and cannot download from multiupload.. please upload using rapidshare or mediafire if there is any file i need to download.. Thank You Very Much..
If you don't have Hard SPL installed and the right Radio ROM, then you won't be able to flash stuff. You need HSPL2.08 to run Android / WP7 / MAGLDR:
http://forum.xda-developers.com/showthread.php?t=611433
The next thing you need is a Radio ROM that supports 512 MB RAM
http://forum.xda-developers.com/showthread.php?t=611787
READ THOSE THRADS CAREFULLY AND FOLLOW ALL INSTRUCTIONS!
The first thing you have to do is go to this thread and download the HD2 Nand Toolkit from this thread:
http://forum.xda-developers.com/showthread.php?t=1090783
1. Then you'll need to turn off your HD2 and while pressing the volume donw key you need to press the power button in order to get to a three color screen (the bootloader).
2. Connect your HD2 to your PC and wait until you see USB at the end of your screen.
3. Start the Toolkit and press Task29. This will erase Windows Mobile.
4. Again go into bootloader (three color screen) and press install Magldr from Toolkit.
5. After that installation you need to hold down the power button while your HD2 is booting and you'll have the Magldr menu.
6. Choose point 4 "USB Flasher" and connect your phone to your PC.
7. Choose the right partition size for your NAND ROM on the left hand side from the Toolkit and your partition size (infos are available at the ROM thread of your choise).
8. By using a card reader or point 4 of Magldr menu ("USB storage") copy your ROM update .zip file to the root of your formated fat32 SD card.
9. Press update and let it work. Wait until your HD2 booted up again, chose menue point 8 "Ad Recovery" and this'll take you to Clockworkmod.
10. Choose "install update .zip" from that and then "choose zip"
11. Go to your rom file and let it work. After that you should be able to use Androind on NAND.
The post above mine is a very good post. But to be honest all you really need to do is to download the HD2 NAND Toolkit, the .zip file for the ROM of your choice, a radio version that is 2.08.50.?? or higher (this is only if you have EU HD2, T-Mobile HD2's don't need different radio), the Windows Mobile drivers that come with the Active Sync or Windows Mobile Device Center software from Microsoft, and if you want to use clk instead of MAGLDR you will need the Google Android drivers. For way more details on all of this click on the guide linked in my signature.
Also the you can use the HD2 NAND Toolkit to flash anything you need to use Android on your HD2.
hi..newbee here..
I make the change of my windws phone to android last year and it works fine but it lose the "look"of the htc like the clasic home page clock widget and weather feature,like sence, is there a fix for this or i will need another android program??
thnx!
Hopefully I understod you correctly
So you want "stock" HTC Android home screen? On which version are you? Sense version I mean? It's quite simple. On yyour home screen you'll only have to chose "+" in the left bottom. From there you're able to choose HTC widgets like the "stock" clock. Simply press on add a wigdet and choose your HTC clock.
das123 said:
hi..newbee here..
I make the change of my windws phone to android last year and it works fine but it lose the "look"of the htc like the clasic home page clock widget and weather feature,like sence, is there a fix for this or i will need another android program??
thnx!
Click to expand...
Click to collapse
Sounds like you are probably using a CM ROM, a ROM based off CM, or a ASOP ROM. These ROMs do not have HTC Sense. If you want the the same feel of the HTC Sense that was on the Windows Mobile ROMs then you will have to pick out a ROM that has HTC Sense in it, or what is referred to as Sense.
Hi,i am reading this forum since april and i still can't install android on my HTC HD2.Can somebody support me on team viwer?
I will appreciate that.
Thanks
Banica Dardu said:
Hi,i am reading this forum since april and i still can't install android on my HTC HD2.Can somebody support me on team viwer?
I will appreciate that.
Thanks
Click to expand...
Click to collapse
The guides are really simple. All you need to do is read evrything carefully. All the steps are layed down and are very clear. Would u like me to reccomend a guide?
Sent from my HD2 using XDA
http://forum.xda-developers.com/showthread.php?t=. There you go. Read carefully
Sent from my HD2 using XDA
After instaling Task 29 with Radio 2.15.50.14 windows won't run.It say green HTC and don't startup.
Thanks a lot for **** up my phone ...
What i can do ?
download radio '2.15.50', the 'nand toolkit' and 'paranoidandroid' rom from android NAND section. (You can change later, i'm just keeping it simple.)
phone into bootloader (voldown and power)
connect USB
when the word 'serial' changes to 'USB' on phone screen, ,
run hspl4.exe and choose 2.08.hspl NOT 2.08.0000, it MUST be 2.08.hspl ONLY.
when phone reboots, hold voldown to return to bootloader
serial changes to --> USB
install the radio (either run the customRUU.exe that came with teh radio,
OR
in the nand tookit, at the bottom left ''browse|install RUU'' choose browse and find the radio file you downloaded (RUU_Signed.nbh probably) then click install RUU
when phone reboots, quickly hold voldown to return to bootlaoder
when serial --> USB
in the NAND tookit click 'install magldr'
when phone reboots, don't touch it, it will start the magldr menu. if it doesn't,. you probably skipped the radio step.
In the magldr menu choose USB flasher
in the nand toolkit at the top left make sure 'magldr repart' is selected, then below that click the 150 MB
below that type 5 in the cache size box
then in the bottom left click 'repartition'.
when phone reboots let it load the magldr menu,
choose option 8 - AD recovery - this will start clockworkmod
in the clockwork mod menu choose mounts and storage - mount sd card-
copy the paranoid android rom.zip (dont unzip it) to your sd card
(you can also do this through a card reader if you have one)
still in clockwork mod, press end to step back untill you see the 'install zip from sd ', select that, then 'choose zip from sd' , , find where you copied the rom to, select it, sit back, let it install, then choose reboot system now.
done.
zzz i'm newbie,it looks a bit hard....
Can u support me via Team viwer pls? ...ofc if u have time..
It can't be more simple.. You can also use HD2 Toolkit thread (with screenshots). Link in my signature.
Sent from my HTC HD2 using XDA App
If anybody can help me via Team Viwer i wait messages/PMs....
Thanks..
If you find a list of step by steps complicated, then no offence but you probably shouldn't be flashing.
Why not try SD Android?
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Banica Dardu said:
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Click to expand...
Click to collapse
If you just read everything carefully you won't have any problems. As samsamuel said you can't get simpler than that and just use SD Android if you don't know what to do.
Sent from my NexusHD2 using XDA
Banica Dardu said:
I tryed all steps but i do something wrong.
.....sd version and many things.I have to go in vacantion in 1 week and i wanted android fast.
That hurry made me crash it...
I can't fix it and no1 want help me with Team viwer so ....
I will try to **** it until it works or i drop it...
Click to expand...
Click to collapse
listen and read this CAREFULLY. In order to install android on your internal memory ie. NAND installation, you have to follow these steps,
1. Install HSPL 2.08
2. Install Radio 2.15
3. Install MAGLDR or clK ( BOOTLOADERS )
4. Install CWM(clockworkmod recovery)
5. Install the Rom via CWM
6. Voila
You can google how to do this. Flashing means installing(if you dont know)
This is a very simple guide which takes you through all the above steps and all files are available for download. READ READ and READ somemore
http://forum.xda-developers.com/showthread.php?p=11097380
Just a bity of help with installing the ROM on the HD2
adil1508 said:
listen and read this CAREFULLY. In order to install android on your internal memory ie. NAND installation, you have to follow these steps,
1. Install HSPL 2.08
2. Install Radio 2.15
3. Install MAGLDR or clK ( BOOTLOADERS )
4. Install CWM(clockworkmod recovery)
5. Install the Rom via CWM
6. Voila
You can google how to do this. Flashing means installing(if you dont know)
This is a very simple guide which takes you through all the above steps and all files are available for download. READ READ and READ somemore
http://forum.xda-developers.com/showthread.php?p=11097380
Click to expand...
Click to collapse
Sometimes you may run into strange problems when you install the ROM.
Therefore, my recommendation is after installing CWM do:
- Partition your HD2 (using HD2 Tool) 170 Mb (Custom) and 5 Mb Cache
- Copy your ROM to the SD Card (Using USB Mount in CWM)
- Flash your ROM using Choose ZIP from SD Card
- Waitn till it has finished
- FLASH YOUR ROM A SECOND TIME (This may solve written data to Bad Blocks)
- Do not reboot but go to Advanged in CWM and do Error Report
- Copy Recovery.log to your PC Using USB Mount and check this with your favourite Wordprocessor (eg. MS-Word) and look for errors
- if there are errors, try flash again of go back and create a bigger partition (5 Mb Increments will work)
- if OK, then reboot type your SIM/PIN ans leave the phone alone for 5 nimutes at least (all sorts of homekeeping going on)
- Log on using your Google account and after you finish, let the phone finish all synchronisations (may take 10 minutes)
- Then fix your Google Play and start installing apps.
Worked for me
utrecht56 said:
S........... my recommendation is after installing CWM do:
- Partition your HD2 (using HD2 Tool) 170 Mb (Custom) and 5 Mb Cache.
Click to expand...
Click to collapse
During the partitioning process is when CWM is installed, , partitioning wipes / resets the recovery partition, and loads cwm into it, so partitioning 'after' installing cwm is nonsensical.
I assume what you're essentially pointing out is that you have to select a partition size when installing CWM anyway so you may as well do it right the first time, right? Just wanted to clarify to anyone who was unsure of what this meant.
Sent from my NexusHD2 using XDA
yea. for most users, 'partitioning' and 'installing cwm' are the same step. Certainly for magldr, , , perhaps cLK is a little different, but i suspect anyone that knows how to apply cwm without repartitioning, how-to lists don't apply to. Anyone that needs a list, however, could do without teh confusaion of figuring out how to apply cwm and THEN partition.
Hi, I've been having some trubles to find the way to first, update MaGLDR to 1.13, then install ClockworkMod Recovery and finally MIUI ROM. First I googled how to update MaGLDR to 1.13, but I couldn't follow the directions I found on the original thread, I didn't had ActiveSync. So I'm writing this thead so if someone has the same problems as I had, I hope this can help someone. And if you want to install any other ROM, this may be usefull too. I find the ROM installation from Recovery easier and faster then installing it by RUU, but, that's my opinion.
I want to make clear that all the files on this post are not my work, I just uploaded again, so you can find anything you need on this same post. I'll upload the MIUI ROM for HD2 too, I just want to add, that I rather this ROM for HD2 beacause it is very light and fast, but that's just my opinion too.
Before we begin, make sure your HD2 battery is at least 50% charge. So, let's begin.
Updating MaGLDR to 1.13 version
Downloads
MaGLDR v1.13
http://forum.xda-developers.com/attachment.php?attachmentid=1553616&stc=1&d=1355196631
As I mentioned it, my problem was to stablish an ActiveSync connection with the PC, so to solve that I've conected my HD2 on boot mode.
1. Connect your HD2 on boot mode(holding volume down key + Power button).
2. Wait for Windows to install drivers
3. Decompress the content of the file above on an empty folder
4. Rigth click on the ROMUpdateUtility.exe file and select Run as Administrator
5. Click the check box and click next, and repeat
6. Your phone will show a screen saying HTC with a progress bar for a little while, once it finishes it will restart, hold the power button so it shows the MaGLDR menu options, the option AD Recovery should be on the menu, and there you got, you just updated MaGLDR to 1.13 version.
Installing ClockworkMod Recovery
Before you choose which file to download here is an explanation from the original thread.
Q. I dont know which partition size to download
A. Depending on what type of roms you plan on using, you should choose the partition size based on the following.
150MB Partition - For bare roms including CyanogenMod, AOSP, and MiUI
250MB Partition - For Standard sense roms including Desire and EVo based ROMs, can also be used for some squashed HD builds
400MB Partition - For Larger roms including unsquashed Desire HD and Z roms, ROMs REQUIRE data2sd for EU HD2 with 512MB NAND
Downloads
Recovery v1.3 150MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553658&stc=1&d=1355196154
Recovery v1.3 250MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553671&stc=1&d=1355196518
Recovery v1.3 400MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553673&stc=1&d=1355196627
1. Turn on your phone and hold Power button until MaGLDR menu shows up
2. Select USB Flasher option and press Send(Green button)
3. Wait for windows to install drivers
4. Decompress the content of the file you choose to download on an empty folder and right click on the DAF.exe file and click Run as Administrator
5. Wait until the program detects the phone and follow the instructions until the program has finished
6. Detach the phone and turn it on and hold Power button so you can access to the MaGLDR menu
7. Select the AD Recovery option and you'll see the Recovery menu
Installing MIUI ROM
Personaly I like to create a SD partition, so here are the steps once you are into the Recovery
1. Select advanced click Send
2. Select Partition SD Card
3. Select the size of the Ext partition
4. Select the size of the swap file
5. Select Yes
Downloads
MIUI ROM Android HD2 2.4.20
http://www.mediafire.com/download.php?w6ul6y9cne5yhvc
1. Download the zip file to your SD ROM, do not decompress and insert your SD card in your phone
2. Turn on your phone into MaGLDR menu, select AD Recovery option and press Send
3. Select install zip from sdcard
4. Select choose zip from sdcard
5. Select the miuiandroid_HD2-2.4.20.zip
6. Select Yes and wait for the installation to end
7. Select reboot system now and wait for your phone to start, the forst time it takes a few minutes and there you got.
This may be a little repetitive, may be you can find some more information on other posts, but this is my first one and I just want to help because I tryed two days to figure out how to flash my HD2 and maybe this post will help someone to don't take that much time on searching. So thanks anyway
sharedito said:
Hi, I've been having some trubles to find the way to first, update MaGLDR to 1.13, then install ClockworkMod Recovery and finally MIUI ROM. First I googled how to update MaGLDR to 1.13, but I couldn't follow the directions I found on the original thread, I didn't had ActiveSync. So I'm writing this thead so if someone has the same problems as I had, I hope this can help someone. And if you want to install any other ROM, this may be usefull too. I find the ROM installation from Recovery easier and faster then installing it by RUU, but, that's my opinion.
I want to make clear that all the files on this post are not my work, I just uploaded again, so you can find anything you need on this same post. I'll upload the MIUI ROM for HD2 too, I just want to add, that I rather this ROM for HD2 beacause it is very light and fast, but that's just my opinion too.
Before we begin, make sure your HD2 battery is at least 50% charge. So, let's begin.
Updating MaGLDR to 1.13 version
Downloads
MaGLDR v1.13
http://forum.xda-developers.com/attachment.php?attachmentid=1553616&stc=1&d=1355196631
As I mentioned it, my problem was to stablish an ActiveSync connection with the PC, so to solve that I've conected my HD2 on boot mode.
1. Connect your HD2 on boot mode(holding volume down key + Power button).
2. Wait for Windows to install drivers
3. Decompress the content of the file above on an empty folder
4. Rigth click on the ROMUpdateUtility.exe file and select Run as Administrator
5. Click the check box and click next, and repeat
6. Your phone will show a screen saying HTC with a progress bar for a little while, once it finishes it will restart, hold the power button so it shows the MaGLDR menu options, the option AD Recovery should be on the menu, and there you got, you just updated MaGLDR to 1.13 version.
Installing ClockworkMod Recovery
Before you choose which file to download here is an explanation from the original thread.
Q. I dont know which partition size to download
A. Depending on what type of roms you plan on using, you should choose the partition size based on the following.
150MB Partition - For bare roms including CyanogenMod, AOSP, and MiUI
250MB Partition - For Standard sense roms including Desire and EVo based ROMs, can also be used for some squashed HD builds
400MB Partition - For Larger roms including unsquashed Desire HD and Z roms, ROMs REQUIRE data2sd for EU HD2 with 512MB NAND
Downloads
Recovery v1.3 150MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553658&stc=1&d=1355196154
Recovery v1.3 250MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553671&stc=1&d=1355196518
Recovery v1.3 400MB
http://forum.xda-developers.com/attachment.php?attachmentid=1553673&stc=1&d=1355196627
1. Turn on your phone and hold Power button until MaGLDR menu shows up
2. Select USB Flasher option and press Send(Green button)
3. Wait for windows to install drivers
4. Decompress the content of the file you choose to download on an empty folder and right click on the DAF.exe file and click Run as Administrator
5. Wait until the program detects the phone and follow the instructions until the program has finished
6. Detach the phone and turn it on and hold Power button so you can access to the MaGLDR menu
7. Select the AD Recovery option and you'll see the Recovery menu
Installing MIUI ROM
Personaly I like to create a SD partition, so here are the steps once you are into the Recovery
1. Select advanced click Send
2. Select Partition SD Card
3. Select the size of the Ext partition
4. Select the size of the swap file
5. Select Yes
Downloads
MIUI ROM Android HD2 2.4.20
http://www.mediafire.com/download.php?w6ul6y9cne5yhvc
1. Download the zip file to your SD ROM, do not decompress and insert your SD card in your phone
2. Turn on your phone into MaGLDR menu, select AD Recovery option and press Send
3. Select install zip from sdcard
4. Select choose zip from sdcard
5. Select the miuiandroid_HD2-2.4.20.zip
6. Select Yes and wait for the installation to end
7. Select reboot system now and wait for your phone to start, the forst time it takes a few minutes and there you got.
This may be a little repetitive, may be you can find some more information on other posts, but this is my first one and I just want to help because I tryed two days to figure out how to flash my HD2 and maybe this post will help someone to don't take that much time on searching. So thanks anyway
Click to expand...
Click to collapse
I got error in connection (through ActSync,) what is the solution. i have installed HTCSync but it doesnt detect my device.
Device Info :
Model No : T-Mobile_LEO
Platform : PocketPC
Radio : 2.10.50.26
OS : 5.2.21892
Protocol : 15.39.50.07U
What to do ?????
Easy WAY
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....
No problem
Django64 said:
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....
Click to expand...
Click to collapse
No problem, I made this post log time ago, but I'm glad to know at least it helped. And lol, I have parts of HD2 too, I am now on a i777, so let's see how it goes
Santbohara said:
I got error in connection (through ActSync,) what is the solution. i have installed HTCSync but it doesnt detect my device.
Device Info :
Model No : T-Mobile_LEO
Platform : PocketPC
Radio : 2.10.50.26
OS : 5.2.21892
Protocol : 15.39.50.07U
What to do ?????
Click to expand...
Click to collapse
Well, sorry for taking so long to reply, but your problem seemed to lay on te cable cord o maybe on you Bootloader version, I don't remember well enoght to say exactli whats your problem. Sorry
Well ...
Django64 said:
Hey thanks for this guide, it is the most easiest guide on installing ROM's on the HD2.
I have always run into problems when installing ROM , it always some error, because the MAGLDR file or some
other file is the wrong version etc
I have send days trying to find a quick and problematic free and best way to install ROM's on the HD2,
right now I am on my second HD2 and I am trying to install the latest's Miui ROM's on it,
the first HD2 stop working after I flash it the last time with ROM's and the phone keep freezing frequently, and most time I would have to remove
the battery which eventually damage one of the battery connecting pin, I send it to a repair shop and they made a mess of it
now I have it for parts.thank again.....
Click to expand...
Click to collapse
sharedito said:
No problem, I made this post log time ago, but I'm glad to know at least it helped. And lol, I have parts of HD2 too, I am now on a i777, so let's see how it goes
Click to expand...
Click to collapse
Well ... Dear Friend ... I'm Sure you missed Something so lets check This :
1- The Windows Should be XP ( If have 7 You need To install active sync and HTC Drivers To make the "Serial" ( In boot loader ) cange ino "USB")
2- Try HD2Toolkit ( thanks to @ksubedi )To install any Of MAGLDR or CLK
..: Good Luck :..
With Best Wishes
Hitman1376
Thanks
hitman1376 said:
Well ... Dear Friend ... I'm Sure you missed Something so lets check This :
1- The Windows Should be XP ( If have 7 You need To install active sync and HTC Drivers To make the "Serial" ( In boot loader ) cange ino "USB")
2- Try HD2Toolkit ( thanks to @ksubedi )To install any Of MAGLDR or CLK
..: Good Luck :..
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Maybe I missed about HD2Toolkit, but the steps I wrote, I executed them on Windows 7 and it all worked perfectly several times, and yet indeed you need either the drivers, that I downloaded throught Windows Update, or ActiveSync from the HTC webpage, or you can just google them, but I agree on the fact that Windows XP is better when flashing any device, and HD2Toolkit, if you can get your hands on it, is a very useful set of tools, depending on what you want to do
Thanks a lot Hitman1376
Glad to hear that ...
sharedito said:
Maybe I missed about HD2Toolkit, but the steps I wrote, I executed them on Windows 7 and it all worked perfectly several times, and yet indeed you need either the drivers, that I downloaded throught Windows Update, or ActiveSync from the HTC webpage, or you can just google them, but I agree on the fact that Windows XP is better when flashing any device, and HD2Toolkit, if you can get your hands on it, is a very useful set of tools, depending on what you want to do
Thanks a lot Hitman1376
Click to expand...
Click to collapse
Gladt to know I could help ... Was my duty ... Good luck
With Best Wishes
Hitman1376
I installed this MAGLDR (it says aMAGLDR v1.13 at the top), but cannot set AD SD dir, when I go to Services->BootSettings, highlight 3. AD SD Dir and press left button (Green?) it goes straight to MAGLDR home, giveing me no option to choose folder.
Partitions on my SD card:
1. Unallocated - 8MB
2. FAT32 - 17,2GB
3. Ext4 - 1GB
4. Ext4 - 4.1GB
5. Unformatted - 7GB
If I understand right it should see 2 as /sdcard and (after flash of Android) - 3 as /system and 4 as /data?
Forgot setting FAT32 as primary... idiot...