Database Users

Bootloops again and again with every Rom I use

Hello Android user
First off all, sorry to bother you with this problem but I already used Google and the searchengine but I wasn't able to find a solution.
I have the HTC hd2 nand flashed with the newest maglrd version. (I am completely new in this scene)
I had Android 2.3.4 installed when I bought this phone but I wished to have an Android with HTC sense so I downloaded an nand Rom for hd2 but it was no use, I got always those screen freezes (boot loops) , till I took an autoinstaller from dark force team and know I am still messing up with a bad moddet 2.2 rom, could someone write an step by step tutorial for me?
I want to get 2.3.4 again (in the best case with sense)
I found a lot of other tuts but I can't understand the meaning of the steps because I am an noob, a tutorial for dummy would be great, I would really appreciate it !
Thanks a lot for reading my thread.
-Zakkusu
Sent from my HTC HD2 using XDA App

you must repartition your nand according to the needs of the rom.at first page of android nand thread there is hd2 nand tool kit dowload it. connect your phone to pc-in mgldr menu choose usb flasher-see usb flasher....usb-in toolkit choose appropriate partition sizes then click repartition. in addition if you are an eu hd2 user you should have sd-ext partition for sense roms.ifyou stuck ask again

Thanks Pal, I will try it !
Sounds pretty easy, I will contact you, if I stuck on my effort, but thanks for the
hint
Awesome !

Zakkusu said:
Thanks Pal, I will try it !
Sounds pretty easy, I will contact you, if I stuck on my effort, but thanks for the
hint
Awesome !
Click to expand...
Click to collapse
Yeah AOSP roms (CM7, etc) use much smaller partitions than Sense roms. For example with a TMOUS HD2 a AOSP rom like Typhoon uses roughly 130mb system partion wheras a Sense rom use 390-400mb partition. If you do not change this and try to flash a Sense rom then you are essentially running out of space before the rom can be fully installed, ergo the bootloop.
Like the previous poster said, check the first page of each rom you download as they usually tell you what size partition to use. Some will even have a daf.exe file for you to flash the appropriate partion & recovery.
Good luck

Hay guys, thanks for your adives but it was no use, I still get those damn loops,
could anyone give me his instant messanger adress, so he could guide me through the installation.
I am pretty dessperate

In your opening post you say "screen freezes(bootloops)"
Which is it? Freezing or looping? Cos they're two different things.
Looping is often associated with power problems such as a bent battery pin, whilst freezing could be not clearing the data/cache/sdext partition, or overheating, (amongst various others)

Important Notice: If you were given a direct link to this post, edit step #8 and choose a ROM you prefer from the NAND sub-forum and edit step #11 and enter the values you get from the ROM's thread/OP.
HD2 Android NAND for dummies:
1-This tutorial assumes that you have HSPL already installed, your device is connected to your pc and you have the latest drivers, please carry on.
1a- Fully Charge your phone (use external charger, or manage yourself!)
2- Go to ksubedi's Thread and download his HD2 NAND Toolkit (thanks ksubedi!)
3- After Installing it, Power Off your device (HD2) and power on into bootloader mode (Power on while Holding Volume down)
4- After seeing ("Serial" changed to "USB") on your phone, run the toolkit with Administrator rights (default).
5-(Optional) From bottom right corner choose "Wipe (Task29)", go through the steps and when your device reboots go into bootloader again (Volume Down and Power On).
6- Choose from bottom right corner "Install MAGLDR", go through the process and when your phone restarts hold the power button (not the volume!)
7- MAGLDR Screen will appear, Go down (using volume rockers) to Option 5. USB Flasher and wait for it to say "wait USB".
8- Go to Tyween's Thread and download his ROM (Thanks tyween)
**8- Typhoon is a CM7 build not sense (Sense takes more NAND Space and can be somewhat laggy and slow )
9-After Downloading the MAG Build, put the ZIP file on your sd card and put it into your phone.
10- On the toolkit, from the top panel choose "MAGLDR Repartition" and from the left panel choose 150mb system partition and from the bottom set the cache size to 5mb then click on repartition and go through it.
11- Reboot your phone into MAGLDR screen (by holding the Power on button)
11-a (Optional) if you think you may need extra storage for your apps/games, create an ext3 or ext4 partition on your sdcard using Easeus Partition Manager on your PC.
12- Go to Option 8.Android Recovery (Using volume rockers) and hit the Green Button (Dial Button) to go to recovery.
13- A Black screen with orange/blue text will show up (This is recovery) go to "Install Zip from sd card" And then choose the second option then choose your recently downloaded ROM and hit green button, now look at step 13a before confirming, then hit yes.
13a- If you chose to create an ext partition on your sdcard in step 11-a, don't forget to either a-select NAND with DataOnExt when installing the ROM. (If supported by ROM) or b-flash an a2sd script after flashing the ROM immediately.
14-a Now it will begin the flashing process, just wait for it.
14-b when it finish, simply choose "Reboot system now" and let the device boot into Android.
14-c After the device has booted, dont touch your phone but let it initialize for at least 3 minutes before using it.
Is this what you asked for?
Please read the following F.A.Q before sending me any PMs or making a post!
F.A.Q:
Q: What do you mean by drivers in step #1?
A: Read this short post.
Q: In step #1, you say "HSPL". What is that? And how do I install it?
A: Read this.
Q: In step #7 my device never says "wait USB"?
A: Sometimes, it may be connected without "wait USB" appearing. You can try to continue without waiting for it. But if the flashing fails, you need to check your steps.
Q: I cannot find the MAG build for the ROM I want?
A: Recently, they have been combining both cLK and MAGLDR into one zip. If the developer doesn't mention cLK or MAGLDR, it's a universal zip so download it and install it.
Q: When installing the ROM, I was asked to use "PPP or RMNET". Which one do I choose?
A: Choose RMNET. (You can choose PPP, but it drops sometimes).
Q: I did all the steps but I am stuck in a bootloop, what do I do?
A: It could be anything, but mostly bad blocks. Increase the system partition by ~20MB.
Q: The ROM I want to use says "SD-EXT" or "EXT partition" is required. What does that mean?
A: It means step 11a is mandatory for you.

Thanks a lot Marvlesz, you really made my day haha
I am fastin because of ramadan and when everyone is eating at shool I just play around with my phone, you realy helped me out of this mess !
Ramadan Kareem Bro!
PS: an very very easy tutorial, very simple, make a thread out of it with some pictures, everyyone would love it

Zakkusu said:
Thanks a lot Marvlesz, you really made my day haha
I am fastin because of ramadan and when everyone is eating at shool I just play around with my phone, you realy helped me out of this mess !
Ramadan Kareem Bro!
PS: an very very easy tutorial, very simple, make a thread out of it with some pictures, everyyone would love it
Click to expand...
Click to collapse
Haha !! it's 2 AM here , 1 hour left before we fast
I'm really glad that I helped you, and there are "simple, easy" tutorials floating everywhere, I dont think another one is essential

too big partition possible? Problems with Pyramid.
RAFdroid works perfect on my HD2 EU. Nand partition is 400.
When I try to install one of the available Pyramid ROMS, they all keep repeating the white/green "quietly brilliant" screen (One time I let it for 2 hours, but no effect). Is this because I did not change the NAND partition? It's bigger than needed. In recovery I allways do factory reset and whipe Dalvik cache.

change your nand partition.because it is much more bigger than the rom wants and this may cause problem.

Changing the NAND partition was the solution. Why do they use such a small partition in NAND, and such a big one on SD. Is the remaining NAND still in use for something?

Could some one of you recommond a android rom with 2.3.x with htc sense
like an htc desire hd rom!

http://forum.xda-developers.com/showthread.php?t=1075703
http://forum.xda-developers.com/showthread.php?t=1185087

awesome, thanks buddy !

Hello fellaz !
Could you post like Marvlesz an tutorial for android roms with sense, I want to install ths rom so bad: http://forum.xda-developers.com/showthread.php?t=1185087
I did what the tutorial asked for but I got again an bootloop with the black htc logo -.-
-salam

1-have you wiped data/factory reset in ad recovery
2-do you have sd-ext partition in sd card
3-have you made 5-160-5 nand partition
4-have you downloaded the right file(mgldr-clk)

Can you explain this "2-do you have sd-ext partition in sd card" to me?
And yes, I downloaded the magldr version pal
- salam

Zakkusu said:
Can you explain this "2-do you have sd-ext partition in sd card" to me?
And yes, I downloaded the magldr version pal
- salam
Click to expand...
Click to collapse
the rom you have chosen doesnt boot without an sd-ext partition.this procedure will erase your sd.so make a backup to pc.this can be done at pc but i try to teach doing it at mgldr.in mgldr menu go to:ad recovery-advanced-partition sd card-2048m(since this rom is big i recommend this)-then 0 as swap(i use 128m to support ram but you shuld know that swap may harm your sd). now put your backup to sd:in mgldr ad recovery-mounts and storage-mount usb storage now your pc will see your sd.

Thanks a lot !
Could you be so kind and write the tutorial just like Marvlesz ?
(You can almost copy the biggest part from him)
It would help me a lot !
EDIT:
Here I go, I finally made it, to understand the how to's,
My Tutorial is for this ROM >>KLICK<< (Thanks Langthang)
(a big part is from Marvlesz, thanks Bro )
1-This tutorial assumes that you have HSPL already installed, your device is connected to your pc and you have the latest drivers, please carry on.
1a- Fully Charge your phone (use external charger, or manage yourself ! )
2-Go to ksubedi's Thread and download his HD2 NAND Toolkit (thanks ksubedi!)
3- After Installing it, Power Off your device (HD2) and power on into bootloader mode (Power on while Holding Volume down)
4- After seeing ("Serial" changed to "USB") on your phone, run the toolkit with Administrator rights (default).
5- From bottom right corner choose "Wipe (Task29)", go through the steps and when your device reboots go into bootloader again (Volume Down and Power On).
6- Choose from bottom right corner "Install MAGLDR", go through the process and when your phone restarts hold the power menu (not the volume !)
7- MAGLDR Screen will appear, Go down (using volume rockers) to Option 4. USB Flasher and wait for it to say "wait USB".
8- Download the Recovery Mode Link download newest Recovery 3.0.2.4: (thanks seadersn)
http://www.mediafire.com/?f81pamq6fbjmtw5
9- Extract the folder and open "flash" (open it with notepad)
10- Make this changes:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 160M
cache ya 5M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
(Its nearly the same text, only the numbers are different and if not you opened the wrong "flash.cfg".
11- Go now to your phone, in the mgldr menu and choose the USB-Flasher menu and wait (5 seks.)
12 - Open now with the admin rights "DAF" (RIGHT CLICK AND OPEN AS ADIMIN!! otherwise it will not work)
13- go now to Recovery Mode in your phone and open advanced
14- Choose Wipe Dalvik Cache
15- go to Paritition SD Card and Choose 2048MB and 0 MB (you can choose also 128MB to support your RAM but it can woope your sd cards ass up ! (thanks to mutil)
16- Go now back with the arrow button on the buttom of your phone and choose "install zip. from sdcard".
17- choose know "choose zip from sdcard)
18- choose know your zip. and wait for the construktions in the rom !
And start enjoying your ROM !
thanks to all for your teaching !
selam aleykum.
PS: Ramadan Kareem @all

[Q] Installing new ROM- NEED HELP

hey guys i dont wanna sound like a dumbass or anything
but ive been trying to install these two roms for a long tiime now and i just cant seem to get it done
if anyone would be kind enough to tell me like a step by step and what software i need to do it..IT WILL BE GREATLY APPRECIATED.
http://forum.xda-developers.com/showthread.php?t=1038694
http://forum.xda-developers.com/showthread.php?t=1112810
thanks alooooot guys and i appreciate it in advance.!

the first one is quite simple (i think you use winmo). download and unrar it.find the folder android and copy this folder to the root of your sd.then in phone explorer go to sd-find folder android-click clrcad then haret-you'll see something like 'starting linux'.it may take half an hour at the first loading.each time you reset you go to winmo,so in order to go to android you'll do clrcad-haret.
the second ron is a nand rom.for that you must wipe winmo.

i forgot winmo is windows mobile
im already on android running 2.3.3. with sense ..any way i can get these two roms to work through android?
please and thanks

please guys, if any of u could help ..im really tryina get at least one of these working. please and thanks

do you have mgldr in phone? i should also say that these roms aren't stable yet. their camcorder doesn't work properly and tyey have graphic glitches(whit horizontal stripes)

yeah thats what i read but i wanted to try either way
what could u suggest that has sense, and is something somewhat advance? 720p or 3d... and that new sense 3.0 lockscreen?
thanks mate!

http://forum.xda-developers.com/showthread.php?t=1075703
http://forum.xda-developers.com/showthread.php?t=1185087
i can say these two are the best as sense 3 roms.they record 720p but laggy and only can be watched by paid app vplayer.you can find necessary informations in their op. for sd rom you can use the one you mentioned in op.

im sorry to sound like an idiot again..
but how do i install these two? because im more familiar with the ZIP way ,where i just copy them to sd card..go to boot menu and load them
thank u again mate!

these are zip files. do you know how to make nand partition? if not download and install this tool. download the rom you choose and put to your sd. make an sd-ext partition of 1 gb in sd (if you don't have one).then ask again when you are ready.also say which rom you have chosen.
http://forum.xda-developers.com/showthread.php?t=1090783

I'm using the dungphp 2.0 ROM. Runs great except the camcorder lag. Scroll down just a bit on the page and they give you step-by-step directions.
http://forum.xda-developers.com/showthread.php?t=1075703&page=538

hoss93 said:
I'm using the dungphp 2.0 ROM. Runs great except the camcorder lag. Scroll down just a bit on the page and they give you step-by-step directions.
http://forum.xda-developers.com/showthread.php?t=1075703&page=538
Click to expand...
Click to collapse
do i download the MAGLDR version or the clk?

ehi , do you have mgldr or clk or none of them in your phone? restart your phone and hold down power key if you see mgldr menu then you have mgldr. if not then you have clk. control and inform.

mutil said:
ehi , do you have mgldr or clk or none of them in your phone? restart your phone and hold down power key if you see mgldr menu then you have mgldr. if not then you have clk. control and inform.
Click to expand...
Click to collapse
i got mgldr, i got it when i first flashed my phone from windows..
so is that mean i download the magldr version and just run it thru bootloader?

no in mgldr you dont use bootloader to flash rom.first download and install this tool to your pc http://forum.xda-developers.com/showthread.php?t=1090783
if you have an eu hd2 you should also have an sd-ext partition of at least 1 gb. meanwhile download mgldr version of the rom and be careful if it is eu or tmous.put it to your sd.when you complete these turn here again.

mutil said:
no in mgldr you dont use bootloader to flash rom.first download and install this tool to your pc http://forum.xda-developers.com/showthread.php?t=1090783
if you have an eu hd2 you should also have an sd-ext partition of at least 1 gb. meanwhile download mgldr version of the rom and be careful if it is eu or tmous.put it to your sd.when you complete these turn here again.
Click to expand...
Click to collapse
alright so i tried just loading it into bootloader, and it got stuck on the htc; quietly brilliant screen
now i got the hd2 toolkit.. what do u flash with it?

you can flash many things with it. now you'll make a nand partition. you didn't say but i think you have ah eu hd2 (512 mb). if not warn me. now connect your phone to pc. go to mgldr menu(i hope it still works) choose flasher.see usb flasher...usb.then in nand toolkit choose mgldr repartition-choose partition size 'custom'-choose cache size 5-at left bottom choose repartition.write 240 in the opening window.
after installation complete in mgldr menu choose ad recovery-install zip from sd-choose zip from sd-find your rom.zip. after installation is complete reboot.

nope i have a tmobile us hd2

i edited my former post according to tmous.follow and ask for help if you stuck.

this is what it says at the end in HD2 toolkit:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
and before that it said.. the program cant start because RAPI.dll is missing from ur computer. try reinstalling the program to fix this program.
help???

in mgldr menu(list with 12 choices) did you go to usb flasher choice

Pleas help me i'm gonig to get crazy !! :(

Hello to all.
I just buy my HD2 and try to get nand rom. It was all cool, until i flashed new rom 2.00.000.0 the loading was on 100% also ROMUpdateUtility said to me congratulation you have successfully flashed new rom.
But then my phone was stuck on splash screen it say's only HTC . I've read it, it must be radio, so i entered bootloader and flash newer radio. Also this was completed successfully, but then agin my phone is stuck on HTC logo
What to do?
Please help me I'm desperate ((

Bucika said:
Hello to all.
I just buy my HD2 and try to get nand rom. It was all cool, until i flashed new rom 2.00.000.0 the loading was on 100% also ROMUpdateUtility said to me congratulation you have successfully flashed new rom.
But then my phone was stuck on splash screen it say's only HTC . I've read it, it must be radio, so i entered bootloader and flash newer radio. Also this was completed successfully, but then agin my phone is stuck on HTC logo
What to do?
Please help me I'm desperate ((
Click to expand...
Click to collapse
Start a clean install:
http://forum.xda-developers.com/showthread.php?t=933951
Good luck

Tnx but when i'm trying to instal it it is stuck 0% f*** I'm such a noob
did i break my phone?

Bucika said:
Hello to all.
I just buy my HD2 and try to get nand rom. It was all cool, until i flashed new rom 2.00.000.0 the loading was on 100% also ROMUpdateUtility said to me congratulation you have successfully flashed new rom.
But then my phone was stuck on splash screen it say's only HTC . I've read it, it must be radio, so i entered bootloader and flash newer radio. Also this was completed successfully, but then agin my phone is stuck on HTC logo
What to do?
Please help me I'm desperate ((
Click to expand...
Click to collapse
"new rom 2.00.000.0" = This is task29 = it cleans your NAND by flashing (in it's basic terms) an empty ROM.
Simply flash the winmo ROM you wanted, and for the above post: it probably stuck because you don't (or seem not to) have HSPL .(but how did you manage to do task29 without HSPL?)
Install HSPL if you want to experience the real HD2 .
Have fun!

Thank you it worked!!! DDDDD
No i just have to figure out how to instal nand android on it and wp7 dual boot and I'm the happiest person alive

Okay, from your Personal Message, it seems you have SPL 3.03 .. You have to install HSPL first from here : http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Bucika said:
Thank you it worked!!! DDDDD
No i just have to figure out how to instal nand android on it and wp7 dual boot and I'm the happiest person alive
Click to expand...
Click to collapse
Click on this http://www.google.com and you shall be the happiest person alive !!!
Click to expand...
Click to collapse

Yea great ) now i have a nother problem when i flashed wm rom
i did try to instal hspl but it said i don't have instaled SPL 1.42.0000 what now?

Bucika said:
Yea great ) now i have a nother problem when i flashed wm rom
i did try to instal hspl but it said i don't have instaled SPL 1.42.0000 what now?
Click to expand...
Click to collapse
Try this one :http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
READ THIS IF YOU WANT YOUR DEVICE TO LIVE ::
Is your device tmobile or european? (are your buttons coloured or they are all white? or do you have "T-Mobile" on top of your device?)

Ok i will than every your post you are realy helping me so how do i continiue?
I want a HTC Desire HD port in My HD2 or Htc sensation port witch one is better?
So far i have instaled HSPL4 version 2.08 instaled how do i continue?

Its European version not T-mobile.

Bucika said:
Ok i will than every your post you are realy helping me so how do i continiue?
I want a HTC Desire HD port in My HD2 or Htc sensation port witch one is better?
So far i have instaled HSPL4 version 2.08 instaled how do i continue?
Click to expand...
Click to collapse
Okay, First of all, stop thanking each post of mine ,Although I really do appreciate them, please only thank me when you're fully satisfied . (you're limited to five thanks per day anyway )
To not take so many posts, I will update this post with the information as I gather them . And I recommend using a non-sense ROM like CM7. (CM7=CyanogenMod7)
I have a tut written somewhere, I will go grab it, wait for me
Here is the tutorial for Tyween's CyanogenMod7 ROM:
http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
Click to expand...
Click to collapse
DON'T FOLLOW THE TUTORIAL IF YOU WANT TO DUAL BOOT .. ONLY FOLLOW IF YOU WANT TO ONLY BOOT ANDROID
Click to expand...
Click to collapse
And if you're insisting on using a sense-based ROM (even though I highly don't recommend) here is another tut written by Zakkusu (Thanks!) for using a Sensation ROM (sense) :
http://forum.xda-developers.com/showpost.php?p=16703770&postcount=20
Click to expand...
Click to collapse
ONLY FOLLOW IF YOU WANT TO ONLY BOOT ANDROID !!
Click to expand...
Click to collapse
What CyanogenMod7 ROMS have over Sense Roms:
*ULTIMATE SMOOTHNESS AND RESPONSIVENESS !!
*Very Customizable.
*Always Running the latest build of gingerbread (2.3.5).
*Stable and no lags.
*Very Small in size (only needs 150mb of your nand, the rest is for your data )
*Faster boot.
What Sense Roms have over CyanogenMod7:
*Very Eyecandy.
*Lots of (Really nice and good) HTC widgets and apps.
*(Sorry, but that all what I could think of ) (or maybe that's actually what all they have? )
-------------------------------------------------------------------------------------------------------------------------------------------------------
Update 3:09 AM :
Sorry, I forgot you wanted to dual boot (Don't Follow my tut) !
Step 1 : follow this video : http://www.youtube.com/watch?v=Nac3Fnf-lY4
Step 2 : When you finish Step 1 . (tell me when you do, also edit your posts so that we don't flood the thread with unnecessary posts )
-------------------------------------------------------------------------------------------------------------------------------------------------------
Update 3:20 AM
Okay, first tell me what device you have? European or T-mobile? And can you please tell me exactly what is written on your bootloader (tri-colour) screen?
-------------------------------------------------------------------------------------------------------------------------------------------------------
Update 3:30 AM
From this information:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 8x05
MicroP(TOUCH) 8X50
You don't have HSPL installed because if it were installed it should've said :
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
------------- 0x00
Cotulla HSPL -- 0X30
I will look for a solution, wait for my update ...
-------------------------------------------------------------------------------------------------------------------------------------------------------
Update 3:34 AM
Okay, now you have a supported SPL(you have SPL 2.08.0000) to install HSPL from this link :
http://forum.xda-developers.com/showthread.php?t=611433
report back what happens...
-------------------------------------------------------------------------------------------------------------------------------------------------------
Update 3:54 AM
lol !! what is wrong with your device?
Anyway, I'll look for a solution and be right back ...
-------------------------------------------------------------------------------------------------------------------------------------------------------
Update 4:03 AM
Never mind what I said, use this one to install HSPL http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 .
-------------------------------------------------------------------------------------------------------------------------------------------------------
Update 4:18 AM
Bucika said:
The lowest i can go is 2.08 HSPL
Click to expand...
Click to collapse
You mean when using HSPL3 ? (will respond in this update)
NEW POST :
Finally .. Congratulations buddy !
As a reward, I'll leave this mess and continue on How-to dual boot in a new post

Haha ok, i would like to have sense rom yes because i couldn't have one on my sgs not fully working at least. Way aren't you recommending sense rom?
Ok but how do i continue from HSPL4 version 2.08 ?
And then i would appreciated some help with wp7 too )
So far thank you weary much

Ok CM7 it is , so i just fallow your tutorial? I will tell you when i'm done to instal wp7
Tnx
Ok So i do have a problem i trayed to instal cm7 and on the firs step task 29 it's stuck on zero x) wtf is wrong with my phone?
I don't have T-mobile sign on my phone.
On my screen is written
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 8x05
MicroP(TOUCH) 8X50
OK Will do
hahaha that's just unbelievable it say's i have to have 1.42.0000 instaled
My phone is one big pice of ***
Haha for some reason my device doesn't want to run nand and wp7 hehe, THANK YOU I RELAY APPRECIATE YOUR HELP!!

The lovest i can go is 2.08 HSPL
OK I DID INSTAL
PB81100 HX-BC
2.08.HSPL 8G XE
0X05
CotullaHSPL 0X50
YES HSPL3 AND HSPL4 BOTH

This post is under construction !
I will post the steps soon .. Wait !
It will be better if you wrote : Step 1 = Done .. Step 2= Done .. etc
Step 1: Fully Charge your phone !
Step 2: Turn on your phone in bootloader mode and connect to pc and wait for it to change from "Serial" to "USB" ..
Step 3: Download this and EXTRACT ALL OF ITS CONTENT to a new folder.
Step 4: lol, you knew it yourself .. Run RomUpdateUtility as admin and install.
Step 5: Reboot your phone while holding the power button .. and tell me what you see.
Step 6: Backup all your sd card because WP7 will format it, go to the WP7 Development and download the WP7 ROM you want (tell me when done )
Step 7: Follow exactly what is in this video (from the time I preset, don't start from beginning) : http://www.youtube.com/watch?v=JTHRAUHZHlo&t=2m4s
Step 8: Coontinue with PART 2 here : http://www.youtube.com/watch?v=xTMry4NEPTE
Step 9: Here is the link for references and required applications. : http://forum.xda-developers.com/showthread.php?t=944288
Step 10: When choosing your sd card Android build, make sure it's compatible with MAGLDR
*I recommend using THIS ONE, as for live services, all ROMs have it but you need an Activation Key from Microsoft
If you face any troubles do not hesitate to send a PM and I will come back to this thread and post help you solve your problem.
Sorry for making it too long

Haha you don't have such luck buddy my phone is fully charged all the time i was conected to my pc hehe
How nice from you
I did
done
"Now press on ROMUpdateUtility and instal it
Done
Step 4 is...?
I see, i See Wait Mag wait for it Magic
aMagldr v1.13
build feb. 1. 2011...
and bunch of stuff :
Boot wph
root sd
usb massStg
etc..
I don't relly know witch one is the best? if it's posible i would love to have the latest and the one with working live service or what is called
AND pleas with HD camera

Haha np i will thank you

Bucika said:
Haha np i will thank you
Click to expand...
Click to collapse
Here are some tips you might need:
*Never boot WP7 withou sd card in.
*All ROMs have HD cam, Live Services (must have code).
** Some threads that might help you get a code :
***http://forum.xda-developers.com/showthread.php?t=921309
***http://forum.xda-developers.com/showthread.php?t=928366
***http://forum.xda-developers.com/showthread.php?t=960849
*** (P.S. : Use skype to call them for free )
*Mango will be released soon (hope so) so make sure to get it .
*Make sure the Android build is compatible with MAGLDR (the thread will probably have the tag: [MAG] or [MAGLDR].
**Pick your sd ROM from here :http://forum.xda-developers.com/forumdisplay.php?f=735
*It's easy to switch ROM's when using sd build, so you can try Sense and if you don't like it just switch over .
*Make sure the path is set in MAGLDR (you won't notice this if everything done correctly, However, sometimes it needs to be set manually, PM me if needed)
*NAND rom's cannot be booted from sd (duh)
Have fun

Yea great but i can't or i don't know wath the dude on the clip is doing when he's taking his sd card out ?
And can i do that without sd card reader with just my sd card in another phone?

Sent you a pm.
Instructions will be posted tomorrow
You need an sdcard reader, there are no other methods (that I know of) to partition your sd cards !
THIRD METHOD - USING A SINGLE SD CARD - HERE IS ANOTHER ALTERNATE METHOD PROPOSED BY XDA MEMBER HYELLOW (UPDATED)
1. Put your sd card inside the hd2 and power on.
2. Go to about screen, in settings, and reset your device. Let it reset and boot to WP7 again. While booting to WP7, it'll create the partitions it needs, so this is important. After you have gone through the setup wizard, go to about screen and reset your device again.
3. When it has booted into magldr screen, remove the sd card and insert into pc. (make sure that magldr is shown and stays there at bootup, otherwise it'll boot straight into wp7 without sd card and that is not what we want.
4. You'll see two partitions. A whopping 200mb of fat16 partition and the other is unformatted. Now right click on the unformatted partition and click delete. After that, click apply. Now you have unallocated space. Right click on the unallocated space and select create. Set parameters to logical and unformatted and size the partition. This will be your WP7 partition, so decide how much you want to allocate to it, this is permanent, no changes afterwards can be made. Also, make sure you move it to the end of the sd card in the same 'create' window. Hit apply. IMPORTANT When using this method make sure that the wp7 "unformatted partition" is larger than the Android partition otherwise the wp7 "unformatted partition" will move in 2nd place and you will not be able to resize the fat 16 / android partition.
5. Sit back and take a break.
break.
6. You now have a green fat16 partition to the left, some unallocated grey portion in the middle and your WP7 partition in modern turqoise colour on the far right. Agreed? Now remove the sd card from PC and insert in HD2.
7. After you have inserted the sd card, let it boot into WP7. Remember what your last action was when you were still in WP7? Yes, you pressed reset, so the device actually thinks he is still resetting the device. He might do it too, but just go through the setup wizard again.
8. Go to about screen and verify your storage. Don't look strange if when the storage has a different of about 1Gb, this is swallowed by WP7 for system stuff etc. Are you happy with the progress so far? Then power down your device and remove the sd card. Allow the HD2 to fully powered down as sometimes the screen is pitch black, but the device is still turning off.
9. Insert the sd card in pc and, using EASUS right click on the green fat 16 partition and select resize/move. Now fill up the rest of the unallocated space and hit apply. This is your android partition.
10. Format the sd android partition (not the whole sd card!) using EASUS to FAT32 using 32 or 64 kb cluster size and put an android build onto it and test.
11. IMPORTANT You need to convert the wp7 unformatted partition to primary for the sd android to see the sd card Use minitool partition wizard to do this. Right click on your WP7 unformatted partition and select modify and then click on set as primary and hit apply. Here is the link for minitool: http://forum.xda-developers.com/show...&postcount=372
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA Premium App

[Q] problem while loading android

got nearly every thing done with my HD2 EU device
installed stock rom 6.5
HSPL 2.08
Radio_Leo_2.15.50.14
Magldr 1.13
then USB flasher
instillation done for any rom
then device restart i choose Boot AD NAND
then i get
Android load at 11800000
from NAND
yaffs2 part is /system
Load zImage
Load initrd.gz
[K]11808000:224ac0 12200000:281E6C
Load done!
123456
Go Go Go!
another thing to mention
tried to install WP7 using the same way
loaded successfully to the welcome screen
then when i touch screen to go on
it doesn't recognize that i did touched the screen
when i press the hard keys like volume or power
it's working

Ridil said:
got nearly every thing done with my HD2 EU device
installed stock rom 6.5
HSPL 2.08
Radio_Leo_2.15.50.14
Magldr 1.13
then USB flasher
instillation done for any rom
then device restart i choose Boot AD NAND
Click to expand...
Click to collapse
After flashing ROM with USB flasher, just reboot your phone without enter the magldr menu. just reboot and dont press any key.
Android should boot automatically.
Did you try this?

Ridil said:
got nearly every thing done with my HD2 EU device
installed stock rom 6.5
HSPL 2.08
Radio_Leo_2.15.50.14
Magldr 1.13
then USB flasher
instillation done for any rom
then device restart i choose Boot AD NAND
then i get
Android load at 11800000
from NAND
yaffs2 part is /system
Load zImage
Load initrd.gz
[K]11808000:224ac0 12200000:281E6C
Load done!
123456
Go Go Go!
another thing to mention
tried to install WP7 using the same way
loaded successfully to the welcome screen
then when i touch screen to go on
it doesn't recognize that i did touched the screen
when i press the hard keys like volume or power
it's working
Click to expand...
Click to collapse
By the way, flashing the DFT Stock ROM via USB flasher is outdated, DAF.exe is no longer used to flash ROMs, CWM is. I would recommend looking into using that as well.

Nigeldg said:
By the way, flashing the DFT Stock ROM via USB flasher is outdated, DAF.exe is no longer used to flash ROMs, CWM is. I would recommend looking into using that as well.
Click to expand...
Click to collapse
that is the other problem ,, till installing magldr every thing is okey
after that i try to install recovery or what ever i install it's always fail to run it
after recovery it also stops at Go Go Go

Ridil said:
that is the other problem ,, till installing magldr every thing is okey
after that i try to install recovery or what ever i install it's always fail to run it
after recovery it also stops at Go Go Go
Click to expand...
Click to collapse
try flashing recovery 5.0.2.6 or download HD2 TOOLKIT,best program out there,everything u need all on page,so easy to use

i did used HD2 toolkit
and installed CLK
then recovery from HD2 toolkit
and that error what i got
flash_read_image : failed (511 errors )
Error : cannot read recovery header
at the last line
cmdline : no console suspend = 1 wire.search_count=5 clk=1.4.0.1

i have the same problem ...
-> Android load at 11800000
from NAND
yaffs2 part is /system
Load zImage
Load initrd.gz
[K]11808000:224ac0 12200000:281E6C
Load done!
123456
Go Go Go!
another thing to mention
tried to install WP7 using the same way
loaded successfully to the welcome screen
then when i touch screen to go on
it doesn't recognize that i did touched the screen
when i press the hard keys like volume or power
it's working
i installed other android rom tried other partitions like 150/ 200/ 250 and tried various rom, still stuck at 123456, gogogo, tried to boot up from sd card, but i dunno what are the files that are supposed to be on the sd card, so its still stuck at 123456, gogogo too
so what can i do now ..

mail2richard said:
i have the same problem ...
-> Android load at 11800000
from NAND
yaffs2 part is /system
Load zImage
Load initrd.gz
[K]11808000:224ac0 12200000:281E6C
Load done!
123456
Go Go Go!
another thing to mention
tried to install WP7 using the same way
loaded successfully to the welcome screen
then when i touch screen to go on
it doesn't recognize that i did touched the screen
when i press the hard keys like volume or power
it's working
i installed other android rom tried other partitions like 150/ 200/ 250 and tried various rom, still stuck at 123456, gogogo, tried to boot up from sd card, but i dunno what are the files that are supposed to be on the sd card, so its still stuck at 123456, gogogo too
so what can i do now ..
Click to expand...
Click to collapse
format ur sd card and put the rom bk on ur sd card then try again,normally does the trick

what are the files on the SD card?
most of the time after i downloaded a zipped rom .. i have no idea what other files is needed.. also my clockworkmod dun appear to be working well even after a few installation (can i have a link) and i can only install using DAF.exe ... any DAF andriod rom 2.3 and up to recommend ? Thanks

mail2richard said:
what are the files on the SD card?
most of the time after i downloaded a zipped rom .. i have no idea what other files is needed.. also my clockworkmod dun appear to be working well even after a few installation (can i have a link) and i can only install using DAF.exe ... any DAF andriod rom 2.3 and up to recommend ? Thanks
Click to expand...
Click to collapse
running from daf is no more lol,are u using clkwork or magldr,either way the rom has to be on ur sd card in zip format obviously lol and thats it,but when u download a rom make sure u download the right 1,it shud say if its for clkwrk or magldr,also im using recovery 5.0.2.6,also does the rom u download require sd-ext(partitioning ur sd card) as for rom choice,i'd go for TBD ROM v.2.3,FU#KING SUPERB ROM,i've had it for a few days now,flashed the red theme,not been this happy with my fone for along time,i won't be flashing anything else for along time lol

Ridil said:
i did used HD2 toolkit
and installed CLK
then recovery from HD2 toolkit
and that error what i got
flash_read_image : failed (511 errors )
Error : cannot read recovery header
at the last line
cmdline : no console suspend = 1 wire.search_count=5 clk=1.4.0.1
Click to expand...
Click to collapse
i have the same issue.. any solutions ?

Same here... any solutions???

same here... what is the problem actualy?

i have the same problem~
>.<~~~
i think it is a hardware problem coz i open my hd2 in order to change the screen then start this problem.
but i dont understand why i can use and flash to WM 6.5 it's no problem.....
only Android...........
i help my Family (5 HD2)flash HD2 to Android many many times.~
i dont think is operating problem.......
i hv try MTTY but no use.
The following is a reference, we can c "task 29" is Abnormal.
You can also upload to share~
Cmd>set 14
crc=0xD2C8DA7F.
HTCST 硜浶TCE
Cmd>task 28
Format start
Fill RSVD information for block 497 to 530
Storage start sector=0x0, total sector=0x0
Storage start block=33, total block=0
Bypass ExtROM Block (160+10)
Total Bad Block in CE: 0
Erase physical block from 532 to 344
ExtROM: Erase physical block from 3910 to 4080
si backup: Erase physical block from 4080 to 4096
Format end
Cmd>task 29
Format BINFS start
Fill RSVD information for block 497 to 530
CE start start block=530, total block=3566
erase_page - error bad status: 0xB791EA20
ERASE block 3227 FAIL !!!
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format BINFS end
Cmd>task 2a
Format ALL start
backup SPL OK
backup MISC configuration OK
SPL start start block=497, total block of CE=3599
erase_page - error bad status: 0xB791EA20
ERASE block 3227 FAIL !!!
Write 0xFF start page=0x7C40, total page=0x383C0
restore SPL OK
restore MISC configuratoin OK
restore MFG configuratoin OK
Format ALL end
Cmd>
Click to expand...
Click to collapse

[Q] Magldr isnt booting.

Hi,
I'm a little frustrated right now!
I want to install this ROM:
NexusHD2-JellyBean-4.1.2-CM10 V1.2
First problem:
I wasnt able to flash because my accept-softkey was broken.
New MMI-Board - check!
Now:
I had this ROM on my device again:
RUU_Leo_S_Vodafone_DE_3.14.162.5_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
(Installed via SD-Card)
--
SPL 3.03 --> SPL 3.03 HSPL - check!
Radio Rom --> Radio_2.15.50.14 - check!
Task 29 - check!
Want to install Magldr --> installed / reboot but stuck at the HTC screen
So - what did I wron till now?!
Or is there anything I could do?!
The 3-colours-screen says:
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
Cortulla HSPL 0x50
On the SD Card are:
1. LEOIMG.nbh (The Vodafone ROM)
2. NexusHD2-JellyBean-CM10_V1.2.zip
Thx in advance

try flash hspl2.08 and then flash magldr .I have forgotten if you need to set maldr space for install the rom.If it need keep follow the instructions on tytung's suggestion.And I think you have to give it 350mb space.
Sent from my HTC HD2 using xda app-developers app

Shefe91 said:
Hi,
I'm a little frustrated right now!
I want to install this ROM:
NexusHD2-JellyBean-4.1.2-CM10 V1.2
First problem:
I wasnt able to flash because my accept-softkey was broken.
New MMI-Board - check!
Now:
I had this ROM on my device again:
RUU_Leo_S_Vodafone_DE_3.14.162.5_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
(Installed via SD-Card)
--
SPL 3.03 --> SPL 3.03 HSPL - check!
Radio Rom --> Radio_2.15.50.14 - check!
Task 29 - check!
Want to install Magldr --> installed / reboot but stuck at the HTC screen
So - what did I wron till now?!
Or is there anything I could do?!
The 3-colours-screen says:
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
Cortulla HSPL 0x50
On the SD Card are:
1. LEOIMG.nbh (The Vodafone ROM)
2. NexusHD2-JellyBean-CM10_V1.2.zip
Thx in advance
Click to expand...
Click to collapse
Disclaimer: I am a cLK user so the information I provide may not be totally accurate or up to date.
Now that's out the way I believe your issue is HSPL 3.0.3. The OP of Magldr states you need HSPL 2.0.8. This is also stated in the HSPL Reference Thread. However I am aware that both threads are rather old, but I would try downgrading your HSPL to 2.0.8 and reinstalling magldr.

That was the reason!
Thank you guys
But what is 3.03.HSPL good for?!

needed for running 3.14 winmo roms on a regular hd2 (because 3.14 roms are very unstable if the spl ISNT 3.03 whn on regular hd2)

samsamuel said:
needed for running 3.14 winmo roms on a regular hd2 (because 3.14 roms are very unstable if the spl ISNT 3.03 whn on regular hd2)
Click to expand...
Click to collapse
Thank you!
It seems you know a lot about that topic - so may you can answer this question, too (everyone else can add a answer as well) - I would like how to set the values from this table:
misc ya 1M
recovery rrecov|ro|nospr 7M recovery_leo.img
boot yboot|ro 5M
system ya 220M
cache ya 2M
userdata ya|asize|hr allsize
(I am using magldr - and want to use the ROM (mentioned in the first post) as nativeSD
Where can I set this values?
I didnt found really helpful answers up to know

Shefe91 said:
Thank you!
It seems you know a lot about that topic - so may you can answer this question, too (everyone else can add a answer as well) - I would like how to set the values from this table:
misc ya 1M
recovery rrecov|ro|nospr 7M recovery_leo.img
boot yboot|ro 5M
system ya 220M
cache ya 2M
userdata ya|asize|hr allsize
(I am using magldr - and want to use the ROM (mentioned in the first post) as nativeSD
Where can I set this values?
I didnt found really helpful answers up to know
Click to expand...
Click to collapse
The easiest way is to download the HD2 NAND Toolkit, with which repartitioning is fairly self-explanatory. There are also guides in the OP of the link so I doubt you'll have any trouble using it.
Alternatively, you can do the following:
1. Download CWM from the original thread or from the NAND flashing guide in my sig
2. Open the CWM folder then find the file 'flash.cfg' (not flash.cfg.txt)
3. Open flash.cfg with Notepad
4. Edit it to be the same as you posted and save it
5. Boot into MAGLDR and go to USB flasher
6. Connect your phone to your PC and run the CWM installer.
In your post, it also says that you want to run the ROM as NativeSD. I don't know anything about NativeSD, but I thought that since it runs from the SD card it shouldn't require CWM partitoning? I think you're getting confused here between the instructions to flash NAND Android and the instructions for NativeSD. If someone knows otherwise, then please correct me since I don't want to be spreading incorrect info.

Thank you for the answer - i thought it might be possible to adjust the values anywhere in magldr - because with the NAND-Tool its just possible to take more or less values in 50's steps
Then the next thing with the adjustment with the flash.cfg was the \RSPL\RSPL.cpp (723) but I just had to get rid of a tick in activesync.
Lets see if its now working correctly -last time I installed Jelly Bean everytime i downloades something from the market it just rebootet ...
€: Its working (yay) - but I would still like to know the things

Shefe91 said:
Thank you for the answer - i thought it might be possible to adjust the values anywhere in magldr - because with the NAND-Tool its just possible to take more or less values in 50's steps
Click to expand...
Click to collapse
choose custom
Then the next thing with the adjustment with the flash.cfg was the \RSPL\RSPL.cpp (723) but I just had to get rid of a tick in activesync.
Lets see if its now working correctly -last time I installed Jelly Bean everytime i downloades something from the market it just rebootet ...
€: Its working (yay) - but I would still like to know the things
Click to expand...
Click to collapse

Shefe91 said:
Thank you!
It seems you know a lot about that topic - so may you can answer this question, too (everyone else can add a answer as well) - I would like how to set the values from this table:
misc ya 1M
recovery rrecov|ro|nospr 7M recovery_leo.img
boot yboot|ro 5M
system ya 220M
cache ya 2M
userdata ya|asize|hr allsize
(I am using magldr - and want to use the ROM (mentioned in the first post) as nativeSD
Where can I set this values?
I didnt found really helpful answers up to know
Click to expand...
Click to collapse
I don't think that you have enough space.I have tried 220.I start the system difficultly.And after start the system,the dev is laggy sometimes.And you can't restart it again.

wxl104 said:
I don't think that you have enough space.I have tried 220.I start the system difficultly.And after start the system,the dev is laggy sometimes.And you can't restart it again.
Click to expand...
Click to collapse
Yeah - you need 300. Then everything is fine - that was my problem first, too!
Everytime I downloaded something from the Playstore - reboot! now everything is cool
Thank you for the answer - i thought it might be possible to adjust the values anywhere in magldr - because with the NAND-Tool its just possible to take more or less values in 50's steps
choose custom
Click to expand...
Click to collapse
Yeah and when I choose this where do I set the values then?
& Is there really no option via magldr?
Btw. everything is fine right now - but I want still to know that stuff

You can't change the partition sizes from within MAGLDR, unfortunately. It's not so bad for someone like me who doesn't really flash ROMs too much, but for self-professed 'flashaholics' it's pretty annoying. If you really desperately need that function for whatever reason, you can flash cLK 1.5

Choose custom, and after you hit re partition a popup asks you what size. (does no one ever just try anything and see what happens nowadays;? ? )

Nigeldg said:
You can't change the partition sizes from within MAGLDR, unfortunately. It's not so bad for someone like me who doesn't really flash ROMs too much, but for self-professed 'flashaholics' it's pretty annoying. If you really desperately need that function for whatever reason, you can flash cLK 1.5
Click to expand...
Click to collapse
Thank you for that information but cLK and native-sd seems not to work so easily like magldr for me
& I do not change the ROMs that often that it would be annoying but it would have been pretty nice.
samsamuel said:
Choose custom, and after you hit re partition a popup asks you what size. (does no one ever just try anything and see what happens nowadays;? ? )
Click to expand...
Click to collapse
Ah, okay.
'nd no ... im not flashing that often and I dont want to do soemething really stupid :angel: