Database Users

Question - Uninstall hardspl

I have an HD2 and it had a custom rom and hardspl.
something is wrong with it so i need to send it back to the store.
i just flashed back to a shipped (dutch) rom i found in on xda.
but i think i'm doing something wrong with the hardspl.
i unpacked the shipped rom,
took out the RUU_signed.nbh and renamed it to leoimg.nbh.
Placed it on the SD card (root)
hold volume down and boot the phone.
i go into the red green blue screen.
then it says loading for 2 seconds.
and then i go back to the red green blue screen and nothing happends..
what i see is:
pb81100 hx-bc
spl-2.08.hspl 8g xe
cotullahspl
i assume this isnt the original spl?
what am i doing wrong?

anyone???????????

Have you tried installed HSPL3 and selecting the SPL (non HSPL) version that was the same as the shipped one.

First you need to format the SD card to fat32? It is done? ... read and follow all instrutions. There's same ambiguous information in this forum, not your fault.
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
in hXXp://forum.xda-developers.com/showthread.php?t=609477

Some how i finally managed to do it.
i used the combination of both your sugestions.
formatted the sd card and placed the file on it..
then i synced it with my pc and opened the hspl3.exe thing...
and then it went for it!
thank you both for your help!

[Q] HT2 Reformatting help Plz?!

Hello, First off I am quite new to XDA and i have used the search and google search with xda at the end to find this answer. I Currently run Typhoon Cynogen 2.5.3 And it ran stable.... Now the Touch Screen is completely unreponsive. I need to send it back to htc to get a replacement and i run Android on internal memory, i already tried to reflash to see if the touch works or now. Since i am still under warranty i need to find if anyone can please help....A Stock (T-Mobile) Win Mobile 6.5 rom that i can install and remove my Nand and everything that has to do with Android so it doesnt show that i voided my warranty....Please let me know...i am indeed still new at this! If possible include instructions on how to... Also it has clock work mod recovery in the hd2 that i can access with the buttons.

Tuskedwolf said:
Hello, First off I am quite new to XDA and i have used the search and google search with xda at the end to find this answer. I Currently run Typhoon Cynogen 2.5.3 And it ran stable.... Now the Touch Screen is completely unreponsive. I need to send it back to htc to get a replacement and i run Android on internal memory, i already tried to reflash to see if the touch works or now. Since i am still under warranty i need to find if anyone can please help....A Stock (T-Mobile) Win Mobile 6.5 rom that i can install and remove my Nand and everything that has to do with Android so it doesnt show that i voided my warranty....Please let me know...i am indeed still new at this! If possible include instructions on how to... Also it has clock work mod recovery in the hd2 that i can access with the buttons.
Click to expand...
Click to collapse
This has been discussed MANY times so have no idea how you couldn't find info via search.
All you need to do is..
a) Power off phone
b) Hold Volume down button
c) Press (do not hold) power button
d) Once Tri color boot screen is up, plug in USB cable.
e) Flash stock ROM from HTC site.
DONE!

I am sorry.... But Thx i Just did that and Its back to Win Mob !

Tuskedwolf said:
I am sorry.... But Thx i Just did that and Its back to Win Mob !
Click to expand...
Click to collapse
Make sure you use HSPL 4 to revert your HSPL back to 3.03.0000 SPL before sending it back in. If yocflash the most recent T-Mobile update ROM the 3.14 ROM you need to reflash it via SD card as it has SPL 3.10.0000 and HSPL 4 does not have that SPL version in it. Bit flashing via SD card will give you this SPL version if you flash the ROM I am speaking of.
To flash via SD card right click on the ROM and select rename and rename it to a .zip file and hit enter. Then right click the file again and select view, find the RUU_signed.nbh file and copy it to the root of your SD card. Don't forget to go back and rename the original file .exe again so you can use it later if you need it again. After you have copied the RUU_signed.nbh to your SD card use your File Explorer to find the file and rename it to LEOIMG.nbh. Next turn your HD2 off and hold the volume down button down while you power your HD2 back on and as soon as you see bootloader and searching on the screen let the volume down button go and follow the on screen instructions.
This will have you 100% good to go for a warranty exchange or repair.

Hmm, So you want me to take the stock Ruu File that i downloaded from t-mobile and rename that to leo.img....the HSPL on there is currently it shows -2.08.HSPL
in the triloader screen? I am still confused on what to do exactly... i already reformatted the phone with the stock Ruu. And thats what the HSPL is that shows on the Tri Color boot screen of the phone.

Tuskedwolf said:
Hmm, So you want me to take the stock Ruu File that i downloaded from t-mobile and rename that to leo.img....the HSPL on there is currently it shows -2.08.HSPL
in the triloader screen? I am still confused on what to do exactly... i already reformatted the phone with the stock Ruu. And thats what the HSPL is that shows on the Tri Color boot screen of the phone.
Click to expand...
Click to collapse
Yes you need to revert the HSPL back to SPL. HSPL is a custom SPL and you do not want this on your HD2xif youcare sending it in for warranty replacement or warranty repair. The twocways of reverting it is to flash the official ROM via SD card or use the HSPL 4 utility to revert it cause you can flash SPL as well as HSPL with it. But I recommend you use the SD card flash as the SPL with the current T-Mobile upgrade ROM is 3.10.0000 and HSPL 4 does not have this SPL.cGocto the below link if you are still confused about flashing via SD card, it will explain all.
http://forum.xda-developers.com/showthread.php?t=681317

Ok this is what it shows exactly on the tri color screen !
PB81120 SS-B3
SPL -2.08.HSPL 8G XE

Tuskedwolf said:
Ok this is what it shows exactly on the tri color screen !
PB81120 SS-B3
SPL -2.08.HSPL 8G XE
Click to expand...
Click to collapse
You do not want it to say that you want it to say.
PB81120 SS-B3
SPL -2.10.0000 8G XE
OR
SPL -3.03.0000 8G XE
Sorry my memory failed me it is 2.10.000 not 3.10.0000, so you want it tocsay onecof the to I listed

make its the .nbh file that your renaming to LEOIMG.nbh ... dont just simply rename the .exe file

Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5

Tuskedwolf said:
Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5
Click to expand...
Click to collapse
You havecto rename the file you downloaded. from .exe to .zip and then you can explore the file to find the RUU_signed.nbh file.

Tuskedwolf said:
Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5
Click to expand...
Click to collapse
the exe file is just an archieve that with in that is the .nbh file.along with the radio and the update software.. you just need to extract it using winrar or prob changing the extension from .exe to .zip... once extracted the file.with the .nbh extention is the rom.. the bootloader will only recognize .nbh... so just change the .nbh file name to leoimg and move it to the root of the sdcard and once in bootloader mode it will detect the file and flash it and remove the hspl

Ok, So i put the leoimg.nbh in the sd card booted to the Tri loader and its just stuck on that screen... its not currently connected to the computer... it says serial on the white part of the screen... How do we get it going... or start the process?

You guys said it should search after letting go of the vol down button but its not moving from the screen and theres a 1gb sd card.

Tuskedwolf said:
Ok, So i put the leoimg.nbh in the sd card booted to the Tri loader and its just stuck on that screen... its not currently connected to the computer... it says serial on the white part of the screen... How do we get it going... or start the process?
Click to expand...
Click to collapse
? make sure the .nbh file you renamed was the rom (largest one) and that you didnt just rename it to leoimg.nbh.nbh because thats a common mistake and try naming it LEOIMG capital letter... but thw bootloader should load up the file without any input from you

Also make sure it is on the root of your SD card.

How do we get it on the root... i just copied and pasted it to the micro sd card... and its all in caps! Also it doesnt just start up

Tuskedwolf said:
How do we get it on the root... i just copied and pasted it to the micro sd card... and its all in caps! Also it doesnt just start up
Click to expand...
Click to collapse
Yhe root of your SD card means it iscjust on the SD card and not in a file. So when you view your SD card you should be able to see it with out having to open a file.

oK, So, i renamed that RUu file which i made a mistake in putting it in .zip and re extracting it because i had found another Leoimg.nbh file that i tried using so, I reformatted the sd card to fat32 and but the one i found of the Ruu file.... and renamed it the "LEOIMG.nbh" and re did it... And now it picked it up its installing Radio V2 Rcust bootloader splash 1 os config data...so we shall see what happens...!

Ok, it said Update Success... Does that mean i am done after that or do i have to do anything else?!

Get to stock version

Iam EU version hd2...I want to go back to stock version win6.5
Iam having magldr,android energy rom....Iam passing my mobile so I want hd2 as it was when taken out from box....plz give me steps...
Thanks
Sent from my HTC Wildfire using XDA App

Google Dude
see if this works
theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/

No luck...
Sent from my HTC Wildfire using XDA App

Find a WinMo Rom here http://forum.xda-developers.com/showthread.php?t=623283
Always make a backup.
1. Change .exe from rom download to .zip
2. Find file name RUU_Signed.nbh (or something like that. should be like ~270MB in size) and change name to LEOIMG.nbh
3. Put on a 4GB or less microSD card with a FAT32 format
4. insert sd into phone
5. go into bootloader by booting phone holding power and vol. down button
6. the flash should start automatically and should install stock rom/spl/radio

jdcream123 said:
Find a WinMo Rom here http://forum.xda-developers.com/showthread.php?t=623283
Always make a backup.
1. Change .exe from rom download to .zip
2. Find file name RUU_Signed.nbh (or something like that. should be like ~270MB in size) and change name to LEOIMG.nbh
3. Put on a 4GB or less microSD card with a FAT32 format
4. insert sd into phone
5. go into bootloader by booting phone holding power and vol. down button
6. the flash should start automatically and should install stock rom/spl/radio
Click to expand...
Click to collapse
Ok, tried this,
the phone is starting up in bootloader
just stays at the red green blue white screen,
pb81100 hx-bc
spl-2.08 hspl 8G XE
0x05
Cotulla SPL
0x48
is it working? i can't see that it is,
should i reboot?

after working sevral days i need help

hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
edit:i tried to restore and it says md5 mismatch
thanx

If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.

Khan_ said:
hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
Click to expand...
Click to collapse
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...
Click to expand...
Click to collapse
its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.
i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo
Click to expand...
Click to collapse
which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshooting
went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
Click to expand...
Click to collapse
stuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
edit:i tried to restore and it says md5 mismatch
Click to expand...
Click to collapse
theres a few threads about fixing md5 sums, read them yet?
thanx
Click to expand...
Click to collapse
i would suspect a dodgy sd card, but thats only a first general guess based on little information.

icke said:
If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.
Click to expand...
Click to collapse
did that no luck
samsamuel said:
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshootingstuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
theres a few threads about fixing md5 sums, read them yet?
i would suspect a dodgy sd card, but thats only a first general guess based on little information.
Click to expand...
Click to collapse
ya as i said i did alot of search with no luck .
so finally i just installed
Code:
XXX.jayceooi.com/2011/01/14/how-to-install-windows-phone-7-on-htc-hd2-video/
but srsly i dont like but atleast it ws very simple to install,is there any way to install nand android just like this cuz i didnt find any
again thanx for replies guys

let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully

I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium

It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun

gdsbalaji said:
let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully
Click to expand...
Click to collapse
i really appreciate that bro ...yeah i really want android back on my hd2
kylew1212 said:
I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
i ll look into it definitely.
Taco123 said:
It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun
Click to expand...
Click to collapse
HSPL version is 2.08 i dont know about that radio version but i tried installing radio from provided in "easyandroid by kevin" and it also got stuck on 0%.did task 29 installed magdlr 1.13 and CWR 3.2.0.0 (also tried the latest version of CWR 5.0.2.8 i think) formated sd card did a partition as well mounted usb storage from ad recovery rebooted it the again went to ad recovery and pressed choose from sd card it goves me that error "installation aborted.
just a quick question i have these roms on my computer
http://forum.xda-developers.com/showthread.php?t=905060
http://forum.xda-developers.com/showthread.php?t=1013852
what should be the neccesary steps to install these i read the both developers guides but there is something that i am missing...
i hv DFT windows 7 installed on my hd2 so what should i do to get android back.
what is Clk i did not installed that in my view was clk is same thing like magdlr so i skipped installing that n i had (hspl 2.08,magdlr 1.13 and cwr 3.2.0.0) only
is this the problem causing?
regards

here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg

gdsbalaji said:
here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
Click to expand...
Click to collapse
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files again(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.

Khan_ said:
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.
Click to expand...
Click to collapse
good luck.

gdsbalaji said:
good luck.
Click to expand...
Click to collapse
everything worked smooth untill the final test
i mounted usb storage copied HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR clicked power button selected install zip from sd card then selected choose zip from sd card selected HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR and selected Yes .
it says
installing :/sdcard/HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
Finding update package
Opening Update Package
E:cant open /sdcard.HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
(bad)
installation aborted
same old issue what i was getting.
edit:it was the sd card ...i changed the sd card copied rom and installed it smoothly thanks a ton bud i really appreciate the help u gave .God bless ya

Glad it worked dude...hv fun
Sent from my HTC HD2 using XDA App

[Q] Connect HD2 in bootloader to linux PC

Hello,
I am trying to get back from WP7 to Windows Mobile on my HD2 (European version) but my Ubuntu 14.04 PC doesn't see the phone bootlader mode.
Bootlader shows:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
USB
My SD card on which I kept Windows Phone 7 is probably broken because it is not readable even though I connect it through adapter and not through the phone so I can only use USB to install the old system.
On HD2 I can boot Windows Phone but only to make an emergency call and not further.
Do I need to install some drivers on my PC? Are there any for linux?
Thanks in advance for help.

philossus said:
Hello,
I am trying to get back from WP7 to Windows Mobile on my HD2 (European version) but my Ubuntu 14.04 PC doesn't see the phone bootlader mode.
Bootlader shows:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
USB
My SD card on which I kept Windows Phone 7 is probably broken because it is not readable even though I connect it through adapter and not through the phone so I can only use USB to install the old system.
On HD2 I can boot Windows Phone but only to make an emergency call and not further.
Do I need to install some drivers on my PC? Are there any for linux?
Thanks in advance for help.
Click to expand...
Click to collapse
you should be able to flash wm6.5 from your sdcard.
look in your downloaded extracted wm6.5 folder for a file called RUU_signed.nbh, and rename it leoimg.nbh and put it on the root of your sdcard.
Go to bootloader screen and it should flash it.
Be sure to use the correct wm6.5 rom for your phone, tmous phones can be bricked if wrong rom flashed.
See http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/#more-7398 if unclear
good luck, and welcome to the forum
Edit; Sorry, just re-read your post and sdcard is duff, try https://www.winehq.org/
Edit2; which wp7 rom was it? If it was an early rom, it might be storagelocked, and inaccessible. All of the latest wp7 roms do not lock your sdcard so that you can still access the 200mb fat32 partition, you can resize it to the full extent of the sdcard using gparted, and re-format it. Then flash from sdcard as above.
Else unlock sdcard with an old nokia phone, or buy/borrow an sdcard

Firstly, thank you for fast response.
I used other SD Card and did it the way with leoimg and at first it stopped when I tried installing 3.14, but 1.6 did install! Everything works fine.
Thanks again for help.

I have one more question.
I need to change language to Polish and I tried a few things:
I have installed WWE_East_Europe 3.14 but even though I change regional settings to Polish, language does not change.
I tried to install InterWrite's Extension extpkg.exe through Wine but it gives an error 'files have changed'.
I have also tried to change the name of extpkg to leimg.nbh and istall it through SD Card but, as I expected, it did not work.
Is there a possibility to change language to Polish in any other way?

There's no possibility to change language in Windows Mobile, unfortunately. You need to look for a ROM from Polish operators.