I have an HD2 and it had a custom rom and hardspl.
something is wrong with it so i need to send it back to the store.
i just flashed back to a shipped (dutch) rom i found in on xda.
but i think i'm doing something wrong with the hardspl.
i unpacked the shipped rom,
took out the RUU_signed.nbh and renamed it to leoimg.nbh.
Placed it on the SD card (root)
hold volume down and boot the phone.
i go into the red green blue screen.
then it says loading for 2 seconds.
and then i go back to the red green blue screen and nothing happends..
what i see is:
pb81100 hx-bc
spl-2.08.hspl 8g xe
cotullahspl
i assume this isnt the original spl?
what am i doing wrong?
anyone???????????
Have you tried installed HSPL3 and selecting the SPL (non HSPL) version that was the same as the shipped one.
First you need to format the SD card to fat32? It is done? ... read and follow all instrutions. There's same ambiguous information in this forum, not your fault.
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
in hXXp://forum.xda-developers.com/showthread.php?t=609477
Some how i finally managed to do it.
i used the combination of both your sugestions.
formatted the sd card and placed the file on it..
then i synced it with my pc and opened the hspl3.exe thing...
and then it went for it!
thank you both for your help!
Related
Friends,
After flashing my HSPL and my ROMS so many times, I have suddenly gone blank.
If I need to flash my phone back to it's original state, and if I do not have my original ROM, what do I do?
Currently it's booting up with a picture of an Android and a Bird ( I forgot what I flashed to get that! )
I purchased this phone in Singapore.
Any assistance will be much appreciated!
Ben
Taken from: http://forum.xda-developers.com/showthread.php?t=609477
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL3 application (You need select 2.08.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Thanks for the insight. Really forgot even what the process was called and couldn't do a read up I normally would. Appreciate your help Polo!
polo735 said:
Taken from: http://forum.xda-developers.com/showthread.php?t=609477
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL3 application (You need select 2.08.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse
Hello, First off I am quite new to XDA and i have used the search and google search with xda at the end to find this answer. I Currently run Typhoon Cynogen 2.5.3 And it ran stable.... Now the Touch Screen is completely unreponsive. I need to send it back to htc to get a replacement and i run Android on internal memory, i already tried to reflash to see if the touch works or now. Since i am still under warranty i need to find if anyone can please help....A Stock (T-Mobile) Win Mobile 6.5 rom that i can install and remove my Nand and everything that has to do with Android so it doesnt show that i voided my warranty....Please let me know...i am indeed still new at this! If possible include instructions on how to... Also it has clock work mod recovery in the hd2 that i can access with the buttons.
Tuskedwolf said:
Hello, First off I am quite new to XDA and i have used the search and google search with xda at the end to find this answer. I Currently run Typhoon Cynogen 2.5.3 And it ran stable.... Now the Touch Screen is completely unreponsive. I need to send it back to htc to get a replacement and i run Android on internal memory, i already tried to reflash to see if the touch works or now. Since i am still under warranty i need to find if anyone can please help....A Stock (T-Mobile) Win Mobile 6.5 rom that i can install and remove my Nand and everything that has to do with Android so it doesnt show that i voided my warranty....Please let me know...i am indeed still new at this! If possible include instructions on how to... Also it has clock work mod recovery in the hd2 that i can access with the buttons.
Click to expand...
Click to collapse
This has been discussed MANY times so have no idea how you couldn't find info via search.
All you need to do is..
a) Power off phone
b) Hold Volume down button
c) Press (do not hold) power button
d) Once Tri color boot screen is up, plug in USB cable.
e) Flash stock ROM from HTC site.
DONE!
I am sorry.... But Thx i Just did that and Its back to Win Mob !
Tuskedwolf said:
I am sorry.... But Thx i Just did that and Its back to Win Mob !
Click to expand...
Click to collapse
Make sure you use HSPL 4 to revert your HSPL back to 3.03.0000 SPL before sending it back in. If yocflash the most recent T-Mobile update ROM the 3.14 ROM you need to reflash it via SD card as it has SPL 3.10.0000 and HSPL 4 does not have that SPL version in it. Bit flashing via SD card will give you this SPL version if you flash the ROM I am speaking of.
To flash via SD card right click on the ROM and select rename and rename it to a .zip file and hit enter. Then right click the file again and select view, find the RUU_signed.nbh file and copy it to the root of your SD card. Don't forget to go back and rename the original file .exe again so you can use it later if you need it again. After you have copied the RUU_signed.nbh to your SD card use your File Explorer to find the file and rename it to LEOIMG.nbh. Next turn your HD2 off and hold the volume down button down while you power your HD2 back on and as soon as you see bootloader and searching on the screen let the volume down button go and follow the on screen instructions.
This will have you 100% good to go for a warranty exchange or repair.
Hmm, So you want me to take the stock Ruu File that i downloaded from t-mobile and rename that to leo.img....the HSPL on there is currently it shows -2.08.HSPL
in the triloader screen? I am still confused on what to do exactly... i already reformatted the phone with the stock Ruu. And thats what the HSPL is that shows on the Tri Color boot screen of the phone.
Tuskedwolf said:
Hmm, So you want me to take the stock Ruu File that i downloaded from t-mobile and rename that to leo.img....the HSPL on there is currently it shows -2.08.HSPL
in the triloader screen? I am still confused on what to do exactly... i already reformatted the phone with the stock Ruu. And thats what the HSPL is that shows on the Tri Color boot screen of the phone.
Click to expand...
Click to collapse
Yes you need to revert the HSPL back to SPL. HSPL is a custom SPL and you do not want this on your HD2xif youcare sending it in for warranty replacement or warranty repair. The twocways of reverting it is to flash the official ROM via SD card or use the HSPL 4 utility to revert it cause you can flash SPL as well as HSPL with it. But I recommend you use the SD card flash as the SPL with the current T-Mobile upgrade ROM is 3.10.0000 and HSPL 4 does not have this SPL.cGocto the below link if you are still confused about flashing via SD card, it will explain all.
http://forum.xda-developers.com/showthread.php?t=681317
Ok this is what it shows exactly on the tri color screen !
PB81120 SS-B3
SPL -2.08.HSPL 8G XE
Tuskedwolf said:
Ok this is what it shows exactly on the tri color screen !
PB81120 SS-B3
SPL -2.08.HSPL 8G XE
Click to expand...
Click to collapse
You do not want it to say that you want it to say.
PB81120 SS-B3
SPL -2.10.0000 8G XE
OR
SPL -3.03.0000 8G XE
Sorry my memory failed me it is 2.10.000 not 3.10.0000, so you want it tocsay onecof the to I listed
make its the .nbh file that your renaming to LEOIMG.nbh ... dont just simply rename the .exe file
Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5
Tuskedwolf said:
Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5
Click to expand...
Click to collapse
You havecto rename the file you downloaded. from .exe to .zip and then you can explore the file to find the RUU_signed.nbh file.
Tuskedwolf said:
Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5
Click to expand...
Click to collapse
the exe file is just an archieve that with in that is the .nbh file.along with the radio and the update software.. you just need to extract it using winrar or prob changing the extension from .exe to .zip... once extracted the file.with the .nbh extention is the rom.. the bootloader will only recognize .nbh... so just change the .nbh file name to leoimg and move it to the root of the sdcard and once in bootloader mode it will detect the file and flash it and remove the hspl
Ok, So i put the leoimg.nbh in the sd card booted to the Tri loader and its just stuck on that screen... its not currently connected to the computer... it says serial on the white part of the screen... How do we get it going... or start the process?
You guys said it should search after letting go of the vol down button but its not moving from the screen and theres a 1gb sd card.
Tuskedwolf said:
Ok, So i put the leoimg.nbh in the sd card booted to the Tri loader and its just stuck on that screen... its not currently connected to the computer... it says serial on the white part of the screen... How do we get it going... or start the process?
Click to expand...
Click to collapse
? make sure the .nbh file you renamed was the rom (largest one) and that you didnt just rename it to leoimg.nbh.nbh because thats a common mistake and try naming it LEOIMG capital letter... but thw bootloader should load up the file without any input from you
Also make sure it is on the root of your SD card.
How do we get it on the root... i just copied and pasted it to the micro sd card... and its all in caps! Also it doesnt just start up
Tuskedwolf said:
How do we get it on the root... i just copied and pasted it to the micro sd card... and its all in caps! Also it doesnt just start up
Click to expand...
Click to collapse
Yhe root of your SD card means it iscjust on the SD card and not in a file. So when you view your SD card you should be able to see it with out having to open a file.
oK, So, i renamed that RUu file which i made a mistake in putting it in .zip and re extracting it because i had found another Leoimg.nbh file that i tried using so, I reformatted the sd card to fat32 and but the one i found of the Ruu file.... and renamed it the "LEOIMG.nbh" and re did it... And now it picked it up its installing Radio V2 Rcust bootloader splash 1 os config data...so we shall see what happens...!
Ok, it said Update Success... Does that mean i am done after that or do i have to do anything else?!
So i formatted my sd card to NTFS and put LEOIMG.nbh into my sd card.
Now i booted my hd2 in boot loader screen and started the update.It complete sucessfully.
But after this,it reboots and when htc logo comes up with the white background,it auto reboots again.
Why is this and how can i fix this ?
Also if someone can give me the download link for the stock rom for HD2.
Can you still get in to bootloader? If so, I'd try it again. And here's the link...
http://forum.xda-developers.com/showthread.php?t=578920
http://shipped-roms.com/index.php?category=windows mobile&model=Leo
Although you're probably better downloading direct from HTC with your IMEI number - that way you'll get the right one (in theory)...here's the UK link - not sure where you are in the world...>
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
by the sdcard method you ned the correct rom for your hd2.
if you will flash another /custom rom, you need to reinstall hspl 2.08
and then flash your rom by the daf / ruu fläsher from windows and not by sdcard.
jetsetwilly said:
Can you still get in to bootloader? If so, I'd try it again. And here's the link...
http://forum.xda-developers.com/showthread.php?t=578920
http://shipped-roms.com/index.php?category=windows mobile&model=Leo
Although you're probably better downloading direct from HTC with your IMEI number - that way you'll get the right one (in theory)...here's the UK link - not sure where you are in the world...>
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Click to expand...
Click to collapse
Which one to choose but ?
Explain how please.My htc hd2 is european model.
Use the HTC link click on the one you think is the right one and check with your IMEI number (written underneath your battery).
The one i downloaded was good and i put it to the sd card and renamed it.When update was sucessfull,it reboots,and keeps rebooting.Any other way ?
Your sd card should be formatted to fat32...
http://forum.xda-developers.com/showthread.php?t=609477
extract courtesy of mskip...
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
jetsetwilly said:
Your sd card should be formatted to fat32...
http://forum.xda-developers.com/showthread.php?t=609477
extract courtesy of mskip...
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse
Well thats what I did.i followed the instructions and it keeps rebooting after the update was sucessfull.When i go to bootloader my SPL is 1.42. 0000.
Is your SD card formatted to NTFS or FAT32?
And after the flash completed, did you press the red reset button under the battery cover?
check battery pins.
also..
jetsetwilly said:
..... (You need select 2.08.0000 or 3.03.0000 in the choose screen).
Click to expand...
Click to collapse
Only tmous users should select 2.08.0000. 2.x spl is not a stock spl for regular hd2's. there are no reg stock roms that use spl 2.x.
edit - oops, double post
jetsetwilly said:
Is your SD card formatted to NTFS or FAT32?
And after the flash completed, did you press the red reset button under the battery cover?
Click to expand...
Click to collapse
Can it be that i formatted and transfered the LEOIMG file when in USB mass strg in MAGLDR 1.13? because i dont have such card reader or adapter.
Oh and also when i boot after the leoimg was done,it boots and displays some numbers at the bottom.Also the phone wont switch unless it connected with USB.
My current SPL is 1.42 0000
dazkyl, did you format to NTFS or FAT32?
Robbie P said:
dazkyl, did you format to NTFS or FAT32?
Click to expand...
Click to collapse
If im not mistaken, FAT32
Robbie P said:
dazkyl, did you format to NTFS or FAT32?
Click to expand...
Click to collapse
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .Im with stock windows mobile rom now.
Should i install android or windows phone 7 ?
dazkyl said:
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .Im with stock windows mobile rom now.
Should i install android or windows phone 7 ?
Click to expand...
Click to collapse
why not both?
samsamuel said:
check battery pins.
Click to expand...
Click to collapse
dazkyl said:
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .
Click to expand...
Click to collapse
Ahhh I love being correct,,,hehe
Iam EU version hd2...I want to go back to stock version win6.5
Iam having magldr,android energy rom....Iam passing my mobile so I want hd2 as it was when taken out from box....plz give me steps...
Thanks
Sent from my HTC Wildfire using XDA App
Google Dude
see if this works
theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
No luck...
Sent from my HTC Wildfire using XDA App
Find a WinMo Rom here http://forum.xda-developers.com/showthread.php?t=623283
Always make a backup.
1. Change .exe from rom download to .zip
2. Find file name RUU_Signed.nbh (or something like that. should be like ~270MB in size) and change name to LEOIMG.nbh
3. Put on a 4GB or less microSD card with a FAT32 format
4. insert sd into phone
5. go into bootloader by booting phone holding power and vol. down button
6. the flash should start automatically and should install stock rom/spl/radio
jdcream123 said:
Find a WinMo Rom here http://forum.xda-developers.com/showthread.php?t=623283
Always make a backup.
1. Change .exe from rom download to .zip
2. Find file name RUU_Signed.nbh (or something like that. should be like ~270MB in size) and change name to LEOIMG.nbh
3. Put on a 4GB or less microSD card with a FAT32 format
4. insert sd into phone
5. go into bootloader by booting phone holding power and vol. down button
6. the flash should start automatically and should install stock rom/spl/radio
Click to expand...
Click to collapse
Ok, tried this,
the phone is starting up in bootloader
just stays at the red green blue white screen,
pb81100 hx-bc
spl-2.08 hspl 8G XE
0x05
Cotulla SPL
0x48
is it working? i can't see that it is,
should i reboot?
hi.
there is something wrong with my usb plug on my htc hd2, it charge fine but it cannot reconize storage on computer. i run android now and would like to flash it back to stock.
have formatet the sd card and download the stock htc rom http://www.htc.com/dk/help/htc-hd2/#download
and put it over on the sd card and renamed it leoimg.nbh.
but when i go to bootloader (volume down) the white loadnníng screen appears for ½ sec. and then the coulored screen appears again... what am i doing wrong
SPL-2.08. HSPL 8G XE
Try a different sd card.
No more than 4GB, 2GB is better.
Have used 2 differend 2gb card, did not work
fischerben said:
download the stock htc rom http://www.htc.com/dk/help/htc-hd2/#download
and put it over on the sd card and renamed it
Click to expand...
Click to collapse
You extracted first, right? You don't just rename the whole downloaded file, you extract ruu_signed.nbh from the rom and rename that.
yes exactly. I did a full format and then extract the diwnloaded file and renamed it to leoimg. And put it on the sd card
When you enter bootloader and it flashes grey just for a moment it usually means either a bad .nbh file, the flash of grey is bootloader finding tyw nbh and rejecting it for whatever reason. What did you format the card to? Needs to be fat32.
Okay, yes, i formatet to fat 32 and not a quick
I now have same problem as fischerben, when trying to update ROM from SD, grey flashes and disappears. Tried with 2 gb SD, formatted to fat32, tried with ROMs downloaded from different sites. Any other solutions of this problem?
EDIT: I tried with different ROM downloaded from official site(the only one without any O2 etc addons) and i get to "Loading..." but on SPL 3.03 i get "Not allowed" and on 2.08 i get stuck on "loading".
EDIT2: I made it. Tried with million different ROMs(both older and newer ones), until with one ROM i found PN limitation number. This one finally worked, with SPL 3.03 installed(i figured that its showing right message with "not allowed" and i should just search for the right ROM).
Cheers