I have an HD2 and it had a custom rom and hardspl.
something is wrong with it so i need to send it back to the store.
i just flashed back to a shipped (dutch) rom i found in on xda.
but i think i'm doing something wrong with the hardspl.
i unpacked the shipped rom,
took out the RUU_signed.nbh and renamed it to leoimg.nbh.
Placed it on the SD card (root)
hold volume down and boot the phone.
i go into the red green blue screen.
then it says loading for 2 seconds.
and then i go back to the red green blue screen and nothing happends..
what i see is:
pb81100 hx-bc
spl-2.08.hspl 8g xe
cotullahspl
i assume this isnt the original spl?
what am i doing wrong?
anyone???????????
Have you tried installed HSPL3 and selecting the SPL (non HSPL) version that was the same as the shipped one.
First you need to format the SD card to fat32? It is done? ... read and follow all instrutions. There's same ambiguous information in this forum, not your fault.
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
in hXXp://forum.xda-developers.com/showthread.php?t=609477
Some how i finally managed to do it.
i used the combination of both your sugestions.
formatted the sd card and placed the file on it..
then i synced it with my pc and opened the hspl3.exe thing...
and then it went for it!
thank you both for your help!
I am ready to FLASH HARDSPL on my hd2 but want to backup files in the event I have to flash an original SPL on my phone for warranty issues. DFT states:
"make sure that you uninstall HSPL before sending phone for any warranty issues and they also write in their directions:
“The only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh".
Can someone please help me back up the needed files? I don’t totally understand the instructions and any help would be appreciated.
imglknight said:
I am ready to FLASH HARDSPL on my hd2 but want to backup files in the event I have to flash an original SPL on my phone for warranty issues. DFT states:
"make sure that you uninstall HSPL before sending phone for any warranty issues and they also write in their directions:
“The only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh".
Can someone please help me back up the needed files? I don’t totally understand the instructions and any help would be appreciated.
Click to expand...
Click to collapse
Hi,
You dont need to backup any files. Only way to revert back to original SPL is flash stock rom from your sdcard. By stock rom I mean rom that came preinstalled on your device. Search and read please, everything is on the forum. Try here:
http://forum.xda-developers.com/showthread.php?t=915628
I hope that helps.
I'm looking to put android on my HD2 but I got a simple question.
If I install a NAND Android on my phone and I don't like it or encounter some problems can I get windows back with a hard reset or does that option get lost when I put Android on?
I got the tip to "You simply put the stock rom you want on your SD card, rename it to leoimg.nbh and then go into bootloader by holding Volume down while powering on."
I have tried to find info about this, can anyone point me in the direction where there is a guide/tutorial on how to do this it it would be very appreciated.
Thanks for your help!
No, a hard reset won't do the trick, you will need to reflash a winmo rom to get it back, as installing a NAND rom (even magldr) removes winmo.
You can find info here
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the ********.nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
So i formatted my sd card to NTFS and put LEOIMG.nbh into my sd card.
Now i booted my hd2 in boot loader screen and started the update.It complete sucessfully.
But after this,it reboots and when htc logo comes up with the white background,it auto reboots again.
Why is this and how can i fix this ?
Also if someone can give me the download link for the stock rom for HD2.
Can you still get in to bootloader? If so, I'd try it again. And here's the link...
http://forum.xda-developers.com/showthread.php?t=578920
http://shipped-roms.com/index.php?category=windows mobile&model=Leo
Although you're probably better downloading direct from HTC with your IMEI number - that way you'll get the right one (in theory)...here's the UK link - not sure where you are in the world...>
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
by the sdcard method you ned the correct rom for your hd2.
if you will flash another /custom rom, you need to reinstall hspl 2.08
and then flash your rom by the daf / ruu fläsher from windows and not by sdcard.
jetsetwilly said:
Can you still get in to bootloader? If so, I'd try it again. And here's the link...
http://forum.xda-developers.com/showthread.php?t=578920
http://shipped-roms.com/index.php?category=windows mobile&model=Leo
Although you're probably better downloading direct from HTC with your IMEI number - that way you'll get the right one (in theory)...here's the UK link - not sure where you are in the world...>
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Click to expand...
Click to collapse
Which one to choose but ?
Explain how please.My htc hd2 is european model.
Use the HTC link click on the one you think is the right one and check with your IMEI number (written underneath your battery).
The one i downloaded was good and i put it to the sd card and renamed it.When update was sucessfull,it reboots,and keeps rebooting.Any other way ?
Your sd card should be formatted to fat32...
http://forum.xda-developers.com/showthread.php?t=609477
extract courtesy of mskip...
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
jetsetwilly said:
Your sd card should be formatted to fat32...
http://forum.xda-developers.com/showthread.php?t=609477
extract courtesy of mskip...
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse
Well thats what I did.i followed the instructions and it keeps rebooting after the update was sucessfull.When i go to bootloader my SPL is 1.42. 0000.
Is your SD card formatted to NTFS or FAT32?
And after the flash completed, did you press the red reset button under the battery cover?
check battery pins.
also..
jetsetwilly said:
..... (You need select 2.08.0000 or 3.03.0000 in the choose screen).
Click to expand...
Click to collapse
Only tmous users should select 2.08.0000. 2.x spl is not a stock spl for regular hd2's. there are no reg stock roms that use spl 2.x.
edit - oops, double post
jetsetwilly said:
Is your SD card formatted to NTFS or FAT32?
And after the flash completed, did you press the red reset button under the battery cover?
Click to expand...
Click to collapse
Can it be that i formatted and transfered the LEOIMG file when in USB mass strg in MAGLDR 1.13? because i dont have such card reader or adapter.
Oh and also when i boot after the leoimg was done,it boots and displays some numbers at the bottom.Also the phone wont switch unless it connected with USB.
My current SPL is 1.42 0000
dazkyl, did you format to NTFS or FAT32?
Robbie P said:
dazkyl, did you format to NTFS or FAT32?
Click to expand...
Click to collapse
If im not mistaken, FAT32
Robbie P said:
dazkyl, did you format to NTFS or FAT32?
Click to expand...
Click to collapse
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .Im with stock windows mobile rom now.
Should i install android or windows phone 7 ?
dazkyl said:
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .Im with stock windows mobile rom now.
Should i install android or windows phone 7 ?
Click to expand...
Click to collapse
why not both?
samsamuel said:
check battery pins.
Click to expand...
Click to collapse
dazkyl said:
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .
Click to expand...
Click to collapse
Ahhh I love being correct,,,hehe
How to restore my HD2 back to orginial factory rom? Thanks!
fred07 said:
How to restore my HD2 back to orginial factory rom? Thanks!
Click to expand...
Click to collapse
Download official ROM from htc, boot phone into HSPL with wmdc/activesync running on PC and flash. You may have to run HSPL to go back to normal SPL.
Sent from my HD2 using XDA
- Download a stock Rom from htc.com
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Sent from my HTC HD2
Task 29 or follow jwchips advice