[Q] HT2 Reformatting help Plz?! - HD2 General

Hello, First off I am quite new to XDA and i have used the search and google search with xda at the end to find this answer. I Currently run Typhoon Cynogen 2.5.3 And it ran stable.... Now the Touch Screen is completely unreponsive. I need to send it back to htc to get a replacement and i run Android on internal memory, i already tried to reflash to see if the touch works or now. Since i am still under warranty i need to find if anyone can please help....A Stock (T-Mobile) Win Mobile 6.5 rom that i can install and remove my Nand and everything that has to do with Android so it doesnt show that i voided my warranty....Please let me know...i am indeed still new at this! If possible include instructions on how to... Also it has clock work mod recovery in the hd2 that i can access with the buttons.

Tuskedwolf said:
Hello, First off I am quite new to XDA and i have used the search and google search with xda at the end to find this answer. I Currently run Typhoon Cynogen 2.5.3 And it ran stable.... Now the Touch Screen is completely unreponsive. I need to send it back to htc to get a replacement and i run Android on internal memory, i already tried to reflash to see if the touch works or now. Since i am still under warranty i need to find if anyone can please help....A Stock (T-Mobile) Win Mobile 6.5 rom that i can install and remove my Nand and everything that has to do with Android so it doesnt show that i voided my warranty....Please let me know...i am indeed still new at this! If possible include instructions on how to... Also it has clock work mod recovery in the hd2 that i can access with the buttons.
Click to expand...
Click to collapse
This has been discussed MANY times so have no idea how you couldn't find info via search.
All you need to do is..
a) Power off phone
b) Hold Volume down button
c) Press (do not hold) power button
d) Once Tri color boot screen is up, plug in USB cable.
e) Flash stock ROM from HTC site.
DONE!

I am sorry.... But Thx i Just did that and Its back to Win Mob !

Tuskedwolf said:
I am sorry.... But Thx i Just did that and Its back to Win Mob !
Click to expand...
Click to collapse
Make sure you use HSPL 4 to revert your HSPL back to 3.03.0000 SPL before sending it back in. If yocflash the most recent T-Mobile update ROM the 3.14 ROM you need to reflash it via SD card as it has SPL 3.10.0000 and HSPL 4 does not have that SPL version in it. Bit flashing via SD card will give you this SPL version if you flash the ROM I am speaking of.
To flash via SD card right click on the ROM and select rename and rename it to a .zip file and hit enter. Then right click the file again and select view, find the RUU_signed.nbh file and copy it to the root of your SD card. Don't forget to go back and rename the original file .exe again so you can use it later if you need it again. After you have copied the RUU_signed.nbh to your SD card use your File Explorer to find the file and rename it to LEOIMG.nbh. Next turn your HD2 off and hold the volume down button down while you power your HD2 back on and as soon as you see bootloader and searching on the screen let the volume down button go and follow the on screen instructions.
This will have you 100% good to go for a warranty exchange or repair.

Hmm, So you want me to take the stock Ruu File that i downloaded from t-mobile and rename that to leo.img....the HSPL on there is currently it shows -2.08.HSPL
in the triloader screen? I am still confused on what to do exactly... i already reformatted the phone with the stock Ruu. And thats what the HSPL is that shows on the Tri Color boot screen of the phone.

Tuskedwolf said:
Hmm, So you want me to take the stock Ruu File that i downloaded from t-mobile and rename that to leo.img....the HSPL on there is currently it shows -2.08.HSPL
in the triloader screen? I am still confused on what to do exactly... i already reformatted the phone with the stock Ruu. And thats what the HSPL is that shows on the Tri Color boot screen of the phone.
Click to expand...
Click to collapse
Yes you need to revert the HSPL back to SPL. HSPL is a custom SPL and you do not want this on your HD2xif youcare sending it in for warranty replacement or warranty repair. The twocways of reverting it is to flash the official ROM via SD card or use the HSPL 4 utility to revert it cause you can flash SPL as well as HSPL with it. But I recommend you use the SD card flash as the SPL with the current T-Mobile upgrade ROM is 3.10.0000 and HSPL 4 does not have this SPL.cGocto the below link if you are still confused about flashing via SD card, it will explain all.
http://forum.xda-developers.com/showthread.php?t=681317

Ok this is what it shows exactly on the tri color screen !
PB81120 SS-B3
SPL -2.08.HSPL 8G XE

Tuskedwolf said:
Ok this is what it shows exactly on the tri color screen !
PB81120 SS-B3
SPL -2.08.HSPL 8G XE
Click to expand...
Click to collapse
You do not want it to say that you want it to say.
PB81120 SS-B3
SPL -2.10.0000 8G XE
OR
SPL -3.03.0000 8G XE
Sorry my memory failed me it is 2.10.000 not 3.10.0000, so you want it tocsay onecof the to I listed

make its the .nbh file that your renaming to LEOIMG.nbh ... dont just simply rename the .exe file

Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5

Tuskedwolf said:
Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5
Click to expand...
Click to collapse
You havecto rename the file you downloaded. from .exe to .zip and then you can explore the file to find the RUU_signed.nbh file.

Tuskedwolf said:
Well the file i downloaded it seems to just be an .exe file... thats the one i was gonna rename to .nbh... that file is the same one i used to reformat the phone back to win mob 6.5
Click to expand...
Click to collapse
the exe file is just an archieve that with in that is the .nbh file.along with the radio and the update software.. you just need to extract it using winrar or prob changing the extension from .exe to .zip... once extracted the file.with the .nbh extention is the rom.. the bootloader will only recognize .nbh... so just change the .nbh file name to leoimg and move it to the root of the sdcard and once in bootloader mode it will detect the file and flash it and remove the hspl

Ok, So i put the leoimg.nbh in the sd card booted to the Tri loader and its just stuck on that screen... its not currently connected to the computer... it says serial on the white part of the screen... How do we get it going... or start the process?

You guys said it should search after letting go of the vol down button but its not moving from the screen and theres a 1gb sd card.

Tuskedwolf said:
Ok, So i put the leoimg.nbh in the sd card booted to the Tri loader and its just stuck on that screen... its not currently connected to the computer... it says serial on the white part of the screen... How do we get it going... or start the process?
Click to expand...
Click to collapse
? make sure the .nbh file you renamed was the rom (largest one) and that you didnt just rename it to leoimg.nbh.nbh because thats a common mistake and try naming it LEOIMG capital letter... but thw bootloader should load up the file without any input from you

Also make sure it is on the root of your SD card.

How do we get it on the root... i just copied and pasted it to the micro sd card... and its all in caps! Also it doesnt just start up

Tuskedwolf said:
How do we get it on the root... i just copied and pasted it to the micro sd card... and its all in caps! Also it doesnt just start up
Click to expand...
Click to collapse
Yhe root of your SD card means it iscjust on the SD card and not in a file. So when you view your SD card you should be able to see it with out having to open a file.

oK, So, i renamed that RUu file which i made a mistake in putting it in .zip and re extracting it because i had found another Leoimg.nbh file that i tried using so, I reformatted the sd card to fat32 and but the one i found of the Ruu file.... and renamed it the "LEOIMG.nbh" and re did it... And now it picked it up its installing Radio V2 Rcust bootloader splash 1 os config data...so we shall see what happens...!

Ok, it said Update Success... Does that mean i am done after that or do i have to do anything else?!

Related

Help with restoring phone to stock ROM.

I have to send away my phone for repair (USB port is dying) and i was hoping to restore everything to stock just to make sure there are no problems when they take a look at it.
I'm running 'Duttys Leo Multi-Lang V1.1' ROM but i installed this way back in January and to be honest i can't even remember how i went about doing it in the first place.
If anybody could tell me where to start i'd be really grateful.
sarngate said:
I have to send away my phone for repair (USB port is dying) and i was hoping to restore everything to stock just to make sure there are no problems when they take a look at it.
I'm running 'Duttys Leo Multi-Lang V1.1' ROM but i installed this way back in January and to be honest i can't even remember how i went about doing it in the first place.
If anybody could tell me where to start i'd be really grateful.
Click to expand...
Click to collapse
download official stock ROM from your carrier site, or HTC site, and install it by clicking on .exe file
Will that remove the HSPL too ?
sarngate said:
Will that remove the HSPL too ?
Click to expand...
Click to collapse
If you flash it via sd card. Right click on the exe stock rom file downloaded and select Extract here. Then copy to .nbh file to the root of your sd card. Ensure it is named leoimg.nbh and then flash from the card.
you can use HSPL to change it to 1.42.0000 SPL. there is an option there
Sultan1993 said:
you can use HSPL to change it to 1.42.0000 SPL. there is an option there
Click to expand...
Click to collapse
Only if using HSPL2. As he installed the rom in January, HSPL2 was not yet out, so I'm assuming he used HSPL1
The SPL is indeed 1.42.0000, im just downloading a ROM now and i'll report back in a second
I had HSPL on my phone and used HSPL2 to remove it - works fine
Ok so i copied the .nbh to the SD Card, renamed it and restarted the phone while holding down the volume button but it just took me to the Bootloader screen.
Do i have to do anything specific to get it to install ?
sarngate said:
Ok so i copied the .nbh to the SD Card, renamed it and restarted the phone while holding down the volume button but it just took me to the Bootloader screen.
Do i have to do anything specific to get it to install ?
Click to expand...
Click to collapse
Did you format the sd-card in FAT32?
It should ask you to press power button or something to flash if everything is right
EddyOS said:
I had HSPL on my phone and used HSPL2 to remove it - works fine
Click to expand...
Click to collapse
Thanks m8, never knew that - one can always learn something new
sarngate said:
Ok so i copied the .nbh to the SD Card, renamed it and restarted the phone while holding down the volume button but it just took me to the Bootloader screen.
Do i have to do anything specific to get it to install ?
Click to expand...
Click to collapse
When the phone boots into bootloader it should identify the leoimg file on the sd card and allow you the option to flash by pressing the power button. Did you copy the file to the root of the storage card, ie not to any sud-folder? If so then it could be that you may need to try another sd card as not all cards work with this. The 2gb cards are said to be best.
You can also try to just run the .exe normally from the pc to flash the rom and then use hspl2 to change your spl back as suggested by EddyOS.
Yeah, I didn't think it wouldn't work - just put my stock 1.66 ROM back on and then changed the SPL back using HSPL2 - job a goodun!!
Anyone wanna buy an HD2?
Thanks for the advice guys, i'm off to work now but i'll have a look at it when i get home.
sarngate said:
Ok so i copied the .nbh to the SD Card, renamed it and restarted the phone while holding down the volume button but it just took me to the Bootloader screen.
Do i have to do anything specific to get it to install ?
Click to expand...
Click to collapse
you have to put custom ruu together with the .nbh file in the root directory of the card
jigners said:
you have to put custom ruu together with the .nbh file in the root directory of the card
Click to expand...
Click to collapse
Not true , only the .nbh file
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse

Help i cant remove hspl

Im sending my phone back to htc so I flashed back a standard rom. I thought this would remove hspl but it didnt now Im ****ting my pants. How do i get it off?
Did you flash stock rom via sd card? That is the only way that flashing a stock rom removes hspl. Otherwise the much simpler method is to rerun HSPL2 and select your original spl (ending in 0000) - assuming you can remember which spl you were on.
how do i flash the rom via sd?
elgrego4 said:
how do i flash the rom via sd?
Click to expand...
Click to collapse
Find nbh file of the rom you want, copy to root of sd card and rename it to LEOIMG.nbh, boot into bootloader and follow instructions. If it doesn't pick up the image, try reformatting sd card (preferably a small one ie 2gb) to FAT32 and retry.
Ive renamed the the file but bootloader does nothing, i only have a 16gb sd. I also put the whole rom on the card and selected it using file explorer and now the windows colour dots are just going around in a circle.
Did you copy just the .nbh file from the rom to your sd card and rename that and not the entire exe file? You also won't be able to flash via file explorer.
Seriously though if you can't flash via sd card (bigger sd cards don't alsways work - although my 16gb card does) just do the second and much easier option I gave you above, ie flash the rom via exe as you have done and then run HSPL2 and select your stock spl.
I cant do that cos now windows 7 wont install the bloody drivers lol. Im FUBAR'd
Be careful in your rom selection. This should ALWAYS be stressed when telling people how to do this. It's not simply a case of getting the one you want. You should always try to get the original rom your phone came with, or at a minimum one that the htc site recommends when you enter your country and phone serial. Flashing a bad rom via sd is pretty much the only way to brick your phone. This should not be forgotten or taken for granted.
That said, download the correct rom, rename to leoimg.nbh, stick it on the root of your sd card. Power off phone, insert sd card, hold volume down, press power.
(yeah I know clyde just typed the instructions, I just like them explained this way).
Sent from my HD2 NANDroid using XDA App
elgrego4 said:
Ive renamed the the file but bootloader does nothing, i only have a 16gb sd. I also put the whole rom on the card and selected it using file explorer and now the windows colour dots are just going around in a circle.
Click to expand...
Click to collapse
Have you double checked you card is Fat 32? I couldn't get a leoimg.nbh file recognised, until I found a similar post saying that it had to be Fat32. My card was in plain old fat...
MattOG said:
Be careful in your rom selection. This should ALWAYS be stressed when telling people how to do this. It's not simply a case of getting the one you want. You should always try to get the original rom your phone came with, or at a minimum one that the htc site recommends when you enter your country and phone serial. Flashing a bad rom via sd is pretty much the only way to brick your phone. This should not be forgotten or taken for granted.
That said, download the correct rom, rename to leoimg.nbh, stick it on the root of your sd card. Power off phone, insert sd card, hold volume down, press power.
(yeah I know clyde just typed the instructions, I just like them explained this way).
Sent from my HD2 NANDroid using XDA App
Click to expand...
Click to collapse
Good point m8, I assumed that as he had already flashed the rom via exe that he had the right one. (I know that's a dangerous assumption given the level of some of the users on this site as some shouldn't be authorised to use anything more technical than a tv remote - no offence elgrego4 ). Noted and I will include that important statement in future advice given
I've just seen from your signatrure elgrego4 that your rom is listed as LEO70 (ie WP7). Did you reformat your sd card after using WP7?
elgrego4 said:
Im sending my phone back to htc so I flashed back a standard rom. I thought this would remove hspl but it didnt now Im ****ting my pants. How do i get it off?
Click to expand...
Click to collapse
Turn the phone off..Then turn it on while holding volume down. This will take you to the bootloader menu( rainbow color). Plug the phone unto your PC then flash the original ROM that you downloaded from HTC site.No need to sync..Hope this will help.
Hey man if you want to remove HSPL you can just run the HSPL program from your pc with your phone connected in bootloader. It's the same procedure as installing HSPL, but now you must select SPL 2.08.000 instead of HSPL 2.08 while running the program.
I did it this way while I had to send my phone back and had no problems with it =)
You can check your SPL version in Bootloader.
yes it was fat 32, ive borrowed a 2gig so i will try that next
Its flashing with the 2gb card so fingers and everything else crossed
Keep us posted pls. I'm thinking also to bring back because of pixel error on the screen.
Sent from my HTC HD2 using XDA App
it says update success, do i just reboot it now?
rebooted, not bricked. Will check the bootloader in a minute
elgrego4 said:
it says update success, do i just reboot it now?
Click to expand...
Click to collapse
Yes........
SPL-3.03.000 is on now. Thanks for the help guy Knowing my luck htc wont find a fault
Pleasure m8, good luck.
Was 3.03 your original spl? If so I guess you do know it's a mission to get back to flash hspl once you get your phone back. You will first have to downgrade your rom to get to a lower version spl and then run hspl.

[Q] Flashed back to windows mobile but auto reboot at htc boot screen.

So i formatted my sd card to NTFS and put LEOIMG.nbh into my sd card.
Now i booted my hd2 in boot loader screen and started the update.It complete sucessfully.
But after this,it reboots and when htc logo comes up with the white background,it auto reboots again.
Why is this and how can i fix this ?
Also if someone can give me the download link for the stock rom for HD2.
Can you still get in to bootloader? If so, I'd try it again. And here's the link...
http://forum.xda-developers.com/showthread.php?t=578920
http://shipped-roms.com/index.php?category=windows mobile&model=Leo
Although you're probably better downloading direct from HTC with your IMEI number - that way you'll get the right one (in theory)...here's the UK link - not sure where you are in the world...>
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
by the sdcard method you ned the correct rom for your hd2.
if you will flash another /custom rom, you need to reinstall hspl 2.08
and then flash your rom by the daf / ruu fläsher from windows and not by sdcard.
jetsetwilly said:
Can you still get in to bootloader? If so, I'd try it again. And here's the link...
http://forum.xda-developers.com/showthread.php?t=578920
http://shipped-roms.com/index.php?category=windows mobile&model=Leo
Although you're probably better downloading direct from HTC with your IMEI number - that way you'll get the right one (in theory)...here's the UK link - not sure where you are in the world...>
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Click to expand...
Click to collapse
Which one to choose but ?
Explain how please.My htc hd2 is european model.
Use the HTC link click on the one you think is the right one and check with your IMEI number (written underneath your battery).
The one i downloaded was good and i put it to the sd card and renamed it.When update was sucessfull,it reboots,and keeps rebooting.Any other way ?
Your sd card should be formatted to fat32...
http://forum.xda-developers.com/showthread.php?t=609477
extract courtesy of mskip...
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
jetsetwilly said:
Your sd card should be formatted to fat32...
http://forum.xda-developers.com/showthread.php?t=609477
extract courtesy of mskip...
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse
Well thats what I did.i followed the instructions and it keeps rebooting after the update was sucessfull.When i go to bootloader my SPL is 1.42. 0000.
Is your SD card formatted to NTFS or FAT32?
And after the flash completed, did you press the red reset button under the battery cover?
check battery pins.
also..
jetsetwilly said:
..... (You need select 2.08.0000 or 3.03.0000 in the choose screen).
Click to expand...
Click to collapse
Only tmous users should select 2.08.0000. 2.x spl is not a stock spl for regular hd2's. there are no reg stock roms that use spl 2.x.
edit - oops, double post
jetsetwilly said:
Is your SD card formatted to NTFS or FAT32?
And after the flash completed, did you press the red reset button under the battery cover?
Click to expand...
Click to collapse
Can it be that i formatted and transfered the LEOIMG file when in USB mass strg in MAGLDR 1.13? because i dont have such card reader or adapter.
Oh and also when i boot after the leoimg was done,it boots and displays some numbers at the bottom.Also the phone wont switch unless it connected with USB.
My current SPL is 1.42 0000
dazkyl, did you format to NTFS or FAT32?
Robbie P said:
dazkyl, did you format to NTFS or FAT32?
Click to expand...
Click to collapse
If im not mistaken, FAT32
Robbie P said:
dazkyl, did you format to NTFS or FAT32?
Click to expand...
Click to collapse
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .Im with stock windows mobile rom now.
Should i install android or windows phone 7 ?
dazkyl said:
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .Im with stock windows mobile rom now.
Should i install android or windows phone 7 ?
Click to expand...
Click to collapse
why not both?
samsamuel said:
check battery pins.
Click to expand...
Click to collapse
dazkyl said:
Never mind.I fixed it.It was from the battery gold pings.i re-arranged them and it switched .
Click to expand...
Click to collapse
Ahhh I love being correct,,,hehe

[HELP] Cannot go back to stock!!!

I tried to install a new rom via my SD card and it refused to boot, it simply stayed at the HTC logo. So now, I have no working OS on my phone. I tryed to go back to stock Winmo 6.5, following all instructions, but my bootloader won't load the .nbh file, it simply stays idle at the Tri color screen. I've tried switching SD cards, installing other ROMS via SD to no avail. Also tried the HSPL 4 method to get back to stock, but I have no working windows OS on the phone, so I cannot synch with WMDC. I've tried everything.
I would like to keep working with android on my phone, but if i have to start from scratch then that would be fine also. Can anyone help me? I have no other phone ATM.
Specs:
MAGDLR 1.13, CWM 3.0.0.5, SPL 2.08 HSPL, Radio 2.15.50
Can anyone please help!?????????????? I really need to get my phone up and running :[
No need for wmdc sync.
Phone into bootloader, connect USB, flash rom.
Thats what I'm saying, the bootloader should automatically detect the Ship rom when turned on to the tri color screen, but it doesnt, nothing happened. I downloaded the ROM straight from T-Moblie
I didn't say flash from SD.
What I said was you don't need a booted rom to use USB flashing,,, no need for wmdc.
Phone into bootloader, connect USB, count to 5, on the PC run the flash. Hspl.exe also can be run like this.
As to why the leoimg.nbh doesn't start, its usually one of two reasons..
1 the SD card should be 4gb or smaller, and
2 people sometimes don't extract ruu_signed.nbh, they just rename the rom.exe.
samsamuel said:
I didn't say flash from SD.
What I said was you don't need a booted rom to use USB flashing,,, no need for wmdc.
Phone into bootloader, connect USB, count to 5, on the PC run the flash. Hspl.exe also can be run like this.
As to why the leoimg.nbh doesn't start, its usually one of two reasons..
1 the SD card should be 4gb or smaller, and
2 people sometimes don't extract ruu_signed.nbh, they just rename the rom.exe.
Click to expand...
Click to collapse
When you say "run the flash" do you mean run the RUU_signed exe file? Also, I followed the instructions to get back to stock to a T, even swapped out my 16gb card for a 2gb with the same image and tried it. Should i just give up on flashing it via SD?
necrid11 said:
When you say "run the flash" do you mean run the RUU_signed exe file?
Click to expand...
Click to collapse
correct...
necrid11 said:
Also, I followed the instructions to get back to stock to a T, even swapped out my 16gb card for a 2gb with the same image and tried it. Should i just give up on flashing it via SD?
Click to expand...
Click to collapse
just to confirm you should be unzipping the .exe file, extracting the ruu_signed.nbh file, renaming that file to leoimg.nbh and using that on the sd card?
You don't rename the whole .exe
samsamuel said:
correct...
just to confirm you should be unzipping the .exe file, extracting the ruu_signed.nbh file, renaming that file to leoimg.nbh and using that on the sd card?
You don't rename the whole .exe
Click to expand...
Click to collapse
Absolutely. Formated the SD, extracted the file from the zip, extracted the exe file, got the RUU_signed, renamed it leoimg.nbh, slide it over to the SD card and put the phone in bootloader....and nothing happened.

Get to stock version

Iam EU version hd2...I want to go back to stock version win6.5
Iam having magldr,android energy rom....Iam passing my mobile so I want hd2 as it was when taken out from box....plz give me steps...
Thanks
Sent from my HTC Wildfire using XDA App
Google Dude
see if this works
theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
No luck...
Sent from my HTC Wildfire using XDA App
Find a WinMo Rom here http://forum.xda-developers.com/showthread.php?t=623283
Always make a backup.
1. Change .exe from rom download to .zip
2. Find file name RUU_Signed.nbh (or something like that. should be like ~270MB in size) and change name to LEOIMG.nbh
3. Put on a 4GB or less microSD card with a FAT32 format
4. insert sd into phone
5. go into bootloader by booting phone holding power and vol. down button
6. the flash should start automatically and should install stock rom/spl/radio
jdcream123 said:
Find a WinMo Rom here http://forum.xda-developers.com/showthread.php?t=623283
Always make a backup.
1. Change .exe from rom download to .zip
2. Find file name RUU_Signed.nbh (or something like that. should be like ~270MB in size) and change name to LEOIMG.nbh
3. Put on a 4GB or less microSD card with a FAT32 format
4. insert sd into phone
5. go into bootloader by booting phone holding power and vol. down button
6. the flash should start automatically and should install stock rom/spl/radio
Click to expand...
Click to collapse
Ok, tried this,
the phone is starting up in bootloader
just stays at the red green blue white screen,
pb81100 hx-bc
spl-2.08 hspl 8G XE
0x05
Cotulla SPL
0x48
is it working? i can't see that it is,
should i reboot?

Categories

Resources