Database Users

Help needed please

Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33

http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
or
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen

Hi there a big thanx to you for doing this for me this works great im so happy now.The 1st link is the 1 that work better for me.Its still loading up all the softwere onto my mda pro if ive got anoth problem ill get back to you.What a great site.You have just made my day.Thanx mono33
PS Im so sorry if i posted this in more that 1 place on this fourm but i did not know where to post it.

Trinity stuck in boot-loader mode after bad flashing , pls help

Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.

Thx all of ya , problem solved.

sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.

gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.

Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss

Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!

[Q] [q] black screen of death after failed android install

Good morning.
im a newbie at updating the HTC HD 2 Leo i have for T-Mobile (which is probably WHY i shouldnt have messed with it in the 1st place...).
i tried downloading the android gingerbread rom onto my phone last night and while downloading the software their was a partition error and my phone was stuck afterwards rebooting on the failed software dowload (would get stuck on a black screen only showing the HTC letters in green.)
i FURTHER screwed it up by trying to put it in bootloader mode and trying to install the Original software i found which i downloaded off a website for the factory version of my HTC HD 2 Leo.
NOW it only shows a black screen.. the computer cant sync my phone, the battery light is not showing and no signs of life...it wont even let me go into bootboader mode...all it says when i plug it in to my USB port on the computer is under hardware found " Qualcomm CDMA Technologies MSM"...
someone PLEASE help this lost noob... much appreciated

wow! erm.... have you tried a hard reset? recovery software might still be on there, with any hope.....

i tried , but the hd2 doesnt show ANYTHING on the screen, i tried holding both buttons and pushing the power on button but the factory screen wont pop up because the screen stays permenantly black

Sounds as though you flashed a T-MObile USA with a ROM with a .51 RADIO; if that is the case then the phone is bricked.
You could always telephone HTC and say you charged your phone overnight and it didn't respond the next day - with no mention of flashing the phone.
As you have found out flashing before reading can be fatal (for the phone) and expensive. I have flashed quite a few HTC WinMo phones, but for every different phone I read then reread the instructions.

thanx i appreciate it , it sux that i cant get it fixed.

[Q] help on bootloader

hi,
first of all i am sorry if my english is bad
i have a friend that he has mytouch 3g and he has a problem. his device sometimes was stuck so he took out the battery and then insert and then everything was fine. but sometime he get into the bootloader menu and the device didn't come up. he did nothing with it, he didn't try to change anything. his device was in 1.6 android version.
i have a picture of the device in the bootloader but i can't upload it because i don't have 8 messages.
what should he do?
i have motorla defy it's different from my phone so i don't know really what to do, i guess the solution will be flashing other rom.

[Q] Mytouch 3g Fender Edition Help!

A while back I got the Mytouch 3g fender edition from T-Mobile and tried to root then flash a ROM to it. It shut off and never turned back on. I've tried everything but as of today I got it back out and tried again. I noticed when I plug it in I get a orange light (1st Picture) and if I hold the ball and power button the light turns blue (2nd Picture) As for that nothing else works. Any body know how I could get it working again? I will try anything to get it fixed.
In advanced, thanks for the help!

me too
i have the same situation , but what i did , i eras all thing from fastboot : fastboot eras bootloader , hboot , recovery .... then when im reach the flash step order i restart phone by mistake .........
i think now the only fix is the (( JTAG )) BOX , plz let me know if u found another way to fix that