hi,
first of all i am sorry if my english is bad
i have a friend that he has mytouch 3g and he has a problem. his device sometimes was stuck so he took out the battery and then insert and then everything was fine. but sometime he get into the bootloader menu and the device didn't come up. he did nothing with it, he didn't try to change anything. his device was in 1.6 android version.
i have a picture of the device in the bootloader but i can't upload it because i don't have 8 messages.
what should he do?
i have motorla defy it's different from my phone so i don't know really what to do, i guess the solution will be flashing other rom.
Related
ok since i got this phone i have had problems,but i updated it to 6.1 and it got better (locking up all the time)then i played with a bunch of custom roms,then the other day it just decided not to turn on at all,before it would just lock up at the htc screen,now when i turn it on the green light is on and nothing happnes?? i force it in the loader screen and have tryed getting it to take a rom that way and it just gets stuck and says loading but dosnt do anything? the update utilitly does not work either it keeps saying image is currupt?
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Hope it helped and good luck,
What version bootloader do you have? What image are you trying to load in bootloader.
i have opilo_240. i cant load any image nothing will take,no roms no radio no nothing
Are you sure you are naming it correctly and on a 2GB or less FAT32 sd card.
i have tryed it a million times, yes i have been typing it right.it recognizes it and starts to load it but then locks up. is there a way i can get this loader off the phone and take it back to original? maybe the loader is crap so if i try and put a original loader back in it will take a install again but i cant find any thing
Not possible that I know of to change bootloader without softspl which needs WM to run.
Where are you getting these images? What is your provider. Please update this in your profile so we can help easier.
my provider is metro pcs but its a sprint phone,i have tryed the sprint/htc 6.1 update then i tryed a couple of ryan mogul 6.5 roms.see since i got this phone (used) it had problems loading from the htc screen,sometimes i would have to soft reset about 5 times before it would load the o/s then sometimes it would go days without a problem,it did this with the stock image then got better with the 6.1 and thought it was good then i played with a couple roms and they all loaded ok but the phone was getting worse when locking up it would do it all the time,then i went back to the 6.1 sprint rom and it didnt get better just worse,then it wouldnt get past the htc screen,so i tryed again to put back to stock and now when i turned the phone on it vibrates then just the green light turns on,when i try and hard reset it just instantly says complete,i can boat to loader and connect to pc fine but when i try and load a image from cpu it goes to 1% then stops and says image file is corrupt, is my phone junk? i have a brand new touch pro coming today but i would like to get this mogul up and running its just a shame cause i loved this phone when it worked,im ready to throw it in the garbage
Get the .nbh from the following sprint .exe and try it on the sd card. If you can get into bootloader your phone shouldnt be a brick. Mtty might be an option but that isnt something I can teach you how to do very well.
ftp://ppcgeeks.com/Titan/CarrierRom..._RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
Hey guys, need some help if possible.....
About 3-4 days ago, I got a notification on my g1 to install a new update, I accepted and the download process started and ended as usual.
When the phone rebooted at the end of everything, I see the original t-mobile design, then the android logo, and then a black screen... and thats it, my phone just remains black, no sign of life.
I cant power the device off, I have to pull the battery out, I tried soft and hard reset but nothing works...
Please someone, anyone, save my g1 !!!!
Is your phone stock? Rooted? ROM? SPL? More information would help...
If it's a stock US phone with the original SPL you could try flashing RC29 and letting it upgrade from there again.
please i need help,here is the historique of my htc
i already tryed to read code using lmxkey,after connect to soft phone dead and cant power on
now even with volume up and power on phone cant give any signal no boot mode
thx
hello every body me still waiting for any solution where is expert
Did you do anything to your device before this behaviour,
With the information that you have provided, I can assume that you have a battery problem since your phone doesn´t boot up or gets into bootloader.
Otherwise, if you have flashed incorrectly (eg. flashing a rom from other phone to your device by mistake) or messed with the phone...that´s definitely symptoms of a bricked phone.
Good morning.
im a newbie at updating the HTC HD 2 Leo i have for T-Mobile (which is probably WHY i shouldnt have messed with it in the 1st place...).
i tried downloading the android gingerbread rom onto my phone last night and while downloading the software their was a partition error and my phone was stuck afterwards rebooting on the failed software dowload (would get stuck on a black screen only showing the HTC letters in green.)
i FURTHER screwed it up by trying to put it in bootloader mode and trying to install the Original software i found which i downloaded off a website for the factory version of my HTC HD 2 Leo.
NOW it only shows a black screen.. the computer cant sync my phone, the battery light is not showing and no signs of life...it wont even let me go into bootboader mode...all it says when i plug it in to my USB port on the computer is under hardware found " Qualcomm CDMA Technologies MSM"...
someone PLEASE help this lost noob... much appreciated
wow! erm.... have you tried a hard reset? recovery software might still be on there, with any hope.....
i tried , but the hd2 doesnt show ANYTHING on the screen, i tried holding both buttons and pushing the power on button but the factory screen wont pop up because the screen stays permenantly black
Sounds as though you flashed a T-MObile USA with a ROM with a .51 RADIO; if that is the case then the phone is bricked.
You could always telephone HTC and say you charged your phone overnight and it didn't respond the next day - with no mention of flashing the phone.
As you have found out flashing before reading can be fatal (for the phone) and expensive. I have flashed quite a few HTC WinMo phones, but for every different phone I read then reread the instructions.
thanx i appreciate it , it sux that i cant get it fixed.
Ok..
A few weeks ago I ''bricked'' my phone when I tried to flash a sbf, hoping to get the phone a higher/better OS than motoBLUR. But it went really wrong, I couldnt start my phone after flashing succesfully.. Later on I kinda came to the conclusion that I flashed the wrong sbf. Since my phone is a me525 and I used a file for mb525. What the result was that my phone turned black and it was showing a white led when charged in the pc. I have searched for quite a while for a sbf. that suits my phone to flash it again. So if there is a kind person who could help me I would be very grateful!
p.s. I'm new into all this developing with OS' and stuff..
Same issue!
Tungieee said:
Ok..
A few weeks ago I ''bricked'' my phone when I tried to flash a sbf, hoping to get the phone a higher/better OS than motoBLUR. But it went really wrong, I couldnt start my phone after flashing succesfully.. Later on I kinda came to the conclusion that I flashed the wrong sbf. Since my phone is a me525 and I used a file for mb525. What the result was that my phone turned black and it was showing a white led when charged in the pc. I have searched for quite a while for a sbf. that suits my phone to flash it again. So if there is a kind person who could help me I would be very grateful!
p.s. I'm new into all this developing with OS' and stuff..
Click to expand...
Click to collapse
Hey..! im on the same problem..cant get my phone to boot up normally ..but the computer still detect the phone even if its black screen well hope we get help..i need my phone back ..
I know just a couples of days ago that you have encountered "soft" or "fake brick": just go to bootloader mode as usual and try flash a new SBF. It is in boot loader, just no screen display.